Beruflich Dokumente
Kultur Dokumente
AUTO-POLL
THIS IS A LICENSE AGREEMENT. THIS DOCUMENT SETS FORTH THE TERMS AND
CONDITIONS OF THE LICENSE BETWEEN YOU AND MASIBUS PROCESS
INSTRUMENTS PVT. LTD. (THE “COMPANY”). BY BREAKING THE SEAL ON THIS DISK
PACKAGE, YOU ACCEPT THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE
WITH THIS TERMS, PLEASE RETURN THIS DISK PACKAGE, UNOPENED, ALOGWITH
THE REST OF THE PACKAGE CONTENTS, IMMEDIATELY TO THE COMPANY FOR A
FULL REFUND.
Software License
• LICENSE GRANT - Company grants to you the right to use the copy of the
software program on the single computer located in India. The PROGRAM cannot
be pooled, shared among or between multiple computers through network or
other similar communication programs. Each computer is required to have its
own copy f the PROGRAM.
• COPYRIGHT – The PROGRAM is owned by the COMPANY, and is protected by
Indian Copyright laws. Therefore you must treat the PROGRAM like any other
copyright material except that you may either a) make one copy of PROGRAM
solely for backup or archival purpose, or b) copy the PROGRAM to hard disk,
provided that you keep the original solely for back-up or archival purposes. You
must reproduce and include the copyright notice on such copy. You must not
copy the written materials accompanying the PROGRAM.
• OTHER RESTRICTION – You may not sublicense, rent or lease the PROGRAM,
but you may transfer all of your interest in the PROGRAM and accompanying
written materials on a permanent basis provided that you retain no copies and
recipients agrees to the terms of this agreements in writing and copy thereof in
provided to the Company. You may not reverse engineer, recompile, or
disassemble the PROGRAM.
Table of Contents
FUNCTION
The Masibus Remote Configuration Workstation, Masibus-RCW is a
stand-alone computer program that:
FEATURES
Archives SER events at user programmable interval to the
computer Hard disk for analysis
Dial up access to device via MODEM.
Define groups for different points.
Generates Historical report in html / Excel format
Generates automatic shift and daily report in excel format
and store in hard disk. (The report period is user
programmable)
Access excel report file and html report from network
Event color for Alarm & return to normal is user configurable
User friendly GUI
Supports Multiple SER
Auto polling to multiple SER at a time
Reset SER through software
INSTALLATION
To prepare to use the Masibus-RCW, perform the following steps:
SOFTWARE INSTALLATION
NOTE: In order to effectively use the Masibus-RCW
software, a Working knowledge of IBM compatible
computers and the operating system Windows 9x is
required. It is also assumed that the operator
is familiar with the operation of SERs.
Install Masibus-RCW
Run \Masibus-RCW\setup.exe from CD to install the
software. The installation will generate a program icon in
the Start Menu/Programs and on desktop.
Make DSN
EQUIPMENT HOOKUP
There are several ways to connect to device to the computer
running
Masibus-RCW. For automatic operation, these include:
Direct connection
Via MODEM
Be sure that all SER connection is to SER ports, which have
already been configured as BPA ports running at RCW-specified
baud rate.
MODEM
Maximum speed of the MODEM should be at least as high as the
configured baud rate of the connected device. The MODEM at
the remote end of the link should be configured so that the
power on default is auto-answer mode. For safety, it should also
be configured to disable the command mode.
The MODEM connected to the computer running Masibus-RCW
should be configured with the following parameters.
GETTING STARTED
To run the program double clicks on Masibus-RCW icon on
desktop or click on Start Menu\Programs\ Masibus-RCW.
PASSWORD
The operator is prompted to enter the Masibus-RCW
password.
The default password is “masibus” until changed by operator.
If the rcw.ini file is removed the password will not work.
After a valid password is entered, the main program screen
is displayed
General
The very first time you start the Masibus-RCW you would
require to configure new SER or if you want to add another
SER in your system. When you click on New SER menu
command following wizard will be displayed to configure new
SER.
Setup
This command can be used for changing port and device
settings
of particular SER.
Exit
Masibus-RCW can be terminated by clicking on Exit command from
File Menu.
History
Auto Archive
This toggle menu command enables the auto-archiving feature.
This command enables/disables auto SER polling.
Historical Events
Masibus-RCW can keep a historical record on hard disk of all
events processed by the SERs for future analysis.
This menu command will open on-line report generation tool in
Internet Explorer.
Operator can navigate through it by just single clicking the links.
This tool can generate four types of report namely
1) System Configuration Report
2) Point Configuration Report
3) Historical Event Report
4) Group Event Report as shown in the image.
SER
The SER menu contains the commands necessary to access
Point and System configuration.
Send Configuration
System
This SER sub menu command is used for editing
the existing system configuration. Once operator
edits and applies, setting gets stored in the hard
disk. To send to SER, he/she has to send this
configuration to SER using “Send
Configuration/system” menu command.
“PORT SETTINGS”
This page allows the operator to establish port
settings for port 0 to 6
There are several parameters, which may need to
be set in this process.
BAUDRATE:
50,75,110,134.5,150,300,600,1200,1800,2400,36
00,4800,7200,9600,19200
DATA BITS: 7,8
PARITY: Odd, Even, None, Mark, or
Space
BACKUP PORTS:0-6
PREFERED PORT: Yes/No (used to prevent data
lost)
HORN: Yes/No (for CRT only)
BEEP: Yes/No (for CRT only)
TIME SORT: Yes/No (for Consoles and Printers
only)
“SCANNERS”
“SYNTHESIZED POINTS”
This page allows the operator to setup the
synthesized points. First the status of the
synthesized points are specified and then the
details of each enabled point are entered. When
the point is changed, the information for the
current synthesized point is saved and the
information for the new point is displayed.
STATUS: Enable/Disable
“ASSIGNED POINTS”
Point
Synthesized Points:
Status: Enable/Disable
Mode:(display only)
CR CRT assigned port
PA pulse on alarm
PN pulse on return to normal
PB pulse on alarm and return to normal
CA continuous on alarm
CN continuous on return to normal
Operator can click on arrow buttons
SER
Test Connection
Reset SER
View Status
Toolbar
This is the toggle menu command to display/hide toolbar from
the main screen.
Status bar
This is the toggle menu command to display/hide status bar from the
main screen.
Event View
This menu command will display only Event View screen for all
incoming events for all connected SERs.
Setup
Operator can add new group and edit the existing groups
using this menu command. These groups can be assigned to
point(s) in point configuration.
This menu command is used for changing the font, font color, font
style and size of incoming events.
CONTEXT MENU
Context Menu is displayed when operator selects an SER from the tree
and clicks the right mouse button.
TOOLBAR
Toolbar contains the following Masibus-RCW commands:
4: You also need to provide the database and log files to Masibus.
You use zip\ rar utility to compress the Logs and Backup folder.
Copy winrcw.mdb, compressed Log and Backup folder and send
it to Masibus through e-mail (as an attachment) or in CD
Contact:
MASIBUS AUTOMATION AND INSTRUMENT PVT. LTD.
B/30,GIDC, ELECTRONICS ESTATE,
SECTOR 25,GANDHINAGAR – 382 044
PHONE: (91)(079) 23287275 - 79
FAX: (079) 23287281 / 82
Web Site: www.masibus.com
Utility for assistance
1. clfind.exe
--------------
The usage is :
CLFIND [Option]
Where, Option =
/h,/? - displays the help
/F - Fix the problem (if any)
with no options - Find the COPYLOCK Dongle(s)