Beruflich Dokumente
Kultur Dokumente
instructions
WWW.XK-INNOVATIONS.COM
E-MAIL:Sales@xk-innovations.com
Summarize:
The controller supports a variety of models, such as fixed-wing, multicopter and helicopter, with the regulatory function of the model
Warning: parameters, support many types of aircraft storage,Uses 2.4GHZ FUTABA S-FHSS communication Agreement, with long
distance error correction capability and strong anti-interference ability and other characteristics.This controller is simple and
The controller uses with 6S AA batteries, prohibited to use the AA battery and li-battery do not meet the product.
convenient for operation, the following is a detailed description of the controller.
The controller is not a toy, it’s not suit for the children under the age of 14 who do not have a rich experience of handling.
Suggest you play with the person who have rich experience.The manufacturer and distributors are not responsible for the uses. The technical parameters of the controller:
please be sure to read the instructions carefully before use: Battery:6 pcs 1.5V AA battery. Operating Voltage:6-9V Working current:100-150MA Transmit power:2+DBM
The product passed the related certification, such as FCC CE ROHS and so on. Controller Introduction:
Catalogue:
Control Panel and Switch Description
Warning 1
Catalogue 1 6CH/IDLE Antenna TH.HOLD
Summarize 2
The technical parameters of the controller 2
Controller Introduction 2
Monitor Description 3
The controller standby mode 3
Fixed-wing control mode 4 5GH/Gyro
1)Switch Description 4 3D/6G
2)Forward and reverse channel set 4
Throttle Aileron Elevator
3)The size of the rudder parameter settings 4
Throttle digital trim digital stick
4)E curve (EXP) parameter settings 5
Elevator digital trim
5)Throttle curve ( T.curve) parameter settings 5 Rudder digital trim
Aileron digital trim
6)Mixing Set 6
menu
Helicopter mode setting parameter adjustment 7 Navigation and
1)Switch Description confirmation key
7 exit
2)forward and reverse channel set 7
3)The size of the rudder amount parameter settings 7
4)E curve (EXP) parameter settings 8 flying rings
1 2
Channel indication
6 channel flap
The controller set up parameters are completed within the above picture, the whole menu is hierarchical,
structured, easy to operate, the whole LED display is :
1) Boot basic display, single frame corresponding channel represents District, conducted channel
2)Forward and reverse channel set
indication for parameter settings.
2) Advanced Menu Mode Functional Description Setting steps Description
3) Helicopter mode display 1 Power status
2 Press the MODE button for one second, the display
4) Fixed-Wing Airplane mode display shows Reverse and 123456 flashing The pros and cons
when the transmitter
According to 3 Press the OK button to a channel flashing, Reverse and 23456
The controller standby mode: the installation
stops flashing.
4 By rotating the navigation keys to select the channel to be set, the
output is set to reflect
the current setting
The controller of each switch set up in the normal position ( switch position allocated to the controller back cover ), corresponding channel indicators flashing. status without saving
location servers, 5 Press the OK button, the corresponding channel and reverse directions the data, you must
open the controller into the standby mode, LED display flight parameters and related information for the current flashing, the other channels are hidden. press the OK button
set the action to save the settings
mode. Can be classified the parameters Of fixed-wing airplane Scheduling, Helicopter Scheduling,advanced Result set. Users set
forward and the throttle forward
Scheduling transfer parameters and special features. when controller standby, press mode button for 1-2 seconds
backward to and backward in time
to enter the common parameter adjustment. When controller standby, press MODE key plus BACK button 1-2 must be doubly
accommodate careful, the user is
seconds to enter the advanced parameter adjustment. 6 Turn the channel through the navigation key indication set in the main motor
operational does not install propeller
1)Fixed-wing Airplane Scheduling: module on or below the position
needs. case, to prevent sudden
Function: forward and reverse channel settings 7 Press the OK button to save the settings back to the channel, rotation of the propeller
and the channel into the next set of positive and negative according to injury.
The size of the rudder volume setting
8 Press the BACK button to exit after setting
EXP curve setting
Throttle curve setting 3)The size of the rudder parameter settings
MIXES channel mixing set ( delta wing mixing V -tail mixing Flaperonsmixing )
Functional Description Setting steps Description
2)Helicopter Scheduling
Function: forward and reverse channel settings 1 Standby When you select the
channel, the numerical
Set elevator aileron 2 Press the MODE button for one second to enter the menu,
The size of the rudder volume setting display indicates the
rudder direction the screen Reverse and 123456 flashes current size of the rudder
EXP curve setting 3 Rotate right through the navigation will appear D / R with 124 channel parameter values.
three channels large When the size of the rudder
Throttle curve setting ( typically throttle 3D accelerator ) and triangular box disposed, each channel
amount of small 4 Press the OK button to enter, D / R and triangular box with 24 stops has four setting parameters,
Pitch curve setting ( general 3D pitch) amount of rudder flashing, flashing box quantized values respectively, D / R switch
and the corresponding left
Gyroscope parameter settings around the joystick and right or up and down to
3)Advanced Scheduling up and down to set
switch rocker same channel
parameters. When using
5 By rotating the navigation keys to adjust the value of the amount of
Function: Module settings ( optional module 10 groups ) the desired values,
rudder, the size of the rudder switch settings.Large or small rudder,
the MODE key long press
for one second to restore
Model selection ( Helicopter fixed-wing Airplane ) this function is used shake joystick is used to select the corresponding channel to adjust the the default values are
synchronized. The size of
CCPM mixing control mode selection ( helicopter only) to adapt the itinerary rudder.Belonging to the left part or right, or upper part or lower part, if the rudder volume setting
Setting parameters are not satisfied, then press the MODE button ange -125 % to 125 %,
or mediation server
Servo midpoint settings for one second , quick recovery to Factory defaults. negative values indicate the
manipulate feel opposite direction with the
MODE1/MODE2) Control mode setting (MODE1 / MODE2) 6 Press the OK button to save the parameters and enter into the next channel.
rocker,rocker swing motion
7 Press BACK 2 Down key to exit. direction
3 4
The figure below is a description of the role of the throttle curve index of output
4)E curve (EXP) parameter settings
6)Mixing Set
The following diagram depicts the role of exponential curve manipulation of output
Joystick exponential value of 0 state Functional Description Setting steps Description
1 Power on No display channel
2 Press the MODE button for one second, the screen Reverse and area represents no
123456 flashes mixing channel display
3 Rotate right through the navigation keys appear Mixes with123 flashing shows a
4 Press the OK button to enter, 123 flashing and mixes stop flashing.
representative of the
Manipulate output Manipulate output Manipulate output 5 By rotating the navigation keys to set the mode, the
delta wing mixing
Provides users corresponding mixing mode indicator flashes corresponding
channel display area
Joystick swing angle Joystick swing angle Joystick swing angle 6 Choosing to be set after mixing module press the OK button to enter,
with three 2 V -tail mixing
appear to be mixing the current channel and the main channel flashing
commonly channel display area
7 By the navigation keys to select the channel to be set press the OK
mixing mode 3 Flaperons mixing
button to enter, the current channel and the quantization module
wing mixing data set
for fixed-wing. ( pre- mixing amount of 80% ) is flashing
value -100 % - 100%,
8 After mixing proportions set by the navigation keys Press the OK
a negative value
button to enter the secondary channel mixing
Joystick exponential value of 0 Joystick exponential curve is 60 Joystick exponential value - is 60 indicates a direction
9 Press the OK button to confirm the setting and maintaining the data
until after the second channel is set up. opposite to the
10 Double-click the BACK button to exit the setting under 2 channel operation direction
digital display indicates the current mixing module. of the joystick
5)Throttle curve ( T.curve) parameter settings
5 6
Helicopter mode setting parameter adjustment 4)E curve (EXP) parameter settings
1) Switch Description
Functional Description Setting steps Description
1 Power on
To provide users 2 Press the MODE button for one second, the screen Joystick curve index
with a joystick Reverse and 123456 flashes is positive,
3 Rotate right through the navigation keys appear EXP indicating that the
curve adjustment and 124 flashing middle part of the
settings, improving 4 Press the OK button to enter, a flashing digital
3D IDLE switch TH. HOLD quantization module, EXP and 2 4 stops flashing
fast at both ends of
operating handle the rocker slow
5 By rotating the navigation keys to select the channel you want to
provides three set press the OK button to enter the corresponding channel change, change for
3D / 6G The size of the channels of aileron numbers and quantization module flashing, the middle of the
rudder volume elevator direction
the other channels to hide slow pace of change
6 By rotating the navigation key right to quantify module adds value to at both ends of a
switch of positive and the left to reduce the value of the rotation, press the MODE button for
negative value.
negative curves one second the current channel quickly reset to factory defaults.
7 Press the OK button to save and jump to the next channel data Curve index setting
adjustment. 8 after setting press the BACK button twice to exit the setting. value -100- + 100
The following diagram depicts the role of exponential curve manipulation of output
Joystick exponential value
2)forward and reverse channel set Joystick swing angle Joystick swing angle Joystick swing angle
7 Press the OK button to save the settings back to the channel, and the prevent sudden rotation minimum throttle travel itinerary and five
the settings, improve 4 Press the OK button to enter , 1 and digital quantization
channel into the next set of positive and negative of the propeller helicopters general pattern is best to use a
according to injury. the feel, throttle curve module flashing, 2 3 4 5 stop flashing default value, set a value greater than
8 Press the BACK button to exit after setting
5 By rotating the navigation keys to set the corresponding preset 0, then part of the power transfer will not
adjustment 5:00 identify, value of 5 will result in reduced
position and quantization module corresponding to blink
3)The size of the rudder amount parameter settings segmentation and
output rocker is not in the highest position
6 Press the OK button to enter the appropriate location and quantification full throttle signal. 3D helicopter throttle
segmentation and 3D module flashing, represents a number of other positions hidden. curve, toggle switch to on position, five
Functional Description Setting steps Description By rotating the wheel to the right to increase the value quantization points were set,Generally 3D accelerator
accelerator throttle are set to any full throttle position is 100%
1 Standby When you select the module , rotate to the left, to quantify the value decreases. output, linear output can be provided .
Set elevator 2 Press the MODE button for one second to enter the menu, the screen channel, the numerical
curve general curve.
7 3D IDLE switch to the ON position , in order to set five point throttle Security reasons, when you set the throttle
aileron rudder Reverse and 123456 flashes.
display indicates the
curve for 3D curve, we recommend a throttle hold
current size of the switch (TH.HOLD) struck in the ON
direction three 3 Rotate right through the navigation keys appear D / R and 124 and 8 Press the OK button to save and jump to the next channel data
rudder channel position, or the blades removed to prevent
the triangular frame ( size refers to the amount of rudder Shown in box ) parameter values. 9 after setting press BACK button twice to exit the setting.
channels large flashing When the size of the
rotation of the blades suddenly hurt.
amount of small 4 Press the OK button to enter, D / R and triangular box with 24 stops rudder disposed, each
flashing box quantized values channel has four setting
amount of rudder parameters, respectively,
around the D / R switch and the
corresponding left and
joystick up and right or up and down to
switch rocker same
down to set the
5 By rotating the navigation keys to adjust the value of the amount of rudder, channel parameters.
desired value, rudder switch decide to set the size of a large rudder Amount or small When using the MODE
key long press for one
respectively, amount of rudder, shake joystick is used to select the corresponding
second to restore the
Joystick output
channel to adjust the amount attributable to the rudder Part or right,
this function is default values are
or upper part or the lower part of the left, if you set the parameters for synchronized. The size throttle curve
used to adapt the Number of dissatisfied, then press the MODE button for one second, of the rudder volume indicates
itinerary or quickly restored to factory defaults setting range -125 % to
125 %, negative values
6 Press the OK button to save and jump to the next channel parameters
mediation server indicate the opposite
7 Press BACK button twice to exit the setup
direction with the rocker
feel manipulated. swing motion direction
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
Default throttle curve Index Normal throttle curve Index 3D throttle curve Index
1/0 2/ 25% 3/ 50% 4 / 75% 5 / 100% 1/0 2/ 40% 3/ 70% 4 / 80% 5 / 100% 1/0 2/ 15% 3/ 35% 4 / 60% 5 / 100%
7 8
50
50
25
75
The thin solid line is the set value, the thick broken line and a thick solid line portion of the corresponding sensitivity value.
Thick broken line portion represents the lock lever sensitivity. Thick solid line portion represents fees lock mode sensitivity 90 °Swash plate CCPM 120 °Swash plate
9 10
② According to convert the current need to use a Phillips screwdriver to open the throttle press board, while relaxing the
current damping plate so feel lighter, reducing the damping. Then some of the channel to be used as the throttle lock
press board, separated springs, rocker relax and adjust the damping plate according to personal feel.
Flight mode selection(MODE1/MODE2)
4)Servo setting
Damping plate
5)Flight mode selection(MODE1/MODE2)
11 12
use the controller on or off, No manipulation within 20 seconds will automatically turn off the LED backlight, the user within five
1 0%
minutes without manipulating will be “DiDiDi” alarm, prompting closure controller 2 25%
Throttle curve Normal Mode 3 50%
5)controller midpoint calibration
4 75%
Functional Description Setting steps
5 100%
By handling the
joystick error occurs,
improve the feel and
1 Under the remote control off, throttle trim down while pressing the controller to open the display
1 0%
over significant
improve the
sophistication, usually 2 In will turn lift the throttle direction aileron stick hit the maximum and minimum positions respectively. 2 25%
require the initial
installation of the
joystick or potentiometer
3 50% throttle stick into neutral position.
Pitch curve Normal Mode 3 50%
after replacing the joystick. 4 Throttle trim struck down again to exit.
4 75%
6)Functional operation of the simulator
5 100%
Functional Description Setting steps Description
Aileron channel 0
Provide users with more The remote control
simulator
4 Open the simulation software for parameter settings, you can fly need to be set up in Direction channel 0
the simulator software
Aileron channel 0
Midpoint trimming Elevator Channe 0
7)Restore factory settings Throttle channel 0
Functional Description Setting steps Left 80%
When the user mixing channel A
parameter settings Shut down the remote control, press MODE + BACK button to open the remote control, the display Mixing wing OFF Right 80%
chaos, this function shows the word CC, about 5 seconds to restore normal display monitor, restore factory settings Left 80%
mixing channel B
successful. Below is restore factory settings defaults
can be quickly restored
Right 80%
to factory settings.
13 14