Beruflich Dokumente
Kultur Dokumente
www.vackerglobal.com
Few of the major advantages of the Temperature monitoring and alert system VAC-M-TV2 are listed below:
1. 4 Sensors (Temperature or Temperature plus Humidity) Thermistor, Thermocouple etc.
2. If you don’t have local network, the whole system works independently without any computer connection.
A laptop can be connected through USB cable for downloading the data as and when required.
3. If you have a local Network, you can connect to the same for remote viewing.
4. Each sensors has individual programming for sampling interval and upper and lower alert levels.
5. Each sensor can store upto 80,000 readings. This means that each sensor will store upto 270 days if the sampling
interval is 5 minutes. If the sampling interval is 10 minutes, it can record upto 540 days.
6. Free Software for data download and remote connection.
7. The reports of the recordings can be generated in Excel or as a Graph.
8. An optional alert system for Phone call and SMS alert.
9. Optional Audible alarm, Strobe or Beacon light for local alerts.
10. It works as a simple plug and play device without any complicated programming. We supply in preprogrammed
condition. Simply connect and it starts working. Specially trained technician is not required.
11. Temperature monitoring and recording is possible from -200°C to 1500°C. You have to inform the required
temperature at the time of ordering.
12. Suitable for Liquid Nitrogen Tanks at temperature of -200°C.
13. No annual software charges.
14. Can connect additional alerts such as power failure, water leakage, smoke, door opening to the alert system.
www.vackerglobal.com
During normal operation, the screen will display the current temperature and humidity readings. If you want to see
recorded data of any one of the sensors, you may simply touch on the relevant portion of the screen. Then the
readings of this particular sensors will be displayed in the full screen. You can see graph of recorded data, alerts if
any etc.
Free Software for downloading the data from the recording system
The free software is used for downloading the data from the recording
system. If there is no local network, you can download using a USB cable.
If it is connected to a computer network, you can download from a remote
computer. If you are connecting to a local network, you do not need local
download. However the data will be still available in the recording system.
The data is available as Excel and chart formats. If you are connecting to
a computer network, you can connect multiple recorders to a single
software. So if you have 4 recording devices, each of them with 4 sensors,
you will be monitoring and recording 16 different assets. If you are
connecting all of them to refrigerators, you can monitor 16 refrigerators.
You can also see all the generated alerts through the software
The above screen shows that you are seeing 4 different sensors. The first one is a combined sensor of temperature
and humidity. The other three are temperature sensors.
www.vackerglobal.com
Technical Specifications:
Display
Channels Temperature only sensors- Four Channels
Temperature/humidity sensors - Eight Channels (4 temp & 4 RH)
Pressure sensors - Four channels
1. One, two, three or four, sensors (Temp, Humidity or pressure)
3. Low backup battery icon
4. Max/Min value of each sensor
Current Conditions 5. Alarm enabled/disabled for each sensor
Displayed 6. Sensor battery icon (for wireless sensors only)
7. Date and time
8. Last time data reviewed
Display Resolution 0.1° CIF, 1.0% RH, 0.000" or hPA LCD, 0.0001 on PC
Monitoring Continuous with active display (updating every 4 seconds for wired sensors. Wireless
sensors update every 20 seconds)
www.vackerglobal.com
Sensors
Note: Wired and wireless sensors can not be mixed on the same monitor
Wireless Sensors
Thermistor sensor -30°C to 75°C (±0.3°C), ((±0.2°C option) submersible
Thermistor/Humidity -30°C to 75°C (±0.3°C)
sensor 0% to 100% RH (±3.0%) w ±0.5% Repeatability
K Thermocouple sensors -200°C to 1250°C. Accuracy ±2 2°C or ±0.75%, below 0°C ±2%
E Thermocouple sensors -200°C to 900°C. Accuracy ±1.7°C or ±0.5%, below 0°C ±1%
J Thermocouple sensors -0°C to 750°C. Accuracy ±2.2°C or ±0.75%
T Thermocouple sensor -250°C to 350°C. Accuracy ±1.0°C or ±0.75%, below 0°C ±1.5%
Wired Sensors
Digital temperature
-30°C to 80°C (±0.2°C) submersible ±0.005°C repeatability
sensor
Thermistor sensor -20°C to 75°C (±0.3°C), ±0.2°C option) submersible
(
Technical Stuff
Calibration Optional NIST traceable (1,2 or 3 points)
Characterization Three point calibration table for each sensor
Controls Easy-Touch ‘display responds to a finger touch
Data Storage
Non-volatile memory storage of 80.000 samples per sensor
Technique
Power Via USB cable or optional power adaptor (90 to 240vac)
-72 hrs. While in sleep mode. 1100mAh rechargeable lithium battery. Not
Battery Backup
user serviceable.
Output to PC 6' USB cable (Note. if USE cable is plugged into PC. power is supplied by PC)
PC Software Free site license included with text/Email alert
Indicators LCD & LED (red/green)
User Settings On board password-protected menu
LCD Pixels 488 horizontal x 270 vertical
LCD Temperature
Operating 0°C to 50°C. storage -20°C to 68°C
Range
LCD size 2.5" x 4.5"
LCD color display life 4.5 years
LED Green indicates AC power present. Red - operating on battery.
Relay Dry N/O with 2 terminal clamp <30v. Fused for .5 amp
Mounting Wall mount - Velcro.
Flush Mount 6.5" x 8" or 7.5" x 9" - four holes for molly bolts or screws
Instrument Case Mount 12" x 12" x 4" with knockout ports
Display weight 1 lb
Shipping weight -3 lbs. with power adaptor, sensors & cables
www.vackerglobal.com