Beruflich Dokumente
Kultur Dokumente
1. What mode of metal transfer allows for consistent all position GMAW welding?
a. Axial Spray b. Short Circuit
c. Spray Arc d. Globular
11. According to ASME Section IX, the following test is not mandatory for PQR
a. Visual b. All weld metal tensile
c. Transverse Tensile d. Bend
Page 1 of 2
12.Which of the following is geometrical defect :
a. Mismatch b. Laminar Tearing
c. Crater crack d. Heat affected zone crack
14.As per ISO 15614, a welder who satisfactory complete the test for the qualification of WPS:-
a. needs to weld a specific new test to be qualified b.automatically qualified in accordance with ISO
in accordance with ISO 9606-1 9606-1 with the relevant range
c.Must be previously qualified to be allowed to weld d. None of the above is correct
a test pieces for the qualification of that WPS
Page 2 of 2