Beruflich Dokumente
Kultur Dokumente
Shutdown
Previous Screen
i02331283
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
8S-2264 Puller Group 1
4B-3903 Bolt 2
A
1P-0456 Plate 1
4B-4277 Washer 2
B 9S-9152 Bearing Puller Gp 1
Start By:
A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
NOTICE
Keep all parts clean from contaminants.
Note: The water pump seal can be replaced without removing the water pump from the engine.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 53) - Document Structure Página 2 de 3
Illustration 1 g01163722
1. Remove O-ring seal (7) from adapter (1) . Remove adapter (1) from housing (4) . Remove the
O-ring seal from the outside of adapter (1) .
2. Remove bolt (11) and washer (9) . Use Tooling (A) to remove impeller (3) from shaft (10) .
3. Remove bolt (13) and washer (12) from shaft (10) . Remove gear (15) from shaft (10) .
4. Remove bolts (14) from bearing retainer (8) . Remove bearing retainer (8) . Remove bearing
cone (6) and shaft (10) from housing (4) by inverting the pump assembly.
5. Use a suitable press to remove seal (2) and oil seal (5) from the housing.
6. Use Tooling (B) and a suitable press to remove bearing assembly (6) from shaft (10) .
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 53) - Document Structure Página 3 de 3
Copyright 1993 - 2006 Caterpillar Inc. Thu Jul 20 14:33:13 CDT 2006
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006