Beruflich Dokumente
Kultur Dokumente
Inwales - Inwales are used on shallow hulls to provide additional rigidity, both longitudinally and laterally. The inwales are not attached to the
stem / stern like other stringers, but are cut just long enough to clear the ends of cross section 1 and 8 ( 1 and 6 on Sea Pup). After snapping
the inwales onto the cross sections, tape, Velcro, or HDPE clamps are used to secure the Inwales at each cross section. The inwales are made
in two equal length sections per side with 6" inserts connecting the tubes.
Note - Though the inwales snap into place the same as other stringers, they are positioned opposite the others and could recoil out of place.
Tape, Velcro, or HDPE clamps insure that they don't.