Sie sind auf Seite 1von 128

The premier source of tooling, parts,

and accessories for bench top machinists.

C A T A L O G
E I G H T E E N

www.LittleMachineShop.com
(800) 981 9663
396 W Washington Blvd #500 • Pasadena CA 91103
Email: info@LittleMachineShop.com
Welcome to LittleMachineShop.com…
…the premier source of tooling, parts, and accessories for bench top machinists.

Our products include:

Machines Tooling
CNC milling machines Boring heads
Mini lathes Clamping kits
Mini mills Collet chucks and closers
Collets (MT, R8, 5C, 3C, ER)
Accessories Drill chucks
End mill holders
Ball turning attachments Knurlers
Coolant spray units Live & dead centers
Lathe chucks Mill quick change tooling
Milling attachments Thin parallels
Quick change tool posts Vises
Rotary tables
Tool post grinders Upgrades & Conversions
Measuring Air spring conversion kits
Bed extension kits
Coaxial centering indicators Belt drive conversion kits
Dial indicators Digital position readouts
Dial test indicators Mini mill power feed kits
Electronic digital calipers Tachometers
Laser edge and center finders Tailstock cam lock kits
Machinist’s levels Tweaks & Enhancements Kits
Magnetic bases
Plus
Cutting Tools
DVDs, videos, and books
Boring bars Model kits and plans
Center drills Spare parts kits
Cut-off blades Spindle head assemblies
End mills Starter kits
Indexable tools X-Y table assemblies
Tool bits Replacement parts

We focus on tools, accessories, and replacement parts for:

• Bench top lathes sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight Tools,
Homier, Micro-Mark, ToolsNow.com (Cummins), and others
• Bench top milling machines sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight
Tools, Homier, Micro-Mark, ToolsNow.com (Cummins), and others
• Blades for 4×6 Band Saws sold by Grizzly Industrial, Harbor Freight Tools, Homier, and others

Visit our Web site at www.littlemachineshop.com to see large, full-color pictures along with more
products and more information than we can fit in this catalog.

Besides the products shown in this catalog, we have virtually every replacement part for the mini
lathes, mini mills, and micro mills sold by LittleMachineShop.com, Grizzly Industrial, Micro-Mark,
Homier, Harbor Freight, and ToolsNow.com (Cummins). Visit our Web site at
www.LittleMachineShop.com to find the parts you need.

Check our Web site at www.littlemachineshop.com for current prices. Prices are subject to change
without notice. Sale prices in this catalog are valid for a limited time only.
Contents
CNC Machines Lathe
Accessories 16 10x21 Lathe (C6) Accessories 46
CNC Milling Machines 17 4x5 Micro Lathe (C0)/Unimat 46
Software 18 Accessories
7x10/12/14 Mini Lathe (C2/C3) 47
Collets and Chucks
Accessories
3C Collets 19
7x10/12/14 Mini Lathe (C2/C3) 49
5C Collets 19
Assemblies
Brown & Sharpe Collets 20
9x20 Lathe Accessories 50
ER Collets 20
Tool Post Grinders 51
Morse Taper Collets 21
Tooling 51
R8 Collets 22
Lathe Chucks
Taig Collets 22 Accessories 53
Coolant Systems Adapters 53
Flood Systems 22
Chucks 54
Mist Systems 23
Machines
Cutting Tools Mini Lathes 56
Boring Bars 24
Mini Mills 56
Cut-Off Tools 24
Mill
Drill Sets 24 Micro Mill (X1) Accessories 56
Drills 25 Mini Mill (X2) Accessories 56
End Mills 26 Mini Mill (X2) Assemblies 57
Engraving Tools 27 Quick Change Tooling 58
Indexable Inserts 27 Sherline/Taig Mill Accessories 60
Reamers 28 Small Mill (X3) Assemblies 61
Rotary Broaches 29 Small Mill (X3/SX3) Accessories 61
Saw Blades 30 Tooling 61
Screw Extractors 31 Models
Taps & Dies 31 Flywheels 64
Threading 33 Fully Assembled & Kits 64
Turning Tools 33 Precision
DROs Calipers 65
Displays 36 Edge and Center Finders 68
DRO Packages 36 Layout 71
Scales 37 Measuring 76
Kits Sets 88
Conversion Kits 37 Setup 89
Spare Parts Kits 41 Project Plans
Starter Kits 42 Boats 91
Conversions 92
Engines 92
Tools 93
QC Tool Posts
QCTP Sets 94
Rotary Tables
Rotary Tables 97
Tooling
Arbors and Sleeves 99
Clamping Kits 100
Drill Chucks 102
Tools & Things
Abrasives 103
Apparel 104
Coolants & Lubricants 104
Gift Certificates 105
Lights 105
Things 106
Threading Tools 106
Tools 108
X-Y Tables 111
Videos & Books
Books 112
Videos 112
Vises
Accessories 120
Milling Vises 120
Other Vises 121
Screwless Vises 122
3501 and 3503 CNC Milling Machines
The LittleMachineShop.com models 3501
and 3503 CNC Milling Machines provide a
complete CNC solution. They are not
conversions or adaptations; these
machines are designed and built by the
factory as CNC machines.

Until now, hobby CNC has required that


you make or buy a conversion of a manual
milling machine. You had to integrate the
mill, ball screws, stepper motors, drivers,
power supplies, and breakout boards. Most
people don’t even know what those things
are, much less how to integrate them into
a working CNC machine.

The LittleMachineShop.com CNC milling


machines are perfect for the bench top
machinist who wants to create parts and
not just build a CNC machine. The power
supplies and controllers are built into the
mill. No extra cabinets, cables, or
connectors are required. Add the optional
model 3789 computer and you have a
complete CAD/CAM/CNC package with
fully-licensed software. The CNC milling
machines even include a 4th axis driver so Limited-time offer: Mach 3 license
you can add a 4th axis rotary table by included with machine purchase
simply plugging it in.

With a work envelope of 10.2" (X-axis) × 4.3" (Y) × 7.1" (Z) the model 3501 has large capabilities in a
small machine. And at 190 pounds, you know it is not a toy. The mill table is 15" × 5.38", giving you
plenty of room to mount your work and fixtures. A 2/3 horsepower closed loop brushless DC spindle
motor and synchronized belt drive takes the spindle from 100 to 7000 RPM under full CNC control.

The model 3503 has a work envelope of 11.2" (X-axis) × 4.7" (Y-axis) × 10.6" (Z-axis), and weighs 443
pounds. The mill table is 21.50" × 6.30". A 1.3 horsepower closed loop brushless DC spindle motor and
synchronized belt drive takes the spindle from 100 to 5000 RPM under full CNC control. That’s enough
power for a face mill up to 2.5 inches in diameter.

x Class 5 precision hardened and ground ball screws


x Direct drive NEMA 34 hybrid stepper motors
x Zero backlash jaw couplings
x Three stepper drivers for X,Y, and Z axes
x Extra stepper driver for 4th axis pre-wired with external socket
x Variable spindle speed under full CNC control
x Synchronous belt spindle drive (no gears)
x Limit switches and homing on all three axes
x Parallel interface board optically isolates the machine from the
computer
x Fully covered ways and ball screws
x Emergency e-stop switch and chuck guard switch
x CE marking (comparable to UL listing)
x CNC controlled coolant pump receptacle
Specifications Model 3501 Model 3503

End Milling Capacity 0.4" (10 mm) 0.6" (16 mm)


Face Milling Capacity 0.8" (20 mm) 2.5" (63 mm)
Drilling Capacity 0.4" (10 mm) 0.6" (16 mm)
Table Size 15" × 5.38" (384 mm × 137 mm) 21.50" × 6.30" (548 mm × 160 mm)
X- Axis Travel 10.2" (260 mm) 11.2" (285 mm)
Y-Axis Travel 4.3" (110 mm) 4.7" (120 mm)
Z-Axis Travel 7.1" (180 mm) 10.6" (270 mm)
Throat 5.1" (130 mm) 7.9" (200 mm)
X-axis & Y-axis motors NEMA 23 12 lb-in (1.35 Nm) torque NEMA 34 35 lb-in (4 Nm) torque
Z-axis motor NEMA 23 19.5 lb-in (2.2 Nm) torque NEMA 34 53 lb-in (6 Nm) torque
Positioning Accuracy 0.0005" (0.01 mm) 0.0005" (0.01 mm)
Spindle Taper 2 Morse taper R8
Spindle Motor 0.67 hp (500 W) brushless DC 1.3 hp (1 kW) brushless DC
Spindle Speed 100–7000 RPM 100–5000 RPM
Power Requirements 120 V 60 Hz 6.3 Amps 120 V 60 Hz 15 Amps
Machine Weight 190 lb (86.4 kg) 443 lb (201 kg)
Overall Dimensions 24.8" × 24.8" × 24.8" 33.8" × 34.4" × 34.0"
(W × D × H) (630 mm × 630 mm × 630 mm) (855 mm × 875 mm × 960 mm)
Shipping Weight 264 lb (120 kg) 573 lb (260 kg)
Shipping Dimensions 29.5" × 30.0" ×31.5" 40" × 39.5" × 44"
(W × D × H) (745 mm × 760 mm × 800 mm) (1020 mm × 1000 mm × 1120 mm)
Price $3,495.00 $5,495.00

3789 Pentium 4 Computer


The model 3789 Pentium 4 Computer includes the computer, a 17" flat
screen monitor, plus keyboard and mouse. It comes with a fully licensed
copy of Dolphin CAD/CAM. $895.00

3532 Machine Stand


This stand is custom made for the model 3503. It includes coolant drain
and supply fittings so you can install a coolant pump in the cabinet. The
cabinet includes adjustable leveling feet. $295.00

3519 4th Axis Rotary Table


The 4th axis rotary table plugs right into the model 3503 CNC Milling
Machine, which includes the 4th axis driver. The rotary table is 4" in
diameter, has a rotational accuracy of 5 seconds and backlash less than
0.002" (0.05 mm) adjustable to less than 0.0005" (0.01 mm) $750.00
4100 HiTorque 7x12 Mini Lathe
The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most
torque, and a longer center distance than competitors’ lathes.

The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the
speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.

The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is equipped
with a 4-way indexing tool post set for 5/15" (8 mm) tools.

Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.
You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per
inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with
the extra 21 tooth change gear that is included.

x Includes Mini Lathe Users Guide written


by Chris Wood Specifications

x 500 Watt output spindle motor Swing Over Bed 7" (180 mm)
x No gears in spindle drive Swing Over Saddle 4.3" (110 mm)
x E-stop safety power switch Distance Between 12.2" (310 mm)
Centers
x Extended threading capability - inch and
Spindle Through Hole 0.8" (20 mm)
metric threads
Spindle Motor Output 0.7 hp (500
x Rear apron shield to keep swarf out of the Watts)
mechanism
Range of Threads 4-80 TPI (0.3-8
x Cam lock tailstock mm)
x Four-way tool post Spindle Taper #3 Morse taper

x Zero-resettable dials graduated in inches Tailstock Taper #2 Morse taper


and mm Spindle Speed 50 - 2500 RPM
x Reversible lead screw for right and left Power Requirements 120 V 60 Hz 8
Amps
hand threads
3900 HiTorque Mini Mill
The LittleMachineShop.com HiTorque Mini Mill is the
best in its class. It has the most power, most
torque, and a larger table than competitors’
mills.

The 500 Watt brushless spindle drive


motor provides tremendous low-end
torque. And you can vary the speed from 50 RPM
to 2500 RPM continuously. There are no gears to
shift. And, with no gears, the HiTorque Mini Mill
is the quietest in its class.

The large mill table provides 50% more table area


than other mini mills. It also has 30% more travel in
each direction. The resettable feed dials allow you to
zero them at any point.

The HiTorque Mini Mill has drill press handles for drilling
and fast motion of the mill's head. It also has Z-axis fine
feed with 0.001" resolution for milling operations.

x 500 Watt output spindle motor


x Large X-Y table
x R8 Spindle for wide tool
availability
x Column tilts 45° either side of vertical
x Dovetail column maintains head alignment at
any height
x Fine feed on Z-axis for precise control
x Three radial handles for drilling
Specifications
x E-stop safety power switch
x Adjustable Z-axis stop for repetitive End Milling Capacity 0.6" (16 mm)
drilling Face Milling Capacity 1.2" (30 mm)
x Neoprene bellows protect horizontal ways Drilling Capacity 0.5" (13 mm)
Table Size 18.1" x 4.7"
x Adjustable gibs on all dovetail ways
(460 mm x 120 mm)
T-slots 3 slots 0.47" (12.0
mm) wide
X-Axis Travel 11.8" (300 mm)
Y-Axis Travel 5.1" (130 mm)
Z-Axis Travel 9.3" (235 mm)
Throat 6.5" (165 mm)
X- and Y-Axis Feed 0.062" (1.59 mm) per
Screws rotation
Head Tilt 45°- 0° - 45°
Positioning Accuracy 0.0004" (0.010 mm)
Spindle Taper R8
Spindle Motor 0.67 hp (500 Watts)
Spindle Speed 100 - 2500 RPM
Power Requirements 120 V 60 Hz 8 Amps
New Products in this Catalog
Part no. Product Price Page
3890 Abrasive Cloth, 1" Wide 240 Grit $0.50 103
3891 Abrasive Cloth, 1" Wide 320 Grit $0.50 103
3892 Abrasive Cloth, 1" Wide 400 Grit $0.50 103
3893 Abrasive Cloth, 1" Wide 600 Grit $0.50 103
3886 Abrasive Sheet, Wet or Dry 240 Grit $0.49 103
3887 Abrasive Sheet, Wet or Dry 320 Grit $0.49 103
3888 Abrasive Sheet, Wet or Dry 400 Grit $0.49 103
3889 Abrasive Sheet, Wet or Dry 600 Grit $0.49 103
3832 Boring Bar Set, Carbide 3/4" Shank $39.95 24
3808 Clamps, Adjustable 1.7" x 0.65" $27.95 101
3809 Clamps, Adjustable 2.3" x 0.65" $28.95 101
3802 Clamps, Adjustable 3.7" x 0.8" $31.95 101
3805 Clamps, Adjustable 4.1" x 1.2" $19.95 101
3806 Clamps, Adjustable 5.5" x 1.2" $21.95 101
3842 Collets, 5C Set of 17 $74.95 63
3864 Cut-Off Tool Holder and HSS Blade $39.90 47
3929 Digital Position Readout, 2-Axis DRO Pros $599.00 37
3811 Digital Position Readout, 3-Axis DRO Pros $799.00 37
3816 Dongle, Dolphin Partmaster PRO $150.00 18
3884 Drive Pin Punches, Extra Long, Starrett $37.50 109
3820 DVD: Building a Vertical Boiler $29.95 114
3793 Edge and Center Finder, Metric, Starrett $24.50 70
3799 Halogen Bulb $9.95 105
3865 Hat, Big Gator Tools $9.95 108
4100 HiTorque 7x12 Mini Lathe $639.95 56
3900 HiTorque Mini Mill $649.95 56
3867 Machine Shop Know-How $49.95 112
3879 Pin Gage Set, 0.011" to 0.060" Minus $29.95 84
3881 Pin Vise, 0.010" - 0.055" (0.25 - 1.4mm) Starrett $18.00 110
3882 Pin Vise, 0.025 - 0.075” (0.64 - 1.9mm) Starrett $21.50 110
3883 Pin Vise, 0.045 - 0.135” (1.2 - 3.4mm) Starrett $23.50 110
3825 QC Turning Tool holder, A2Z CNC, Pack of 4 $65.00 94
3772 Rotary Broach Tool Holder 2MT $79.95 29
3903 Rotary Broach Tool Holder R8 $99.95 29
3922 Rotary Broach, 1/4" Hex $29.95 29
3917 Rotary Broach, 1/4" Square $29.95 29
3920 Rotary Broach, 1/8" Hex $29.95 29
3915 Rotary Broach, 1/8" Square $29.95 29
3904 Rotary Broach, 3 mm Hex $29.95 29
3909 Rotary Broach, 3 mm Square $29.95 29
3921 Rotary Broach, 3/16" Hex $29.95 29
3916 Rotary Broach, 3/16" Square $29.95 29
3924 Rotary Broach, 3/8" Hex $29.95 29
3919 Rotary Broach, 3/8" Square $29.95 29
3773 Rotary Broach, 4 mm Hex $29.95 29
3910 Rotary Broach, 4 mm Square $29.95 29
3905 Rotary Broach, 5 mm Hex $29.95 29
Part no. Product Price Page
3911 Rotary Broach, 5 mm Square $29.95 29
3923 Rotary Broach, 5/16" Hex $29.95 29
3918 Rotary Broach, 5/16" Square $29.95 29
3926 Rotary Broach, 5/32" Hex $29.95 29
3906 Rotary Broach, 6 mm Hex $29.95 29
3912 Rotary Broach, 6 mm Square $29.95 29
3907 Rotary Broach, 7 mm Hex $29.95 29
3913 Rotary Broach, 7 mm Square $29.95 29
3927 Rotary Broach, 7/32" Hex $29.95 29
3908 Rotary Broach, 8 mm Hex $29.95 29
3914 Rotary Broach, 8 mm Square $29.95 29
3925 Rotary Broach, 9/64" Hex $29.95 29
3855 Safety Glasses $2.95 106
3885 Scriber withTwo Tips, Starrett $23.50 74
3896 SpillMaster container $4.95 106
3804 Spra-Kool Midget Mist Coolant Spray Unit & Coolant $34.90 23
3803 Studs, 10-32 with Spherical Nuts & Washers $9.95 101
3901 Tap & Tap Drill Bit, M8x1.25 Metric Thread $8.95 19
3878 Tilting Table, 7" x 5" $129.95 64
3869 Tooling Package, 3501 CNC Mill $229.95 43
3857 Vise, 4" CNC Mill $179.95 120
3899 Vise, 4" Cross-Sliding $54.95 121
3866 V-TapGuide Hand Tap Guide Set, Inch, Metric & Free Hat $39.90 108
Supercharge Your Mini Lathe

Trick out your mini lathe with accessories from LittleMachineShop.com.


Part no. Product Price Page
2258 Air Spring Conversion Kit $39.95 37
2568 Ball and Radius Turning Tool, Large, OMW $139.95 51
2569 Ball and Radius Turning Tool, Small, OMW $89.95 51
1970 Ball Turning Attachment $47.95 51
1928 Bed Extension Kit 14" $149.95 38
2977 Carriage Lock, Mini Lathe $35.95 47
2705 Carriage Stop, Adjustable $24.95 47
2222 Digital Position Readout, 2-Axis Mini Lathe $149.95 36
2419 Follower Rest, Ball Bearing $54.95 48
1198 Follower Rest, Mini Lathe $26.95 48
1911 Knurler, Large Capacity $39.95 52
2909 Metal Gear Kit for Mini Lathe & Mini Mill $71.60 39
3446 Metal Gear Kit, Mini Lathe Complete $195.95 39
1681 Milling Attachment, Mini Lathe $154.95 48
1956 Milling Attachment, Taig $62.95 49
2383 Mini Lathe 20 TPI Feed Screw Parts $54.95 39
1815 Motor Controller Upgrade Kit $144.95 40
1817 Motor Controller Upgrade Kit, Harbor Freight Rocker Switch $164.95 40
2592 Power Switch Upgrade Kit $4.95 40
2461 Quick Change Tool Post Set by A2Z CNC $99.95 94
3444 Quick Change Tool Post Set, Hobby $109.95 96
1672 Quick Change Tool Post Set, Micro $224.95 96
3112 Quick Change Tool Post Set, Tormach 0XA $129.95 97
2935 Rotary Tool Mount $24.95 49
2418 Steady Rest, Ball Bearing $66.95 49
1197 Steady Rest, Mini Lathe $29.95 49
1684 Tachometer, Spindle $77.95 49
2658 Tachulator Tachometer & SFM Meter $99.95 53
2018 Tailstock Cam Lock Kit $29.95 41
1877 Tailstock Turret Tool Holder, 2MT $69.95 53
1275 Tool Post Grinder $239.95 51
2001 Tool Post Grinder $114.95 51
2634 Tweaks & Enhancements Kit™, Mini Lathe $19.95 41
Value Packs

Value packs offer tremendous savings over buying individual items. Get everything you need to
get started using your benchtop lathe or milling machine.
Starter Kits get you some basics to help get you going.
Tooling Packages provide everything you need to start making chips with your lathe or milling
machine.
Part no. Product Price Page
1259 Measurement Starter Kit with Dial Caliper $29.95 89
1260 Measurement Starter Kit with Digital Caliper $39.95 89
3766 Milling Attachment Package, Mini Lathe $179.95 48
1931 Rotary Table, 4" with Tailstock & Dividing Plate $349.95 97
2183 Rotary Table, 4" with Tailstock & Dividing Plate $239.95 98
3131 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe $299.95 98
Chuck
3791 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe $429.95 97
Chuck
3792 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe $414.95 97
Chuck
3132 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe $289.95 98
Chuck
2329 Rotary Table, 6" with Tailstock & Dividing Plate $399.95 99
1796 Starter Kit, Lathe (3/8" Tool Bits) $25.95 42
2653 Starter Kit, Micro Mill $78.95 42
1261 Starter Kit, Mini Lathe (5/16" Tool Bits) $22.95 42
1262 Starter Kit, Mini Mill $79.95 42
3491 Tooling Package, 2MT Micro Mill $229.95 43
3869 Tooling Package, 3501 CNC Mill $229.95 43
3490 Tooling Package, 3MT Mini Mill $299.95 44
3534 Tooling Package, 8x12, 8x14 Lathe $159.95 44
3786 Tooling Package, 9x20 Lathe $224.95 45
3514 Tooling Package, Atlas/Craftsman 6" Lathe $159.95 44
3486 Tooling Package, Mini Lathe $159.95 44
3489 Tooling Package, R8 Mini Mill $273.95 44
3527 Tooling Package, Small Lathe $219.95 45
3526 Tooling Package, X3 Mill $299.95 45
Rotary Tables

We carry a full range of small rotary tables. Dividing plate sets are available for all of our rotary tables
if you want to do indexing. We also have tailstocks for all the rotary tables.

1810 Rotary Table, 4″ Precision $169.95


2183 Rotary Table, 4″ with Tailstock & Dividing Plate $239.95
3131 Rotary Table, 4″ w/Tailstock, Dividing Plate, 3-Jaw Chuck $299.95
3132 Rotary Table, 4″ w/Tailstock, Dividing Plate, 4-Jaw Chuck $289.95
1927 Rotary Table, 4″ H/V $249.95
3791 Rotary Table, 4″ w/Tailstock, Dividing Plate, 3-Jaw Chuck $429.95
3792 Rotary Table, 4″ w/Tailstock, Dividing Plate, 4-Jaw Chuck $414.95
1727 Rotary Table, 4" Phase II $279.95
1931 Rotary Table, 4″ with Tailstock & Dividing Plate $349.95
2326 Rotary Table, 6″ Precision $249.95
2329 Rotary Table, 6″ with Tailstock & Dividing Plate $399.95
1787 Rotary Table, 6″ Phase II $295.95

See details about rotary tables beginning on page 97 and on page 124.
A2Z CNC Quick Change Tool Post Sets

This Quick Change Tool Post set works with many small lathes.

x Made from 6061 T6 Aluminum


x Hard Anodized for durability and appearance
x No tools required to change tools
x Additional tool holders available

The tool post set includes 2 turning holders, a boring bar holder, and a cut-off tool holder. The turning
tool holders accept tools up to 3/8" square. The boring bar holder takes boring bars with a 3/8" round
shank. The cut-off tool holder uses 1/2" tall cut-off blades.

Mounting kits are available for 7×10, 7×12, and 7×14 mini lathes, Sherline, Taig, Prazi, Emco, Unimat,
and Atlas 6" lathes. A2Z CNC tool holders fit TS Engineering and Phase II Hobby tool posts.

2461 7×10, 7×12, and 7×14 $99.95


2486 Atlas/Craftsman 6" $99.95
2488 Prazi and Emco $99.95
2477 Sherline $99.95
2478 Taig $99.95
2487 Unimat 3 & 4, SIEG C0 $99.95
2271 9×20 $99.95
2713 8×12 and 8×14 $99.95
3474 SIEG C4 $99.95

2484 3/8" Boring Tool Holder $18.75


2587 1/2" Boring Tool Holder $20.50
2485 Cut-Off Tool Holder $20.50
2483 Turning Tool Holder $16.25
3445 Blank Tool Holder $12.75

See the complete line of quick change tool post sets on pages 94–97.
CNC Machines: Accessories
3519 4th Axis Rotary Table for CNC $750.00
Ƚ Includes stepper motor
Ƚ Includes tailstock
Ƚ Includes adapter to mount a 3" lathe chuck
Ƚ Includes hold down clamps to mount the rotary table on 350 and 3503 CNC Mills.
The 4th axis rotary table plugs right into the model 350 and 3503 CNC Milling Machine, which
includes the 4th axis driver.
Diameter - 4"
Capacity - 5 kg
Maximum Torque with .35 N/m motor - 54 N/m
Thru Hole - 2mm
Horizontal - Yes
Vertical - Yes
Vertical Center Height - 2.68"
Ratio - 40 to 
Net Weight - 2kgs
Rotational Accuracy - 5 seconds
Backlash - Less than 0.05 mm, and within 0.0 mm after adjustment
Repeatability - 0.0 mm
T-Slot Size - 8mm
3429 4th Axis Rotary Table for CNC, No Stepper Motor $600.00

3616 Computer, Pentium 4 with Software Package $995.00


The model 366 Pentium 4 Computer includes the computer, a 7" flat screen monitor, plus
keyboard and mouse. It comes with fully licensed copies of Mach3 and Dolphin CAD/CAM. The
software licenses alone are worth more than the total cost of the computer.
This computer includes a parallel port on the motherboard, and is guaranteed to work with the
LittleMachineShop.com CNC milling machines.
Mach3 converts a standard PC into a fully featured, 6-axis CNC controller.
Dolphin PartMaster CAD/CAM creates complete programs for CNC milling machines and machining
centers. PartMaster is completely icon driven so that no programming language needs to be
learned.
3657 Computer, Pentium 4 $595.00
3789 Computer, Pentium 4 with Dolphin CAD/CAM Software $895.00

3414 Jog Dial for CNC Machines $89.95


Ƚ The ideal MACH3 configurable accessory
Ƚ USB Interface
Ƚ Setup software included
Ƚ Complete jog pendent
The Z-Bot Jog Dial II replaces the hand cranks on CNC mills.
The Z-Bot Jog Dial II is a USB jog pendent controller developed to work in conjunction with the
popular Mach3 CNC control software. It is supplied with an installation disc that contains a Mach3
custom plug-in. The Jog Dial II is highly flexible, easy to use, requires minimal configuration, and
does not use any parallel port pins.
The Jog Dial II USB controller has an inner and outer dial. Used for rapid coarse positioning, the
outer dial will jog progressively faster, up to the full jog speed configured in Mach 3, as the dial is
turned further to the right or left of the center detent. The outer dial springs back to center
position when released. Used for fine positioning, the inner dial jogs the machine one step
increment, as configured in Mach3 for each "click." Four buttons are used to select the axis to jog.
The fifth button is easily configured for a variety of Mach3 functions using the plug-in supplied.

3532 Stand, 3503 CNC Mill $295.00


Ƚ Stand for model 3503 CNC Milling Machine
This stand is custom made for the model 3503 CNC Milling Machine. It includes coolant drain and
supply fittings so you can install a coolant pump in the cabinet. The cabinet includes adjustable
leveling feet.

(800) 981 9663 LittleMachineShop.com Page 16


CNC Machines: CNC Milling Machines
CNC Machines: CNC Milling Machines
3501 Milling Machine CNC $3,495.00
Ƚ Complete factory-built CNC milling machine
Ƚ 2/3 Horsepower spindle motor drives 2 Morse taper spindle
Ƚ Electronics are built in to the machine
Ƚ Fourth axis driver included at no extra charge
Ƚ Includes fully-licensed copy of Mach 3 software
The LittleMachineShop.com model 350 CNC Milling Machine is a complete CNC solution. It’s not a
conversion or adaptation; this machine is designed and built by the factory as a CNC machine.
Up until now, hobby CNC has required that you make or buy a conversion of a manual milling
machine. You had to integrate the mill, ball screws, stepper motors, drivers, power supplies, and
breakout boards. Most people don’t even know what those things are, much less how to integrate
them into a working CNC machine.
The LittleMachineShop.com model 350 is the perfect mill for the bench top machinist who wants
to create parts and not just build a CNC machine. The power supplies and controllers are built into
the mill. No extra cabinets, cables, or connectors are required. Add the optional model 366
computer and you have a complete CAD/CAM/CNC package with fully-licensed software. The
model 350 CNC milling machine even includes a 4th axis driver so you can add a 4th axis rotary
table by simply plugging it in.
With powerful NEMA 23 hybrid stepper motors connected by zero backlash jaw couplings to
precision-ground ball screws, the model 350 can achieve positioning accuracy to 0.0005". Not
many hobby-grade machines can make a claim like that. It will machine at up to 20 inches per
minute and rapid traverse at up to 80 inches per minute.
A 2/3 horsepower closed loop brushless DC spindle motor and synchronized belt drive takes the
spindle from 00 to 7000 RPM under full CNC control.
With a work envelope of 0.2" (X-axis) × 4.3" (Y-axis) × 7." (Z-axis) the model 350 has large
capabilities in a small machine. And at 90 pounds, you know it is not a toy. The mill table is 5" ×
5.38", giving you plenty of room to mount your work and fixtures.
The coolant catch tray on the table and the pan under the machine make the use of flood coolant
practical. A software controlled receptacle on the back of the machine provides CNC control of the
optional coolant pump.
And we haven’t forgotten your safety. The model 350 carries the CE marking, the European
counterpart to UL listing. A safety E-stop button right on the front and the interlocked spindle
shield shut down the mill instantly.
The LittleMachineShop.com model 350 CNC Milling Machine is a version of the SIEG KX.

(800) 981 9663 LittleMachineShop.com Page 17


CNC Machines: CNC Milling Machines
3503 Milling Machine CNC $5,495.00
Ƚ Complete factory-built CNC milling machine
Ƚ -/3 Horsepower spindle motor drives R8 spindle
Ƚ Electronics are built in to the machine
Ƚ Fourth axis driver included at no extra charge
Ƚ Includes fully-licensed copy of Mach 3 software
The LittleMachineShop.com model 3503 CNC Milling Machine is a complete CNC solution. It’s not a
conversion or adaptation; this machine is designed and built by the factory as a CNC machine.
Up until now, hobby CNC has required that you make or buy a conversion of a manual milling
machine. You had to integrate the mill, ball screws, stepper motors, drivers, power supplies, and
breakout boards. Most people don’t even know what those things are, much less how to integrate
them into a working CNC machine.
The LittleMachineShop.com model 3503 is the perfect mill for the bench top machinist who wants
to create parts and not just build a CNC machine. The power supplies and controllers are built into
the mill. No extra cabinets, cables, or connectors are required. Add the optional model 366
computer and you have a complete CAD/CAM/CNC package with fully-licensed software. The
model 3503 CNC milling machine even includes a 4th axis driver so you can add a 4th axis rotary
table by simply plugging it in.
With powerful NEMA 34 hybrid stepper motors connected by zero backlash jaw couplings to
precision-ground ball screws, the model 3503 can achieve positioning accuracy to 0.0005". Not
many hobby-grade machines can make a claim like that. It will machine at up to 20 inches per
minute and rapid traverse at up to 80 inches per minute.
The model 3503 offers industrial-grade features such as rigid way covers on the horizontal axis. All
of the dovetail ways and ball screws are completely covered. A one-shot oiler with flexible
shielded lube distribution tubing takes care of daily lubrication with a single press of a lever.
A .3 horsepower closed loop brushless DC spindle motor and synchronized belt drive takes the
spindle from 00 to 5000 RPM under full CNC control. That’s enough power for a face mill up to 2.5
inches in diameter.
With a work envelope of .2" (X-axis) × 4.7" (Y-axis) × 0.6" (Z-axis) the model 3503 has the
capabilities to do real work. And at 443 pounds, you know it is not a toy. The mill table is 2.50" ×
6.30", giving you plenty of room to mount your work and fixtures.
The coolant catch tray on the table and the pan under the machine make the use of flood coolant
practical. A software controlled receptacle on the back of the machine provides CNC control of the
optional coolant pump.
And we haven’t forgotten your safety. The model 3503 carries the CE marking, the European
counterpart to UL listing. A safety E-stop button right on the front and the interlocked spindle
shield shut down the mill instantly.
The LittleMachineShop.com model 3503 CNC Milling Machine is a version of the SIEG KX3.
3532 Stand, 3503 CNC Mill $295.00

CNC Machines: Software


3655 CAD/CAM Software, Dolphin Partmaster PRO Hobby License $395.00
Ƚ Professional grade software at hobby-afordable price
Ƚ Create and machine 2D & 2.5D geometry
Ƚ CAD software crates drawings
Ƚ CAM software creates G-code
Partmaster Pro Milling is a fully functional machining module that creates and machine 2D & 2.5D
geometry. It's complete 2 axis & 3 axis and also allows some 4 axis machining. Upgraded engraving
features are also included. You may also import dxf files and create the toolpath directly.
With Dolphin CAD/CAM, everyone from the hobbyist that works in their garage or borrows their
employers machine to the huge corporations that have multiple machining centers can take
advantage of this advanced technology at a reasonable cost. With the Ease of Use and Fast
Learning Curve, you will find it easy to start cutting your parts. Dolphin CAD/CAM USA offers this
CAD/CAM software technology for Mills, Lathes, Routers, Wire EDM, Lasers, Plasmas, Waterjets,
and many more machines that are used in the industry today.
This is a license for hobby use only. For a commercial license, see our PN 383.
3816 Dongle, Dolphin Partmaster PRO $150.00

(800) 981 9663 LittleMachineShop.com Page 18


CNC Machines: Software
3652 Mach 3 CNC Software License $175.00
Ƚ Converts a standard PC to a fully featured, 6-axis CNC controller
Ƚ Allows direct import of DXF, BMP, JPG, and HPGL files through LazyCam
Ƚ Visual Gcode display
Ƚ Generates Gcode via LazyCam and Wizards
Ƚ Fully customizable interface
This product is a license to use any version of Mach software. You must download the Mach 3
software from www.machsupport.com. This ensures that you have the most recent version of Mach
3.
You will receive a license file on a USB flash drive.
Support for Mach 3 is provided on www.machsupport.com. There you will find forums, tutorials,
documentation, and such. There is no telephone support available.

Collets and Chucks: 3C Collets


2244 Collet Closer, 7x10, 7x12 $99.95
3C collet closer for 7x0 and 7x2 lathes.
This set includes a 3 Morse taper to 3C collet adapter and a drawtube assembly.
The adapter is precision ground to minimize runout.

2240 Collet Adapter, 3MT to 3C $59.95


2374 Collet Closer, 7x14 $99.95
2728 Collet Closer, Universal $99.95

1991 Collets, 3C Set of 7 $69.95


Ƚ Set of seven 3C round collets range in size from /8" to /2" by 6ths
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6" and /2"
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance
The thru bore of the collets is 0.467". The /2" collet is bored to /2" by 0.66" deep. All the other
collets will pass the full material size through the length of the collet.

Collets and Chucks: 5C Collets


3190 Collet Block Set, Hex and Square $43.95
Ƚ Holds standard 5C collets
Ƚ Economical indexing for 2, 3, 4, and 6 divisions
Ƚ Easy cross drilling at 60°, 90° and 20°
Ƚ Made of hardened tool steel
Ƚ Ground square and parallel within 0.0005" all over
This set includes five pieces, the square block, the hexagonal block, two quick acting rings and the
lever operated collet closer.

3047 Collet Chuck for 5C Collets $199.95


Ƚ Plain back collet chuck mounts like a lathe chuck
Ƚ 5" (30 mm) diameter
Ƚ /6" to  /8" capacity with appropriate collets
Ƚ Through hole is .23"
This 5C collet chuck mounts with three holes for M8 cap screws. They are through drilled and
counterbored for bolting on from the front. The registration inset is 95 mm in diameter.
3901 Tap & Tap Drill Bit, M8x1.25 Metric Thread $8.95

3619 Collet Stop, 5C with Tips $9.95


Ƚ Includes 5C collet stop, 2 spring ejector tips, and 2 static tips
Ƚ Tips are under /4" and under 5/8" diameter
Ƚ Speed up repetitive work

(800) 981 9663 LittleMachineShop.com Page 19


Collets and Chucks: 5C Collets
1708 Collets, 5C Set of 6 $29.95
Ƚ Set of six 5C round collets range in size from /8" to 3/4" by 8ths
Ƚ Includes /8", /4", 3/8", /2", 5/8" and 3/4"
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance
Ƚ Internally threaded for a work stop

3482 Collet, 1" 5C $6.95


3478 Collet, 1/2" 5C $6.95
3476 Collet, 1/4" 5C $6.95
3670 Collet, 3/16" 5C $6.95
3480 Collet, 3/4" 5C $6.95
3477 Collet, 3/8" 5C $6.95
3479 Collet, 5/8" 5C $6.95
3481 Collet, 7/8" 5C $6.95
3842 Collets, 5C Set of 17 $74.95

Collets and Chucks: Brown & Sharpe Collets


2999 Collets, 7BS Set of 7 $69.95
Ƚ Set of seven Brown & Sharpe 7 round collets
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", and /2"
Ƚ 3/8"-6 drawbar thread
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance
2998 Collet, 1/2" 7BS $10.95
2994 Collet, 1/4" 7BS $10.95
2992 Collet, 1/8" 7BS $10.95
2993 Collet, 3/16" 7BS $10.95
2996 Collet, 3/8" 7BS $10.95
2995 Collet, 5/16" 7BS $10.95
2997 Collet, 7/16" 7BS $10.95

3011 Collets, 9BS Set of 11 $139.95


Ƚ Set of eleven Brown & Sharpe 9 round collets
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", /2", 9/6", 5/8", /6", and 3/4"
Ƚ /2"-3 drawbar thread
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance
3006 Collet, 1/2" 9BS $13.95
3002 Collet, 1/4" 9BS $13.95
3000 Collet, 1/8" 9BS $13.95
3009 Collet, 11/16" 9BS $13.95
3001 Collet, 3/16" 9BS $13.95
3010 Collet, 3/4" 9BS $13.95
3004 Collet, 3/8" 9BS $13.95
3003 Collet, 5/16" 9BS $13.95
3008 Collet, 5/8" 9BS $13.95
3005 Collet, 7/16" 9BS $13.95
3007 Collet, 9/16" 9BS $13.95

Collets and Chucks: ER Collets


2229 Collet & Chuck Set, 2MT, ER-25 $139.95
Ƚ Includes nine ER-25 Collets
Ƚ 2 Morse taper shank
Ƚ 3/8"-6 drawbar thread
Ƚ Includes spanner wrench and fitted case
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", /2", 9/6", and 5/8"
2230 Collet Chuck, 2MT, ER-25 $62.95

(800) 981 9663 LittleMachineShop.com Page 20


Collets and Chucks: ER Collets
2228 Collet & Chuck Set, 3MT, ER-32 $159.95
Ƚ Includes eleven ER-32 collets
Ƚ 3 Morse taper shank
Ƚ 3/8"-6 drawbar thread
Ƚ Includes spanner wrench and fitted case
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", /2", 9/6", 5/8", /6", and 3/4"
2231 Collet Chuck, 3MT, ER-32 $69.95

2888 Collet & Chuck Set, R8, ER-32 $169.95


Ƚ Includes eleven ER-32 collets
Ƚ R8 taper shank
Ƚ 7/6"-20 drawbar thread
Ƚ Includes spanner wrench, but no case
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", /2", 9/6", 5/8", /6", and 3/4"
3615 Collet Chuck, R8, ER-32 $69.95

2532 Collet Chuck for ER-32 Collets $199.95


Ƚ Mounts on mini lathe spindle
Ƚ Shorter than standard 3-jaw chuck
Ƚ Includes spanner wrench for tightening
Ƚ Allows 3/4" stock through the headstock of the mini lathe
This collet chuck for ER-32 collets mounts on the mini lathe spindle in place of the lathe chuck.
ER-32 collets range in size from 3/32" up to 3/4" so you can run 3/4" stock through the headstock
of your mini lathe.
2662 Collets, ER-25 Set of 15 $129.95
2558 Collets, ER-32 Set of 11 $119.95
2559 Collets, ER-32 Set of 18 $164.95
2557 Collets, ER-32 Set of 6 $64.95

3407 Nut, ER-32 Collet $19.95


Ƚ Fits ER-32 collet chucks

Collets and Chucks: Morse Taper Collets


1752 Collets, 2MT Set of 7 $59.95
Ƚ Set of seven 2 Morse taper round collets
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", and /2"
Ƚ 3/8"-6 drawbar thread
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance

1751 Collet, 1/2" 2MT $10.95


1747 Collet, 1/4" 2MT $10.95
1745 Collet, 1/8" 2MT $10.95
1746 Collet, 3/16" 2MT $10.95
1749 Collet, 3/8" 2MT $10.95
1748 Collet, 5/16" 2MT $10.95
1750 Collet, 7/16" 2MT $10.95

(800) 981 9663 LittleMachineShop.com Page 21


Collets and Chucks: Morse Taper Collets
1948 Collets, 3MT Set of 11 $99.95
Ƚ Set of eleven 3 Morse taper round collets
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", 7/6", /2", 9/6", 5/8", /6", and 3/4"
Ƚ 3/8"-6 drawbar thread
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance

1609 Collet, 1/2" 3MT $13.95


1607 Collet, 1/4" 3MT $13.95
1605 Collet, 1/8" 3MT $13.95
1861 Collet, 11/16" 3MT $13.95
1606 Collet, 3/16" 3MT $13.95
1611 Collet, 3/4" 3MT $13.95
1608 Collet, 3/8" 3MT $13.95
1858 Collet, 5/16" 3MT $13.95
1610 Collet, 5/8" 3MT $13.95
1859 Collet, 7/16" 3MT $13.95
1860 Collet, 9/16" 3MT $13.95

1615 Collets, 3MT Set of 7 $69.95


Ƚ Set of seven 3 Morse taper round collets
Ƚ Includes /8", 3/6", /4", 3/8", /2", 5/8", and 3/4"
Ƚ 3/8"-6 drawbar thread
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance

2023 Collets, 3MT Set of 4 $39.95

Collets and Chucks: R8 Collets


2872 Collets, R8 Set of 23 $95.95
Ƚ Set of 23 R8 round collets
Ƚ Sizes from /6" to 3/4" by 32nds
Ƚ Made of high grade tool steel
Ƚ Hardened and ground to close tolerance

2030 Collets, R8 Set of 11 $46.95


1604 Collets, R8 Set of 6 $25.95
2605 Collets, R8 Set of 7 $29.95

Collets and Chucks: Taig Collets


1915 Arbor, Sherline/Taig Tooling 3MT $34.95
3MT drawbar shank with 3/8"-6 drawbar thread.
3/4-6 Threaded end for Sherline and Taig chucks and tooling.
Fits Taig collets and collet nut.

2663 Arbor, Sherline/Taig Tooling 2MT $34.95


2317 Collet Set, Taig $30.95

Coolant Systems: Flood Systems


3660 Coolant Hose on Magnetic Base $39.95
Ƚ Great for flood coolant applications
Ƚ Two /4" ID flexible coolant hoses with individual shut offs
Ƚ On/Off switchable magnetic base

(800) 981 9663 LittleMachineShop.com Page 22


Coolant Systems: Flood Systems
3521 Flood Coolant Package $169.95
Ƚ Includes tank, pump, hose, and nozzle plus one gallon of Kool Mist 77
Ƚ Delivers up to 00 GPH
Ƚ Flow can beregulated or shut off without harming pump
Ƚ Screen and chip collector easily removed for cleaning
Ƚ Tank is oil resistant polyethelene
This coolant pump and tank unit is great for bench top milling machines. It is compact (the tank
holds  gallon) and easy to use and clean.
Power: 20V 60Hz 80 watts
Kool Mist 77 coolant is highly recommended for flood cooling any metal or alloy where tougher
machine conditions require greater lubricity. It is particularly useful where the material is very
abrasive. It improves metal cutting, milling, turning, drilling, grinding, and sawing.
Kool Mist 77 is 00% synthetic and biodegradable, and meets the requirements of OSHA & EPA. This
coolant will not cause rancidity or buildup and creates no rust or corrosion when diluted with
clean water. Workpieces and machine parts remain clean and unstained.
Kool Mist 77 is safe for people, safe for materials, safe for the environment, and safe for machines.
Mix this concentrate with 32 parts water before use. One gallon makes 33 gallons of coolant.
3520 Flood Coolant Unit $159.95

Coolant Systems: Mist Systems


2965 Mist Coolant System with Tank, 1 Outlet $194.00
Ƚ Kool Mist model 00NF2 with one spray outlet
Ƚ 2" Lock-Line® spray positioner
Ƚ Heavy duty magnetic base
Ƚ  gallon stainless steel coolant tank
Ƚ Adjustable coolant nozzle and 4' coolant hose
This spray mist unit has a /4 NPT thread for your compressed air supply. (You furnish the air
compressor.)
3458 Mist Coolant System with Tank, 2 Outlets $314.00

2966 PORTaMIST Spray Mist Unit $106.00


Ƚ Kool Mist model 60M2
Ƚ 2" Lock-Line® spray positioner
Ƚ Heavy duty magnetic base
Ƚ Adjustable coolant nozzle
Ƚ 4' coolant and air hoses
This spray mist unit has a male /4 NPT thread for your compressed air supply. (You furnish the air
compressor.)

2226 Spra-Kool Midget Mist Coolant Spray Unit $27.95


Ƚ For turning, drilling, milling, sawing, and grinding
Ƚ Designed to be moved from machine to machine
Ƚ Adjustable nozzle for precise aim
Ƚ Adjustable spray volume
Ƚ Removable strainer prevents clogs
The Spra-Kool Midget unit has successfully been used for over 30 years as a versatile, economical
method of applying a coolant spray for machining.
The Spra-Kool unit works on 30 to 50 PSI air pressure. (You furnish the air compressor.)
Simply attach the ball-check fitting to the air supply, drop the suction tube into a coolant
container, and locate the nozzle by means of the spring-wire attaching clip. The soft wire in the
nose can be bent to direct the spray to the work. It is designed for easy transfer from one machine
to another.
The coolant container can be anything, such as a plastic bottle or a coffee can.
It takes only seconds to locate and set the nozzle for full coverage of any area. Slight adjustment
of the control valve permits regulating the volume from a fine mist to a heavy, wet spray.
Only solid brass fittings are used. There is nothing to rust or corrode. The system is suitable for use
with any type of soluble coolant or oil.
2236 Coolant, Kool Mist 77 Pint $6.95
3804 Spra-Kool Midget Mist Coolant Spray Unit & Coolant SALE $33.95

(800) 981 9663 LittleMachineShop.com Page 23


Cutting Tools: Boring Bars
Cutting Tools: Boring Bars
1246 Boring Bar Set, Carbide 3/8" Shank $15.95
This carbide tipped 9-piece boring bar set includes three different length boring bars each for
minimum bores of 5/6", 3/8", and 7/6". The bore depth ranges from 3/4" to 2-/4".
The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The holder may vary from that shown in the photo.
1247 Boring Bar Set, Carbide 1/2" Shank $17.95
3768 Boring Bar Set, Carbide 1/2" Shank with Holder for Mini Lathe $27.90
3832 Boring Bar Set, Carbide 3/4" Shank $39.95
2682 Boring Bar Set, HSS 1/2" Shank $62.95
2683 Boring Bar Set, HSS 3/8" Shank $45.95

1779 Boring Bar, 3/8" Indexable CCMT Inserts $31.95


This 3/8" diameter indexable boring bar uses CCMT inserts.
The boring bar is 6" long.
Minimum bore diameter is 0.50"
Use CCMT 2.5 or CCMT 2.52 inserts with this boring bar.
This boring bar does not come with an insert. You must purchase inserts separately.
1780 Boring Bar, 1/2" Indexable CCMT Inserts $32.95
3719 Boring Bar, 5/16" Indexable CCMT Inserts $30.95

1720 Boring Bar, 3/8" Indexable HSS Inserts $75.00


Ƚ 3/8" diameter, 5" long boring bar with TPMW-.8.5.5 insert
Ƚ 2 extra TPMW-.8.5.5 high speed steel inserts
Ƚ  extra Torx screw
Ƚ  wrench
This Warner precision boring bar uses high speed steel inserts. Combine the advantages of high
speed steel cutting tools with the convenience of indexable tooling.
1721 Boring Bar, 1/2" Indexable HSS Inserts $80.00

Cutting Tools: Cut-Off Tools


Cut-Off Blades, High Speed Steel
/2" x 4-/2" M2 HSS cut-off blades. These T-shape parting blades provide great side clearance.
PN blades are 0.040 wide.
P Blades are /6" (0.063") wide.
PX blades are 5/64" (0.078") wide.
We carry both imported M2 blades and premium American-made M2 high speed steel cut-off blades
from the A. R. Warner Co.
1929 Cut-Off Blade, P1 $7.95
1728 Cut-Off Blade, P1 A. R. Warner Co. $19.95
3415 Cut-Off Blade, P1 Carbide Tipped $39.95
1930 Cut-Off Blade, P1N $7.95
1729 Cut-Off Blade, P1N A. R. Warner Co. $19.95
1552 Cut-Off Blade, P1X $7.95

Cutting Tools: Drill Sets


3418 Drill Set, 115 Piece Jobber Length Cobalt Steel $399.95
Ƚ Made in USA
Ƚ Bronze color finish
Ƚ 35º split point
5 Piece cobalt steel drill set.
Set includes /6" - /2" by 64ths, A - Z, and No.  - 60.
Cobalt drills display higher red hardness and are especially effective in drilling hard or abrasive
materials.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills.

(800) 981 9663 LittleMachineShop.com Page 24


Cutting Tools: Drill Sets
2826 Drill Set, 115 Piece Jobber Length HSS $124.95
Ƚ Imported
Ƚ Surface treated black finish
Ƚ 8º point
5 Piece high speed steel drill set.
Set includes /6" - /2" by 64ths, A - Z, and No.  - 60.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a metal index for storing the drills.
3043 Drill Set, #1-60 Jobber Length HSS $34.95
2828 Drill Set, 29 Piece Jobber Length HSS $44.95
3044 Drill Set, A-Z Jobber Length HSS $69.95

2827 Drill Set, 115 Piece Screw Machine Length HSS $224.95
Ƚ Made in USA
Ƚ Surface treated black finish
Ƚ Heavy duty 35º split point
5 Piece high speed steel drill set.
Set includes /6" - /2" by 64ths, A - Z, and No.  - 60.
These are screw machine length drills with straight shanks. Screw machine length drills are 5/8 as
long as normal jobber-length drills. These shorter drill bits are useful on mini lathes and mini mills
where there isn't much distance for tools.
Includes a Huot metal index for storing the drills.
2829 Drill Set, 29 Piece Jobber Length HSS $85.95
2830 Drill Set, 29 Piece Screw Machine Length HSS $74.95

2831 Drill Set, 19 Piece Metric Jobber Length HSS $54.95


Ƚ Made in USA
Ƚ Bright finish
Ƚ 8º point
9 Piece metric high speed steel drill set.
Set includes .0 mm - 0.0 mm by 0.5 mm.
These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.
Includes a Huot metal index for storing the drills.

3591 Drill Set, 29 Piece Turbomax Tip $119.95


Ƚ /6" through /2" by /64"
Ƚ Revolutionary tip design stays sharper longer and drills up to 28 percent faster
Ƚ Three-flatted shank design provides better chuck grip and reduces slippage
Ƚ M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
Ƚ Gold oxide finish. Made in US
High speed steel drill bit set with Turbo Point tip.
29-piece set in metal index case includes drill bit sizes /6" through /2" in /64" increments.
These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are
normal length drills.
Three-flatted shank design is ideal for use in keyless chucks.
3590 Drill Set, 21 Piece Turbomax Tip $54.95

Cutting Tools: Drills


1230 Center Drills, Set of 5 (Numbers 1-5) $5.49
This set includes 5 different sizes of combined drills and countersinks, commonly called center
drills.
The set is high speed steel and includes sizes ,2,3,4, and 5. These are 60 degree center drills.

2985 Center Drill, Number 1 $0.95


2986 Center Drill, Number 2 $0.95
2987 Center Drill, Number 3 $1.25
2988 Center Drill, Number 4 $1.95
2989 Center Drill, Number 5 $2.95
2990 Center Drills, Set of 4 (Numbers 1-4) $3.95

(800) 981 9663 LittleMachineShop.com Page 25


Cutting Tools: Drills
3604 Step Drill Bit, 3/16" - 7/8" Irwin Unibit $42.95
Ƚ 2 steps of /6" from 3/6" - 7/8"
Ƚ /8" maximum material thickness
Ƚ Single-flute cutting edge for greater control through steps
Ƚ 3 flatted shank prevents slipping in drill chuck
Ƚ Made in US
The Irwin Unibit is ideal for drilling holes into thin materials such as stainless steel, copper, brass,
aluminum, plastic and laminates.

Cutting Tools: End Mills


Dovetail Cutters
Ƚ High speed steel cutters
Ƚ 60° dovetail angle
Ƚ 3/8" shank diameter

2905 Dovetail Cutter, 60° 1/2" Diameter $14.95


2906 Dovetail Cutter, 60° 3/4" Diameter $15.95
2904 Dovetail Cutter, 60° 3/8" Diameter $13.95

1245 End Mill Set, 10 pieces 2 & 4 Flute $32.95


Ƚ 0 piece TiN coated HSS end mill set
Ƚ Includes both 2 flute and 4 flute end mills
Ƚ Center cutting end mills
Ƚ Includes /4", 3/8", /2" , 5/8", and 3/4" end mills
This 0 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills.
The set comes in a fitted case.

1244 End Mill Set, 20 pieces 2 & 4 Flute $69.95


Ƚ 20 piece TiN coated HSS end mill set
Ƚ Includes both 2 flute and 4 flute end mills
Ƚ Center cutting end mills
Ƚ 3/6" to 3/4" by 6ths
The 3/6" through 7/6" end mills have a 3/8" shank.
The /2" and 9/6" end mills have a /2" shank.
The 5/8" and /6" end mills have a 5/8" shank.
The 3/4" end mill has a 3/4" shank.
The set comes in a fitted case.

1242 End Mill Set, 6 Piece 2 Flute $17.95


Ƚ 6 piece HSS end mill set
Ƚ 2 flute end mills
Ƚ Center cutting end mills
Ƚ Includes /8", 3/6", /4", 5/6", 3/8", /2" end mills
Ƚ All end mills have 3/8" shank.
The set comes in a wood stand.
2902 End Mill Set, 6 Piece 2 Flute Ball $45.95
1243 End Mill Set, 6 Piece 4 Flute $18.95
2903 End Mill Set, 6 Piece 4 Flute Ball $34.95

2548 End Mill Set, Miniature, 10 pieces 2 & 4 Flute $39.95


Ƚ 0 piece miniature HSS end mill set
Ƚ Includes both 2 flute and 4 flute end mills
Ƚ Double ended, center cutting end mills
Ƚ Includes /6", 3/32", /8", 5/32" & 3/6” end mills
Ƚ All end mills have 3/6" shank
The set comes in a wood stand.

(800) 981 9663 LittleMachineShop.com Page 26


Cutting Tools: End Mills
1952 Indexable End Mill, R8 $39.95
This indexable end mill has a .25" cutting diameter.
It has an R8 shank and comes with one set of inserts.

1889 Indexable End Mill, 2MT $39.95


1146 Indexable End Mill, 3MT $62.95
2697 Screws, Insert Retaining $4.75
1798 Screws, Insert Retaining $4.75

Cutting Tools: Engraving Tools


3776 Engraving Tool, Half Round, 0.005" Line Width $13.95
Ƚ Submicron grade carbide
Ƚ /8" shank,  /2" overall length
Ƚ Appropriate for /6" tall characters
Ƚ Use for aluminum, steel, and stainless steel
Ƚ Kyocera Micro Tools PN HR25SSS005A
These engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys,
titanium, cast iron, aluminum, copper, brass, and plastics.
These cutters might cause a bur when used on plastics.
3777 Engraving Tool, Half Round, 0.010" Line Width $13.95
3778 Engraving Tool, Half Round, 0.020" Line Width $13.95

3779 Engraving Tool, Spade, 90 Degree Spade Angle $13.95


Ƚ Submicron grade carbide
Ƚ /8" shank,  /2" overall length
Ƚ Recommended for use with plastics
Ƚ Use for aluminum, steel, and stainless steel
Ƚ Kyocera Micro Tools PN SPD250-090
These engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys,
titanium, cast iron, aluminum, copper, brass, and plastics.
These cutters cause fewer burs on plastics.

Cutting Tools: Indexable Inserts


Inserts, Application Chart
For information about which insert to use with each of our tools, see the insert application chart
at the back of this catalog.

Inserts, Carbide
Carbide inserts.
These inserts fit our indexable tools.

1781 Insert, CCMT-21.51 Carbide $4.95


1795 Insert, CCMT-32.52 Carbide $4.95
1680 Insert, TCMM-221 Carbide $4.95
2381 Insert, TCMM-321 Carbide $5.49
2033 Insert, TCMT-1.81.51 Carbide $3.95
3416 Insert, TCMT-21.50 Carbide $3.95
1670 Insert, TCMT-21.51 Carbide $3.95
3417 Insert, TCMT-21.52 Carbide $3.95
1910 Insert, TPCN1103PDR Carbide $3.55
1216 Insert, TPCN1603PDR Carbide $3.55
2277 Insert, TPG322 Carbide $3.75
3471 Insert, VCMT-222 Carbide $13.95

(800) 981 9663 LittleMachineShop.com Page 27


Cutting Tools: Indexable Inserts
Inserts, High Speed Steel
High speed steel inserts.
These inserts are made from T-5 high speed steel by the A. R. Warner Co.
Combine the advantages of high speed steel cutting tools with the convenience of indexable
tooling.
3578 Insert, 1/16" (0.062") Groover HSS $10.00
3577 Insert, 1/32" (0.031") Groover HSS $10.00
3576 Insert, 1/64" (0.015") Groover HSS $10.00
3696 Insert, CCMW-2-1.5-1 High Speed Steel $6.25
3573 Insert, CCMW-3-2.5-.5 High Speed Steel $6.50
3574 Insert, CCMW-3-2.5-1 High Speed Steel $6.50
3575 Insert, CCMW-3-2.5-2 High Speed Steel $6.50
3697 Insert, CEMW-2-1.5-1 High Speed Steel $6.25
1724 Insert, TCMW-21.51 High Speed Steel $6.95
1725 Insert, TCMW-21.52 High Speed Steel $6.95
3700 Insert, TCMW-221 High Speed Steel $6.95
3698 Insert, TCMW-321 High Speed Steel $6.95
3468 Insert, TNMC-32-NV High Speed Steel Threading $12.95
1623 Insert, TPMB-321 High Speed Steel $6.95
1622 Insert, TPMB-322 High Speed Steel $6.95
3469 Insert, TPMC-32-NV High Speed Steel Threading $13.95
1722 Insert, TPMW-1.81.5.5 High Speed Steel $6.95
1723 Insert, TPMW-1.81.51 High Speed Steel $6.95
1624 Insert, TPMW-221 High Speed Steel $6.95
1621 Insert, TPMW-222 High Speed Steel $6.95
3470 Insert, VCMW-222 High Speed Steel $8.95

Cutting Tools: Reamers


3066 Reamers, 14 Piece Over-Under Chucking HSS $109.95
Ƚ Includes 0.000" over and 0.000" under for /8" to /2" by 6ths
Ƚ Straight shank and straight flute high speed steel reamers
Ƚ Imported
Ƚ Includes plastic pouch
This set of high speed steel chucking reamers includes 0.240", 0.260", 0.865", 0.885", 0.2490",
0.250", 0.35", 0.335", 0.3740", 0.3760", 0.4365", 0.4385", 0.4990", 0.500" reamers.

3067 Reamers, 29 Piece Chucking HSS $169.95


Ƚ includes /6" - /2" by 64ths
Ƚ Straight shank and straight flute high speed steel reamers
Ƚ Imported
Ƚ Includes plastic pouch

(800) 981 9663 LittleMachineShop.com Page 28


Cutting Tools: Rotary Broaches
Cutting Tools: Rotary Broaches
3772 Rotary Broach Tool Holder 2MT $79.95
Ƚ Creates square and hexagonal, blind or through holes
Ƚ Broach depth to .5 times broach width
The rotary broach creates square and hexagonal, blind or through holes. It can be used in a milling
machine or a lathe.
The broaching depth can be up to .5 times the dimension across the flats of the shape you want
to broach. For example, you can broach a ¼" square hole up to 0.375" deep.
The material to be broached should not be harder than 200 Brinell. This means you can broach
aluminum, brass, bronze, soft cast iron, and mild steel. In general, you are safe with any steel
where the last two digits of the AISI number are less than 30.
The rotary broach tool holder is a lot like a live center. There is a bearing between the tool and
the shank. But the tool is mounted at a  degree angle to the shank. So as the shank rotates, it
"wobbles" the cutting tool. This  degree wobble advances each of the facet cutting edges in turn
as the broach advances into the hole. The material that is removed curls into the bottom of the
hole.
3903 Rotary Broach Tool Holder R8 $99.95
3922 Rotary Broach, 1/4" Hex $29.95
3917 Rotary Broach, 1/4" Square $29.95
3920 Rotary Broach, 1/8" Hex $29.95
3915 Rotary Broach, 1/8" Square $29.95
3904 Rotary Broach, 3 mm Hex $29.95
3909 Rotary Broach, 3 mm Square $29.95
3921 Rotary Broach, 3/16" Hex $29.95
3916 Rotary Broach, 3/16" Square $29.95
3924 Rotary Broach, 3/8" Hex $29.95
3919 Rotary Broach, 3/8" Square $29.95
3773 Rotary Broach, 4 mm Hex $29.95
3910 Rotary Broach, 4 mm Square $29.95
3905 Rotary Broach, 5 mm Hex $29.95
3911 Rotary Broach, 5 mm Square $29.95
3923 Rotary Broach, 5/16" Hex $29.95
3918 Rotary Broach, 5/16" Square $29.95
3926 Rotary Broach, 5/32" Hex $29.95
3906 Rotary Broach, 6 mm Hex $29.95
3912 Rotary Broach, 6 mm Square $29.95
3907 Rotary Broach, 7 mm Hex $29.95
3913 Rotary Broach, 7 mm Square $29.95
3927 Rotary Broach, 7/32" Hex $29.95
3908 Rotary Broach, 8 mm Hex $29.95
3914 Rotary Broach, 8 mm Square $29.95
3925 Rotary Broach, 9/64" Hex $29.95

(800) 981 9663 LittleMachineShop.com Page 29


Cutting Tools: Saw Blades
Cutting Tools: Saw Blades
Band Saw Blades, Starrett Powerband Matrix II
Starrett Powerband Matrix II band saw blade 64-/2" x /2" x 0.025".
The 6/P-HP blade has 6 teeth per inch, for cutting sections over ” thick. The 8-2S blade has 8-2
teeth per inch, for cutting sections over /32" to -/2" thick.
The hook tooth shape on the 6/P-HP blade has a 0" positive rake for fast cutting of non-ferrous
metals and non-metallics. The 0-4S blade has 0-4 teeth per inch, for cutting sections over
/4” to -/4” thick.
The regular tooth shape on the 8-2S and 0-4S blades is the conventional tooth for general
purpose sawing, straight zero rake.
These blades fit the popular 4x6 band saw sold by Harbor Freight, Grizzly and many others.
The variable tooth pitch reduces noise levels and vibration and cuts structurals, tubing and solids
smoothly and quickly.
Powerband Matrix II is the ideal general-purpose metal sawing blade.
This bi-metal blade has a Matrix II high-speed steel cutting edge welded to an alloy steel back. This
steel resists heat, abrasion and shock, which allows faster cutting rates over a wide range of
materials.
1876 Band Saw Blade, 64-1/2” Powerband Matrix II 10-14S $26.95
1854 Band Saw Blade, 64-1/2” Powerband Matrix II 6/P-HP $26.95
1855 Band Saw Blade, 64-1/2” Powerband Matrix II 8-12S $26.95

Band Saw Blades, Starrett Premium Hard Back


Starrett Premium Hard Back band saw blade 64 /2" x /2" x 0.025".
The 6/S blade has 6 teeth per inch, for cutting sections over ” thick. The 0/S blade has 0 teeth
per inch, for cutting sections from 3/8" to -/4" thick.
It has a skip tooth shape with zero rake, widely spaced teeth and shallow gullets for cutting large
sections.
These blades fit the popular 4x6 band saw sold by Harbor Freight, Grizzly and many others.
This high carbon steel band has precisely hardened teeth, coupled with a hard, tough spring-
tempered back, resulting in a high tensile strength. Greater band tension and improved blade
rigidity increases cutting rates and provides more accurate cuts.
Applications are light to medium vertical and horizontal machines, tool room and maintenance,
low alloy, non-ferrous metals.
Benefits: Economical production cutting. Increased tensile strength. More accurate and straighter
cuts. Improved blade rigidity for increased cutting rates.
1852 Band Saw Blade, 64-1/2" Premium Hard Back 6/S $12.95
1853 Band Saw Blade, 64-1/2” Premium Hard Back 10/S $12.95

1849 Hacksaw Blade, Bi-Metal, 14 TPI, Starrett $1.62


Starrett Bearcat Bi-Metal BGT Hacksaw Blade with Ground Teeth.
Starrett catalog number BS24
This blade is 2” long and has 4 teeth per inch. The blade is 0.025” thick.
Bearcat (BGT) blades feature precision ground high-speed steel teeth coupled with a super-
efficient, aggressive Bearcat tooth design. This unique combination results in faster cutting and
longer blade life. Tests have shown the blades to cut as much as 30% faster than regular bi-metal
blades.
1850 Hacksaw Blade, Bi-Metal, 18 TPI, Starrett $1.62
1851 Hacksaw Blade, Bi-Metal, 24 TPI, Starrett $1.62
3561 Hacksaw Blade, Bi-Metal, 32 TPI, Starrett $1.62

(800) 981 9663 LittleMachineShop.com Page 30


Cutting Tools: Screw Extractors
Cutting Tools: Screw Extractors
3596 Screw Extractor & Drill Bit 6-pc Set $9.95
Ƚ EX-, EX-2, and EX-3 Spiral flute screw extractors
Ƚ Three matching high speed steel drill bits
Ƚ Removes 3/32” – 9/32”, 2.5 mm – 8 mm, No. 3 – No. 4 screws
Always have exactly the right drill bit for your screw extractors by purchasing both together.
Set includes spiral flute screw extractors in sizes: EX-, EX-2, EX-3 and HSS drill bits in sizes: 5/64",
7/64", and 5/32" in a vinyl pouch.
Designed to remove broken studs, bolts, socket screws and fittings.
Aggressive left hand spiral design for extra gripping power. Spiral flutes are designed to embed
themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the
extractor's grip increases.
Extractor size and recommended drill bit size are etched on each tool.
High speed steel drill bit ensures fast, clean drilling.
3592 Screw Extractor & Drill Bit, #1 Spiral $2.49
3598 Screw Extractor & Drill Bit, #2 Spiral $2.95
3594 Screw Extractor & Drill Bit, #3 Spiral $3.49
3599 Screw Extractor & Drill Bit, #4 Spiral $4.49

Cutting Tools: Taps & Dies


2851 Die Set, 0-80 to 5-40 Threads $92.95
Ƚ Miniature tap set includes 0-80, -64, 2-56, 3-48, 4-40, and 5-40 dies
Ƚ Round adjustable split dies
Ƚ 3/6" diameter
Ƚ High Speed Steel
Ƚ Imported
For cutting external screw threads either by hand or with a die stock or by machine with a die
holder. They can be utilized to cut smaller or larger tolerance by turning the adjustment screw.
2842 Die, 0-80 Thread $15.95
3675 Die, 10-32 Thread $15.95
2843 Die, 1-64 Thread $15.95
2844 Die, 2-56 Thread $15.95
2845 Die, 3-48 Thread $15.95
2846 Die, 4-40 Thread $15.95
2847 Die, 5-40 Thread $15.95
2848 Die, 6-32 Thread $15.95
2849 Die, 8-32 Thread $15.95

3601 Tap & Die Set, 39-Piece Solid Round Dies $121.95
Ƚ 39-piece machine screw & fractional tap and solid round die set
Ƚ Machine screw and fractional sizes of plug style taps plus " solid round dies
Ƚ Includes three tap handles and two die stocks
Ƚ 8-leaf standard thread pitch gauge and screwdriver
Ƚ Plastic case with lift-out tray
This USA-made Hansen brand 39 PC set can be used to create new threads.
The Hanson 39-Piece Machine Screw / Fractional Tap and Solid Round Die Set includes machine
screw taps, fractional plug style taps, plus -inch solid round dies. A adjustable guide diestock for
cutting external threads on metal cylinders is included, as well as a adjustable handle tap wrench
to create internal screw threads, and a T-handle tap wrench. There's also an 8-leaf standard
thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.
39-pc set in plastic case includes the following items:
Machine Screw Plug Tap and " Solid Round Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 0 - 24
NC, 0 - 32 NF, 2 - 24 NC
Fractional Plug Tap and " Solid Round Dies in sizes: /4" - 20 NC, /4" - 28 NF, 5/6" - 8 NC,
5/6" - 24 NF, 3/8" - 6 NC, 3/8" - 24 NF, 7/6" - 4 NC, 7/6" - 20 NF, /2" - 3 NC, /2" - 20 NF
Pipe Thread Plug Tap and " Solid Round Dies in sizes: /8" - 27 NPT
Threading Tools: Adjustable Die Stock - " Dies, T-Handle Wrench - Taps No. 0 to /4", Adj. Handle
Tap Wrench - Taps No. 0 to /2", 8 Leaf Standard Thread Pitch Gauge, Empty Plastic Case

(800) 981 9663 LittleMachineShop.com Page 31


Cutting Tools: Taps & Dies
3597 Tap & Die Set, 41-Piece $122.95
Ƚ 4-piece machine screw & fractional hexagonal tap and die set for threading operations
Ƚ Machine screw and fractional sizes of plug style taps plus 5/8" and " hexagon dies
Ƚ Includes three tap handles and two die stocks
Ƚ 8-leaf standard thread pitch gauge and screwdriver
Ƚ Plastic case with lift-out tray
This USA-made Hansen brand 4 PC set can be used to restore or start new threads.
The Hanson 4-Piece Machine Screw / Fractional Tap and Hex Die Set includes machine screw
taps, fractional plug style taps, plus 5/8-inch and -inch hexagon dies in 7 different sizes. A DS-26
adjustable guide diestock and DS-57 plain diestock for cutting external threads on metal cylinders
is included, as well as a TR-88 adjustable handle tap wrench to create internal screw threads, a TR-
73 two-in-one tap wrench, and a TR-50 two-in-one tap wrench. There's also an 8-leaf standard
thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.
4-pc set in plastic case includes the following items:
Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 0 - 24 NC,
0 - 32 NF, 2 - 24 NC
Fractional Plug Tap and " Hexagon Dies in sizes: /4" - 20 NC, /4" - 28 NF, 5/6" - 8 NC, 5/6" -
24 NF, 3/8" - 6 NC, 3/8" - 24 NF, 7/6" - 4 NC, 7/6" - 20 NF, /2" - 3 NC, /2" - 20 NF
Pipe Thread Plug Tap and " Hexagon Dies in sizes: /8" - 27 NPT
Threading Tools: Adjustable Die Stock - " Dies, Plain Die Stock - 5/8" Hexagon Dies, Adj. Handle
Tap Wrench - Taps No. 0 to /2", T-Handle Wrench - Taps No. 0 to /4", Two-in-One Tap Wrench -
Taps /4" to /2", 8 Leaf Standard Thread Pitch Gauge, Empty Plastic Case
3600 Tap & Die Set, 41-Piece Metric $136.95

2540 Tap & Die Set, 41-Piece $39.95


Ƚ Tungsten Steel
Ƚ Hex dies are ideal for working in tight places
Ƚ Furnished in a fitted case with lift-out tray
Ƚ Imported
This 4-piece tap and die set includes all the common sizes from #4 to /2".
The set includes a screw pitch gage, a die stock and a T-handle tap wrench.
The threads covered include:
NC: 4-40, 6-32, 8-32, 0-24, 2-24, /4”-20, 5/6”-8, 3/8”-6, 7/6”-4, /2”-3
NF: 0-32, /4”-28, 5/6”-24, 3/8”-24, 7/6”-20, /2”-20
NPT: /8”-27
2541 Tap & Die Set, 41-Piece Metric $39.95

2841 Tap Set, 0-80 to 5-40 Thread $34.95


Ƚ Miniature tap set includes 0-80, -64, 2-56, 3-48, 4-40, and 5-40 taps
Ƚ High speed steel with ground thread
Ƚ Plug tap has a 3-5 thread taper
Ƚ Made in USA
Hand taps are the most commonly used general purpose tap. They are recommended for tapping
free machining steels, stainless steels, aluminum, zinc, and ductile materials. Hand taps are
utilized in either through or blind hole tapping.
2832 Tap, 0-80 Thread $7.95
2840 Tap, 10-24 Thread $3.49
3676 Tap, 10-32 Thread $3.49
2833 Tap, 1-64 Thread $7.49
2834 Tap, 2-56 Thread $6.49
2835 Tap, 3-48 Thread $4.95
2836 Tap, 4-40 Thread $4.49
2837 Tap, 5-40 Thread $4.49
2838 Tap, 6-32 Thread $3.49
2839 Tap, 8-32 Thread $3.49

(800) 981 9663 LittleMachineShop.com Page 32


Cutting Tools: Threading
Cutting Tools: Threading
3467 Threading Tool, 1/2" Indexable HSS Inserts $85.00
Ƚ For internal and external threading
Ƚ /2" shank, 3/8" IC Inserts, 5" long
Ƚ 2 inserts included: TNMC-32-NV and TPMC-32-NV
Ƚ  extra 6-32 flat head cap screw
Ƚ  wrench
This A R Warner precision threading tool will turn both internal and external threads. You can
mount inserts on both ends. One end mounts the insert at the end of the tool for external
threading. The mount on the other end is offset. Mount the insert one way for internal threading.
Turn the insert around and you can use the tool for external threading too.
The minimum bore diameter for internal threading is .375". The maximum thread depth is 0.00".
3581 Screw, Insert Retaining $0.95

3571 Threading Tool, 1/2" Insertable TPMW HSS Inserts $81.00


Ƚ For internal threading
Ƚ Includes three T-5 high speed steel TPMW-22 inserts
Ƚ Includes two MS-53 screws and one T-7 wrench
This A R Warner boring bar for single-point cutting internal threads has 0.5" shank and is 6" long.
Approxiately 0.55" minimum hole size.
Uses TPMW-22 and TPMW-222 inserts.
The maximum thread depth is 0.00".

3695 Threading Tool, 3/8" Indexable HSS Inserts $85.00


Ƚ For internal and external threading
Ƚ 3/8" shank, 3/8" IC Inserts, 5" long
Ƚ 2 inserts included: TNMC-32-NV and TPMC-32-NV
Ƚ  extra 6-32 flat head cap screw
Ƚ  wrench
This A R Warner precision threading tool will turn both internal and external threads. You can
mount inserts on both ends. One end mounts the insert at the end of the tool for external
threading. The mount on the other end is offset. Mount the insert one way for internal threading.
Turn the insert around and you can use the tool for external threading too.
The minimum bore diameter for internal threading is .375". The maximum thread depth is 0.00".

3570 Threading Tool, 3/8" Insertable TPMW HSS Inserts $81.00


Ƚ For internal threading
Ƚ Includes three T-5 high speed steel TPMW-.8-.5-.5 inserts
Ƚ Includes two MS-52S screws and one T-7 wrench
This A R Warner boring bar for single-point cutting internal threads has 0.375" shank and is 5" long.
This tool requires a 0.5" minimum hole size.
Uses TPMW-.8-.5-.5 and TPMW-.8-.5- inserts.
The maximum thread depth is 0.00".

2221 Tool Bit, 5/16" HSS Threading $9.95


This threading tool bit is sharpened on both ends to a 60° angle for threading.
It is made from high speed steel.
Both ends are offset, one so you can thread near a left shoulder, and the other so you can thread
near a right shoulder.
1895 Tool bit, 1/4" HSS Internal Threading $12.95

Cutting Tools: Turning Tools


3572 Grooving & Cutoff Tool, Indexable HSS Inserts $90.00
Ƚ For external grooving and cutoff operations
Ƚ Includes three /6 (.062”) groover T-5 high speed steel inserts
Ƚ Includes two /32 (.03”) groover T-5 high speed steel inserts
Ƚ Includes two IS 3007 screws and one T-9 wrench
This A R Warner grooving and cut-off tool has a 0.375" shank and is 4.5" long.
The maximum cutting depth of the groover inserts is approximately 0.25".
3579 Screw, Insert Retaining $1.95

(800) 981 9663 LittleMachineShop.com Page 33


Cutting Tools: Turning Tools
2431 Profiling Tool, 3/8" HSS & Carbide Inserts $85.00
Ƚ 3/8" square, 6" long profiling tool
Ƚ Uses HSS and carbide inserts
Ƚ Includes 2 HSS inserts and one carbide insert
Ƚ  extra Torx screw
Ƚ  wrench
This Warner precision profiling tool uses high speed steel or carbide inserts. Combine the
advantages of high speed steel cutting tools with the convenience of indexable tooling.
This profiling tool is great for CNC applications, and can be used for most of your turning needs.

1658 Tool Bit, 5 mm x 8 mm Presharpened $14.95


This 5 mm x 8 mm presharpened tool bit fits one of the tool holders in our 24 Tool holders and
Tools Bits set.

3192 Tool Bit, 5/16" Right Hand Brazed Carbide $1.95


Ƚ AR-5 brased carbide turning tool
Ƚ Right hand tool; cuts from right to left
These tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby
use works fine on aluminum and non-ferrous metals too.
3193 Tool Bit, 5/16" Left Hand Brazed Carbide $1.95

2250 Tool Bits, 1/4" Presharpened Set of 6 $28.95


Ƚ Six presharpened /4" high speed steel tool bits
Ƚ Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off

1966 Tool Bit, 1/4" 45 Degree Chamfer Presharpened $5.50


1968 Tool Bit, 1/4" Boring Bar Presharpened $5.50
1969 Tool Bit, 1/4" Cut-Off Presharpened $5.50
1964 Tool Bit, 1/4" Left Hand Presharpened $5.50
1965 Tool Bit, 1/4" Right Hand Presharpened $5.50
1967 Tool Bit, 1/4" Round Nose Presharpened $5.50

2412 Tool Bits, 5/16" Brazed Carbide Set of 5 $24.95


This set includes five different brazed carbide turning tools. The shanks are 5/6" which is the
right size for the mini lathe.
This set includes one each of the following tool bits: DIN 497R, DIN 4975, DIN 4980R, DIN 4980L,
DIN 498R.

1657 Tool Bits, 6 mm Presharpened Set of 2 $28.95


Two presharpened 6 mm tool bits.
One bit is ground for threading on one end and turning on the other end. The other bit is ground
for cut-off on one end and turning on the other end.
The tool bits fit our 24 Tool holders and Tools Bits set, and can be used in other tool posts as
well.

(800) 981 9663 LittleMachineShop.com Page 34


Cutting Tools: Turning Tools
Tool Bits, High Speed Steel
2-/2" long HSS tool bits
We carry both imported tool bits made of M2 high speed steel and American-made tool bits made
of T-5 high speed steel from the A. R. Warner Co.

1155 Tool Bit, 1/4" M2 $1.29


1717 Tool Bit, 1/4" T-15 $6.75
1154 Tool Bit, 1/8" M2 $0.95
1726 Tool Bit, 1/8" T-15 $6.25
1153 Tool Bit, 3/16" M2 $0.95
1716 Tool Bit, 3/16" T-15 $6.50
1156 Tool Bit, 3/8" M2 $2.49
1718 Tool Bit, 3/8" T-15 $9.95
1152 Tool Bit, 5/16" M2 $1.39
1715 Tool Bit, 5/16" T-15 $8.75

1214 Tool holders and Tool Bits $59.95


These tool holders hold the included tool bits at the proper cutting height in the mini lathe tool
post.
One holds a cutting tool straight, and the other holds one at a 45º angle.
The set includes the two tool holders, three tool bits, and an Allen wrench. Two of the tool bits
are 6 mm square. The other is 5 mm x 8 mm.

3693 Turning (1/4") and Boring (3/8") Tools, Indexable HSS Inserts $128.00
Ƚ Right and left hand turning tools with 0.250" shank 3.5" long
Ƚ Boring bar with 0.375" shank 5.0" overall length
Ƚ Includes three T-5 High Speed Steel CCMW-2-.5- inserts for turning
Ƚ Includes two T-5 High Speed Steel CEMW-2-.5- inserts for boring
Ƚ Includes two MS-52S screws, four MS-53 screws and one T-7 wrench
This A R Warner kit includes a /4" right-hand turning tool, a /4" left-hand turning tool, and a
3/8" boring bar.
The r ight hand turning bar has a 0.250” shank, and is 3.50” in overall length.
The left hand turning bar has a 0.250” shank, and is 3.50” in overall length. The left hand turning
bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This
provides a way to use the two insert points that are not used in the other tool holders.
The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.88" flat along length for
location, and requires a 0.365" minimum bore.

3694 Turning and Boring Tools, 3/8" Indexable HSS Inserts $130.00
Ƚ Right and left hand turning tools with 0.375" shank 3.5" long
Ƚ Boring bar with 0.375" shank 5.0" overall length
Ƚ Includes three T-5 High Speed Steel CCMW-2-.5- inserts for turning
Ƚ Includes two T-5 High Speed Steel CEMW-2-.5- inserts for boring
Ƚ Includes two MS-52S screws, four MS-53 screws and one T-7 wrench
This A R Warner kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a
3/8" boring bar.
The r ight hand turning bar has a 0.375” shank, and is 3.50” in overall length.
The left hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning
bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This
provides a way to use the two insert points that are not used in the other tool holders.
The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.88" flat along length for
location, and requires a 0.365" minimum bore.

(800) 981 9663 LittleMachineShop.com Page 35


Cutting Tools: Turning Tools
3569 Turning Tools, 1/2" Indexable CCMW HSS Inserts $100.00
Ƚ Right hand tool holder
Ƚ Left hand tool holder, double ended
Ƚ Includes five T-5 high speed steel CCMW-3-2.5-2 inserts
Ƚ Includes four MS-55 screws and one T-5 wrench
Right hand bar has 0.5" shank and is 4" long.
Left hand bar has 0.5" shank and is 4" long. It includes a second insert pocket that provides a 50°
side cutting edge.
Uses CCMW-3-2.5-.5, CCMW-3-2.5-, and CCMW-3-2.5-2 inserts.
The second insert pocket on the left hand tool provides a way to use the second and fourth corners
on the diamond insert.
Made by A R Warner.
3580 Screw, Insert Retaining $1.95

1679 Turning Tools, 3/8" Indexable TCMM inserts $32.95


This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), carbide inserts,
wrenches, and extra screws. It comes in a plastic case.
The carbide inserts are TCMM-22 (or TT-22).

2286 Turning Tools, 1/2" Indexable TCMM inserts $33.95


1913 Turning Tools, 1/4" Indexable TCMM inserts $33.95

1669 Turning Tools, 3/8" Indexable TCMT Inserts $32.95


This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench,
and extra screws. It comes in a wooden case.
The carbide inserts are TCMT2.5.
You can also use high speed steel TCMW-2.5 or TCMW-2.52 inserts.

1619 Turning Tools, 3/8" Indexable TPMW HSS Inserts $120.00


Ƚ Style AR right hand tool
Ƚ Style BR right hand tool with a 5° lead angle
Ƚ Style E Neutral threading tool with 60° included angle
Ƚ Style BL left hand tool with a 5° lead angle
Ƚ Style AL left hand tool
These Warner precision tool holder kits use high speed steel inserts. Combine the advantages of
high speed steel cutting tools with the convenience of indexable tooling.
The kit contains the following:
5 tool holder styles with TPMW-222 inserts
 extra TPMW-222 high speed steel insert
 extra Torx screw
 wrench
1620 Turning Tools, 1/2" Indexable TPMB HSS Inserts $128.00
1719 Turning Tools, 1/4" Indexable TPMW HSS Inserts $115.00

DROs: Displays
1990 Cable, DRO Mini-DIN $13.95
Ƚ These cables connect the inexpensive imported DRO scales to a display unit
Ƚ 4-pin mini-DIN connector on one end
Ƚ Proprietary 4-pin rectangular connector on other end
Ƚ Cable length is 2 meters (78 inches)
3483 Cable, DRO RJ-11 $13.95

DROs: DRO Packages


2222 Digital Position Readout, 2-Axis Mini Lathe $149.95
Ƚ This DRO kit is specifically made for the 7x0, 7x2, and 7x4 mini lathe
Ƚ Mounts right on the cross slide and compound rest to give you accurate depth-of-cut readings
Ƚ Resolution: 0.000", accuracy: 0.00"
Ƚ Buttons for On/Off, Zero, and Inch/MM.
All the parts shown in the photo are included, so this works on any 7x0, 7x2, or 7x4 lathe made
by SIEG, which includes virtually all the mini lathes sold in the US and most of the mini lathes sold
world-wide.
3463 Digital Position Readout, 2-Axis C4 Lathe $199.95
2869 Digital Position Readout, 2-Axis C6 Lathe $199.95

(800) 981 9663 LittleMachineShop.com Page 36


DROs: DRO Packages
3811 Digital Position Readout, 3-Axis DRO Pros $799.00
Ƚ Easiest to use DRO on the market. More buttons, most intuitive layout--just walk up and operate
Ƚ 5 micron (0.0002") resolution.  micron (0.00005") resolution with inexpensive scale upgrade
Ƚ 72-page full-color manual and video training DVD
Ƚ 3-year warranty
Ƚ SlimLine 20 mm x 28.5 mm (0.79" x .2") scales; you choose the length, up to 000 mm (39.3")
The DRO PROS 3M three-axis mill package includes everything you need: the display head; 3 glass
scales up to 000 mm (39.3") travel; detailed installation instructions; a detailed full-color, 72-
page operator’s manual; 3-year warranty; display mounting arm; power cord; mounting hardware;
and universal mounting brackets.
The package includes your choice of 9 different size scales ranging in travel from 00 mm (3.9")
up to 000 mm (39.3") in 50 mm increments. Optionally, you can choose  micron (0.00005")
resolution scales for an additional $50.00 per scale.
Operates on 20V or 240V AC.
3929 Digital Position Readout, 2-Axis DRO Pros $599.00

2665 Digital Position Readout, 3-Axis Shooting Star $749.00


Ƚ Shooting Star BT-3 3-axis digital position readout
Ƚ Includes the digital display unit, 3 scales, and mounting hardware
Ƚ Resolution: 0.0005", accuracy: 0.00"
Ƚ The keypad is a splash-proof membrane with tactile keys in a sturdy metal enclosure
Ƚ Guaranteed to fit any mill, lathe, or 3-in- machine
Shooting Star BT-3 3-axis digital position readout functions include: Inch/mm display, reversible
count direction (change the direction in which the count goes up), automatic centering (find the
center of a workpiece or hole by touching off two sides), two sets of coordinates (good for placing
hole patterns, making slots and such), enter coordinates (you can enter the values for the current
location), bolt circle and bolt line calculators (quickly create a pattern of holes), tool offsets
(remember the setting for various lathe tools), and preset positions (quickly return to positions you
have saved).
This DRO uses a precision rack and anti-backlash pinion, with an optical encoder on the pinion.
Power: 20VAC.
This DRO includes one 48" scale and two 6" scales. The scales are easily shortened to suit your
machine. It will fit on the mini mill with a power feed installed.
2664 Digital Position Readout, 2-Axis Shooting Star $599.00
3568 Digital Position Readout, 3-Axis Shooting Star for X3 Mill $749.00

DROs: Scales
2015 DRO Scale 16" (400 mm) $108.00
Ƚ Digital scale unit has a range of 0-6" (0-400mm)
Ƚ Includes two mounting brackets
Ƚ Resolution is 0.0005" (0.0mm) and the accuracy is 0.00" (0.03 mm)
Ƚ Data output jack works with many digital display units
Ƚ One SR 44 .5V battery is included
The scale cross section is 6 mm x 4 mm. The scale is 520 mm long. With the mounting brackets
installed, it is 545 mm long overall.
This scale is the correct length for the carriage motion on 7x4 mini lathes.
2014 DRO Scale 12" (300 mm) $85.00
3091 DRO Scale 20" (500 mm) $160.00
2012 DRO Scale 4" (100 mm) $49.00
2013 DRO Scale 8" (200 mm) $69.00

Kits: Conversion Kits


2258 Air Spring Conversion Kit $39.95
Convert torsion spring mini mills to air spring.
Newer mini mills use a torsion spring mounted on the side of the column to support the head. This
kit provides all the parts required to change to a vertical air spring that mounts inside and above
the column.
With the air spring installed, you can move the mill head up until the top of the casting is almost
flush with the top of the column. You can move it down until it almost contacts the adjustable Z-
axis stop set in its lowest position.
Besides all the parts required to mount the air spring, this kit also includes a longer Z-axis rack so
you can take advantage of the longer head motion.
This air spring has about 35 pounds of force. This is not enough to totally support the head, but it
is a heck of a lot more support than the torsion arm provides.

(800) 981 9663 LittleMachineShop.com Page 37


Kits: Conversion Kits
1928 Bed Extension Kit 14" $149.95
This kit turns your 7x0 or 7x2 lathe into a 7x4 lathe. It includes a bed casting, a lead screw, a
rack, a motor mount, a chip pan, 2 chip pan braces, several fasteners, and complete instructions.
The 7x4 bed is actually 6" longer than the 7x0 bed. It is 2" longer than the 7x2 bed.
This is NOT a bolt-together kit. You must drill and tap 9 holes in the new bed casting to match your
lathe. You need three metric taps: M3x0.5, M6x, and M8x.25. If you don't have metric drills, you
can use letter and number drills for tap drills. (The sizes are given in the instructions.)
1525 Bed Extension Kit 12" $119.95
1617 Tap & Tap Drill Kit $21.95

3488 Belt Drive Conversion Kit, Micro Mill $154.95


Ƚ No more broken drive gears
Ƚ Much quieter operation
Ƚ Spindle speed up to8000 RPM
Ƚ Ideal for manual and CNC mini mills
Ƚ Made by JD-CNC in the USA
NOTE: This item is Out of Stock until 20 we will update as soon as we have a firm ETA.

This JD-CNC kit provides an easy-to-install alternative to the noisy and fragile factory-installed
gears that drive the spindle on the micro mill.
This kit is CNC-machined from the highest quality materials. Designed to run full-time, it is built to
last.
Low speed range is 0-2000 RPM. Medium speed range is 0-4000 RPM. High speed range is 0-8000
RPM.
The installation is bolt-on and takes about 30 minutes.
3523 V-Belt for Micro Mill Belt Drive $8.95

2560 Belt Drive Conversion Kit, Mini Mill $129.95


Ƚ No more broken drive gears
Ƚ Much quieter operation
Ƚ Spindle speed up to 4300 RPM
Ƚ Ideal for manual and CNC mini mills
This kit provides an easy-to-install alternative to the noisy and fragile factory-installed gears that
drive the spindle on the mini mill.
This kit is CNC-machined from the highest quality materials. Designed to run full-time, it is built to
last. The kit includes one belt.
Change speeds without any tools. Simply remove the guard, loosen the lever locks and move the
belt from one pair of pulleys to the other. Low speed range is 0-700 RPM. High speed range is 0-
4300 RPM.
The installation is bolt-on and takes about 20 minutes.
This belt drive fits the following mills:

Grizzly G056 Lathe Mill Combo


Cummins 7877 Mini Mill
Grizzly G8689 Mini Milling Machine
Harbor Freight 4499 Central Machinery Mini Mill/Drill
Hare & Forbes HM-0 Mini Mill Drill
Homier 03947 Speedway Mini Mill
Micro-Mark 82573 MicroLux Milling Machine
2657 V-Belt for Mini Mill Belt Drive $4.95

2297 Extended Y-Axis Travel Kit, Micro Mill $105.95


This kit increases the Y-axis travel to 30 mm on the Harbor Freight 4758 micro mill.
The conversion kit includes a new base, saddle, Y-axis screw, the pivot components, and a bunch
of fasteners and small parts.

2296 Tilting Spindle, Y-axis travel Kit, Micro Mill $169.95

2642 Long Table Kit, Micro Mill $84.95


Ƚ Table is 400 mm x 45 mm
Ƚ X-Axis travel is 330 mm
Ƚ Provides 50 mm more X-axis travel
This kit adds a larger table, and increases the X-axis travel to 330 mm on the Harbor Freight 4758
micro mill.
The conversion kit includes a new table and 20 TPI X-axis screw.
3492 Long Table Kit, Micro Mill, Metric $89.95

(800) 981 9663 LittleMachineShop.com Page 38


Kits: Conversion Kits
2909 Metal Gear Kit for Mini Lathe & Mini Mill $71.60
Ƚ Replaces plastic spindle gears with metal gears
Ƚ Fits mini lathes and 3MT mini mills
Ƚ Includes installation tools
Once this kit is installed on your mini lathe or mini mill, you will no longer have to worry about
breaking the hard-to-replace gears on the spindle.

3446 Metal Gear Kit, Mini Lathe Complete $195.95


Ƚ Changes every plastic gear on the mini lathe to metal
Ƚ Metal change gear set
Ƚ Metal 2-speed transmission gears
Ƚ Metal lead screw drive gears
Ƚ Metal 80-tooth gears
This kit changes every plastic gear on a mini lathe to steel. You will never break a plastic gear
again.
3447 Change Gears Set, Metal $99.95
3493 Gear, 45 Teeth Metal $12.95
3450 Gear, 80 Teeth Metal $19.95
3455 Pinion, 20T Metal $9.95
3454 Pinion, 25T Metal $9.95

3448 Metal Transmission Gear Kit, Mini Lathe & 3MT Mini Mill $39.95
Ƚ Replaces both plastic transmission gears with metal
Ƚ Fits mini lathes and 3MT mini mills
Once this kit of steel gears is installed on your mini lathe or mini mill, you will no longer have to
worry about breaking the hard-to-replace gears inside the headstock.
On the mini lathe, the belt drive ensures that expensive parts don't break from overloads.
On the mini mill, the easy-to-replace intermediate gear on top of the headstock is still plastic.
This helps to ensure that you don't break expensive and hard to replace parts.
3451 Gear, 2-Speed Intermediate Shaft Metal $19.95
3453 Gear, 2-Speed Spindle Metal $22.95
3452 Gear, Intermediate Metal $11.95
3456 Gear, Spindle (2) Metal $15.95
3449 Metal Transmission Gear Kit, R8 Mini Mill $39.95

1690 Metric Threading Kit 12" $47.95


Metric threading kit for 7x2 mini lathes.
This kit replaces the lead screw, half nuts, and threading indicator so you can cut metric threads.

1691 Metric Threading Kit 10" $47.95


2026 Metric Threading Kit 14" $47.95

2383 Mini Lathe 20 TPI Feed Screw Parts $54.95


These parts change Grizzly, Harbor Freight, Homier, and Cummins mini lathes to 20 thread per
inch feed screws on the cross slide and compound rest.
Each rotation of the hand wheel will advance 0.050".

1764 Mini Mill 20 TPI Feed Screw Parts $57.75


These parts change Grizzly, Homier, Cummins, and Harbor Freight mini mills to 20 thread per inch
feed screws on the X- and Y-axis.
Each rotation of the hand wheel will advance the table 0.050".
The kit includes two feed screws, two nuts, two 50 division dials, plus the springs and keys that
you are going to lose during disassembly.
This kit includes the extended screw for the mini mill power feed.
1989 Mini Mill Metric Kit $59.95

(800) 981 9663 LittleMachineShop.com Page 39


Kits: Conversion Kits
2376 Mini Mill Power Feed Kit, No Feed Screw $159.95
Power table feed for the mini mill.
This power feed mounts on the left end of the mini mill's table and drives the X-axis feed screw. It
is variable speed (0 to 2 inches per minute).
The kit takes about 20 minutes to install.
This kit fits any mini mill with an extended X-axis feed screw. Look under the left side of the table
to see if the X-axis feed screw has a 2 /2" long unthreaded extension with a slot in the end. If so,
you can use this power feed kit.
1905 Mini Mill Power Feed Kit, 16 TPI $179.95
2501 Mini Mill Power Feed Kit, 20 TPI $179.95
3387 Mini Mill Power Feed Kit, No Feed Screw 230V $179.95

1815 Motor Controller Upgrade Kit $144.95


This kit upgrades the motor controller on Grizzly, Cummins, and Homier mini lathes. It also
upgrades Harbor Freight mini lathes with the big red "emergency" switch.
The motor controller in this kit is the standard speed control for the mini mill. It is designed for a
350 watt motor. The mini lathe has a 250 watt motor, so this provides some extra capacity.
This controller has built-in overload protection and an interlock that forces you to turn the speed
control to zero to start the motor.
This kit includes the motor controller and installation instructions, with wiring diagrams. It is a
"bolt on" upgrade for most 7x2 mini lathes. It might require some re-wiring or changing of
connectors for early Homier and early Cummins mini lathes that have two circuit boards.
This motor controller is model FC350BJ/0V. It is rated at 0-20V 50-60Hz.
1817 Motor Controller Upgrade Kit, Harbor Freight Rocker Switch $164.95

2592 Power Switch Upgrade Kit $4.95


Ƚ Heavy duty Cherry brand switch
Ƚ Five times the rated life of the standard switch
Ƚ Switch rated at 6 A at 20/250 VAC
Ƚ No soldering required to install
This is an upgrade kit for the illuminated power switch on Harbor Freight mini lathes.
The kit contains an upgraded switch, two crimp terminals, and a multi-stack quick disconnect. You
have to un-solder the old switch, but the crimp terminals eliminate soldering during installation.

1625 Spindle Conversion Kit, R8 $54.95


This kit converts a Grizzly or Micro-Mark mini mill to an R8 spindle.
The kit includes:
R8 spindle
Two spindle gears
Two spacing rings
Two keys
One bearing
One drawbar
Complete instructions
2823 Spindle Conversion Kit, 3MT $54.95

2352 Spindle Lock Kit $24.95


This spring loaded spindle lock is always where you need it and guarantees that you won't start
your mill with the spindle lock in place.
The kit includes all the parts you need to install a permanently mounted spindle lock on your mini
mill.

2287 Spindle Repair Tools $59.95


This kit contains the tools you need to service the spindle on a mini lathe and mini mill.
With these tools you can press the spindle and bearings out of the housing, press new bearings on
the spindle, and press the spindle back into the housing.
You must supply a 6" long /2" diameter threaded rod, two nuts, and two washers.

(800) 981 9663 LittleMachineShop.com Page 40


Kits: Conversion Kits
2892 Spindle, High Speed for Mini Mill $195.95
Ƚ 5,000-20,000 RPM
Ƚ Good for both manual and CNC operation
Ƚ Use small cutters at the appropriate cutting speeds
This is a simple and effective enhancement to the X2 mini mill that allows the attachment of a
Proxxon IB/E professional grinder for use as a high speed spindle. This product extends the
capabilities of the X2 by allowing small diameter cutters to be used at their recommended
rotational speed for maximum material removal and life.
Use this for fine engraving work, mechanical circuit board etching, jewelry wax machining, and
highly detailed wood carving.
This kit includes the Proxxon Professional grinder IB/E and the parts required to mount it as a
second high-speed spindle on your mini mill.

2018 Tailstock Cam Lock Kit $29.95


This kit converts a standard mini lathe tailstock to lock by lever action. This camlock action locks
the tailstock to the ways by moving a lever about 45 degrees.
You must drill one /2" hole in the back of the tailstock casting.
The cam lock kit is made from heat treated 440 steel for long life.

2634 Tweaks & Enhancements Kit™, Mini Lathe $19.95


Ƚ Several small items to make your lathe work better and last longer
Ƚ Easier gib and saddle retainer adjustment
Ƚ Fewer busted knuckles
Ƚ Quicker gear cover removal
Ƚ Fewer tailstock clamp jams
The Mini Lathe Tweaks & Enhancements Kit™ can make a big difference in the operation of your
mini lathe.
The kit includes the following:
Hardened lathe chuck mounting nuts for long life.
Self locking set screws for the cross slide and compound rest gibs
Self locking cap screws for the carriage retainers
Button-head cap screws for the cross slide and compound rest crank handles.
Thumbscrews for the change gear cover.
A spring for the tailstock clamp.
A rubber boot to protect the F/O/R switch on 7x0 and 7x2 mini lathes.
A rubber guard to prevent chips from getting into the motor speed control enclosure.
Complete instructions

2635 Tweaks & Enhancements Kit™, Mini Mill $29.95


Ƚ Several small items to make your mini mill work better and last longer
Ƚ Easier gib adjustment
Ƚ Fewer stripped locking levers
Ƚ Easier backlash adjustment
Ƚ Cleaner T-slots
The Mini Mill Tweaks & Enhancements Kit™ can make a big difference in the operation of your mini
mill.
The kit includes the following:
Improved (German-made) locking levers for the X-, Y-, and Z-axes.
Self locking set screws for the X-, Y-, and Z- axis gibs.
Self locking adjustment nuts for the X-, and Y-axes.
A T-slot cleaner
Complete instructions

Kits: Spare Parts Kits


2249 Spare Parts Kit (Micro Mill) $19.95
Ƚ 5 GMA-2 fuses
Ƚ 6 different gears
This kit contains the parts that fail most often on the micro mill with a 2 Morse taper spindle.

(800) 981 9663 LittleMachineShop.com Page 41


Kits: Spare Parts Kits
1223 Spare Parts Kit (Mini Lathe) $29.95
This kit contains the parts that fail most often on the mini lathe.
The kit contains:
5 GMA-5 fuses
 Gear, 2-Speed Intermediate Shaft
 Gear, 2-Speed Spindle
 Belt, Timing
 Pulley, Timing Belt Motor
 Pulley, Timing Belt Intermediate Shaft
 Gear, 80 Tooth
2262 Spare Parts Kit (7x14 Mini Lathe) $29.95

1703 Spare Parts Kit (R8 Mini Mill) $29.95


This kit contains the parts that fail most often on the mini mill with the R8 spindle.
The kit contains:
5 GMA-5 fuses
 Gear, Motor
 Gear, Intermediate
 Gear, Spindle ()
 Gear, Spindle (2)
 Gear, 2-Speed intermediate Shaft
1224 Spare Parts Kit (3MT Mini Mill) $24.95

Kits: Starter Kits


2653 Starter Kit, Micro Mill $78.95
Ƚ This kit contains the basics you need to start using your new micro mill
Ƚ 36-piece clamping kit for 5/6" (8 mm) T-slots
Ƚ Thin parallels (3" long)
Ƚ -2-3 blocks
Ƚ Edge and center finder

1261 Starter Kit, Mini Lathe (5/16" Tool Bits) $22.95


Ƚ This kit includes the basics you need to get started with your new mini lathe
Ƚ Five 5/6" M2 high speed steel tool bits
Ƚ 0-/2" drill chuck
Ƚ Drill chuck arbor 2MT short to 33JT
Ƚ Four center drills, sizes ,2,3, and 4
1796 Starter Kit, Lathe (3/8" Tool Bits) $25.95

1262 Starter Kit, Mini Mill $79.95


Ƚ This kit contains the basics you need to start using your new mini mill
Ƚ Clamping kit for 7/6" (2 mm) T-slots
Ƚ Thin parallels (6" long)
Ƚ -2-3 blocks
Ƚ Edge and center finder and T-slot cleaner

(800) 981 9663 LittleMachineShop.com Page 42


Kits: Starter Kits
3491 Tooling Package, 2MT Micro Mill $229.95
Ƚ Everything you need to use your 2MT M micro mill right now
Ƚ Workholding - precision milling vise, parallels, clamping kit, -2-3 blocks
Ƚ Toolholding - 2 Morse taper collet set
Ƚ Cutting tools - end mills and center drills
Ƚ More - edge finder, vise mounting blocks, drawbar
The high precision toolmakers screwless vise has a one-piece body. The body and jaws are
hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and
vertical vees on the inside face of the movable jaw to hold round objects.
The vise jaws are .38" deep and open to 3.95" capacity. The vise is 7.63" long x 2.88" wide.
The set of ten pairs of thin parallels come in a fitted case. They are /8" thick and 3" long. The
heights are /2", 5/8", 3/4", 7/8", ", -/8", -/4", -3/8", -/2", and -5/8". The parallels are
made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top
and bottom. The pairs are matched in height within 0.0004"
The 2 piece HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end
mills are /8" to /2" by 6ths. All the end mills have 3/8" shanks.
The set of seven 2 Morse taper round collets includes the sizes /8", 3/6", /4", 5/6", 3/8",
7/6", and /2". They are made of high grade tool steel, hardened and ground to close tolerance.
The drawbar thread is 3/8"-6. This set includes all the sizes required for common end mills.
The precision -2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are "
by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". The
set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-6
NC.
This package includes 5 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3, 4, and 5. These are
60 degree center drills.

3869 Tooling Package, 3501 CNC Mill $229.95


Ƚ Everything you need to use your 2MT M micro mill right now
Ƚ Workholding - precision milling vise, parallels, clamping kit, -2-3 blocks
Ƚ Toolholding - 2 Morse taper end mill holder set
Ƚ Cutting tools - end mills and center drills
Ƚ More - edge finder, vise mounting blocks
The high precision toolmakers screwless vise has a one-piece body. The body and jaws are
hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and
vertical vees on the inside face of the movable jaw to hold round objects.
The vise jaws are .38" deep and open to 3.95" capacity. The vise is 7.63" long x 2.88" wide.
The set of ten pairs of thin parallels come in a fitted case. They are /8" thick and 3" long. The
heights are /2", 5/8", 3/4", 7/8", ", -/8", -/4", -3/8", -/2", and -5/8". The parallels are
made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top
and bottom. The pairs are matched in height within 0.0004"
The 2 piece HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end
mills are /8" to /2" by 6ths. All the end mills have 3/8" shanks.
The set of four 2 Morse taper end mill holders includes the sizes 3/6", 3/8", /2", and 5/8". They
are made of high grade tool steel, hardened and ground to close tolerance. The drawbar thread is
3/8"-6. This set includes all the sizes required for common end mills.
The precision -2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are "
by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". The
set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-6
NC.
This package includes 5 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3, 4, and 5. These are
60 degree center drills.
This tooling package is perfect for KX CNC Mills.

(800) 981 9663 LittleMachineShop.com Page 43


Kits: Starter Kits
3486 Tooling Package, Mini Lathe $159.95
Ƚ Everything you need to get started with your mini lathe
Ƚ A2Z CNC Quick change tool post set
Ƚ /2" Capacity tailstock drill chuck and center drills
Ƚ Turning, boring and cut-off tools
This package contains all the tooling you need to be productive with your 7x0, 7x2 or 7x4 mini
lathe on the first day you own it.
The A2Z CNC quick change tool post set (QCTP) includes the tool post, mounting hardware, two
turning tool holders, a boring tool holder and a cut-off blade holder. The quick change tool post is
made from 606 T6 aluminum which is hard anodized for durability and appearance. No tools are
required to change tools. Additional tool holders are available.
The turning tool holders accept tools with /4" to /2" shank. The boring tool holder accepts
boring bars with up to 3/8" round shanks. The cut-off tool holder holds /2" tall parting blades.
The /2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This
chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 
mm (0.039") to 3 mm (0.52").
The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and
extra screws. It comes in a plastic case. The carbide inserts are TCMM-22.
The carbide tipped 9-piece boring bar set includes three different length boring bars each for
minimum bores of 5/6", 3/8", and 7/6". The bore depth ranges from 3/4" to 2-/4". The heat
treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The P parting blade is /6" x /2" x 4-/2" and made from M2 HSS. These T-shape parting blades
provide great side clearance.
This package includes 4 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3,and 4. These are 60
degree center drills. These are the sizes that are most used by bench top machinists.
3534 Tooling Package, 8x12, 8x14 Lathe $159.95
3514 Tooling Package, Atlas/Craftsman 6" Lathe $159.95

3489 Tooling Package, R8 Mini Mill $273.95


Ƚ Everything you need to use your R8 mini mill right now
Ƚ Workholding - 3" precision milling vise, parallels, clamping kit, -2-3 blocks
Ƚ Toolholding - R8 collet set
Ƚ Cutting tools - end mills and center drills
Ƚ More - edge finder, vise mounting kit, T-slot cleaner
The precision 3" Kurt-style milling machine vise has a detachable swivel base that features easy to
read divisions.
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.
The hardened and ground replaceable jaws on this vise are 3.5" wide, .04" deep, and open 3".
The vise is 0.85" long. Without the base, the vise is 3.05" high. With the base, the vise is 4.2"
high.
Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in
4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the
ways of the vise are parallel to the base of the vise within 0.0008" in 4". The replaceable jaws can
be mounted on either end of the fixed and movable jaw supports providing a wide range of
clamping distances.
The set of ten pairs of thin parallels come in a fitted case. They are /8" thick and 6" long. The
heights are /2", 5/8", 3/4", 7/8", ", -/8", -/4", -3/8", -/2", and -5/8". The parallels are
made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top
and bottom. The pairs are matched in height within 0.0004"
The 20 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center
cutting end mills are 3/6" to 3/4" by 6ths. The set comes in a fitted case.
The set of seven R8 round collets includes the sizes /8", 3/6", /4", 3/8", /2", 5/8", 3/4". They
are made of high grade tool steel, hardened and ground to close tolerance. This set includes all
the sizes required for common end mills.
The precision -2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are "
by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". The
set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-6
NC.
This package includes 5 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3, 4, and 5. These are
60 degree center drills.
3490 Tooling Package, 3MT Mini Mill $299.95

(800) 981 9663 LittleMachineShop.com Page 44


Kits: Starter Kits
3527 Tooling Package, Small Lathe $219.95
Ƚ Everything you need to get started with your small lathe
Ƚ AXA Quick change tool post set for lathes up to 2" swing
Ƚ /2" Capacity tailstock drill chuck and center drills
Ƚ Turning, boring and cut-off tools
This package contains all the tooling you need to be productive with your lathe on the first day
you own it.
The AXA (Series 00) quick change tool post set (QCTP) includes the tool post, mounting hardware,
a turning & facing tool holder, a boring, turning & facing tool holder, a heavy duty boring bar
holder, a universal parting blade holder, and a knurling, facing & turning tool holder. The quick
change tool post is made from hardened steel. No tools are required to change tools. Additional
tool holders are available. It requires some level of work, tapping a hole, or making a T-slot nut, to
mount this QCTP on your lathe.
The turning tool holders accept tools with 3/8" to /2" shank. The turning and boring tool holder
accepts boring bars with up to /2" round shanks. The cut-off tool holder holds /2" tall parting
blades.
The /2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of
the drill chuck is  mm (0.039") to 3 mm (0.52").
The set of /2" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a
wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMM-32.
The carbide tipped 9-piece boring bar set includes three different length boring bars each for
minimum bores of 5/6", 3/8", and 7/6". The bore depth ranges from 3/4" to 2-/4". The heat
treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The P parting blade is /6" x /2" x 4-/2" and made from M2 HSS. These T-shape parting blades
provide great side clearance.
This package includes 4 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3,and 4. These are 60
degree center drills. These are the sizes that are most used by bench top machinists.
3786 Tooling Package, 9x20 Lathe $224.95

3526 Tooling Package, X3 Mill $299.95


Ƚ Everything you need to use your X3 mill right now
Ƚ Workholding - 4" precision milling vise, parallels, clamping kit, -2-3 blocks
Ƚ Toolholding - R8 collet set
Ƚ Cutting tools - end mills and center drills
Ƚ More - edge finder, vise mounting kit, T-slot cleaner
The precision 4" Kurt-style milling machine vise has a detachable swivel base that features easy to
read divisions.
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.
The hardened and ground replaceable jaws on this vise are 4" wide, .8" deep, and open 4". The
vise is 3.4" long. Without the base, the vise is 3.46" high. With the base, the vise is 4.72" high.
Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in
4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the
ways of the vise are parallel to the base of the vise within 0.0008" in 4". The replaceable jaws can
be mounted on either end of the fixed and movable jaw supports providing a wide range of
clamping distances.
The set of ten pairs of thin parallels come in a fitted case. They are /8" thick and 6" long. The
heights are /2", 5/8", 3/4", 7/8", ", -/8", -/4", -3/8", -/2", and -5/8". The parallels are
made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top
and bottom. The pairs are matched in height within 0.0004"
The 20 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center
cutting end mills are 3/6" to 3/4" by 6ths. The set comes in a fitted case.
The set of seven R8 round collets includes the sizes /8", 3/6", /4", 3/8", /2", 5/8", 3/4". They
are made of high grade tool steel, hardened and ground to close tolerance. This set includes all
the sizes required for common end mills.
The precision -2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are "
by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002". The
set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-6
NC.
This package includes 5 different sizes of combined drills and countersinks, commonly called
center drills. The center drill set is high speed steel and includes sizes ,2,3, 4, and 5. These are
60 degree center drills.

(800) 981 9663 LittleMachineShop.com Page 45


Lathe: 10x21 Lathe (C6) Accessories
Lathe: 10x21 Lathe (C6) Accessories
3430 Tailstock LeverCam Lock Kit $19.95
Ƚ For SIEG C6 and Grizzly G056 lathe
Ƚ No lathe modifications required to install
The Tailstock LeverCam Lock Kit provides a cam lock for the tailstock of the SIEG C6 lathe. This
lathe is sold by Grizzly Industrial as the G056 Combo Lathe with Milling Attachment.

Lathe: 4x5 Micro Lathe (C0)/Unimat Accessories


2946 Auto longitudinal feed for SIEG C0 Lathes $29.95
Ƚ Powers the lead screw
Ƚ Clutch disengages when not in use
Ƚ Includes drive belt and mounting bolt
Ƚ Fits SIEG C0 lathes

2947 Compound Rest Assembly, Unimat 3 & 4, SIEG C0 Lathes $29.95


Ƚ Top slide for turning tapers
Ƚ 40 mm of travel
Ƚ Holds tools up to /4" shank
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes

2950 Faceplate, Unimat 3 & 4, SIEG C0 Lathes $9.95


Ƚ 70 mm diameter
Ƚ Three slots to mount work
Ƚ M4x.0 mounting thread
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes

2948 Live Center, Unimat 3 & 4, SIEG C0 Lathes $17.95


Ƚ 0 mm straight shank
Ƚ Point is a 60º included angle
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes

2945 Steady Rest, Unimat 4, SIEG C0 Lathes $19.95


Ƚ Supports work up to 40 mm (.5") in diameter
Ƚ Fits Unimat 4 lathes
Ƚ Fits SIEG C0 lathes

2952 Tool Post, Unimat 3 & 4, SIEG C0 Lathes $11.95


Ƚ Two sided tool post
Ƚ Holds tools up to /4" shank
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes
Ƚ Mounts with an M6 bolt included

2949 Wood Turning Tool Rest and Center, Unimat 3 & 4, SIEG C0 Lathes $31.95
Ƚ Wood turning tool rest and spur center
Ƚ 50 mm long tool rest
Ƚ Includes spur center with 0 mm shank
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes

(800) 981 9663 LittleMachineShop.com Page 46


Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories
Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories
1700 Boring Bar Holder, 1/2" $9.95
/2" Boring bar holder.
This simple boring bar holder fits in the standard 4-way tool post. It holds boring bars with /2"
shanks.

2977 Carriage Lock, Mini Lathe $35.95


Ƚ Locks carriage down to ways
Ƚ Won't rock the carriage when locking
Ƚ Mounts to existing follower rest mounting holes
Ƚ No tools required to lock the carriage
This carriage lock mounts to the two tapped holes for mounting the follower rest.
The carriage lock can be left in place for most operations.

2705 Carriage Stop, Adjustable $24.95


This carriage stop clamps to the ways of your lathe to provide a repeatable stop position. This is
useful when making multiple cutting passes or when making multiple parts.
This stop incorporates a fine adjustment. It is locked with a lever so you need no tools to use it.

1677 Compound Rest (Bottom) Drilled $28.95


This is the bottom half of the compound rest on the mini lathe.
This part has a second set of holes that moves the center of rotation of the compound rest to help
eliminate chatter.
Use the holes nearest the end of the part.
The thread pitch is  mm so the compound advances 0.040" (actually 0.0394") per revolution. Use
with a dial that has 40 divisions.
1880 Compound Rest (Bottom) Drilled 20 TPI $28.95

1777 Compound Rest (Bottom) Drilled and Milled $29.95


This is the bottom half of the compound rest on the mini lathe.
This part has a second set of holes that moves the center of rotation of the compound rest to help
eliminate chatter.
This part is also about /4" thinner than the standard part. This makes it possible to mount AXA or
Series 00 tool posts on the mini lathe.
Use the holes nearest the end of the part. Do not expect to use this without a quick change tool
post of some sort. It will place the standard tool post about /4" too low.
The thread pitch is  mm so the compound advances 0.040" (actually 0.0394") per revolution. Use
with a dial that has 40 divisions.
1881 Compound Rest (Bottom) Drilled and Milled 20 TPI $29.95

1551 Cut-Off Tool Holder $19.95


This cut-off, or parting, tool holder fits in the standard 4-way tool post (and most other tool posts)
and holds /2" tall cut-off blades.

3864 Cut-Off Tool Holder and HSS Blade $39.90

2314 Die Holder $32.95


Ƚ Holds 3/6" and " round dies
Ƚ Holds dies in alignment when threading on the lathe
Ƚ 2 Morse taper shank fits the mini lathe tailstock
Ƚ Tommy bar provides torque for larger thread sizes
This die holder goes in the tailstock of the mini lathe, or any other lathe with a 2 Morse taper
tailstock.
The arbor is made of steel. The body is aluminum for low mass, so it spins easily when you release
it. This prevents small parts from twisting off.

(800) 981 9663 LittleMachineShop.com Page 47


Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories
1873 Drawbar, 3MT x 3/8-16, Mini Lathe $3.49
This is the 3/8-6 drawbar for the 7x0 and 7x2 mini lathe with the 3 Morse Taper spindle.
This drawbar is a 3/8-6 x 5" cap screw and a flat washer. They are both hardened for long life.

2224 Drawbar, 3MT x 3/8-16, 7x14 Mini Lathe $4.29


1872 Drawbar, 3MT x M12, Mini Lathe $4.49

1199 Faceplate, Mini Lathe $19.95


The faceplate is 6.25" in diameter and has 8 slots for mounting work. The faceplate is made of cast
iron.

3401 Clamping Kit for C4 Faceplate $17.95


2644 Clamping Kit for Faceplate $13.95
2544 Faceplate, 8x12 Lathe $27.95
3400 Faceplate, C4 Lathe $27.95
2499 Faceplate, G0516 Combo Lathe Mill $27.95

2419 Follower Rest, Ball Bearing $54.95


Follower rest for the mini lathe.
This follower rest has been modified with the addition of ball bearings so it will reduce marking
of the workpiece.

1198 Follower Rest, Mini Lathe $26.95


This follower rest mounts on the lathe saddle and moves with the carriage.

2859 Follower Rest, 8x12, 8x14 Lathes $41.95


3399 Follower Rest, C4 Lathe $35.95
2497 Follower Rest, C6 Lathes $43.95

2459 Gear, 21 Teeth 3mm keyway $9.95


A 2 tooth change gear allows you to cut more accurate metric threads with a mini lathe.
These gears are made from metal for durability.
This gear fits most current production mini lathes. Measure the width of the keyway in your
change gears to be sure.

1149 Lathe Dog $4.95


Lathe dog for the mini lathe.
Use a lathe dog to drive the work when you are turning between centers.
This lathe dog has a capacity of just over 3/8".

3766 Milling Attachment Package, Mini Lathe $179.95


Ƚ Milling attachment that bolts on to the mini lathe
Ƚ Set of 6 two-flute end mills, /8" to /2" diameter
Ƚ 3/8" End mill holder and drawbar
The milling attachment replaces the compound rest on the mini lathe.
The vise opening is .9". The width of the vise is 2.6" and the depth is .4".
The travel is 3.6". The dial is graduated in 0.025 mm (approximately 0.00") and there are 60
divisions, so the advance is .5 mm (0.059") per revolution.
1681 Milling Attachment, Mini Lathe $154.95
2894 Milling Attachment, SIEG C6 Lathe $165.95

(800) 981 9663 LittleMachineShop.com Page 48


Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories
1956 Milling Attachment, Taig $62.95
The Taig milling attachment makes a good small milling attachment for the mini lathe.
You must make a mounting block that is about " tall to mount this milling attachment on the cross
slide.
The total vertical travel is .5" and the dial provides 0.00" increments. The vise width is 2". The
table is 2" x 3-3/4".
Overall the milling attachment is 2.25" wide, 3.38" deep, and 5.75" tall.

2935 Rotary Tool Mount $24.95


Ƚ Mounts the Proxxon IB/E Professional Rotary Tool on a mini lathe
Ƚ Replaces the tool post
This, and a Proxxon IB/E Professional Rotary Tool makes an internal/ external tool post grinder.
Maximum diameter for grinding is about /2".
This mount does not work with Dremel rotary tools.

2418 Steady Rest, Ball Bearing $66.95


The steady rest can support work up to " in diameter.
This steady rest has been modified with the addition of ball bearings so it will reduce marking of
the workpiece.

2889 Finger Assembly, Ball Bearing $11.95

1197 Steady Rest, Mini Lathe $29.95


The steady rest can support work up to " in diameter.

If this product is out of stock, you may want to try our part number 248 Steady Rest, Ball Bearing
as a substitute! It is the same Steady Rest just with the added ball bearing feature.
2858 Steady Rest, 8x12, 8x14 Lathes $51.95
3398 Steady Rest, C4 Lathe $53.95
2496 Steady Rest, C6 Lathes $53.95

1684 Tachometer, Spindle $77.95


This spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to
the nearest 20 RPM, of the spindle.
The spindle tachometer includes the interrupter wheel and the sensor and cable.

1946 Interrupter Wheel, 56 mm Diameter $5.95


2051 Interrupter Wheel, 66 mm Diameter $5.95
1945 Sensor and Cable $9.55

1204 Tool Post $14.35


Four-position tool post for the mini lathe.
This is the tool holder that comes on the mini lathe. On most mini lathes it is the correct size for
5/6" tools. On "early" Homier and Cummins lathes it is the correct size for 3/8" tools.
The tool holder is 2" square and .5" tall. The tool slot is 0.64" tall and is 0.32" from the bottom.
1589 Tool holder screws (8) $1.95

1685 Wood Turning Tool Rest and Center, Mini Lathe $35.95
The tool rest clamps in the standard tool post so you can turn wood on your mini lathe.
The driving center fits in the lathe spindle.

2498 Wood Turning Tool Rest and Center, C6 $41.95

Lathe: 7x10/12/14 Mini Lathe (C2/C3) Assemblies


1769 Compound Rest Assembly $72.95
This is a complete compound rest for the mini lathe.
It includes the tool post and locking handle not shown in the photo.

(800) 981 9663 LittleMachineShop.com Page 49


Lathe: 7x10/12/14 Mini Lathe (C2/C3) Assemblies
2299 Mini Lathe Headstock Assembly $119.95
This is the headstock assembly for a 7x0 or 7x2 mini lathe.
It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts
on the spindle, and all parts on the intermediate shaft, except the pulley.

3818 Tachometer, Spindle 3900 & 4100 $119.95


Ƚ Plugs into control panel
Ƚ Mounts magnetically
This spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to
the nearest 20 RPM, of the spindle.
The spindle tachometer plugs into the jack on the control panel.

1884 Tailstock Assembly $71.95


This is a kit of all the parts required to make a complete tailstock for the mini lathe.
The center height of this tailstock is approximately 90 mm.

2502 Tailstock Assembly, Cam Lock $86.75


This is the tailstock from the Micro-Mark 7x4 mini lathe. It has a factory-installed cam lock
mechanism.

1526 Threading Dial Assembly (Inch) $19.95


This kit includes all the parts needed to add a threading dial for cutting inch threads to a mini
lathe.
This assembly DOES NOT help you to cut inch threads on a metric lathe with a metric lead screw.

2545 Threading Dial Assembly (inch), G0516 $28.95

Lathe: 9x20 Lathe Accessories


3027 Four Bolt Compound Hold Down for 9x20 Lathe $44.95
Ƚ Precision machined from steel
Ƚ Fits most 9x20 lathes
Ƚ Black oxide finish
Eliminate the flex of your stock 2-bolt compound rest hold down with our precision machined 4-
bolt upgrade. Replaces the current mount and is a direct bolt on upgrade. No mounting hardware
is included.
3108 Tuff Nuts T-Slot Nuts for 9x20 (4 pieces) $8.00

(800) 981 9663 LittleMachineShop.com Page 50


Lathe: Tool Post Grinders
Lathe: Tool Post Grinders
1275 Tool Post Grinder $239.95
This grinding and drilling attachment is designed for a 9x20 lathe, but can be adapted to work on
the mini lathe.
One end of the spindle has a grinding wheel and the other can mount a chuck for drilling.
Grinding Speed: 0-7,000 RPM
Drilling Speed: 0-3500 RPM
Motor: 250 Watts
Drilling: /4"
Grinding wheel: 80 mm dia x 20 mm hole x 0 mm wide.
The tool post grinder is approximately 2" from the front of the wheel to the back of the motor,
" wide, and 4" thick.
2196 Belt, Multi-V $10.75
3191 Diamond Single Point Grinding Wheel Dresser $14.95
2584 Grinding Wheel, 120 Grit $11.95
2585 Grinding Wheel, 180 Grit $11.95
2586 Grinding Wheel, 240 Grit $11.95
2184 Grinding Wheel, 60 Grit $11.95
1767 Grinding Wheel, 80 Grit $11.95
2722 Tool Post Grinder (220VAC) $199.95

2001 Tool Post Grinder $114.95


This tool post grinder is designed specifically for the mini lathe. To install it, you simply replace
the compound rest.
The bottom of the mounting foot is approximately 50 mm (2") below the centerline of the grinding
wheel.
The wheel turns at 6000 RPM.
The grinder comes with 2 different grit grinding wheels (60 and 80 grit), and the tools needed to
change them.
Motor 50 watts, 20V, 60 Hz.
The tool post grinder is approximately 8" tall, 9" long and 3.5" thick.
2195 Arbor, Grinding Wheel $7.15
2194 Belt, Multi-V $3.95
2724 Tool Post Grinder (220VAC) $119.95

Lathe: Tooling
2568 Ball and Radius Turning Tool, Large, OMW $139.95
The OMW Large Radius Ball Tool like its smaller counterpart is designed to cut round shapes or
curves in brass, aluminum, steel, wood or plastic on your own lathe.
Balls in the ends of rods, shafts, or handles are easily turned with the tool. You can also make ball
joints, governor weights, railing knobs, round contact points for tools, nose cones, and many other
useful and decorative objects. The OMW Radius tool is sized for lathes of 5" or greater swing, and
the ½" shank size will fit most standard tool holders. The tool will cut convex curves up to ¾" in
diameter.
The tool is manufactured from the highest quality materials. Frames are machined from high
strength aluminum alloy. The handle is tool steel, the pivot pins are hardened and ground and
rotate in custom bronze bearings. The tool is completely machined from solid metal stock, there
are no stamped, cast or pressed parts. A pre-ground High Speed steel tool bit is included. Each tool
is manufactured in the USA by OMW Corporation and is carefully inspected and checked before
shipment.
The tool is designed so that the center height is 3/8" from the bottom of the shank. The tool
comes with a pre-ground HSS tool bit which may be easily resharpened or modified.
2569 Ball and Radius Turning Tool, Small, OMW $89.95
2963 Tool Bit, Large Ball and Radius Turning Tool $19.95
2964 Tool Bit, Small Ball and Radius Turning Tool $16.95

1970 Ball Turning Attachment $47.95


This attachment allows you to turn balls on the mini lathe.
The tool will cut convex curves up to 2" in diameter.
Includes one presharpened tool bit.
You must make a mounting block for the ball turning attachment.

(800) 981 9663 LittleMachineShop.com Page 51


Lathe: Tooling
1188 Dead Center, 3MT $7.15
3 Morse taper solid dead center.
This center fits the headstock of the mini lathe. The center has a 60 degree included point angle.

1890 Dead Center, 2MT $5.95

1911 Knurler, Large Capacity $39.95


Ƚ 0 to 2" diameter capacity
Ƚ Fits standard 4-way and quick change tool posts
Ƚ Includes three sets of knurls
This scissors knurler is made to our design, specifically for the mini lathe.
This knurler fits in the standard tool post of the mini lathe without any modification. It also works
with any of the quick change tool posts we sell.
The mounting bar is 3/8" tall so it replaces a 3/8" tool bit.
It comes with fine (33 lines per inch), medium (2 lines per inch), and coarse (4 lines per inch)
diamond knurls.
3770 Knurler, Large Capacity with 6 sets of knurls $54.95

1189 Live Center, 2MT Short $15.55


Ƚ Point is a 60º included angle
Ƚ Short 2 Morse taper for the mini lathe
Ƚ Fits Jet 04 mini wood lathe
This center fits the tailstock of the mini lathe.
The point is a 60º included angle.

2871 Live Center, 2MT Standard $29.95


This live center has a standard length 2 Morse taper arbor and will eject from most lathes with a
2MT tailstock taper.
The point is a 60º included angle.

3515 Live Center, 1MT $19.95

3154 Live Center, 2MT Standard Bull Nose $69.95


Ƚ For tubing and other hollow work
This bull nose live center is made from hardened steel and ground for accuracy. It has precision
high quality bearings. The nose is a 70º included angle.
The diameter of the nose is 2.49". The diameter of the flat on the front of the nose is 0.46".

1592 Live Center, 2MT Standard Heavy Duty $23.95


This center is made from hardened steel and ground for accuracy. It has precision high quality
bearings. The point is a 60º included angle.
The maximum diameter of the point is 0.98". The OD of the body is .77". The distance from the
tip to the front of the body is .66".
The rated radial load is 90 lbs. The maximum speed is 5000 RPM.
2714 Live Center, 0MT Heavy Duty $19.95
1704 Live Center, 1MT Heavy Duty $19.95
3702 Live Center, 3MT $27.95

2504 Rotating Tailstock Chuck $39.95


This is a "live" drill chuck for the tailstock.
Use it to support small diameter work where a live center is not practical.
The shank is 2 Morse taper. The drill chuck is /2" capacity.

(800) 981 9663 LittleMachineShop.com Page 52


Lathe: Tooling
2658 Tachulator Tachometer & SFM Meter $99.95
Ƚ Digital tachometer for lathes and mills
Ƚ Displays RPM and Surface Feet per Minute
Ƚ Range to 9999 RPM, 9999 SFM
Ƚ Accuracy and Resolution to  RPM
Ƚ Cutter or work diameter to 99.99"
This kit includes the Tachulator module in an aluminum enclosure, plus the sensor and power
supply.
Features include:
Period counting for fast updates even at slow RPM inputs
Calculates SFM from RPM and entered diameter
Cutter or work diameter from 0.0” to 99.99”
Low power consumption- 50mA typically at 9-2VDC
Bright attractive 4 digit 0.56” high display with decimal points
Sensor contains light source- will work in complete darkness
Crystal time base for high accuracy and stability
Professional quality conservative design and manufacturing
Screw terminal block for sensor connection
Usable with multiple sensor heads using a DPDT or 2-pole multiple-position switch
2825 Sensor and Cable, Tachulator $7.95

1877 Tailstock Turret Tool Holder, 2MT $69.95


This tailstock turret tool holder has positions for 6 tools.
The tool positions are 5/8" diameter holes with a set screw to retain the tool holder. The shank is
a 2 Morse taper.

3053 Tailstock Turret Tool Holder, 3MT $79.95

Lathe Chucks: Accessories


1768 Chuck Key for 3" 3-Jaw Chuck $8.35
This chuck key fits our 3-Jaw 3" chuck, PN 87. This is the chuck that comes on the mini lathe.
This key will also fit any other chuck that requires a 5/6" key.

1975 Chuck Key for 4" 3-Jaw Chuck $9.55


3409 Chuck Key for 4" 4-Jaw Chuck $9.55

1688 Jaws, Inside for 3" 3-Jaw Chuck $28.95


Inside jaws for 3" 3-jaw chuck.
These are replacement jaws for the 3" 3-jaw chuck that comes on the mini lathe.
Look carefully at the jaws before you decide to purchase inside or outside jaws.

3408 Jaws, 4" 4-Jaw Chuck $35.95


1973 Jaws, Inside for 4" 3-Jaw Chuck $35.95
1689 Jaws, Outside for 3" 3-Jaw Chuck $28.95
1974 Jaws, Outside for 4" 3-Jaw Chuck $35.95

Lathe Chucks: Adapters


1692 Adapter, 4" Lathe Chuck $19.95
This adapter lets you mount 4" 3- or 4-jaw lathe chucks on your mini lathe.
The adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three
holes.
This adapter is cast iron and has a net thickness of 0.66". The net thickness is the distance from
the rim of the lathe spindle to the back of the chuck.
2426 Adapter, 4" Self-centering Lathe Chuck $19.95

2358 Adapter, 5" Lathe Chuck $28.95


This adapter lets you mount 5" 3-jaw lathe chucks on your mini lathe in place of a 3" (80 mm)
chuck.
The adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three
holes.
This adapter has a 92 mm diameter registration boss, and has 3 chuck mounting holes.
2347 Adapter, 5" Lathe Chuck $28.95

(800) 981 9663 LittleMachineShop.com Page 53


Lathe Chucks: Adapters
2961 Adapter, 5" Lathe Chuck $28.95
This adapter mounts a 5" 3- or 4-jaw lathe chuck with a 95 mm registration recess on a flange for a
4" chuck with a 72 mm registration boss. It works on 8x2 and 8x4 lathes as well as the Harbor
Freight 5980 multipurpose machine. It also fits the SIEG C4 lathe.

Lathe Chuck Adapters


We stock a wide range of cast iron threaded lathe chuck adapters. These adapters are used to
mount flat back lathe chucks on lathes with threaded spindles.

1792 Chuck Adapter, 1 1/2"-8 Thread 4" Dia $18.00


1918 Chuck Adapter, 1 1/2"-8 Thread 4" Dia 3 Holes $18.00
1919 Chuck Adapter, 1 1/2"-8 Thread 6" Dia $30.00
1917 Chuck Adapter, 1"-10 Thread 4" Dia 3 Holes $18.00
1791 Chuck Adapter, 1"-10 Thread 4" Dia. $18.00
2333 Chuck Adapter, 1"-10 Thread 5" Dia. $30.00
2334 Chuck Adapter, 1"-10 Thread 6" Dia. $30.00
1916 Chuck Adapter, 1"-8 Thread 4" Dia 3 Holes $18.00
1790 Chuck Adapter, 1"-8 Thread 4" Dia. $18.00
2331 Chuck Adapter, 1"-8 Thread 5" Dia. $30.00
2332 Chuck Adapter, 1"-8 Thread 6" Dia. $30.00
2022 Chuck Adapter, 1/2"-20 Thread 3" Dia 3 Holes $18.00
1923 Chuck Adapter, 2 1/4" - 8 Thread 6" Dia $30.00
1920 Chuck Adapter, 3/4"-16 Thread 3" Dia 6 Holes $20.00
1921 Chuck Adapter, M39 x 4 Thread 4" Dia $18.00
1922 Chuck Adapter, M39 x 4 Thread 6" Dia $30.00
2335 Chuck Adapter, Unthreaded 4" Dia. $18.00
2336 Chuck Adapter, Unthreaded 6" Dia $30.00

Lathe Chucks: Chucks


Lathe Chuck Capacities
See the lathe chuck capacity chart at the back of this catalog.

1187 Lathe Chuck, 3-Jaw 3" $74.95


Ƚ 3-Jaw self-centering lathe chuck.
Ƚ 3" (80 mm) diameter
Ƚ Includes chuck key, inside and outside jaws
Ƚ Plain back mounting
This 3 inch 3-Jaw self-centering lathe chuck is the one that comes on the mini lathe. It includes a
chuck key, inside and outside jaws, and mounting bolts.
This chuck has a 0.63" (6 mm) through hole. It holds work up to 2.48" (63 mm) in diameter.
The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003"
maximum.
2916 Lathe Chuck, 3-Jaw 2" $53.95
1698 Lathe Chuck, 3-Jaw 4" $79.95
2337 Lathe Chuck, 3-Jaw 5" $89.95
2028 Lathe Chuck, 3-Jaw 6" $109.95
2917 Lathe Chuck, 4-Jaw 2" $59.95

(800) 981 9663 LittleMachineShop.com Page 54


Lathe Chucks: Chucks
1941 Lathe Chuck, 3-Jaw 4" with Adapter $94.95
Ƚ 3-jaw self centering lathe chuck
Ƚ 4" (00 mm) diameter
Ƚ Includes chuck key, inside and outside jaws
Ƚ Includes an adapter to mount on a 3" (80 mm) flange
This chuck comes with an adapter for the mini lathe so that you can bolt it on.
This chuck has a 0.87" (22 mm) through hole. The chuck can hold work up to 3.5" (80 mm) in
diameter.
The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003"
maximum.
2345 Lathe Chuck, 3-Jaw 5" with Adapter $104.95

1175 Lathe Chuck, 4-Jaw 3" $59.95


Ƚ 4-Jaw Lathe Chuck
Ƚ 3" (80 mm) diameter
Ƚ Each jaw is independently adjustable and reversible
Ƚ Plain back mounting
This set includes the 3 inch 4-jaw chuck, a chuck key, and reversible jaws.
This chuck has a 0.87" (22 mm) through hole. It holds work up to 3.5" (80 mm) in diameter.
1588 Lathe Chuck, 4-Jaw 4" $79.95
2338 Lathe Chuck, 4-Jaw 5" $89.95
2038 Lathe Chuck, 4-Jaw 6" $99.95

2361 Lathe Chuck, 4-Jaw 4" Self-Centering $119.95


Ƚ 4-jaw self-centering lathe chuck
Ƚ 4" (00 mm) diameter
Ƚ Plain back mounting
4 inch, 4-Jaw self-centering lathe chuck for square or octagonal work.
The through bore of this chuck is 20 mm (0.79").
The chuck can hold work up to 80 mm (3.5") in diameter.
The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.004"
maximum.
3424 Lathe Chuck, 4-Jaw 3" Self-Centering $84.95

1697 Lathe Chuck, 4-Jaw 4" with Adapter $89.95


Ƚ 4-jaw lathe chuck
Ƚ 4" (00 mm) diameter
Ƚ Each jaw is independently adjustable and reversible
Ƚ Includes an adapter to mount on a 3" (80 mm) flange
This 4 inch 4-Jaw independent chuck includes an adapter to fit the mini lathe spindle. It includes a
chuck key and reversible jaws.
The adapter mounts to the spindle with three studs so additional holes in the spindle are not
required.
This chuck has a 0.98" (25 mm) through hole. The chuck can hold work up to 3.94" (00 mm) in
diameter.
2346 Lathe Chuck, 4-Jaw 5" with Adapter $99.95

2276 Lathe Chuck, 6-Jaw 4" $132.95


Ƚ 6-jaw self centering lathe chuck
Ƚ 4" (00 mm) diameter
Ƚ Includes chuck key and mounting bolts
Ƚ Plain back mounting
Ƚ Excellent for holding thin walled workpieces
The jaws on this 4 inch 6-Jaw self-centering lathe chuck are hardened and ground.
Includes chuck key and mounting bolts.
Because the chuck is designed to hold tubing, outside jaws are not included.
This chuck has a .02" (26 mm) through hole. The chuck can hold work up to 3.5" (80 mm) in
diameter.
The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003"
maximum.

(800) 981 9663 LittleMachineShop.com Page 55


Machines: Mini Lathes
Machines: Mini Lathes
4100 HiTorque 7x12 Mini Lathe $639.95
Ƚ Most powerful lathe in its class
Ƚ Most low-speed torque in its class
Ƚ No gears in spindle drive
Ƚ Cam lock tailstock
The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power,
most torque, and a longer center distance than other lathes in its class.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary
the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.
The cross feed and compound rest dials are graduated in 0.00" and 0.025 mm. The lathe is
equipped with a 4-way indexing tool post set for 5/5" (8 mm) tools.
Real top and bottom half-nuts and a reversible 6 TPI lead screw provide extended threading
capability. You can create every American Standard Unified class 2A inch screw thread from 4 to
80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3
to 8 mm pitch with the extra 2 tooth change gear that is included.
The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.
The LitleMachineShop.com model 400 HiTorque Mini Lathe is a version of the SIEG SC2.

Machines: Mini Mills


3900 HiTorque Mini Mill $649.95
Ƚ Most powerful mill in its class
Ƚ Most low-speed torque in its class
Ƚ No gears in spindle drive
Ƚ Largest table and X-Y travel in its class
Ƚ R8 spindle
The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most
torque, and a larger table than other mills in its class.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary
the speed from 50 RPM to 2500 RPM continuously. There are no gears to shift. And, with no gears,
the HiTorque Mini Mill is the quietest in its class.
The large mill table provides 50% more table area than other mini mills. It also has 30% more travel
in each direction. The resettable feed dials allow you to zero them at any point.
The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also
has Z-axis fine feed with 0.00" resolution for milling operations.

Mill: Micro Mill (X1) Accessories


2034 Drawbar, 2MT x 3/8-16, Micro Mill $11.95
This drawbar is for the micro mill. It has a 3/8"-6 drawbar thread.

3105 Tooling Plate for Micro Mills $86.50


Ƚ Made from cast aluminum tooling plate /2" thick
Ƚ Plate is 5.7" x 5.75"
Ƚ Holes tapped 3/8"-6 on .625" centers
Ƚ Includes mounting bolts
Ƚ Designed to fit the micro mill with the extended table
Also has holes to fit a Sherline 370rotary fixture and has a T-slot for a Sherline 3702 90-degree
tailstock.

Mill: Mini Mill (X2) Accessories


1637 Drawbar, 3MT x 3/8-16, Mini Mill $9.95
This drawbar fits the Grizzly G8689 and the Micro-Mark 82573 mini mills with the 3 Morse taper
spindle, and is for use with collets and end mill holders with 3/8-6 NC thread.
These drawbars are custom made for LittleMachineShop.com.

1414 Drawbar, 3MT x M12, Mini Mill $11.95


1638 Drawbar, R8 1-Piece, Mini Mill $9.95

(800) 981 9663 LittleMachineShop.com Page 56


Mill: Mini Mill (X2) Accessories
3620 Stub Milling Machine Arbor, 3/4" Straight Shank $59.95
Ƚ " diameter arbor with spacer rings and left-hand nut
Ƚ 3/4" straight shank fits in collets or end mill holders
Ƚ Fits " ID slitting saws and milling cutters

2708 Tooling Plate for Mini Mills $86.50


Ƚ Made from cast aluminum tooling plate 3/4" thick
Ƚ Plate is 4" x 3"
Ƚ Holes tapped 3/8"-6 on .625" centers
Ƚ Includes mounting bolts
Ƚ Designed to fit the Mini Mill
Cast aluminum tooling plate with 3/8-6 tapped holes and mounting bolts. Also has holes to fit a
Sherline 370 rotary fixture and has a T-slot for a Sherline 3702 90-degree tailstock.

3106 T-Slot Cleaner $4.25


Ƚ Laser machined from Delrin specifically for the Mini Mill
Use this T-slot cleaner to clear the swarf from the T-slots on your mini mill.

3107 Tuff Nuts T-Slot Nuts for Mini Mill (8 pieces) $16.00
Ƚ 0-32 thread
Ƚ Set of 8 T-slot nuts
Ƚ Fits 2 mm T-slot on Mini Mill
Ƚ Steel T-nut with black oxide finish
Ƚ Lifetime Warranty

Mill: Mini Mill (X2) Assemblies


1766 Mini Mill Column Assembly $94.95
This is the complete column assembly for the mini mill.

1663 Mini Mill Head Assembly R8 Spindle $298.95


This is the complete head assembly for the mini mill. It includes the motor, motor controls,
spindle housing and spindle. In short, it includes everything that travels up and down the column.
This mini mill head assembly has an R8 spindle.
The motor controller is a PWM variable speed controller with overload protection and a zero-speed
start interlock.
Motor: 350 Watt (0.47 HP)
Low speed: 0-00 RPM
High speed: 0-2500 RPM
Drilling capacity: /2"
End milling capacity: 5/8"
Face milling capacity: -/8"
Power: 20V, 60 Hz
1912 Mini Mill Head Assembly 3MT Spindle $298.95
2636 Mini Mill Head Assembly 3MT Spindle (220VAC) $298.95
2517 Mini Mill Head Assembly R8 Spindle (220VAC) $298.95

(800) 981 9663 LittleMachineShop.com Page 57


Mill: Mini Mill (X2) Assemblies
3677 Mini Mill Large Table Assembly $299.95
Ƚ 30% more travel in both directions
Ƚ 50% more table area
Ƚ Unbolt the column from your existing X-Y table and bolt it to this one.
Ƚ Great for the Grizzly G056
This is a complete X-Y table assembly for a mini mill.
The table is 20 mm (4.73") by 460 mm (8."). It has three 2 mm T-slots.
The X-axis travel is 300 mm (.8") and the Y-axis travel is 30 mm (5.").
The dials are graduated in 0.00" and one turn of the hand wheels moves the table 0.050".
The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.
This is all you need to make a mini mill using the milling column from a Grizzly G056 Combo
Lathe with Milling Attachment.

1944 Mini Mill Spindle Box Assembly R8 $119.95


This is the spindle box casting for the mini mill, along with all the internal parts. Included are:
An R8 spindle with all the gears, bearings, spacers, and top nut that ride on it.
The intermediate shaft with all the gears, bearings and such that ride on it. This includes the
intermediate gear on the top of the shaft.
The high/low speed shifting mechanism.
1906 Mini Mill Spindle Box Assembly 3MT $119.95

1765 Mini Mill Table Assembly $199.95


This is the complete X-Y table assembly for a mini mill.
The table is 90 mm (3.54") by 335 mm (3.9"). It has three 2 mm T-slots.
The X-axis travel is approximately 8" and the Y-axis travel is approximately 4". The table is 36 mm
(5.3") tall (the hand wheel and rear mount are higher). The table is 390 mm (5.4") deep and 460
mm (8.") wide.
The dials are graduated in 0.00" and one turn of the hand wheels moves the table 0.0625".
The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.
This is all you need to make a mini mill using the milling column from a Grizzly G056 Combo
Lathe with Milling Attachment.

Mill: Quick Change Tooling


About the Tormach Tooling System
Tool switching with the Tormach Tooling System (TTS) is extremely easy: Simply loosen the
drawbar, slide out the current tool holder, then slip in the next and retighten. The unique
geometry of the TTS tool holder ensures that, as the drawbar is tightened, the tool holder moves
into an exact Z height while increasing rigidity.
Each TTS holder has a shoulder that is undercut so it contacts the spindle itself, not the end of the
collet. As the drawbar is tightened the collet will simultaneously squeeze the shank and be pulled
upward into the spindle taper. This simultaneous action, grasping while moving up, pulls the tool
holder tightly against the spindle face. The high-pressure contact between the shoulder of the tool
holder and the spindle is the equivalent of a zero tolerance fit; the vertical location (Z-height) of
the tool is exact. The initial placement, created by simply sliding the tool holder up until it stops,
is normally within a few thousandths of an inch. The final location, after tightening the collet, is
exact, highly repeatable, and not affected by the variable tension of the drawbar or wear on the
collet.
3099 Tool Conversion Kit, Tormach Quick Change $8.95

2436 Arbor, Drill Chuck, Tormach Quick Change to 33JT $15.80


Ƚ Quick change arbor for /2" drill chucks
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ Hardened and precision ground
3586 Arbor, Drill Chuck, Tormach Quick Change to JT1 $15.80
2453 Arbor, Drill Chuck, Tormach Quick Change to JT2 $15.80

2456 Boring Head Shank, Tormach Quick Change $37.50


Ƚ Quick change boring head shank with 7/8-20 thread
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ Hardened and precision ground

(800) 981 9663 LittleMachineShop.com Page 58


Mill: Quick Change Tooling
2435 Collet Holder, ER-20 Tormach Quick Change $92.00
Ƚ Quick change adapter for ER-20 collets
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ Hardened and precision ground
2442 Collet Set, ER-20 Set of 3 $28.50
2439 Wrench Set, Tormach Quick Change $13.66

2454 Collet, 3/4" R8 for Tormach Quick Change $19.50


Ƚ Special shortened R8 collet for TTS system
Ƚ Precision ground
This precision ground R8 collet is shorter than a normal R8 collet to ensure that the TTS tool
holder contacts the spindle.
2455 Collet, 3/4" 3MT for Tormach Quick Change $20.50

3588 Drill Chuck, 1/4" Tormach Quick Change $37.55


Ƚ 0-/4" Capacity drill chuck
Ƚ Mounted on Tormach Tooling System Arbor
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ Hardened and precision ground
0-/4" Capacity drill chuck and Tormach Tooling System Arbor.
All working parts are hardened. Chuck key is included. Number  Jacobs taper mount.

2434 End Mill Holder, 3/8" Tormach Quick Change $23.50


Ƚ Quick change adapter for 3/8" shank end mills
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ Hardened and precision ground
2698 Blank Tool Holder, Tormach Quick Change $16.50
2438 End Mill Holder, 1/2" Tormach Quick Change $23.50
3026 End Mill Holder, 1/4" Tormach Quick Change $34.50
3025 End Mill Holder, 5/16" Tormach Quick Change $23.50

2440 Starter Set, CNC, Tormach Quick Change $745.00


Ƚ Complete set for CNC operations includes 5 tool holders
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ All tool holders are hardened and precision ground
Ƚ Tool height presetting set included
CNC operations work best with one holder for each tool in order to make use of the tool length
compensation table in the CNC controller. This function also requires an off-line system for
measuring the mounted tools. The CNC set includes a total of 5 tool holders plus a tool measuring
set. This is an outstanding value and a great way to get started with a CNC that has been
retrofitted from a manual machine. If your CNC machine supports a tool offset table but you’re not
using it, then you’re not realizing the full benefit of CNC machining.
Each set contains:
2 each /4" Set Screw Tool Holders
2 each 3/8" Set Screw Tool Holders
4 each /2" Set Screw Tool Holders
3 ER20 Collet Holders
9 of the most popular ER20 collets
4 drill chucks and JT adaptors
8” Dial Height Gauge
Compact Granite Surface Plate
TTS Height Measurement Fixture
Precision TTS-R8 collet
Various wrenches, heavy cut adaptor, and instructions

(800) 981 9663 LittleMachineShop.com Page 59


Mill: Quick Change Tooling
2441 Starter Set, Manual, Tormach Quick Change $239.00
Ƚ Complete set for manual operations includes 4 tool holders
Ƚ Minimal clearance height for tool change
Ƚ Repeatable tool positioning
Ƚ All tool holders are hardened and precision ground
Manual operations benefit from quick change, reduced clearance, and increased rigidity. Manual
mill users generally don’t need to measure tool height off-line nor will they use one tool holder
per tool. The set has 4 tool holders.
Each set contains:
 each /2” Set Screw Adaptor
 each 3/8” Set Screw Adaptor
 each ER20 Collet Holder
3 each ER20 Collets (/8”, /4”, and 3/8”)
 each JT Adaptor and /4" Drill Chuck
 each Precision TTS-R8 collet
Various wrenches, heavy cut adaptor, and instructions

2437 Tool Height Setting Fixture, Tormach Quick Change $27.85


Ƚ Tool height setting fixture for Tormach Tooling System
Ƚ Set tool height accurately
Ƚ Hardened and precision ground
The ability to measure tool height off-line greatly improves the machinist’s efficiency. Whether
replacing a broken tool in the middle of a process, using the tool compensation table of a CNC
controller, or just switching tools in a manual process, off-line tool measurement is a great aid to
the machinist.
The design of Tormach Tooling System (TTS) allows a quick and accurate measurement with a
height gauge. By comparison, the vertical position of R8 and most other taper systems is controlled
at the taper. Any taper tool holder requires a specialized taper adapter for off-line tool
measurement

Mill: Sherline/Taig Mill Accessories


3121 Boring Head Shank for Sherline $18.95
This boring head shank has 7/8-20 thread on the outside and 3/4-6 thread on the inside. This
allows you to mount a standard boring head on a Sherline mill.
The short length minimizes the tool string length to allow more working clearance.

2462 Boring Head Shank for Taig $18.95


3122 Boring Head Shank for Taig with ER-16 Spindle $20.95

2472 End Mill Holder, 3/8" Sherline $21.00


Ƚ Adapter for 3/8" shank end mills
Ƚ 7/8" hex for easy removal from spindle
Ƚ Precision CNC machined in a single setup for maximum accuracy
Ƚ Made from black oxide finished steel
Ƚ Perfect for CNC; allows tool length compensation.
This 3/8" end mill holder screws onto the 3/4"-6 threaded spindle on Sherline mills.
Made by A2Z CNC.
2471 End Mill Holder, 1/2" Sherline $21.00
2474 End Mill Holder, 1/4" Sherline $21.00
2476 End Mill Holder, 1/8" Sherline $21.00
2475 End Mill Holder, 3/16" Sherline $21.00
2473 End Mill Holder, 5/16" Sherline $21.00

(800) 981 9663 LittleMachineShop.com Page 60


Mill: Sherline/Taig Mill Accessories
2466 End Mill Holder, 3/8" Taig $21.00
Ƚ Adapter for 3/8" shank end mills
Ƚ 7/8" hex for easy removal from spindle
Ƚ Precision CNC machined in a single setup for maximum accuracy
Ƚ Made from black oxide finished steel
Ƚ Perfect for CNC; allows tool length compensation.
This 3/8" end mill holder screws onto the 3/4"-6 threaded spindle on Taig mills.
Made by A2Z CNC.
2449 End Mill Holder, 1/2" Taig $21.00
2468 End Mill Holder, 1/4" Taig $21.00
2470 End Mill Holder, 1/8" Taig $21.00
2469 End Mill Holder, 3/16" Taig $21.00
2467 End Mill Holder, 5/16" Taig $21.00

Mill: Small Mill (X3) Assemblies


2922 X3 Table Assembly $529.95
This is the complete X-Y table assembly for a SIEG X3 small mill.
The table is 60 mm (6.25") by 540 mm (2.63"). It has three 2 mm T-slots.
The X-axis travel is approximately .8" and the Y-axis travel is approximately 6.3".
The dials are graduated in 0.00" and one turn of the hand wheels moves the table 0.00".
The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.
The SIEG X3 small mill is sold by Grizzly at their G0463 Mill / Drill. It is also sold by Harbor Freight
as their model 93885 Precision Gear Head Two Speed/Variable Speed Milling and Drilling Machine.

Mill: Small Mill (X3/SX3) Accessories


2954 Power Feed Kit, X3 $229.95
Ƚ Power table feed for the SIEG X3 and Super X3 mills
Ƚ Variable speed: 0 to 20 inches per minute
Ƚ Includes adjustable limit switches
Ƚ Fast traverse for high speed table motion
This power feed mounts on the left end of the mill's table and drives the X-axis feed screw.
The kit takes about 30 minutes to install. It is a bolt-on accessory and requires no modifications to
the machine.
The SIEG X3 Small Mill is sold by Grizzly at their G0463 Mill / Drill. It is also sold by Harbor Freight
as their model 93885 Precision Gear Head Two Speed/Variable Speed Milling and Drilling Machine.
The SIEG Super X3 Small Mill is sold by Grizzly at their G069 Mill / Drill.
3413 Power Feed Kit, X3 230V $229.95

3531 Tooling Plate for X3 Mills $103.50


Ƚ Made from cast aluminum tooling plate 5/8" thick
Ƚ Plate is 6.3" x 6"
Ƚ Holes tapped 3/8"-6
Ƚ Includes mounting bolts
Ƚ Designed to fit the X3 Mill
Cast aluminum tooling plate with 3/8-6 tapped holes and mounting bolts.

Mill: Tooling
3662 Boring Head Set, R8 Shank $79.95
Ƚ Includes boring head, R8 shank, and 9-piece boring bar set
Ƚ 2" diameter boring head holds /2" shank boring bars
Ƚ The boring head offsets up to 5/8", dial is graduated in 0.00"
Ƚ Minimum bore diameter is 5/6"
Ƚ Maximum bore depth is 3"
The carbide tipped 9-piece boring bar set includes three different length boring bars each for
minimum bores of 5/6", 7/6", and 9/6". The bore depth ranges from 3/4" to 3". The heat
treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The stand may vary from that shown in the photo.

(800) 981 9663 LittleMachineShop.com Page 61


Mill: Tooling
1626 Boring Head Shank R8 $19.95
This boring head shank has an R8 taper on one end and a 7/8 - 20 thread on the other.
The boring head shank adapts our boring head to mills with an R8 spindle.

1630 Boring Head Shank 2MT $19.95


1265 Boring Head Shank 3MT $24.95

1266 Boring Head, 2" $49.95


Ƚ 2" diameter boring head holds /2" shank boring bars
Ƚ The boring head offsets up to 5/8"
Ƚ Mounts on a shank with a 7/8 - 20 thread
Ƚ Dial is graduated in 0.00"

2186 Center It V-Block $14.95


Ƚ CENTER IT makes it easy to drill round stock and tubing
Ƚ Bolts to the drill press table and enables the drilling of round pieces parallel and centered
Ƚ Grooves on the outer sides eliminate slippage while holding by hand for sawing
Ƚ Place CENTER IT on the drill press table, run the stationary bit down to center the fixture
CENTER IT is a tool for drilling pipe and other round objects. CENTER IT is made specifically for use
in a drill press. No clamping of the tube is necessary since the angled flats of the jig hold it
centered. Holes will automatically be centered on the tube with no center-punching required. If
tubing is too large to drill in a single operation it can simply be turned over.
Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional
automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise"
grip ridges allow no-clamp holding of round stock for sawing and cutting.
CENTER IT is made of heavy aluminum extrusion.
CNETER IT is 5" Long, 4" Wide, and -3/4" High.

1258 End Mill Holder Set 5-Piece, R8 $79.95


The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/6, 3/8,
/2, 5/8, and 3/4 inches.
The end mill holders have an R8 shank and use the drawbar that comes with the mini mill.
This end mill holder works with the mini mill with R8 spindle and other mills that have an R8
spindle.
1255 End Mill Holder, 1/2" R8 $15.95
1253 End Mill Holder, 3/16" R8 $15.95
1257 End Mill Holder, 3/4" R8 $17.95
1254 End Mill Holder, 3/8" R8 $15.95
1256 End Mill Holder, 5/8" R8 $17.49

1978 End Mill Holder Set, 4-Piece 2MT - 3/8-16 $70.95


The 4-Piece end mill holder set includes adapters for end mills with shank diameters of 3/6, 3/8,
/2, and 5/8 inches.
This end mill holder set works with the Harbor Freight micro mill and other mills with a 2 Morse
taper spindle. The drawbar thread is 3/8-6 NC.
1706 End Mill Holder, 1/2" 2MT - 3/8-16 $18.95
1976 End Mill Holder, 3/16" 2MT - 3/8-16 $18.95
1705 End Mill Holder, 3/8" 2MT - 3/8-16 $18.95
1977 End Mill Holder, 5/8" 2MT - 3/8-16 $20.95

1636 End Mill Holder Set, 5-Piece 3MT - 3/8-16 $104.95


The 5-Piece end mill holder set includes adapters for end mills with shank diameters of 3/6, 3/8,
/2, 5/8, and 3/4 inches.
This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3
Morse taper spindle. The drawbar thread is 3/8-6 NC.
1633 End Mill Holder, 1/2" 3MT - 3/8-16 $24.95
1631 End Mill Holder, 3/16" 3MT - 3/8-16 $24.95
1635 End Mill Holder, 3/4" 3MT - 3/8-16 $26.95
1632 End Mill Holder, 3/8" 3MT - 3/8-16 $24.95
1634 End Mill Holder, 5/8" 3MT - 3/8-16 $25.95

(800) 981 9663 LittleMachineShop.com Page 62


Mill: Tooling
3404 Finger Sensitive Micro Drilling Table $129.95
Ƚ Table is 2.25" x 3"
Ƚ Travel is 0.325"
Ƚ For drilling very small holes
Ƚ Finger pressure lifts table to drill
Ƚ Dovetail column with adjustable brass gib
Called the Hummingbird by its manufacturer, this sensitive drilling table is perfect for drilling very
small holes.
The table has three clamping slots. Nuts for these slots are simply a piece of round rod with a cross
hole drilled and tapped through it.
3405 Clamping Kit, Hummingbird $21.95

1231 Fly Cutter Set $12.95


This is a set of three /2" shank fly cutters.
The 3/4" body fly cutter uses a 3/6" tool bit. The -/8" body fly cutter uses a /4" tool bit. The -
3/8" body fly cutter uses a 5/6" tool bit.
Fly cutters allow you to make fine finishes on large areas.
3094 Fly Cutter Set with Tool Bits $15.95

1709 Indexing Spin Jig, 5C $39.95


This indexing spin jig is used on milling machines, grinder, and inspection equipment.
The spindle is hardened and ground. The spindle accuracy is 0.0004 TIR. The indexing plate is
precision ground.
The spin index directly indexes in 0 steps and is graduated in 5 degree increments. The vernier
provides  degree steps.
1708 Collets, 5C Set of 6 $29.95

1664 Mill Table $27.95


This is the mill table from a 3-in- machine. It is approximately 9.5" long, 4.25" wide and " thick.
The mill table has 2 mm T-slots so it uses 7/6" T-slot nuts.

3651 Nano-Tram Combo, 1/4" Shank $99.00


Ƚ Includes Nano-Tram Base and Nano-Tram Top for all bench top mills
Ƚ Straddles most bench-top mill accessories
Ƚ Base is precision ground flat and parallel to .0003” over entire surface
Ƚ Nano-Tram Top shank is perpendicular to the face within 0.0003”
Ƚ Simply lower the Nano-Tram Top to the Nano-Tram base to tram the spindle
Nano-Tram allows you to quickly and accurately check and align the spindle of a vertical mill
perpendicular to the machine table without disturbing the work set-up. This tool works with any
bench top vertical mill that will accept a /4" tool in the spindle.
The Nano-Tram Base works on most bench top mills and straddles most bench-top mill accessories.
This tool is precision ground flat and parallel to .0003” over entire surface and is made from C020
HR steel. Inside dimensions for Nano-Tram Base are 6.44" between legs x 3.9" underneath gaging
surface x 4.0" wide. Material thickness is .375".
The Nano-Tram top is 3.45” in diameter with a .250” diameter shank that is .90” long. Overall
height of the tool is .375”. Shank is perpendicular to the face within .0003”. Material is 606-T6
aluminum, hard black anodize.

1963 Tap Guide $10.00


Ƚ Made in the USA by hungry machinists
This tap guide helps you start threaded holes straight.
The reversible point is spring loaded to maintain pressure on the tap. One end of the point has a
center hole for small taps, while the other end is pointed for larger taps.
The 0.500" diameter body is ground and knurled for easy handling.
Remove the setscrew in the back end to reverse the point.
This is a quality American-made product from Fisher Machine Shop.
3104 Tap Guide, 2MT Short $15.50

(800) 981 9663 LittleMachineShop.com Page 63


Mill: Tooling
3878 Tilting Table, 7" x 5" $129.95
Ƚ Tilts 40-0-40 degrees with worm drive
Ƚ Graduated in degrees for quick setting
Ƚ Heavy duty casting with three /2" T-slots
Ƚ Overall height 3.75"
Ƚ Locks in any position

1263 T-Slot Cleaner $1.49


Use this T-slot cleaner to clear the swarf from the T-slots on your mini mill.

Models: Flywheels
Flywheels from Martin Model
Ƚ Cast iron and bronze flywheels
Ƚ Highest quality made by Martin Model & Pattern
Ƚ Cast iron flywheels are fully annealed
Ƚ Castings are oversize to allow turning to the specified diameter
All Martin Model & Pattern iron castings are fully annealed for easier machining. When molten iron
is poured into a sand mold, it cools very quickly where it contacts the cold sand. Quick cooling
being the formula for hardening iron, this results in a very hard surface, or skin, on the casting. It's
commonly known that you must address this hard skin when you start machining a casting. But
Martin Model castings go through another heat treat process. After the castings have cooled, they
are once again heated to a high temperature, but this time they are cooled slowly. This ensures
that the castings are evenly soft throughout, and that there is no hard skin on the surface.
2756 Flywheel, 3" Diameter 6 Heavyweight Straight Spoke $16.95
2782 Flywheel, 3" Diameter 6 Heavyweight Straight Spoke Bronze $23.95
2755 Flywheel, 3" Diameter 6 Straight Spokes $16.95
2781 Flywheel, 3" Diameter 6 Straight Spokes Bronze $23.95
2758 Flywheel, 4 1/2" Diameter 6 Curved Spokes $22.95
2760 Flywheel, 4 1/2" Diameter 6 Tapered Spokes $22.95
2757 Flywheel, 4" Diameter 5 Straight Spokes $22.95

Models: Fully Assembled & Kits


3137 British Toy Loco Material Kit $149.95
Ƚ Working British toy loco steam engine
Ƚ Includes virtually all the material and drawings you need to make this engine*
Ƚ You machine the parts
Ƚ CAD drawings and complete Construction Manual
This is an operating toy steam engine.
This kit includes 65 pages of drawings and 60 pages of construction notes that are specific to the
mini mill and mini lathe.
When finished, the British toy loco measures 2.23" wide x 6.43" long x 3.72" high. If runs on 027
gage track which is .25" between the rails.
Because of the difficulties and dangers of using steam, these engines are most often powered by
compressed air.
* You must purchase one piece of brass basin drain tube from your hardware store.

3135 Model Steam Launch Engine Material Kit $59.95


Ƚ Working model of a steam launch boat engine
Ƚ Includes all the material and drawings you need to make this model
Ƚ You machine the parts
Ƚ CAD drawings and complete Construction Manual
This is an operating model engine.
This kit includes 5 pages of drawings and 32 pages of construction notes that are specific to the
mini mill and mini lathe.
When finished, the launch engine measures 2.00" wide x 2.93" long x 3.7" high.
Because of the difficulties and dangers of using steam, these engines are most often powered by
compressed air.

(800) 981 9663 LittleMachineShop.com Page 64


Models: Fully Assembled & Kits
3136 Model Steam Mill Engine Material Kit $79.95
Ƚ Working model of a steam mill engine
Ƚ Includes all the material and drawings you need to make this model
Ƚ You machine the parts
Ƚ CAD drawings and complete Construction Manual
This is an operating model engine.
This kit includes 35 pages of drawings and 32 pages of construction notes that are specific to the
mini mill and mini lathe.
When finished, the mill engine measures 2.79" wide x 4.54" long x 3.08" high.
Because of the difficulties and dangers of using steam, these engines are most often powered by
compressed air.

2213 Model Stirling Horizontal Engine Fully Assembled $189.95


Ƚ Operating model of a horizontal Stirling cycle engine
Ƚ Fully assembled model engine
Ƚ Operating model engine
Model of a horizontal Stirling cycle engine.
This fully assembled model includes everything shown in the photo.
The completed model is 0" long, 4 /2" wide, and 4" tall. The base is 2 /4" long 6 3/8" wide.
2207 Model Stirling Horizontal Engine Assembly Kit $155.95
2203 Model Stirling Horizontal Engine Material Kit $82.95

2212 Model Stirling Walking Beam Engine Fully Assembled $215.95


Ƚ Operating model of a walking beam Stirling cycle engine
Ƚ Fully assembled model engine
Ƚ Operating model engine
Model of a walking beam Stirling cycle engine.
This fully assembled model includes everything shown in the photo.
The completed model is 8 /2" long, 3 /2" wide, and 6 /2" tall. The base is 2 /4" long 6 3/8"
wide.
2206 Model Stirling Walking Beam Engine Assembly Kit $179.95
2202 Model Stirling Walking Beam Engine Material Kit $83.95

2594 Oscillating Steam Engine Material Kit $24.95


Ƚ Includes all the materials you need
Ƚ Plus all the hardware to assemble the engine
Ƚ Complete plans are included
Ƚ Great first project for beginners
This kit includes all the materials and hardware required to make the oscillating steam engine.
You will need a source of compressed air, such as an air compressor, to run this engine.
3485 Oscillating Steam Engine Material Kit and Instructional DVD SALE $44.95

Precision: Calipers
3617 Caliper, 6" Outside Spring $9.95
Ƚ Easy Adjustment Over Entire Range
Ƚ Centrally Located Adjustment Screw
Ƚ Balanced Legs, Uniform Tension
Ƚ Polished Natural Steel Finish
3688 Caliper, 6" Hermaphrodite $10.95
3618 Caliper, 6" Inside Spring $9.95
3687 Divider, 6" Spring $9.95

1235 Dial Caliper, 6" $14.95


This 6" Dial Caliper has clear graduations every 0.00". It is made of hardened stainless steel for
long life. It has a thumb wheel and a locking screw. The measuring faces are hardened, ground and
lapped. The bezel can be rotated 360°.
You can make inside, outside, depth and step measurements.
The dial caliper is furnished with a fitted case.

(800) 981 9663 LittleMachineShop.com Page 65


Precision: Calipers
3704 Dial Caliper, 6" Professional Quality $24.95
Ƚ Style and quality similar to Swiss-made calipers
Ƚ Clear graduations every 0.00"
Ƚ Hardened stainless steel bar, rack, gears, depth rod and measuring faces
Ƚ Knife-edge contacts for both inside and outside measurements
Ƚ Fine adjustment roller for one hand use
This 6" Dial Caliper is made of hardened stainless steel for long life. It has a thumb wheel and a
locking screw. The measuring faces are hardened, ground and lapped. The bezel can be rotated
360°.
You can make inside, outside, depth and step measurements.
The dial caliper is furnished with a fitted case.

1830 Dial Caliper, 6”, Starrett $162.00


Ƚ Starrett 6” white dial caliper and fitted case
Ƚ Starrett catalog number 20A-6
Ƚ The only American made dial caliper
This is one of the handiest measuring tools available, used by mechanics and toolmakers
everywhere. It is direct reading, reliable, and accurate.

3166 Dial Caliper, 6”, Starrett $98.00


Ƚ Starrett 6” white dial caliper and fitted case
Ƚ Starrett catalog number 202-6
Ƚ Sharp, clear dial graduations of .00" with .00" per revolution
Ƚ Sharp, black graduations on the satin finished bar, every .00"
This is one of the handiest measuring tools available, used by mechanics and toolmakers
everywhere. It is direct reading, reliable, and accurate.
With the ability to provide quick, accurate measurement of O.D., I.D. and depth, the dial caliper is
the most versatile precision hand tool on the market.
Imported

3612 Electronic Digital Caliper, 4" Fractions $29.95


Ƚ 4" (00 mm) range
Ƚ /64", 0.0005", 0.0 mm resolution
Ƚ /64", 0.00", 0.02 mm accuracy
Ƚ Displays fractions, inches, or mm
Ƚ Great when working on small machines
This 4" electronic digital caliper has manual power on and off.
There are three buttons.
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH/FRAC: Switches between metric, decimal inch, and fractional inch display.
Furnished with a fitted case.

1758 Electronic Digital Caliper, 6" $29.95


Ƚ 6" (50 mm) range
Ƚ 0.0005" (0.0 mm) resolution
Ƚ 0.00" (0.02 mm) accuracy
Ƚ Reads inches or mm
Ƚ Four button model has display lock
This 6" electronic digital caliper has manual power on and off. It won't go off and lose your
measurement.
There are four buttons (one more than most digital calipers).
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH: Switches between inch and metric display.
HOLD: Locks the display. Use this button when you take a measurement where you cannot easily
see the display. Press HOLD again to unlock the display.
You can make absolute or relative inside, outside, depth, and step measurements.
Furnished with a fitted case.
1776 Electronic Digital Caliper, 4" $29.95

(800) 981 9663 LittleMachineShop.com Page 66


Precision: Calipers
2983 Electronic Digital Caliper, 6" SALE! $17.95
Ƚ 6" (50 mm) range
Ƚ 0.0005" (0.0 mm) resolution
Ƚ 0.00" (0.02 mm) accuracy
Ƚ Reads inches or mm
This 6" electronic digital caliper has manual power on and off.
There are three buttons.
OFF: Turns the power off.
ON/ZERO: Turns the power on and sets the readout to zero at any position.
MM/INCH: Switches between inch and metric display.
You can make absolute or relative inside, outside, depth, and step measurements.
Furnished with a fitted case.
3707 Electronic Digital Caliper, 8" $39.95

3630 Electronic Digital Caliper, 6" Fractions $24.95


Ƚ 6", 50 mm range
Ƚ /64", 0.0005", 0.0 mm resolution
Ƚ /64", 0.00", 0.02 mm accuracy
Ƚ Reads fractions, inches or mm
Ƚ Great for woodworkers
This 6" electronic digital caliper has manual power on and off.
There are three buttons.
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.
Some fractional calipers read to /28". That's too fine a measure for use with wood, which
expands and contracts more than that. These calipers read to /64", which is precise enough,
without the bother of figuring out if 97/28" is larger or smaller than 3/4".
Furnished with a fitted case.
3612 Electronic Digital Caliper, 4" Fractions $29.95

3124 Electronic Digital Caliper, 6" Fractions $29.95


Ƚ 6", 50 mm range
Ƚ /64", 0.0005", 0.0 mm resolution
Ƚ /64", 0.00", 0.02 mm accuracy
Ƚ Reads fractions, inches or mm. Great for woodworkers
Ƚ PEC Brand
This 6" electronic digital caliper has manual power on and off.
There are three buttons.
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.
Some fractional calipers read to /28". That's too fine a measure for use with wood, which
expands and contracts more than that. These calipers read to /64", which is precise enough,
without the bother of figuring out if 97/28" is larger or smaller than 3/4".
Furnished with a fitted case.

2874 Electronic Digital Caliper, 6" IP65 Stainless $64.95


Ƚ 6" (50 mm) range
Ƚ 0.0005" (0.0 mm) resolution
Ƚ 0.00" (0.02 mm) accuracy
Ƚ Reads inches or mm
Ƚ IP65 level of protection against coolant, water, dirt and dust
This 6" electronic digital caliper has a rugged stainless steel case to protect the electronics.
The caliper has two buttons. One turns on the power and sets the readout to zero. The second
switches between inch and metric display. The caliper turns itself off after a period of inactivity.
It maintains its setting when the power is off.
You can make absolute or relative inside, outside, depth, and step measurements. You can set it
to zero at any position.
According to IEC529, in IP65 the first number "6" identifies protection against ingress of dust and
the second number "5" identifies protection against water jets projected by a nozzle from any
direction for a duration of 3 minutes.
Furnished with a fitted case.

(800) 981 9663 LittleMachineShop.com Page 67


Precision: Calipers
2926 Electronic Digital Caliper, 6" Large Display $34.95
Ƚ 6" (50 mm) range
Ƚ 0.0005" (0.0 mm) resolution
Ƚ 0.00" (0.02 mm) accuracy
Ƚ Reads inches or mm
Ƚ Large display for easy reading
This 6" electronic digital caliper has manual power on and off. It won't go off and lose your
measurement.
There are three buttons.
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH: Switches between inch and metric display.
Furnished with a fitted case.

2530 Electronic Digital Caliper, 6", Starrett 797 $193.00


Ƚ Large, easy-to-read LCD display
Ƚ IP65 level of protection against coolant, water, dirt and dust
Ƚ Hardened stainless steel measuring surface for long life
Ƚ Fine adjustment for precision measurements
Ƚ Resolution is .0005" (0.0 mm)
Starrett 6” electronic digital caliper resists coolant, water, dirt and dust.
Starrett catalog number 797B-6/50.
The Starrett 797 electronic caliper provides an IP65 level of protection against foreign matter in
hostile shop environments. In addition to being coolant and water resistant, the 797 also offers
excellent protection against chips, dirt, dust, and other contaminants. The extra large LCD
(character height .30") makes the 797 exceptionally easy to read. All 797 models also include an
output port for RS232 equipped devices. While there are other IP65 electronic calipers available,
only the 797 is a Starrett - for a century and a quarter, the tool of choice for the most experienced
toolmakers and machinists when the measurements are most critical.
According to IEC529, in IP65 the first number "6" identifies protection against ingress of dust and
the second number "5" identifies protection against water jets projected by a nozzle from any
direction for a duration of 3 minutes.
With this caliper you can set zero at any position, read inches or millimeters, and lock the slide in
position.
There is a manual on/off button, plus the caliper turns itself off after four hours of inactivity.

2752 Electronic Digital Caliper, 6", Starrett 799 SALE! $99.95


Ƚ Large, easy-to-read LCD display can be zeroed at any position
Ƚ Automatic shut-off after 5 minutes of nonuse, last measuring position retained when shut off
Ƚ Hardened stainless steel body for long life
Ƚ Fine adjustment thumb wheel
Ƚ Resolution is .0005" (0.0mm) and linear accuracy meets DIN 862 standard
Starrett 6” electronic digital caliper
Starrett catalog number 799A-6/50
Starrett's 799 series electronic calipers are light, comfortable, easy to use, and constructed with
features that have made Starrett slide calipers the machinist's first choice for many years. They
have a slim, streamlined profile, function buttons for zero and inch/mm, a large, clear, easy-to-
read LCD display, and long battery life. The 799 Calipers are furnished in a fitted, protective case.
Jaw Depths:  /2" outside, 5/8" inside.

Precision: Edge and Center Finders


2747 Center Finder, Drill Press PEC $10.50
Ƚ Accurately and quickly locates center on cylindrical workpieces
Ƚ Satin chrome finish
Ƚ Place tool in drill chuck or collet and line up pointer with line scribed on shaft
Ƚ 3/8" diameter shank
Drill press center finder made in the US by Products Engineering Corporation (PEC).
The drill press center finder is a quick way to find the approximate center of cylindrical objects.
Line the pointer up with the mark and the drill chuck is centered over the work.

(800) 981 9663 LittleMachineShop.com Page 68


Precision: Edge and Center Finders
2060 Coaxial Centering Indicator $69.95
Ƚ Use this indicator to quickly center work pieces or fixtures on your mill
Ƚ The indicator remains stationary while the spindle rotates
Ƚ Can be used to center internal and external diameters
Ƚ The locating accuracy is 0.0002" of center
Ƚ Furnished in a fitted case
Use this indicator to quickly center work pieces or fixtures on your mill.
The measuring range is 0.25". The shank is 0.375" diameter and 0.75" long. The indicator is 5.5"
long from the top of the shank to the bottom of the tip holder (the black part).
Can measure internal diameters from 0.2" to 4.25" and external diameters from zero to 4.25".
This set includes: Indicator body, restraining rod (prevents rotation), spring-loaded center point
feeler, three straight feelers (for IDs), three curved feelers (for ODs).

2652 Collet Adapter for Edge Finders, Starrett $17.50


Ƚ Starrett catalog number PT2834
This is a timesaving accessory for edge finders with a 3/8" shank.
The collet adapter allows quick installation and removal of the edge finder, eliminating the need
for collet changes on Bridgeports and similar machines. It can be used with any attachment with a
3/8" shank.
The progressive steps are /4", 5/6", 3/8", /2", 5/8", 3/4" and ". Step depths vary from .00" to
.200".

1240 Edge and Center Finder $5.95


This 3/8" diameter combination edge and center finder helps you locate work on your mill.
The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The
center finder end tapers to a point to locate holes.
The edge and center finder is hardened and ground all over.

1959 Edge and Center Finder, Fisher $12.50


Ƚ Made in the USA by hungry machinists
This 3/8" diameter combination edge and center finder helps you locate work on your mill.
The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The
center finder end tapers to a point to locate holes.
The edge and center finder is hardened and ground all over.
The edge and center finder is furnished with a quality vinyl case.
This is a quality American-made product from Fisher Machine Shop.

2604 Edge and Center Finder, Laser 3/8" Shank $84.50


Ƚ 3/8" shank fits collets and end mill holders
Ƚ 3.375" overall length
Ƚ Uses common SR44 batteries (included)
Ƚ Accuracy to 0.00"
Ƚ Includes polarizing attachment to adjust dot size
The Laser Center/Edge Finder™ is a new tool for your mill that saves setup time. It eliminates the
frustrations and doubts of using the century-old indirect method with a conventional edge finder
or wiggler.
The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the
workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No
more calculating half the diameter of the edge finder.
You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations.
Simply move the laser beam to the location on the workpiece and the spindle is aligned.
The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate.
The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use.
2606 Edge and Center Finder, Laser 1/2" Shank $84.50
2543 Edge and Center Finder, Laser 1/4" Shank $84.50
2624 Edge and Center Finder, Laser 10 mm Shank $84.50
2623 Edge and Center Finder, Laser 6 mm Shank $84.50
2679 Edge and Center Finder, Wet Cabinet Laser 1/2" $94.50
2887 Magnetic Holder for Laser Edge Finder $15.95
2886 Polarizing Attachment for Laser Edge Finder $19.95

(800) 981 9663 LittleMachineShop.com Page 69


Precision: Edge and Center Finders
1822 Edge and Center Finder, Starrett $24.50
Starrett double end edge and center finder.
Starrett catalog number 827B.
The body is 0.500” diameter. One end has a 0.200” diameter contact. The other end has a pointed
contact.
Work surfaces may be located easily, quickly and accurately with these edge finders. Work with
flat, straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed
lines - all can be accurately located with this handy tool. Body and contacts are made of tool
steel, hardened, ground and lapped to close tolerances for diameter and concentricity.
3793 Edge and Center Finder, Metric, Starrett $24.50

1960 Edge Finder 3/8" Audible, Fisher $11.00


Ƚ Made in the USA by hungry machinists
This 3/8" diameter edge finder helps you locate work on your mill. When you reach the edge of the
work it not only jumps to the side, but it clicks too.
The edge finder has a 0.200" diameter cylinder to quickly find the edge of a work piece.
The edge finder is hardened and ground all over and is furnished with a quality vinyl case.
This is a quality American-made product from Fisher Machine Shop.
1961 Edge Finder 1/4" Audible, Fisher $12.50

3188 Edge Finder, Electronic $24.95


Ƚ Lights up when it contacts the edge of the work
Ƚ Repeatable to 0.0002"
Ƚ Works on any conductive metal
Ƚ Includes LED light and battery
Ƚ Made in USA
This electronic edge finder has a /2" shank. It is 4" long overall.

1823 Edge Finder, Starrett $21.00


Starrett single end edge finder.
Starrett catalog number 827A.
The body is 0.375” diameter. The contact end is 0.200” diameter.
Work surfaces may be located easily, quickly and accurately with these edge finders. Work with
flat, straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed
lines - all can be accurately located with this handy tool. Body and contacts are made of tool
steel, hardened, ground and lapped to close tolerances for diameter and concentricity.

2294 Wiggler Center Finder Set $22.95


Ƚ Collet chuck and 4 probes
Ƚ Includes needle point, 0.025" Ball, 0.00" Disk, and 0.250" Shank indicator attachment
Ƚ Made in USA
This wiggler center finder set comes with a collet chuck and 4 probes for finding centers, edges,
and indicating. Each probe snaps into the body without removing the collet nut.
The wiggler shank is 0.375" diameter.
1603 Wiggler Center Finder Set $9.95

2278 Wiggler Center Finder Set, Starrett $31.50


Starrett Wiggler Center Finder.
Starrett catalog number S828.
The wiggler center finder and three different attachments adapt to countless applications and are
readily interchangeable. The attachments are snapped in the chuck without removing the collet
nut and are clamped by a ball swivel-joint, which permits adjustment to an angular position or
true concentricity.
With the pointed shank, working centers can be quickly and accurately located. Spring tension on
the ball of the point permits guiding the point to true concentricity so that the work can be
brought into perfect alignment with the machine spindle.
The ball contact is useful in locating work by first bringing the contact (ball diameter 0.250" or 6.3
mm) against the work, a slot, hole, shoulder, or end, and indexing the work to the desired position
relative to the spindle.
The disc contact, which has a small disc at the end (0.00"/2.5 mm) diameter, permits use in
more confined areas such as slots or shallow holes.
The wiggler shank is 0.375" diameter.

(800) 981 9663 LittleMachineShop.com Page 70


Precision: Edge and Center Finders
2279 Wiggler Center Finder, Starrett $19.50
Starrett Wiggler Center Finder.
Starrett catalog number 828A.
The wiggler center finder and pointed shank quickly and accurately locates working centers.
Spring tension on the ball of the point permits guiding the point to true concentricity so that the
work can be brought into perfect alignment with the machine spindle.
The attachment is snapped in the chuck without removing the collet nut and is clamped by a ball
swivel-joint, which permits adjustment to an angular position or true concentricity.

Precision: Layout
1250 Combination Square Set, 12" $36.95
Ƚ 2" combination square set
Ƚ Includes square head, center head, and protractor head
Ƚ Stainless steel blade with graduations of 8ths, 6ths, 32nds, and 64ths
This 4-Piece combination square set features a stainless steel blade, and includes a square head, a
center head, and a protractor.

2738 Combination Square Set, PEC 12" $99.95


Ƚ Combination square with 2" machinist's blade, square/miter head, protractor head, and center
head
Ƚ Easy to read satin chrome finish blade is fully hardened and tempered
Ƚ 4R graduations, 8ths & 6ths, 32nds & 64ths. Protractor graduated 0-80 degrees in both
directions
Ƚ Heads have hammertone powder-coat finish
Ƚ Square/miter head includes level vial and hardened scribe tool
Combination square made in the US by Products Engineering Corporation (PEC).

3171 Combination Square Set, Starrett 12" $175.00


Ƚ Starrett 2" combination square set
Ƚ Starrett catalog number 9-2-4R
Ƚ Includes square head, center head, and protractor head
Ƚ Graduation No. 4R- 8ths, 6ths, Quick Reading 32nds, 64ths
The combination square set has reversible lock bolts, scriber, spirit level in both square head and
protractor head, direct reading double 80° protractor scale, hardened steel, machine-divided
blade. Cast iron heads with black wrinkle finish.
The blade is " wide and 3/32" thick.

3589 Combination Square Set, Starrett 12" $195.00


Ƚ Starrett 2" combination square set
Ƚ Includes square head, center head and reversible protractor head
Ƚ Starrett catalog number C435-2-4R
Ƚ Graduation No. 4R- 8ths, 6ths, Quick Reading 32nds, 64ths
The combination square set has reversible lock bolts, scriber, spirit level in both square head and
protractor head, direct reading double 80° protractor scale, hardened steel, machine-divided
blade. Cast iron heads with black wrinkle finish.
The blade is " wide and 3/32" thick and has a satin chrome finish.

1838 Combination Square Set, Starrett 12" $192.00


Ƚ Starrett 2" combination square set
Ƚ Includes square head, center head and reversible protractor head
Ƚ Starrett catalog number 435-2-4R
Ƚ Graduation No. 4R- 8ths, 6ths, Quick Reading 32nds, 64ths
The combination square set has reversible lock bolts, scriber, spirit level in both square head and
protractor head, direct reading double 80° protractor scale, hardened steel, machine-divided
blade. Cast iron heads with black wrinkle finish.
The blade is " wide and 3/32" thick.
2656 Combination Square Set, Starrett 6" $117.00

(800) 981 9663 LittleMachineShop.com Page 71


Precision: Layout
1839 Combination Square, Starrett 12" $65.00
Ƚ Starrett 2" combination square with square head
Ƚ Starrett catalog number H-2-4R
Ƚ Graduation No. 4R- 8ths, 6ths, Quick Reading 32nds, 64ths
The square has a reversible lock bolt, scriber, spirit level, and hardened steel, machine-divided
blade with regular finish. Cast iron head with black wrinkle finish.
The blade is " wide and 3/32" thick.
2451 Combination Square, Starrett 4" $57.00

2741 Double Square, PEC 6" $31.50


Ƚ Double square with 6" blade
Ƚ Easy to read satin chrome finish blade is fully hardened and tempered
Ƚ 4R graduations, 8ths & 6ths, 32nds & 64ths
Ƚ Head has hammertone powder-coat finish
Double square made in the US by Products Engineering Corporation (PEC).

3559 Double Square, Starrett 4" $54.00


Ƚ Starrett 4" double square with graduated blade
Ƚ Starrett catalog number 3A
Ƚ Popular with machinists, toolmakers, and patternmakers
The sliding blade is adjustable making it more practical for a wide variety of uses than a common
square with fixed blade. The faces of the head are ground square.

2025 Double Square, Starrett 6" $67.00


Ƚ Starrett 6" double square with graduated blade
Ƚ Starrett catalog number 3C
Ƚ Popular with machinists, toolmakers, and patternmakers
Ƚ The head is approximately 3-/2" (90 mm) long
Ƚ The faces are approximately 9/6" (4 mm) wide
The sliding blades are adjustable making it more practical for a wide variety of uses than a
common square with fixed blade. The faces of the head are ground square, and the 6" (50 mm)
size has a level.
The beveled blade and the drill grinding blade shown at the bottom of the photo are not included
with this product.

3810 Layout & Marking Kit SALE! $12.99


Ƚ Scriber with 2-3/8” Point, Starrett
Ƚ Sharpie Magnum Permanent Marker, Black
Ƚ Sharpie Metallic Fine Point Permanent Marker
The big, fat Sharpie Magnum marker in this kit is a great substitute for layout dye. It marks on
virtually any surface, provides an opaque covering to scribe, and doesn't dry out in the can.
Not to mention that it avoids all the hassle and limitations of shipping and using hazardous layout
dyes.
The Starrett scriber has been the industry standard for many years.
The Sharpie Metallic marker can be used on dark materials where contrast is needed. It is also
great for identifying materials in your steel rack.

2549 Machinist Square Set $36.95


Ƚ Includes 2", 3", 4" and 6" squares
Ƚ Made from fully seasoned and hardened tool steel
Ƚ Accurate right angles both inside and outside
Ƚ Beams are ground and lapped
Ƚ Class H accuracy: 0.0008" + 0.000" per inch

(800) 981 9663 LittleMachineShop.com Page 72


Precision: Layout
2742 Machinist Square Set, PEC $44.95
Ƚ Includes 2", 3", 4" and 6" squares
Ƚ Made from high quality tool steel
Ƚ True right angles inside and outside
Ƚ Beams and blades are precision ground
Ƚ Blade is hardened
Machinist squares made in the US by Products Engineering Corporation (PEC).
Length of blade is measured from inner edge of beam to end of blade.
These squares are square within 0.0006" over the length of the blade. The two sides of the blades
and beams are parallel within 0.0005" over their length.

3186 Optical Center Punch $74.95


Ƚ Accuracy to 0.002"
Ƚ A center dot and circle target the punch location
Ƚ Magnifies without distortion or parallax
Ƚ Includes sturdy storage case
Even less experienced machinists can punch layout points to within 0.002" using this high power
piloted center punch system.
The optical center punch is located over a scribed workpiece and adjusted until centered using
the optics. The optical pilot is then removed and replaced by the bunch. A tap marks the spot.

2423 Precision Machinist's Level, 12", Starrett $181.00


Ƚ Starrett machinist's improved level
Ƚ Starrett catalog number 98-2
Ƚ Ground and graduated main vials
Ƚ Cross test vial and plumb vial
Ƚ 0.005" per foot (0.42 mm per meter) accuracy
These levels have ground and graduated main vials, and a cross test vial. The 2" level also has a
plumb vial. These vials are adjustable to a positive setting and are housed in a satin chrome brass
tube with a friction-fit closing cover to prevent breakage.
The base of the levels features an involute groove running the length of the base, which provides a
reliable seat for round work such as pipes or shafting. With the cross test vial, it is possible to
simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused
by canting the level sidewise on round work.
The main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42
mm per meter). There are five, six, or seven lines on each side of the bubble, depending on the
base length.
These are the finest levels available, used for precision work that is typically required in industry.
They all have these features:
All level bases are made from the finest quality seasoned cast iron and are precision-machined on
the reference surface. Nonmachined surfaces have an attractive, black wrinkle finish. An involute
longitudinal groove between the bearing flats for accurate seating on round work. This groove has
a special involute design, permitting better centering and greater capacity to handle larger
rounds. Groove and bearing flats are machined together for maximum accuracy.
2654 Case for Precision Machinist's Level, 12" Starrett $35.30
2423 Precision Machinist's Level, 12", Starrett $181.00
2427 Precision Machinist's Level, 18" & Case, Starrett $372.00
2425 Precision Machinist's Level, 18", Starrett $291.00
2320 Precision Machinist's Level, 4", Starrett $88.00
1846 Precision Machinist's Level, 6", Starrett $104.00
3174 Precision Machinist's Level, 8", Starrett $128.00

1824 Scriber with 2-3/8" Point, Starrett $8.70


Starrett hand scriber.
Starrett catalog number 70A.
The /4" diameter handle is of steel, knurled, and nickel plated. The scriber point is steel,
properly hardened and finely tapered so that the location of the point is not obscured. The scriber
is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped
into the handle, and locked by the chuck. The hexagon head prevents rolling.
The scriber point is shipped reversed in the handle so the point is protected.
2655 Scriber with 2-7/8" Point, Starrett $11.00

(800) 981 9663 LittleMachineShop.com Page 73


Precision: Layout
3885 Scriber withTwo Tips, Starrett $23.50
Ƚ Tempered well-finished steel
Ƚ Points are finely tapered
Ƚ Nickel plated knurled handle
Scribers are steel, properly tempered and well finished. The points are finely tapered so that the
scriber point can be easily seen on the work. The handle, as well as the points, has a knurled grip.
The length of the scriber is 9" (225mm). Points screw into the handle and fit either end. The
knurled handle is nickel-plated.

3605 Sharpie Fine Point Permanent Marker, Black $1.29


Ƚ The original pen style permanent marker
Ƚ Permanent on most surfaces
Ƚ Quick-drying ink
Ƚ Fade and water resistant
Ƚ Marks on plastic, nmetal, cardboard, vinyl, leather and glass
This is the original Sharpie marker. It has many uses around the shop, including using it as layout
fluid.
3607 Sharpie King Size Permanent Marker, Black $1.59
3608 Sharpie Magnum Permanent Marker, Black $2.95
3606 Sharpie Metallic Fine Point Permanent Marker $1.95

1841 Square, 4-1/2" Master Precision, Starrett $171.00


Starrett 4-/2" master precision square
Starrett catalog number 20-4 /2.
The finest precision-checking squares - not graduated. Squareness accuracy to .000" (0.0025 mm)
every 6" (50 mm)
These hardened steel squares are used when extreme accuracy is required. The beams and blades
are hardened, ground, and lapped to insure parallelism and straightness. The beam is grooved at
the inner corner for clearance of burr or dirt. Made of high quality tool steel, with the finest of
craftsmanship throughout.

3173 Square, 6" Toolmakers, Starrett $150.00


Ƚ Starrett toolmaker's grade stainless steel square
Ƚ Starrett catalog number 3020-6
Ƚ Blade length 5 29/32"
Ƚ Beam length 3 29/32"
Ƚ Squareness accuracy to .0002" (0.005mm) for every 6" (50mm)
These high quality toolmaker's squares feature hardened, ground, and lapped stainless steel
construction on both the blade and the beam. The beam is machined at the inner corner for
clearance.
3172 Square, 3" Toolmakers, Starrett $82.00
3564 Square, 4" Toolmakers, Starrett $102.00

3069 Surface Gage $19.95


Ƚ For scribing lines, use on a surface plate
Ƚ Includes 4" and 7" spindles
Ƚ Bottom V-groove ground for cylindrical work
Ƚ Retractable pins in base for working on flat surfaces
Ƚ Fine adjustment

3068 Surface Plate 9"x12" $29.95


Ƚ Black granite for long term stability
Ƚ Grade B: ±0.000 accuracy
Ƚ Meets federal specification GGG-P-463C
These surface plates are checked with an auto-collimator for overall accuracy. All points on the
surface are between two parallel planes 0.0002" apart.

(800) 981 9663 LittleMachineShop.com Page 74


Precision: Layout
2031 Transfer Punch Set 3/32" to 1/2" $9.95
Ƚ 28 piece transfer punch set
Ƚ Sizes from 3/32" to /2" by /64" plus a 7/32" punch
Ƚ Heat treated and tempered tool steel for long life
Ƚ Transfer punches are 0.0025" undersize

Transfer Screw Sets


Ƚ Includes 6 transfer screws in a wrench/holder
Ƚ Transfer exact location of threaded holes
Ƚ Works with blind holes

3082 Transfer Screw Set, 1/2"-13 Thread $13.95


3079 Transfer Screw Set, 1/4"-20 Thread $13.95
3078 Transfer Screw Set, 10-24 Thread $13.95
3081 Transfer Screw Set, 3/8"-16 Thread $13.95
3074 Transfer Screw Set, 4-40 Thread $13.95
3080 Transfer Screw Set, 5/16"-18 Thread $13.95
3075 Transfer Screw Set, 5-40 Thread $13.95
3076 Transfer Screw Set, 6-32 Thread $13.95
3077 Transfer Screw Set, 8-32 Thread $13.95
3087 Transfer Screw Set, M10 Thread $13.95
3083 Transfer Screw Set, M4 Thread $13.95
3084 Transfer Screw Set, M5 Thread $13.95
3085 Transfer Screw Set, M6 Thread $13.95
3086 Transfer Screw Set, M8 Thread $13.95

3609 Uni-Paint Valve Action Paint Marker - Black $2.95


Ƚ Quick drying, Acid Free
Ƚ Marks opaque and glossy on light or dark surfaces – just like paint
Ƚ Fade-Proof, Water-Proof
Ƚ Must be shipped by ground; not available outside the continental US
Marks on virtually any surface; glass, metal, wood, rubber, stone, plastic, paper, vinyl, leather,
felt, canvas and more.
3610 Uni-Paint Valve Action Paint Marker - White $2.95

3028 Universal Bevel, PEC $19.95


Ƚ Six inch long blade
Ƚ Set to any angle
Ƚ Stainless steel
Ƚ Made in USA
This high-accuracy T-bevel features both straight slots and offset slots in the blade and straight
slots in the stock. This combination allows for the widest possible variety of adjustments.
Align the T-bevel with the angle you want to duplicate, then tighten the knurled locking nut.

2227 Universal Bevel, Starrett $89.00


Ƚ Starrett Universal Bevel
Ƚ Starrett catalog number 47
Ƚ Wide variety of adjustment and angle settings
Ƚ Blade is 6" (50 mm) long
This improved Universal Bevel has both offset and straight slots in the blade, in combination with
straight slots in the stock that allow for a wide variety of adjustment and angle settings that are
impossible to obtain with many ordinary bevels.
Length of the blade is 6" (50 mm), and the stock, 3 /2" (90 mm). The stock lies flat on the work
or paper since the head of the clamping bolt is recessed. This tool can be set to duplicate an angle
from a master, or it may be easily converted into a Bevel Protractor by using this tool with the No.
93 Protractor (PN 833).

(800) 981 9663 LittleMachineShop.com Page 75


Precision: Measuring
Precision: Measuring
3103 Angle Gage Set $19.95
Ƚ Set of 8 angle gages
Ƚ 5° to 90° by 5° increments
Ƚ Satin chrome finish
Ƚ Eight gaging surfaces on each gage
Ƚ Check primary angle, /2 primary and complementary angles
The angle gage set is furnished in a vinyl case for storage.

1707 Battery, LR44 Alkaline $0.95


These LR44 alkaline batteries fit most electronic digital calipers.
.6 mm diameter, 5.4 mm thick.
.50 volts (nominal), 05 mAh.
These batteries interchange with AG3, D357, 357, A76, LR44W, CX44, SR44.
2975 Batteries (10), LR44 Alkaline $5.95
2976 Battery, SR44 Silver Oxide $2.49

3459 BoltSize-It Bolt and Nut Checker $4.95


Ƚ Sizes bolts, nuts, and screws
Ƚ Sorts coarse threads, fine threads, and metric threads
Size bolt diameter by pushing bolt through sizing holes
Gauges hex nuts and washers (USS, SAE)
Gauges metric hex nuts and washers by holding under metric holes
Measure US and metric thread pitch
Special notch gauges flat headed metal and wood screws
Ruler marked with inches and millimeters
Sturdy and lightweight plastic resists water, alcohol, oil, and grease
Fits in shirt pocket (8-5/8" x 3-/4" or 27 mm x 82 mm)

3708 Bore Gage Set, 2" - 6" Dial $69.95


Ƚ Measure ID of holes from 2" to 6" in diameter
Ƚ Close tolerance measurement of ID, taper and roundness
Ƚ Furnished with AGD Group II dial indicator
Ƚ Accuracy: 0.0005"
Ƚ Includes fitted case and interchangeable anvils
This dial bore gage is easy to calibrate with a ring gage or micrometer.

2743 Center Gage, 60deg, PEC $6.95


Ƚ Made of high quality steel
Ƚ Satin chrome finish
Ƚ Use for grinding and setting thread cutting tools
Ƚ Gaging surfaces are precision ground
Center gage made in the US by Products Engineering Corporation (PEC).
Used for grinding and setting screw cutting tools. Scales with 4ths and 20ths graduations provided
on one side, 24ths and 32nds on reverse side. Scales are used to determine number of threads per
inch. Gage also features a table of double depths of thread for selecting size of tap drills. Made of
hardened spring tempered steel, with a protective satin chrome finish. All gaging surfaces are
precision ground.

1829 Center Gage, 60deg, Starrett $19.50


Ƚ Starrett 60 degree center gage
Ƚ Starrett catalog number C39
Ƚ Extremely handy for use in grinding and setting thread cutting tools
These gages meet the following standards: American National or U.S. 60°, Whitworth or English
55°, and Metric 60°. They also have a very useful scale for finding the number of threads per inch
through graduations in 4ths, 20ths, 24ths and 32nds of an inch. The gage also has a table of
double depths of threads for determining size of tap drills.

(800) 981 9663 LittleMachineShop.com Page 76


Precision: Measuring
2882 Comparator Stand & Indicator $39.95
Ƚ Fine vertical adjustment with lock
Ƚ 6" x 6" granite base flat within 0.0005"
Ƚ " Diameter column, 8" tall
Ƚ Includes a 0-" x 0.00" dial indicator
This granite dial gage comparator stand will accept any AGD , 2, 3, or 4 dial indicator.

3546 Depth Gage, Starrett 6" Combination $56.00


Ƚ Starrett 6" combination gage, 32nds/64ths
Ƚ Starrett catalog number 236
Ƚ Combination depth gage and protractor
This depth gage has an added feature permitting its use as a protractor for measuring angles. It is
a simple, handy tool that is a welcome addition to any machinist's tool box.
The head is graduated both left and right to 30, 45, and 60 degrees. The rule can be set to any of
these angles by swinging the rule until the line on the turret coincides with the desired angle
Head is made of hardened steel, ground, and nicely polished – 2 5/8" (66mm) long and /8" (3mm)
wide
One side of the base is cut out to permit easier and more accurate readings
The center of the head is recessed so that the tool will lay flat to permit more accurate
measurements
A tempered rule that has been accurately machined divided, is smoothly fitted to the head and
can be locked in position by a knurled nut

3547 Depth Gage, Starrett Steel Rule 0-6" Range, 32nds/64ths $43.00
Ƚ Starrett steel rule depth gage, 0-6" range, 32nds/64ths
Ƚ Starrett catalog number 237
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch by
simply adjusting the rule to the required depth.
The gage consists of a nicely finished, hardened steel head and an accurate, machine divided,
tempered steel rule. The rule is Starrett No. 60N.
The gage can be smoothly adjusted to the required measurement and then locked into position by
a knurled nut
The base is cut out on one side, adjacent to the rule, permitting easier readings and more
accurate measurements

3716 Dial Indicator, 0.25" x 0.001" Small Face $14.95


Ƚ 0.25-" dial indicator with 0.00" resolution
Ƚ AGD Group I, .5" diameter dial face for tight locations
Ƚ Rack & contact point made of hardened stainless steel
Ƚ Jeweled movement
This /4" stroke dial indicator features large, easy to read numbers and crisp graduations. Each
revolution is 0.00", indicated by the revolution counter. The resolution is 0.00". There is a
mounting lug on the back of the case.

3169 Dial indicator, 1" x 0.001" With Lever, Starrett $145.50


Ƚ Range: .000"
Ƚ Face diameter: 2-/4"
Ƚ Shockless, hardened steel gear train and jewel bearings
Ƚ Lug on center of the back
Ƚ Includes case stem cap and lever control
Starrett catalog numbers 25-44J WCSC and PT99356
These indicators have a shockless, hardened steel gear train and jewel bearings, except where
noted. They are furnished with a lug-on-center back.
The lever control provides an easy way to lift the measuring point off the work.

(800) 981 9663 LittleMachineShop.com Page 77


Precision: Measuring
1835 Dial Indicator, 1”, Starrett $123.00
Ƚ Range: .000"
Ƚ Face diameter: 2-/4"
Ƚ Graduations: 0.00"
Ƚ Shockless, hardened steel gear train and jewel bearings
Ƚ Lug on center of the back
Starrett catalog number 25-44J.
These indicators have a shockless, hardened steel gear train and jewel bearings. They are
furnished with a lug on the center of the back.

1782 Dial Indicator, Magnetic Base & Point Set $25.95


Ƚ 0-" dial indicator with 0.00" resolution
Ƚ Magnetic base indicator holder with fine adjustment
Ƚ 22 piece indicator point set
Ƚ All in a plastic case
This " stroke dial indicator features large, easy to read numbers and crisp graduations.
Each revolution is 0.00", indicated by the revolution counter. The resolution is 0.00". There is a
mounting lug on the back of the case.
The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy
to position. The v-groove base allows you to mount it on cylindrical surfaces.
Includes a 22 piece indicator point set and a plastic case.
1593 Dial Indicator and Magnetic Base $19.95
2873 Dial Indicator, 1" x 0.0005" $14.95
1236 Dial Indicator, 1" x 0.001" $10.95
2726 Dial Indicator, 2" x 0.001" $21.95
2531 Magnetic Back for Dial Indicator $4.95
2424 Plastic Case for Magnetic Base and Dial Indicator $4.95
1783 Point Set, Dial Indicator $3.95

1819 Dial Indicator, Starrett Last Word $146.00


Ƚ Dial indicator with universal friction holder with shank
Ƚ Graduation: 0.0005"
Ƚ Range: 0.030"
Ƚ Dial Reading: 0-5-0
Starrett catalog number 7LPSZ.
Steel Contact Point Length: 5/32" (4 mm)
Steel Contact Point Ball Diameter: 0.20" (3 mm)
These handy test indicators are among the most versatile available. Their small size and variety of
attachments handle all jobs with ease and accuracy. A very useful feature is the shaded dial -
when used with a mirror, such as in a jig bore application, the operator always knows where he is.

3168 Dial test indicator, 0-15-0 x 0.0001", Starrett $319.00


Ƚ Starrett dial test indicator with attachments
Ƚ Starrett catalog number 708ACZ
Ƚ Range is 0.00" in either direction
Ƚ Precision gear-driven design with smooth, jeweled movement
Ƚ Dial test indicator comes in a fitted case
These precision test indicators were designed to be positioned for easy and accurate readability.
The versatility of the angled head, combined with the three dovetail mounts eliminates the need
for having both vertical and horizontal style test indicators.
Includes a dovetail body clamp, tool post holder, swivel post snug with dovetail indicator clamp,
and a shug and rod unit.
For extreme accuracy we recommend positioning the lever contact so that it is approximately 5°
from being horizontal with the workpiece

(800) 981 9663 LittleMachineShop.com Page 78


Precision: Measuring
1249 Dial Test Indicator, 0-15-0 x 0.0005" $29.95
Ƚ Dial test indicator with 0.0005" graduations
Ƚ Range is 0.030" in either direction
Ƚ Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter
point
Ƚ Dial test indicator comes in a fitted case
Ƚ 7 jewel movement
3522 Dial Test Indicator, 0-15-0 x 0.0005" and Universal Magnetic Base $54.95
2875 Dial Test Indicator, 0-4-0 x 0.0001" $49.95

3709 Dial Test Indicator, Interapid Style 0-15-0 x 0.0005" $69.95


Ƚ Dial test indicator with 0.0005" graduations
Ƚ Range is 0.030" in either direction
Ƚ Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter
point
Ƚ Dial test indicator comes in a fitted case
Ƚ Jeweled movement
This Swiss-type horizontal dial indicator has a large .5" dial.

3548 Dial Test Indicator, Starrett With Dovetail Mount, 0-5-0 x 0.0001" $253.00
Ƚ Starrett dial test indicator with dovetail mount
Ƚ Starrett catalog number 708AZ
Ƚ Dial test indicator with 0.000" graduations
Ƚ Range is 0.00"
These precision test indicators were designed to be positioned for easy and accurate readability.
The versatility of the angled head, combined with the three dovetail mounts eliminates the need
for having both vertical and horizontal style test indicators. These are the features that make this
series of test indicators superior to ordinary types.
Angled head for better reading position
Large  3/8" (35mm) dial diameter
Precision gear-driven design with smooth, jeweled movement
Meet or exceed ISO accuracy specification
For extreme accuracy we recommend positioning the lever contact so that it is approximately 5°
from being horizontal with the workpiece.
Three dovetail positioning mounts work with existing test indicator accessories
Inch reading indicators are available with easy-to-read, shaded white, solid red, or solid black
dials - millimeter reading indicators with solid yellow dials
Contact point reverses automatically, always maintaining clockwise hand rotation
Narrow body for inreach ability
Satin chrome finish for durability
Long carbide contacts 3/6" (20mm) are furnished as standard.
Contacts are frictionally adjustable and replaceable

3460 Drill Gage $4.95


Ƚ /6" to /2" fractional size drill gage
Ƚ Quickly check drill sizes
Sturdy and lightweight plastic resists water, alcohol, oil, and grease.
Fits in shirt pocket (3-3/8" x 7-9/6" or 86 mm x 93 mm)

3552 Drill Gage, Starret A-Z Drill Sizes $47.00


Ƚ Starrett Standard Letter Size Drill Gage, A-Z range
Ƚ Starrett catalog number 98
Letter size drills can be quickly and conveniently checked with this gage. Twenty-six holes are
provided, giving corresponding drill sizes from "A" through "Z" with decimal equivalents from .234"
diameter through .43" diameter.
The gage is approximately 5/64" thick by 2 5/6" wide and 6 /4" long, is hardened and has a satin
finish. Thoroughly tested after hardening.

(800) 981 9663 LittleMachineShop.com Page 79


Precision: Measuring
3551 Drill Gage, Starrett Jobbers' 1/16-1/2" $52.00
Ƚ Starrett Jobbers' Drill Gage, /6-/2" Range
Ƚ Starrett catalog number 87
Using this gage, the size of any twist drill from /6-/2" by 64ths can be quickly determined. The
gage has a total of 29 holes, each marked with the drill size in inches and the decimal equivalent.
Gage is rigidly tested after hardening and has a black matte finish. Gage information is steel
stamped on one side and white marked on the reverse side for quick, clear reading. Approximately
5/64" thick by 2 5/6" by 6 /4" long.

3557 Drill Point Gage, Starrett $49.00


Ƚ Starrett Drill Point Gage, 59° Bevel, 32nds Grad
Ƚ Starrett catalog number 22C
Ƚ The head is beveled to 59° (the correct drill point angle)
Ƚ Graduated in 32nds along the 59° face for measuring the drill lips
This gage was designed specifically for use in drill grinding. It provides a quick, accurate way for
determining the correct drill point angle of 59° and the correct length of drill lips necessary for
clean-cut drilling at maximum feeds and speeds.
The sliding head may be adjusted to any position along the rule and locked by a thumb nut.
The head is beveled to 59° (the correct drill point angle), and is also graduated in 32nds along the
59° face for measuring the drill lips which should be of equal lengths.
The hook rule has accurate, machine-divided graduations in 8ths, 6ths, quick-reading 32nds and
64ths.
Hook is adjustable and can be shortened or extended on either side of the rule, and may also be
removed if desired.
Tool can also be used as a Plain Rule, Hook Rule, Depth Gage, and Slide Caliper. The No. 22D Head-
only will fit all steel rules 3/4" wide by 3/64" thick

2876 Electronic Digital Indicator, 0.5" $39.95


Ƚ Measurement range is 0-0.5"
Ƚ Resolution is 0.0005", accuracy is 0.002"
Ƚ Measures in inches or mm
Ƚ Set to zero at any position
There are three buttons; OFF for power, ZERO/ON to zero the display, and IN/MM to switch
between inches and millimeters. The indicator turns on automatically when the plunger moves.
Pressing ZERO/ON zeros the indicator at any position so you can make comparative readings
between two parts.

3167 Electronic Digital Indicator, 0.5" Starrett $150.00


Ƚ Starrett 0.5" digital electronic AGD Group 2 indicator
Ƚ Starrett catalog number 3600-5
Ƚ Range .500" (2.7mm)
Ƚ Resolution .0005" (.0mm)
Ƚ Reverse travel (± control indicates direction)
This electronic digital indicator features a large, easy to read LCD display.
You can set zero at any position and change the direciton that shows positive dimensions.
The indicator has a 3/8" shank and the tip thread is #4-48. The case has a mounting lug on the
back.

2521 Electronic Digital Indicator, 1" $59.95


Ƚ Measurement range is 0-"
Ƚ Resolution is 0.0005", accuracy is 0.002"
Ƚ Measures in inches or mm
Ƚ Set to zero at any position
Ƚ Relative and absolute measurement
There are three buttons; ON/OFF for power, RESET to zero the display, and R/A to switch between
absolute and relative measurement.
Pressing R/A zeros the indicator at any position so you can make comparative readings between
two parts. The absolute measurement is not lost, and is displayed by pressing R/A again.

(800) 981 9663 LittleMachineShop.com Page 80


Precision: Measuring
3092 Height Gage, Dial 12" $69.95
Ƚ Stainless steel with satin chrome finish
Ƚ Carbide tipped scriber for longer life
Ƚ Fine feed adjustment
Ƚ Positive lock screw

3181 Height Gage, Digital 6" Starrett $213.00


Ƚ Starrett 0-6" (0-50 mm) range digital height gage
Ƚ Starrett catalog number 375AZ-6/50
Ƚ Easy-to-read LCD with .32" high characters
Ƚ Linear Accuracy: �.00" (� 0.03mm)
Ƚ Resolution: .0005" (0.0mm)
Rounded nose scriber cuts clean, sharp lines
Easy-to-read LCD with .32" high characters
This digital height gage features Inch-millimeter conversion & zero at any position. It has a manual
ON/OFF button but will also turn off automatically after 5 minutes of nonuse.
The stainless steel bar is hardened for long life. The scriber can reference zero from the base
bottom.
It also has a slide lock & fine adjustment thumb roll, plus it features a hardened, ground, and
lapped base.

2880 Magnetic Base Indicator Holder $29.95


Ƚ Magnetic base indicator holder with one-knob lock
Ƚ Permanent magnet has an 80 kg (76 lb) holding force
Ƚ On/off switch makes it easy to position
Ƚ V-groove base allows you to mount it on cylindrical surfaces
This magnetic base indicator holder locks all its joints when the knob is tightened.
The on/off switch makes it easy to position. The V-groove base allows you to mount it on
cylindrical surfaces. The permanent magnet has an 80 kg (76 lb) holding force.
The lower arm is 0 mm long, the upper arm is 00 mm long.

1237 Magnetic Base Indicator Holder $12.95


Ƚ Magnetic base indicator holder with fine adjustment
Ƚ Permanent magnet has an 60 kg (30 lb) holding force
Ƚ On/off switch makes it easy to position
Ƚ V-groove base allows you to mount it on cylindrical surfaces
This magnetic base indicator holder has a fine adjustment feature.
The on/off switch makes it easy to position. The V-groove base allows you to mount it on
cylindrical surfaces. The permanent magnet has an 60 kg (30 lb) holding force.

2029 Magnetic Base Indicator Holder (Mini) $24.95


Ƚ This magnetic base is smaller than most
Ƚ Unique central locking mechanism locks all motion with one knob
Ƚ On/off switch makes it easy to position
Ƚ V-groove base allows you to mount it on cylindrical surfaces
Ƚ Base is .2" by .5". Maximum reach 7".
This magnetic base is the perfect size for mini lathes and mini mills.
It accepts dial indicators with 3/8" stems and dial test indicators with dovetails.

3714 Magnetic Base Indicator Holder, Professional Quality $21.95


Ƚ Z-Limit brand guarantees professional quality
Ƚ Magnetic base indicator holder with fine adjustment
Ƚ Permanent magnet has an 65 kg (45 lb) holding force
Ƚ On/off switch makes it easy to position
Ƚ V-groove base allows you to mount it on cylindrical surfaces
This magnetic base indicator holder has a fine adjustment feature.
The on/off switch makes it easy to position. The V-groove base allows you to mount it on
cylindrical surfaces. The permanent magnet has an 66 kg (45 lb) holding force.

(800) 981 9663 LittleMachineShop.com Page 81


Precision: Measuring
3549 Magnetic Base Indicator Holder, Starrett $152.00
Ƚ Starrett Magnetic Base with Attachments
Ƚ Starrett catalog number 657AA
Ƚ Powerfull magnetic base holds firmly to steel and iron surfaces
Ƚ Push button turns magnet on or off for quick, one-hand set-up
For use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also
accommodates similar indicators of other manufacturers.
A. No. 657P Magnetic Base.  5/6 x  5/8 x  7/8" (50 x 40 x 48mm). Push-button on/off switch
for one-hand operation. Base has three precision ground, magnetic contact points. Grips
horizontally, vertically, and upside down. V-step holds base to arbors, shafts, etc. Base has extra
/4-20 tapped hole on one side for mounting post. Black wrinkle finish on non-working surfaces.
B. No. 657G Upright Base Post. 3/8" (9.5mm) diameter x 7 7/6" (90mm) length overall. Starrett
No. 57S and No. 58S Universal Snugs may also be used.
C. No. 657S Snug. Two /4" (6.3mm) diameter holes. Adapts Nos. 96, 650, and 65 Series Dial
Indicators and No. 657Y Indicator Attachment to No. 657X Rod.
D. No. 657X Rod. /4" (6.3mm) diameter x 6" (50mm) long. Accommodates Starrett Nos. 708, 709,
8 and 7F Series Dial Test Indicators and No. 657S Sleeve.
E. No. 657Y Indicator Attachment. /4" (6.3mm) O.D. one end, other end threaded and fits lug
backs of all AGD indicators (Starrett Series Nos. 8, 25, 655, 656) and Series No. 80 Miniature
Indicators.
F. No. PT8724 Snug 3/8" (9.5mm) diameter post hole. /4" (6.3mm) diameter gripping hole
accommodates No. 657X Rod.

3170 Magnetic Base Indicator Holder, Starrett $109.00


Ƚ Magnetic base with triple-jointed arm and fine adustment
Ƚ Starrett catalog number 660
The compact and versatile No. 660 Magnetic Base Indicator Holder has three adjustable pivots
controlled by a single knob for fast, easy indicator positioning.
Small but powerful magnetic base, with 70 lbs. (320 N) holding force
Positive On/Off switch
Base Dimensions:  3/6 x  9/6 x  3/8" (30 x 40 x 35mm)
Horizontal and vertical mounting positions
Will hold any indicator with a 3/8" (9.5mm) stem or standard dovetail mount
Articulating arm with powerful central locking knob provides full 360° horizontal positioning and
over 80° vertical positioning
Maximum horizontal reach: 4.750" (20mm)
Maximum vertical reach: 7.500" (90mm)
Very sensitive fine-adjustment thumb screw

3072 Magnetic Test Indicator Holder $49.95


Ƚ Overall height 3.75"
Ƚ Powerful permanent magnet
Ƚ Clamps on dovetail, 5/32", or /4" diameter stems
Ƚ Includes stem adapter and mill adapter

3611 Micrometer, 0-0.6" $15.95


Ƚ 0.00" graduations on satin chrome finish
Ƚ Great for checking small parts and working in tight quarters
Ƚ Forged steel frame
Ƚ Anvil and spindle are hardened and precision ground
Ƚ Includes a fitted case

(800) 981 9663 LittleMachineShop.com Page 82


Precision: Measuring
1845 Micrometer, 0-1" Digital, Starrett $189.00
Ƚ Starrett 0-" Electronic Digital Micrometer
Ƚ Starrett catalog number 3734XFL-
Action Features: ON/OFF button - also automatic OFF after 30 minutes of nonuse. Instant
inch/millimeter conversion. Measurement HOLD button. Ability to zero tool at any position.
Readability Features: Large, right-sized, high-contrast LCD digital readout is easy to read and
reduces errors. Conventional inch or millimeter graduations standard. Attractive no-glare black
wrinkle finish on the frame. Starrett no-glare satin chrome finish on thimble and sleeve.
Ease-of-Handling Features: Balanced frame design for comfortable and accurate measuring. Ring-
type knurled lock nut for quick and sure locking. Smooth friction thimble for uniform pressure.
Gracefully designed tapered frame for use in narrow slots and tight places.
Accuracy and Long-Life Features: Extremely hard and stable one-piece spindle (the heart of our
accuracy). Micro-lapped carbide measuring faces. Starrett designed electronic microprocessor.
One battery furnished for dependable power and over one year’s normal usage. Automatic OFF
after 30 minutes of nonuse. Starrett workmanship.

3180 Micrometer, 0-1" Starrett $142.00


Ƚ Starrett 0-" micrometer
Ƚ Starrett catalog number T230XRL
Ƚ Accurate to 0.000"
This is the jewel of precision micrometers used by skilled workmen worldwide.
The spindle and anvil are sized at .235" (6mm) to reach places most micrometers cannot reach.
The balanced frame and thimble design insure easy handling and better readability. A ring-type
knurled lock nut provides quick and sure locking. The combination ratchet and speeder provides
uniform pressure and quicker adjustment. A gracefully designed tapered frame allows use in
narrow slots and tight places.
The micromenter has a rigid one-piece frame of drop forged steel and an extremely hard and
stable one-piece spindle (the heart of the accuracy). It features micro-lapped measuring faces,
quick and easy adjustment, plus Starrett workmanship.

2520 Micrometer, Electronic Digital $69.95


Ƚ Measurement range is 0-"
Ƚ Resolution is 0.00005"
Ƚ Protected from dust and water to IP54 per IEC529 standard
Ƚ Large LCD display
Ƚ Rugged plastic case
This digital electronic micrometer with carbide measuring faces has a resolution of 0.00005".
There are three buttons; ON/OFF, SET to zero the display, and ABS/INC to switch between
absolute and incremental measurement. The micrometer turns itself off after about 5 minutes of
inactivity.
Pressing ABS/INC zeros the micrometer at any position so you can make comparative readings
between two parts. The absolute measurement is not lost, and is displayed by pressing ABS/INC
again.
The IP54 code says that dust shall not penetrate in a quantity to interfere with satisfactory
operation of the device or to impair safety, and water splashed against the device from any
direction shall have no harmful effects.

1642 Mini Magnetic Indicator Holder $4.95


Ƚ Magnetic indicator holder
Ƚ 5 positions for mounting accessories
Ƚ Magnet has 45 pounds of holding force

1962 Pee Dee Thread Measuring Wires $21.95


Ƚ Made in the USA by hungry machinists
This set of thread measuring wires includes 48 wires of 6 different diameters.
You can measure threads from 3 to 48 threads per inch, and metric threads from 0.5 mm to 6 mm
pitch. You can also measure Acme threads from 3 to 6 threads per inch.
The thread measuring wires come with thread charts and are furnished with a quality vinyl case.
This is a quality American-made product from Fisher Machine Shop. These are the original Pee Dee
brand thread measuring wires.

(800) 981 9663 LittleMachineShop.com Page 83


Precision: Measuring
3720 Pin Gage Set, 0.061" to 0.250" Minus $59.95
Ƚ 90 2" long pin gages
Ƚ Each pin is up to 0.0002" under the marked size
Ƚ Hardened to 60-62 Rc
Ƚ Finished to 0 microinches
Ƚ Furnished in a sturdy plastic case with sizes marked
These pin gages provide one of the best ways of measuring hole diameters. They can also be used
to measure the distance between holes and for go/no go gaging..
This set includes 90 pin gages, one for each 0.00" from 0.06" to 0.250". Each of the pin gages
are individually marked with their respective sizes.
3879 Pin Gage Set, 0.011" to 0.060" Minus $29.95

3556 Protractor, Rectangular Head, Starrett $66.00


Ƚ Starrett steel protractor (0-80°), 6" blade, rectangular head
Ƚ Starrett catalog number C83
Ƚ Double graduations from 0-80° in two directions
Ƚ The blade can be locked firmly at any angle by the lock nut
Ƚ Satin chrome finish for ease of reading and resistance to rust
This is a highly useful and accurate tool for setting bevels, transferring angles, small squaring
tasks, checking cutter clearances within certain limits, and many other applications.
Double graduations from 0-80° in opposite directions permit the direct reading of angles and
supplementary angles.
The back of the tool is flat for ease of use.

2749 Protractor, Round Head, PEC $17.95


Ƚ Measures angles from 0 to 80°
Ƚ Semi-circular head is 3.3" x 2"
Ƚ 6" arm can be locked in any position with knurled lock nut
Ƚ Made of tempered steel with satin chrome finish
Protractor made in the US by Products Engineering Corporation (PEC).
Protractors are used for drawing radial lines, transferring angles, setting bevels, and setting tapers.
2750 Protractor, Rectangular Head $10.50
2748 Protractor, Rectangular Head, PEC $17.95
2751 Protractor, Round Head $10.50

2878 Radius Gage Set $19.95


Ƚ Set of 25 radius gages and holder
Ƚ /64" to 7/64" radius by 64ths
Ƚ 9/32" to /2" by 32nds
Ƚ Satin chrome finish
Ƚ Five gaging surfaces on each gage for both concave and convex radii
The radius gage set is furnished in a vinyl case for storage.

1842 Radius Gage Set, Starrett $142.00


Ƚ Starrett 25 piece radius gage set
Ƚ Starrett catalog number S67CHZ
Ƚ Radii Range: /64-7/64" 9/32-/2"
Ƚ Increments: 64ths, 32nds
Radii or fillets can be checked or laid out easier, faster, and more accurately with Starrett radius
gages.
Each set is furnished in an attractive case which provides complete protection and easy, instant
selection of the right gage size for the job.
Gage Features: Made of satin finish stainless steel - rust and stain resistant. Each gage is clearly
marked with its radius. Each gage has five different gaging surfaces for both convex and concave
radii. All gages have precision finished radii with extra smooth, accurate edges.
Gage Holder Features: Any gage can be used with the Starrett No. 0 holder which is especially
useful for checking radii in confined or hard-to-reach locations. Two slots are provided in the
holder permitting gages to be held at 30° or 45°, either square in the slot or tipped to one side.
The holder is 4" (00 mm) long, providing good reach and balance.

(800) 981 9663 LittleMachineShop.com Page 84


Precision: Measuring
3029 Screw Checker, Inch PEC $13.95
Ƚ # to 5/6" thread sizes
Ƚ Quickly identify unified and American threads
Ƚ NC, NF, and NS threads
Ƚ Made in USA
Screw checkers provide a quick way to measure standard threads. They provide all the information
you need for screws; diameter, length, threads per inch, hole size and even tap drill sizes.
3031 Screw Checker, Large Metric PEC $15.25
3030 Screw Checker, Small Metric PEC $13.95

3461 Screw Checker, Plastic $4.95


Ƚ #0 to 3/4" coarse & fine threads
Ƚ .6 mm to 6mm metric threads
Ƚ Tap drill sizes on back
Sturdy and lightweight plastic resists water, alcohol, oil, and grease.
Fits in shirt pocket (3-3/8" x 6-5/8" or 86 mm x 68 mm)

3176 Screw Pitch Gage, Inch 51 Leaves Starrett $63.00


Ƚ Starrett screw pitch gage with 5 leaves
Ƚ Starrett catalog number 472
Ƚ Measures 60° threads from 4 threads per inch to 84 threads per inch
Starrett screw pitch gages are among the most useful tools in any mechanic's toolbox. They quickly
determine the pitch of various threads. These gages consist of a substantial steel case with a
number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch,
marked on each leaf. Starrett screw pitch gages are available in a wide range of sizes with
different numbers of leaves in various pitch ranges with which to gage. The screw pitch gage
features a locking device at both ends of the case, so leaves can be securely locked in position for
use. Leaves have a special narrow design, permitting checking internal threads in nuts, etc., as
well as external threads.
1834 Screw Pitch Gage, Inch 30 Leaves, Starrett $33.00
2617 Screw Pitch Gage, Metric 28 Leaves Starrett $35.00

2744 Screw Pitch Gage, Inch PEC $29.95


Ƚ Screw pitch gage with 5 leaves. Measures 60° threads from 4 threads per inch to 84 threads per
inch
Ƚ Narrow blades permit use for internal and external screw threads
Ƚ Each blade clearly marked with thread size
Ƚ Blades are protected in sturdy steel case
Ƚ Locking device secures all blades for storage or positions an individual blade for use
Screw pitch gage made in the US by Products Engineering Corporation (PEC).
The correct pitch is determined by engaging the blade teeth with the threads you are measuring.
This screw pitch gage measures the following screw pitches: 4, 4-/2, 5, 5-/2, 6, 7, 8, 9, 0, ,
-/2, 2, 3, 4, 5, 6, 8, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52,
54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, and 84 threads per inch.
2746 Screw Pitch Gage, Inch/Metric PEC $15.95
2745 Screw Pitch Gage, Metric PEC $15.95

3093 Small Hole Gage Set, 4-Piece $12.95


Ƚ 4 small hole gages with 0.25" to 0.500" range
Ƚ Full spherical ball for very accurate measurements
Ƚ Hardened, satin-chrome plated measuring faces
Ƚ Furnished in plastic pouch

(800) 981 9663 LittleMachineShop.com Page 85


Precision: Measuring
3545 Small Hole Gage Set, 4-Piece Starrett $121.00
Ƚ Starrett 4- piece small hole gage set
Ƚ Starrett catalog number S829EZ
Ƚ Range of 0.25-0.500" (3.2-2.7 mm)
Ƚ Hardened-ball measuring surface with two-point contact
Ƚ Smooth, sensitive adjustment for better feel, giving more accurate measurements
These small hole gages are well balanced tools that are ideal for accurately measuring small holes,
slots, grooves, and recesses in all kinds of work.
The radius on each gage is less than the minimum diameter to be measured, which provides the
two-point contact necessary for maximum accuracy.
They have smooth, sensitive adjustment for better feel, giving more accurate measurements. The
adjustment of the gage beyond their range is restricted by a safety stop that prevents breakage
Accurate measurements are obtained by slightly "rocking" these gages in the hole to be measured.
This will guarantee contact at the true diameter. The final size is then obtained by measuring over
the ball contacts with a micrometer.
Furnished in a vinyl pouch.

1234 Steel Rule, 6" $4.95


Ƚ 4R graduations, 8ths & 6ths, 32nds & 64ths
Ƚ Hardened stainless steel
This precision, 6" long steel rule is flexible to fit into tight spots. The etched black graduations are
easy to read against the non-glare finish.

Steel Rules, PEC


Ƚ Made from the finest quality steel available
Ƚ Fully hardened and tempered with stain chrome finish
Ƚ Precisely etched, then black filled for readability
Ƚ Flexible rules are /2" wide and 0.05" thick
Ƚ Rigid rules are 3/4" wide and 0.040" thick
2730 Steel Rule, 12" 4R Flexible, PEC $14.50
2735 Steel Rule, 12" 4R Rigid, PEC $15.95
2732 Steel Rule, 12" 5R Flexible, PEC $14.50
2733 Steel Rule, 150 mm / 6" Flexible, PEC $7.50
2736 Steel Rule, 150 mm / 6" Rigid, PEC $7.95
2729 Steel Rule, 6" 4R Flexible, PEC $7.50
2734 Steel Rule, 6" 4R Rigid, PEC $7.95
2731 Steel Rule, 6" 5R Flexible, PEC $7.50

Steel Rules, Starrett


Starrett precision steel rules are machine-divided, not photoengraved. They are inspected to
Starrett Master Standards, which are traceable to the National Institute of Standards and
Technology.
Graduation No. 4R are 8ths, 6ths, quick-reading 32nds and 64ths.
Graduation No. 6R are Quick-reading 32nds and 64ths, aircraft quick-reading 50ths and 00ths.
Graduation No. 5R are quick-reading 0ths, aircraft quick-reading 00ths, 32nds and 64ths.
Graduations No. 3 are 32nds and 64ths on one side; mm and /2 mm on reverse.
Flexible rules are /2" wide and /64" thick.
Rigid rules are 3/4" wide and 3/64" thick.
3175 Steel Rule, 12" 5R Flexible, Starrett $39.00
1828 Steel Rule, 150 mm 31 Flexible, Starrett $20.50
1826 Steel Rule, 6" 4R Flexible, Starrett $18.00
2233 Steel Rule, 6" 4R Rigid, Starrett $19.50
1827 Steel Rule, 6" 5R Flexible, Starrett $19.50

(800) 981 9663 LittleMachineShop.com Page 86


Precision: Measuring
3550 Tap and Drill Gage, Starrett "Time Saver" $56.00
Ƚ Starrett hardened tap and drill gage
Ƚ Starrett catalog number 85
Ƚ Drill sizes number -60 (0.228-0.040")
This highly useful gage shows at a glance the correct size tap drill for any common size machine
screw tap in "NF" National Fine or "NC" National Coarse Thread Series, that will leave the right
amount of stock for approximately 65% full thread. The gage also shows the correct body size drill
to use. In addition, there are 60 holes marked with the number size and decimal equivalent of the
drill that fits each hole. Example: a size 2-56 tap (No. 2 tap with 56 pitch) calls for a No. 50 tap
drill and a No. 44 body drill.

The gage has a black matte finish with information steel stamped on one side and white marked on
the reverse side for quick, clear reading. The gage is thoroughly tested for accuracy after
hardening. Approximate size, 5/64" thick by 2 5/6" wide by 6 /4" long.

1840 Telescoping Gage Set, 4-Piece Starrett $121.00


Ƚ Starrett telescoping gage set
Ƚ Starrett catalog number S579GZ
Ƚ Range: Four gages, 5/6" to 2-/8"
Starrett telescoping gages are used for determining the true size of holes, slots, and recesses up to
2-/8" (54 mm). The ends of both contacts are hardened and ground to a radius to allow proper
clearance on the smallest hole the gage will enter. These tools must be slightly "rocked" in the
hole being measured to ensure that the tool is on the proper diameter before it is locked and
withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer.
The No. 579 Series telescoping gages have handles that are rigidly attached to the contact
plungers and are automatically self-centering. Also, the No. 579 gages have two telescoping
contacts.
The handles are approximately 2-3/8" (60 mm) long.
Constant spring tension gives uniform contact pressure and both plungers are easily locked at any
desired setting.
2959 Telescoping Gage Set, 6-Piece Starrett $209.00

3185 Telescoping Gage Set, 4-Piece, PEC $49.95


Ƚ For measuring holes, slots and recesses
Ƚ Measures holes from 5/6" to 2 /8" diameter
Ƚ Double action is self-centering
Ƚ Satin chrome finish
Ƚ Contact ends are hardened and ground
Use telescoping gages to measure ID, deep holes, recesses, slots, grooves, and other hard to reach
places.
Measure the actual size or lock the self-centering plungers to a known size for a go-no go gage.
The photo shows the 6-piece set. This set has the smaller 4 gages.
3184 Telescoping Gage Set, 6-Piece, PEC $70.95

2879 Telescoping Gage Set, 6-Piece $12.95


Ƚ For measuring holes, slots and recesses
Ƚ Measures holes from 5/6" to 6" diameter
Ƚ Double action is self-centering
Ƚ Satin chrome finish
Ƚ Contact ends are hardened and ground to the radius of the smallest diameter

1251 Test Indicator Holder $9.95


Ƚ Clamping diameter of -7/8"
Ƚ Length from the center of the clamp to the indicator can be up to 6-/2"
Ƚ Clamps to the outside of an end mill holder and does not disturb the working tool
This test indicator holder has a clamping diameter of -7/8". The length from the center of the
clamp to the indicator can be up to 6-/2".
The test indicator clamps to the outside of an end mill holder and does not disturb the working
tool.

(800) 981 9663 LittleMachineShop.com Page 87


Precision: Measuring
3771 Test Indicator Holder, Professional Quality $17.95
Ƚ Z-Limit brand guarantees professional quality
Ƚ Clamping diameter of -7/8"
Ƚ Length from the center of the clamp to the indicator can be up to 6-/2"
Ƚ Clamps to the outside of an end mill holder and does not disturb the working tool
This test indicator holder has a clamping diameter of -7/8". The length from the center of the
clamp to the indicator can be up to 6-/2".
The test indicator clamps to the outside of an end mill holder and does not disturb the working
tool.

2452 Universal Back-Plunger Dial Indicator, Starrett $201.00


Ƚ Starrett Back-Plunger Dial Indicator
Ƚ Starrett catalog number 96AZ
Ƚ 0-00 with 3 Contact Points, Adapter, 4 Attachments in Case
Ƚ Accurate and reliable
Ƚ Rugged, with few moving parts
The Starrett No. 96 Indicator is one of the most versatile indicators available, and it is the
"granddaddy" of them all. Over the years this tool has been improved by methods and materials but
the basic design is unchanged. The design is older than most of you and has withstood the test of
time and beaten all challengers because it is:
Accurate and reliable
Simple to operate
Rugged, with few moving parts
Smooth in operation
Inexpensive - the best indicator value you can buy
This indicator with graduations to .00" will handle by far the majority of jobs. Shank diameter is
/4" (6.3 mm).
For full use, first choose the proper contact from the three hardened contact points that are
included. Then the contact is brought against the work with enough pressure to give the hand one
full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full
rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the
amount of that variation.

Precision: Sets
2925 Dial Indicator, Test Indicator, Magnetic Base & Point Set $54.95
Ƚ 0-" dial indicator with 0.00" resolution
Ƚ 0-5-0 dial test indicator with 0.0005" resolution
Ƚ Magnetic base indicator holder with fine adjustment
Ƚ 22 piece indicator point set
Ƚ All in a plastic case
The " stroke dial indicator features large, easy to read numbers and crisp graduations. Each
revolution is 0.00", indicated by the revolution counter. The resolution is 0.00". There is a
mounting lug on the back of the case.
The dial test indicator has 0.0005" graduations and a 7 jewel movement. Its range is 0.030" in
either direction. Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an
0.080" diameter point.
The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy
to position. The v-groove base allows you to mount it on cylindrical surfaces.
Includes a 22 piece indicator point set and a plastic case.

3073 Electronic Indicator, Electronic Caliper, and Magnetic Base Set $89.50
Ƚ 0-" Electronic digital Indicator, 0.00" resolution, 0.00" accuracy
Ƚ 0-6" Electronic digital caliper, 0.0005" resolution, 0.00" accuracy
Ƚ Magnetic base with fine adjustment
Ƚ Includes fitted case
Ƚ PEC Tools brand
There are three buttons on the indicator and caliper; ON/OFF for power, ZERO to zero the display,
and INCH/MM to switch between display of inches and mm.

(800) 981 9663 LittleMachineShop.com Page 88


Precision: Sets
2518 Inspection Kit, 6-Piece $59.95
Ƚ " Dial indicator, magnetic base and point set
Ƚ 0-30-0 Dial test indicator
Ƚ 0-" micrometer
Ƚ 6" Dial caliper
Ƚ Plastic case
This set includes all the basic precision measuring tools.
The micrometer has a range of 0-" and a resolution of 0.000". An adjustment wrench is included.
The dial caliper has a range of 0-6" and a resolution of 0.00".
The dial test indicator has a range of 0.030" in either direction and a resolution of 0.0005". It
includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter
point.
The dial indicator has a range of 0-" and a resolution of 0.00". Each revolution is 0.00",
indicated by the revolution counter. There is a mounting lug on the back of the case.
The magnetic base has on on-off switch for the magnet and incorporates a fine adjustment
feature.
The point set includes 22 of the most popular points. All have #4-48 threads for use in AGD ,2,3,
and 4 indicators.

1260 Measurement Starter Kit with Digital Caliper $39.95


Ƚ 6" electronic digital caliper
Ƚ 6" steel rule
Ƚ " stroke dial indicator
Ƚ Magnetic base indicator holder
Ƚ Starrett Tools & Rules for Precision Measuring booklet
This kit includes the basic measurement tools you need for the mini mill, mini lathe or other small
machines.
The magnetic base includes a fine adjustment.
1259 Measurement Starter Kit with Dial Caliper $29.95

1248 Micrometer Set, 0-3" $29.95


This 0-3" micrometer set features carbide faces and clear 0.000" graduations on a satin-chrome
finish. The frames are forged steel. " and 2" standards are included, as well as adjusting wrenches.
The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the
barrel.
The micrometers come in a fitted case.
2877 Micrometer, 0-1" $9.95

3663 Micrometer Set, 0-6" $119.95


Ƚ Solid metal C-shape frame for all sizes
Ƚ Graduation: 0.000”
Ƚ Hardened and precision ground anvil spindle thread with microlap finish on ends
This 0-6" micrometer set features carbide faces and clear 0.000" graduations on a satin-chrome
finish. The frames are forged steel. " through 6" standards are included, as well as adjusting
wrenches.
The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the
barrel.
The micrometers come in a fitted case.

Precision: Setup
2552 Adjustable Parallel Set $29.95
Ƚ Made of precision ground tool steel
Ƚ Easily expanded to size in openings for quick reference measurements
Ƚ Lock desired size by set screws provided
Ƚ Exact size can be set with micrometer
Ƚ Furnished in fitted plastic case with size range markings
Six piece adjustable parallel set.
Parallels are adjustable to the following sizes: 3/8” - /2”, /2” - /6”, /6” - 5/6”,
5/6” - -5/6”, -5/6” - -3/4”, -3/4” - 2-/4”.
The parallels are 5" long and /4" thick.

(800) 981 9663 LittleMachineShop.com Page 89


Precision: Setup
2553 Angle Block Set $29.95
Ƚ Simple, quick angle set ups
Ƚ Manufactured of hardened, stabilized and ground steel
Ƚ Accurate to ±0.000” per inch
Ƚ Fitted case
Ƚ Angle blocks are 3" long and 0.25" thick
Ten piece angle block set.
The angles included are °, 2°, 3°, 4°, 5°, 0°, 5°, 20°, 25°, 30°. You can combine them to make
any integral angle.

3431 Angle Plate, 3" Slotted & Webbed $13.95


Ƚ 3" long, 2.5" tall, and 2" wide
Ƚ Accurately machined and ground square and parallel on outside and ends
Ƚ Slots provide many options for mounting
Ƚ widely used for machining, layout and inspection
Ƚ High tensile cast iron is properly seasoned to prevent distortion
3432 Angle Plate, 4.5" Slotted & Webbed $17.95

1233 Blocks, 1-2-3 $12.95


These precision -2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are
" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002".
Each set includes two matched blocks.
The blocks have 23 holes through them, 5 are threaded 3/8-6 NC.
3666 Blocks, 2-4-6 $94.95

2881 Blocks, 1-2-3 Ultra Precision $29.95


These ultra precision -2-3 blocks are ground and case hardened on all sides to 55-60 Rc. They are
parallel within 0.000", flat within 0.000" and square within 0.000". They are up to 0.0003"
oversize for lapping.
Each set includes two matched blocks.
The blocks have 23 holes through them, 5 are threaded 3/8-6 NC.
Set includes a matched pair of -2-3 blocks, 5 3/8-6 x .5" socket head cap screws and an
appropriately-sized hex wrench. Furnished in a fitted case.

2907 Machinist's Jack Set $14.95


Ƚ Machinist's jack
Ƚ Two extension bases
Ƚ Auxiliary pointed screw
Ƚ Inner and outer V bases
Machinist's jacks are used to support odd sized or odd shaped objects. Use them to support the
ends of long workpieces that extend beyond your vise jaws. Use them to support the edges of
items that you are clamping with your clamping kit.
The machinist's jack includes lots of parts that you can mix and match to meet your needs.

3525 Sine Bar, 5" $29.95


Ƚ Working face accurate to 0.00003" per inch of length
Ƚ 5.00" center distance of rolls accurate to 0.0002"
Use a sine bar and space blocks to set or measure extremly accurate angles.
The -2-3 block is not included.
3760 Sine Bar, 100 mm SALE $19.95
3535 Sine Bar, 2.5" $33.00

1893 Thin Parallels, 3" Long 10 Pairs $29.95


Ƚ Set of ten pairs of thin parallels in a fitted case
Ƚ Parallels are /8" thick and 3" long
Ƚ Heights are /2", 5/8", 3/4", 7/8", ", -/8", -/4", -3/8", -/2", and -5/8"
Ƚ Made of high grade alloy steel hardened to 52 to 58 Rc
Ƚ Parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"
These 3" long thin parallels are great for the small vises used on the mini mill.
2924 Thin Parallels, 3" Long 4 Pairs $14.95
1232 Thin Parallels, 6" Long 10 Pairs $29.95

(800) 981 9663 LittleMachineShop.com Page 90


Precision: Setup
2220 Thin Parallels, 3" Long 10 Pairs Ultra-Precision $94.95
Ƚ Set of ten pairs of thin parallels in a fitted case
Ƚ Parallels are /8" thick and 3" long
Ƚ Heights are /2", 9/6", 5/8", /6", 3/4", 3/6", 7/8", 5/6", ", -/6"
Ƚ Made of A2 tool steel hardened to 57 to 59 Rc
Ƚ Parallel within ±0.000" on the top and bottom. The pairs are matched in height within ±0.000"
These 3" long thin parallels are great for the small vises used on the mini mill.
These thin parallels were made in the USA for us by the A. R. Warner Co.
This set of /8" thin parallels contains 0 pairs of parallels that step in /6" increments. This gives
you more sizes you can use in our small vises.
These parallels do not have holes in them.

2923 Ultra Thin Parallels, 6" long $29.95


Ƚ Set of 20 pairs of ultra thin parallels in a fitted case
Ƚ Parallels are /32" thick and 6" long
Ƚ Heights are /2" to -/6" in /6" steps
Ƚ Made of high grade alloy steel hardened to 50 Rc
Ƚ Parallel within 0.000" on the top and bottom. The pairs are matched in height within 0.000"
The heights of the parallels are /2", 9/6", 5/8", /6", 3/4", 3/6", 7/8", 5/6", ", -/6", -
/8", -3/6", -/4", -5/6", -3/8", -7/6", -/2", -9/6", -5/8", and -/6".

1794 V-Blocks, 1-1/4" x 1-1/4" x 1-5/8" $39.95


These precision V-blocks are made of hardened steel.
They are ground square, parallel and concentric within 0.000".
The V-blocks are supplied in matched pairs.

3718 V-Blocks, Miniature 0.03" to 0.28" Capacity $98.95


Ƚ Hold miniature round parts in these small V-blocks
Ƚ Bridges straddle long workpieces allowing use of hold-down screw of containing V-block
Ƚ Hardened and precision ground
Ƚ Square and parallel to 0.0002"
Ƚ Includes fitted case
These little V-blocks, held in larger V-blocks, provide a unique and universal way to hold small and
intircate parts.
Set includes two V-blocks, one with a 0.030" to 0.5" capacity and one with a 0.05" to 0.28"
capacity. Also are two bridges and five upper prisms providing /8", 5/32", & 3/6" capacity.

Project Plans: Boats


2515 Buffalo Pup Steam Tug Boat Plans $25.00
Ƚ Radio controlled 36" model tug boat runs on live steam
Ƚ Build the 2 cylinder steam engine from bar stock
Ƚ Build the copper boiler
Ƚ Build the boat, including propeller and rudder
Ƚ Install the radio control
Complete plans to build a steam driven, radio controlled model of a tug boat.
These plans were created by Bill Reichart.
There are 30 pages of plans that cover building the boat including, building the boiler out of
copper, and building the steam engine out of bar stock, and building the deck and cabin out of
wood. The hull is fiberglass.
Sources are provided for all purchased parts including propane, the ceramic burner, and the
fiberglass hull.

(800) 981 9663 LittleMachineShop.com Page 91


Project Plans: Conversions
Project Plans: Conversions
2395 Mini Lathe CNC Plans $49.95
Plans to add CNC to a mini lathe.
These plans were created by Ronald J. Steele.
This is a complete set of plans to add CNC to a mini lathe. They include a materials list with
sources, plans for all the parts, and instructions for making the parts and installing them on the
mini lathe.
Changes to the original machine are minimal. Three drilled and tapped holes are put into the tail
end of the lathe bed to hold the Z axis lead screw thrust washer seat/motor mount plate. The
remaining motion control parts are either attached via existing holes or clamped onto the machine.
Project completion time is 30 to 40 hours. Cost for mechanical hardware and materials is between
$80 and $220. The plans provide several sources for the electrical parts and software.

2353 Mini Mill CNC Plans $49.95


Plans to add CNC to a mini mill.
These plans were created by Ronald J. Steele.
This is a complete set of plans to add CNC to a mini mill. They include a materials list with
sources, plans for all the parts, and instructions for making the parts and installing them on the
mini mill.
The only permanent change made to the mini mill is to drill and tap two holes.
Ron Steele says the cost of the hardware and materials, assuming you need to purchase
everything, is about $60. The plans provide sources for all these items. The plans also provide
several sources for the electrical parts and software. One kit includes software, 45 oz/in stepper
motors, and a pre-wired boxed controller and sells for $645. It takes between 20 and 30 hours to
machine the parts and bolt it all together.

Project Plans: Engines


2342 Elbow Engine Plans $11.00
Complete plans to build a unique 5-cyliner steam engine.
These plans were created by Bill Reichart.
This steam engine has 0 pistons and no crankshaft. The plans include six pages of detailed
drawings and construction notes. The engine is made from bar stock. No castings are required.

2340 Epicyclic Steam Engine Plans $21.00


Complete plans to build an epicyclic steam engine.
These plans were created by Bill Reichart.
This engine uses a unique set of epicyclic gears where one gear revolves around another gear.
There are 33 pages of plans that detail every part and describe methods of production. The engine
is made from bar stock. No castings are required.

2341 Panther Pup Engine Plans $22.00


Complete plans to build a 4-cylinder, 4-cycle gasoline engine.
These plans were created by Bill Reichart.
The Panther Pup is an air-cooled internal combustion engine. There are 54 pages of plans, bound
in a saddle-stitched booklet. The plans include detailed drawings of each part along with complete
construction notes.
Two castings are required. Plans are included to make your own patterns, or castings can be
purchased from LittleMachineShop.com.
2355 Panther Pup Engine Castings, Aluminum $106.95
2354 Panther Pup Engine Castings, Brass $209.95

2343 Pip-Squeak Engine Plans $8.00


Complete plans to build a simple steam engine.
These plans were created by Bill Reichart.
The Pip-Squeak was designed to be a very first, easy to build engine. It is build from bar stock. No
castings are required. It can be made on a small hobby lathe and a small drill press. A small milling
machine helps, but isn't necessary.

(800) 981 9663 LittleMachineShop.com Page 92


Project Plans: Engines
2295 Stirling-Steele Engine Plans $25.00
Complete plans to build a four-cylinder Stirling cycle engine from bar stock and commercial
components.
These plans were created by Ronald J. Steele.
The package contains 26 pages of highly detailed drawings and instructions providing all the
necessary information to produce this modern compact version of a Stirling engine. The Stirling-
Steele engine can be machined on a 6" lathe and small milling machine from readily available
material. A full bill of materials is included as are assembly instructions. This is not a kit but a
full set of dimensioned drawings.

Project Plans: Tools


2717 Belt Grinder Plans $49.95
Ƚ 7 pages of plans
Ƚ 8 pages of instructions
Ƚ 2" x 72" belt stays sharp longer and cuts cooler than shorter belts
Ƚ Use for roughing, shaping, contouring of flat or angular stock
Plans for a commercial-grade square wheel belt grinder. Machines like this sell for over $000.
This project consists of 7 pages of drawings and 8 pages of well written instructions. The
drawings are printed on  x 7 paper, making them easy to read. Every aspect of this project has
been explained and detailed, including 3 dimensional assembly drawings to show you where
everything goes.
Although this machine would feel right at home in a professional metal worker's shop, the average
home shop machinist will also find endless uses for this grinder. Use it for deburring, sharpening
drill bits, dressing mushroomed punches, and grinding HSS lathe tool bits.
Although this project is not for a beginner, it was designed with the home shop machinist in mind.
Anyone with modest equipment can complete this high performance machine. The prototype was
built primarily with a 7" lathe, a drill press, and a MIG welder.

2304 Rike-Vise Plans $7.00


The Rike-Vise was invented by Bill Reichart. This simple tool is especially designed for the home
machine shop. For many jobs it will replace a standard vise. The Rike-Vise is described as two 90°
angle plates joined at the corner, and providing a foot so it can be easily clamped to a machine
table or a lathe faceplate. The square donut piece provides an accurate clamp to secure a work
piece in the base. It is made of mild steel. The plans include tips on accurately building the vise,
plus details on using it.
The plans comprise six 8-/2" x " pages. The plans include information on building and using the
Rike-Vise.
Features of the Rike-Vise:
At the lathe you can turn square stock round or drill square stock perfectly concentric.
You can also do the same to rectangular stock, and drill or turn it in the exact center or to one
side, as you desire.
The vise holds work perpendicular for drilling at your drill press.
At the milling machine, you can mill an end perfectly square, or notch or groove perfectly parallel
to the sides.
It holds stock perpendicular for use at the surface grinder.

(800) 981 9663 LittleMachineShop.com Page 93


QC Tool Posts: QCTP Sets
QC Tool Posts: QCTP Sets
2461 Quick Change Tool Post Set by A2Z CNC $99.95
Ƚ Fits 7x0, 7x2 and 7x4 mini lathes
Ƚ Made from 606 T6 Aluminum
Ƚ Hard Anodized for durability and appearance
Ƚ No tools required to change tools
Ƚ Additional tool holders available
This quick change tool post set (QCTP) includes the tool post, mounting hardware, two turning tool
holders, a boring tool holder and a cut-off blade holder.
Made by A2Z CNC.
The turning tool holders accept tools with /4" to 3/8" shank. The boring tool holder accepts
boring bars with 3/8" shanks. The cut-off tool holder holds /2" tall parting blades.
This tool post mounts with an M0 bolt.
2587 QC 1/2" Boring Tool holder, A2Z CNC $20.50
2484 QC 3/8" Boring Tool holder, A2Z CNC $18.75
3445 QC Blank Tool holder, A2Z CNC $12.75
2485 QC Cut-Off Tool holder, A2Z CNC $20.50
2483 QC Turning Tool holder, A2Z CNC $16.25
3825 QC Turning Tool holder, A2Z CNC, Pack of 4 $65.00
3691 Quick Change Tool Post Set by A2Z CNC Plus 2 Extra Turning Tool Ho $131.45
2713 Quick Change Tool Post Set for 8x12 and 8x14 Lathe $99.95
2271 Quick Change Tool Post Set for 9x20 Lathe $99.95
2486 Quick Change Tool Post Set for Atlas/Craftsman 6" $99.95
3474 Quick Change Tool Post Set for C4 Lathe $99.95
2488 Quick Change Tool Post Set for Prazi & Emco $99.95
2477 Quick Change Tool Post Set for Sherline $99.95
2478 Quick Change Tool Post Set for Taig $99.95
2487 Quick Change Tool Post Set for Unimat 3 & 4, SIEG C0 Lathes $99.95

3048 Quick Change Tool Post Set, 0XA $149.95


Ƚ Quick change tool post set for lathes with up to 9" swing
Ƚ 60% of AXA, or series 00 size wedge tyoe QCTP
Ƚ All steel construction
Ƚ Includes five tool holders
This is a true wedge type quick change tool post set that is an exact 6/0 scale copy of the AXA, or
series 00 wedge type quick change tool post.
This quick change tool post set is designed for lathes with up to 9" swing. It requires 3/4" from the
top of the compound rest to the center of the lathe.
It will hold turning tools with shanks from /4" to /2". It will hold 3/8" and /2" boring bars. It will
hold /2" tall cut-off blades.
All working parts are hardened and ground. It is completely sealed for maintenance-free operation.
This set includes the tool post and the following tool holders:
No.  - Turning & Facing,
No. 2 - Boring, Turning & Facing,
No. 4 - Heavy Duty Boring,
No. 7 - Universal Parting Blade,
No.0 - Knurling, Facing & Turning.
This tool post mounts with an M0 stud that is included. It also includes a piece of steel from which
you can make a T-slot nut to fit your lathe.

(800) 981 9663 LittleMachineShop.com Page 94


QC Tool Posts: QCTP Sets
2280 Quick Change Tool Post Set, AXA $155.00
Ƚ Quick change tool post set for lathes with up to 2" swing
Ƚ AXA, or series 00 size
Ƚ Tool holders interchange with Aloris, Dorian, and Phase II
Ƚ All steel construction
Ƚ Includes five tool holders
AXA, or series 00, wedge type quick change tool post set.
This quick change tool post set is designed for lathes with up to 2" swing.
It is a good fit on 9x20 lathes.
Many people feel that these tool posts are too large for mini lathes, but others like the mass and
rigidity they provide.
All working parts are hardened and ground. It is completely sealed for maintenance-free operation.
The tool holders interchange with Aloris, Dorian, and Phase II.
This set includes the tool post and the following tool holders:
No.  - Turning & Facing,
No. 2 - Boring, Turning & Facing,
No. 4 - Heavy Duty Boring,
No. 7 - Universal Parting Blade,
No.0 - Knurling, Facing & Turning.
This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.
3712 AXA QC Tool Post Mount for 9x20 $9.95
3787 Compound Rest Top, for AXA QCTP on C6 Lathe $35.95
2283 QC Boring Tool holder, AXA $19.95
2284 QC Cut-Off Tool holder, AXA $21.95
2285 QC Knurling & Turning Tool holder, AXA $24.95
2282 QC Turning & Boring Tool holder, AXA $15.95
2281 QC Turning & Facing Tool holder, AXA $13.95
3674 Tap & Tap Drill Bit, 9/16"-18 Thread $13.95

3876 Quick Change Tool Post Set, AXA Aloris $415.00


Ƚ AXA, or series 00 quick change tool post set for lathes with up to 2" swing
Ƚ Made by Aloris, the originator of the super precision quick change tool post
Ƚ Tool holders interchange with Aloris, Dorian, and Phase II
Ƚ All steel construction
Ƚ Starter set Includes two tool holders
Aloris Tool Technology Company is the originator of super precision Quick Change Tool Posts and
tool holders for over 60 years.
Since 946, Aloris has revolutionized the metal working industry with the introduction of the first
quick change tool post and has since been the standard of the industry, known worldwide for our
integrity and lasting quality.
AXA, or series 00, wedge type quick change tool post set. This quick change tool post set is
designed for lathes with up to 2" swing.
It is a good fit on 9x20 lathes.
Many people feel that these tool posts are too large for mini lathes, but others like the mass and
rigidity they provide.
All working parts are hardened and ground. It is completely sealed for maintenance-free operation.
The tool holders interchange with Aloris, Dorian, and Phase II.
This set includes the tool post and the following tool holders:
No.  - Turning & Facing,
No. 2 - Boring, Turning & Facing.
This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

(800) 981 9663 LittleMachineShop.com Page 95


QC Tool Posts: QCTP Sets
3658 Quick Change Tool Post Set, BXA $239.95
Ƚ Quick change tool post set for lathes with 0-5" swing
Ƚ BXA, or series 200 size
Ƚ Tool holders interchange with Aloris, Dorian, and Phase II
Ƚ All steel construction
Ƚ Includes five tool holders
BXA, or series 200, wedge type quick change tool post set.
This quick change tool post set is designed for lathes with up to 0-5" swing.
All working parts are hardened and ground. It is completely sealed for maintenance-free operation.
The tool holders interchange with Aloris, Dorian, and Phase II.
This set includes the tool post and the following tool holders:
No.  - Turning & Facing,
No. 2 - Boring, Turning & Facing,
No. 4 - Heavy Duty Boring,
No. 7 - Universal Parting Blade,
No.0 - Knurling, Facing & Turning.
This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

3444 Quick Change Tool Post Set, Hobby $109.95


Ƚ Quick change tool post (QCTP) set for small lathes
Ƚ Scaled-down version of the Phase II piston tool post
Ƚ Made from heat treated steel
Ƚ Includes two turning holders, a boring bar holder, and a cut-off tool holder
Ƚ For 7x0, 7x2, and 7x4 mini lathes and many other small lathes
The turning tool holders accept tools up to 3/8" square. The boring bar holder takes boring bars
with a 3/8" round shank. The cut-off tool holder uses /2" tall cut-off blades.
This tool post comes with an M0 bolt. It is a bolt-on accessory for 7x0, 7x2, and 7x4 mini
lathes.
With modifications, this tool post will fit Atlas 6", Craftsman 6", Emco, Prazi, and other small
lathes.

1672 Quick Change Tool Post Set, Micro $224.95


This is a high quality quick change tool post for the mini lathe.
It holds tools up to 3/8" shank.
The set includes:
Tool post
Turning tool holder
Turning and boring tool holder
Boring bar holder
Multi tool holder
Cut-off tool holder
This is similar to the Phase II Micro Quick-Change Tool System, Phase II part number 25-075.
1864 QC Boring Tool holder, Phase II Micro $35.00
1866 QC Cut-Off Tool holder, Phase II Micro $38.00
1865 QC Multi Tool holder, Phase II Micro $36.00
1863 QC Turning & Boring Tool holder, Phase II Micro $31.00
1862 QC Turning Tool holder, Phase II Micro $28.00
1867 Quick Change Tool Post, Phase II Micro $75.00

(800) 981 9663 LittleMachineShop.com Page 96


QC Tool Posts: QCTP Sets
3112 Quick Change Tool Post Set, Tormach 0XA $129.95
Ƚ Quick change tool post set for lathes with up to 8" swing
Ƚ 0XA, or series 000 size (60% of AXA size)
Ƚ Includes five tool holders
Ƚ All steel construction
Wedge type quick change tool post set.
This quick change tool post set is designed for lathes with up to 8" swing.
It is the perfect size for mini lathes. The tool holders have been designed specifically to work on
the mini lathes and other lathes that have limited distance from the top of the compound to the
center of the lathe. This tool post mounts with an M0 stud, which is included.
This quick change tool post requires 5/8" from the top of the compound rest to the center of the
lathe.
All working parts are hardened and ground. It is completely sealed for maintenance-free operation.
This tool post mounts with an M0 stud.
This set includes the tool post and the following tool holders:
No.  - Turning & Facing,
No. 2 - Boring, Turning & Facing,
No. 4 - Heavy Duty Boring,
No. 7 - Universal Parting Blade,
No.0 - Knurling, Facing & Turning.
Note: The photo is an AXA QCTP. The tool holders on the 0XA vary slightly from the photo because
they are optimized for small lathes.
3119 QC 2MT Tool Holder, Tormach 0XA $19.95
3116 QC Boring Tool Holder, Tormach 0XA $19.95
3774 QC Cut-Off Tool Holder, Tormach 0XA $21.95
3117 QC Cut-Off Tool Holder, Tormach 0XA $21.95
3118 QC Knurling & Turning Tool Holder, Tormach 0XA $26.95
3115 QC Turning & Boring Tool Holder, Tormach 0XA $14.95
3114 QC Turning & Facing Tool Holder, Tormach 0XA $13.95
3113 Quick Change Tool Post, Tormach 0XA $89.95

Rotary Tables: Rotary Tables


Rotary Table Comparison
See the rotary table comparison chart at the back of this catalog.

1927 Rotary Table, 4" H/V $249.95


This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and
spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse
taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one
minute with a ten second accuracy vernier scale is provided. The rotary table has lock down
clamps and the crank can be disengaged.
The worm gear and center hole are hardened and ground.
The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the
vertical position.
The worm ratio is 72 to .
Flatness of clamping surface: 0.0006" TIR
Parallelism of clamping surface to base: 0.0008" TIR
Squareness of clamping surface to angle face: 0.0004" TIR
Squareness of clamping surface to center slot: 0.0008" TIR
Concentricity of center bore: 0.0008" TIR
Maximum spacing error:  minute, 20 seconds.
Dividing plates and a tailstock are available for this rotary table. You can get all three items for a
significant savings as our part number 93.
1799 Dividing Plate Set for 4" Rotary Table $74.95
1931 Rotary Table, 4" with Tailstock & Dividing Plate $349.95
3791 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck $429.95
3792 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck $414.95
1800 Tailstock for 4" Rotary Table $74.95
1943 T-Slot Nuts (6 mm) and Clamping Bars $17.95

(800) 981 9663 LittleMachineShop.com Page 97


Rotary Tables: Rotary Tables
1727 Rotary Table, 4" Phase II $279.95
This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and
spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse
taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one
minute with a ten second accuracy vernier scale is provided. The rotary table has lock down
clamps and the crank can be disengaged.
The worm gear and center hole are hardened and ground.
The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the
vertical position.
The worm ratio is 72 to .
Flatness of clamping surface: 0.0006" TIR
Parallelism of clamping surface to base: 0.0008" TIR
Squareness of clamping surface to angle face: 0.0004" TIR
Squareness of clamping surface to center slot: 0.0008" TIR
Concentricity of center bore: 0.0008" TIR
Maximum spacing error:  minute, 20 seconds.
Dividing plates and a tailstock are available for this rotary table. They are the same ones that work
with our H/V rotary table (PN 927).

1810 Rotary Table, 4" Precision $169.95


Ƚ 4" (00 mm) diameter
Ƚ Use in horizontal or vertical position
Ƚ Worm ratio is 72 to 
Ƚ 0 second rotational accuracy
Ƚ 2 Morse taper center hole
This horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse
taper center hole. The table is graduated with a 360 degree scale. The rotary table is furnished
with lock down clamps.
This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw
chucks.
The table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the
vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to
mounting slot).
The worm ratio is 72 to .
Flatness of clamping surface: 0.0008".
Parallelism of clamping surface to base: 0.0008".
Squareness of clamping surface to angle face: 0.002".
Squareness of clamping surface to center slot: 0.002".
Concentricity of center bore: 0.0008" TIP.
A dividing plate and a tailstock are available for this rotary table. You can get all three items for a
significant savings as our part number 283.
3146 Adapter, 3" Lathe Chuck $28.95
1888 Adapter, 3" Lathe Chuck $28.95
1811 Dividing Plate Set for 4" Rotary Table $59.95
2183 Rotary Table, 4" with Tailstock & Dividing Plate $239.95
3131 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck $299.95
3132 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck $289.95
1812 Tailstock for 4" Rotary Table $59.95
3442 T-Slot Nuts (8 mm) and Clamping Bars $24.95
1813 T-Slot Nuts (8 mm) and Clamping Bars $14.95

(800) 981 9663 LittleMachineShop.com Page 98


Rotary Tables: Rotary Tables
1787 Rotary Table, 6" Phase II $295.95
This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and
spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse
taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one
minute with a ten second accuracy vernier scale is provided. The rotary table has lock down
clamps and the crank can be disengaged.
The worm gear and center hole are hardened and ground.
The table is 3.35" high when horizontal, and the centerline is 4.92" above the table when in the
vertical position.
The worm ratio is 90 to .
Flatness of clamping surface: 0.0006"
Parallelism of clamping surface to base: 0.0008"
Squareness of clamping surface to angle face: 0.0004"
Squareness of clamping surface to center slot: 0.0008"
Concentricity of center bore: 0.0008"
Dividing plates and a tailstock are available for this rotary table.
1801 Dividing Plate Set for 6" Rotary Table $125.00
3566 Rotary Table, 6" with Tailstock & Dividing Plate, Phase II $495.95
1802 Tail Stock for 6" Rotary Table, Phase II $125.00

2326 Rotary Table, 6" Precision $249.95


This horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse
taper center hole. The table is graduated with a 360° scale. The rotary table is furnished with lock
down clamps.
The table is 3.70" high when horizontal, and the centerline is 3.86" above the table when in the
vertical position.
The worm ratio is 72 to .
Flatness of clamping surface: 0.0008"
Parallelism of clamping surface to base: 0.0008"
Squareness of clamping surface to angle face: 0.002"
Squareness of clamping surface to center slot: 0.002"
Concentricity of center bore: 0.0008" TIP
A dividing plate, tailstock and chuck adapter are available for this rotary table. You can get all
four items for a significant savings as our part number 2329.
2330 Adapter, 5" Lathe Chuck $29.95
2328 Dividing Plate Set for 6" Rotary Table $109.95
2329 Rotary Table, 6" with Tailstock & Dividing Plate $399.95
2327 Tailstock for 6" Rotary Table $109.95

Tooling: Arbors and Sleeves


2393 Arbor, Blank 3MT Drawbar $12.95
This arbor has a soft end which can be machined to suit your purpose.
The arbor has a 3 Morse taper shank and is threaded for a 3/8-6 NC drawbar.
The machinable end is .5" long and .5" in diameter.

2394 Arbor, Blank 2MT Drawbar $12.95

(800) 981 9663 LittleMachineShop.com Page 99


Tooling: Arbors and Sleeves
Arbors, Drill Chuck
The long taper goes in the lathe tailstock or mill spindle.
The short taper goes in the drill chuck.
The 2MT Stub arbors fit the mini lathe tailstock without cutting.

3544 Arbor, Drill Chuck 0MT Standard to 2JT $8.95


3543 Arbor, Drill Chuck 0MT Standard to 33JT $8.95
1778 Arbor, Drill Chuck 1MT Tang to 2JT $6.95
1894 Arbor, Drill Chuck 1MT Tang to 33JT $6.95
1882 Arbor, Drill Chuck 2MT Drawbar to 2JT $8.95
1883 Arbor, Drill Chuck 2MT Drawbar to 33JT $8.95
3144 Arbor, Drill Chuck 2MT Drawbar to 3JT SALE $3.95
3143 Arbor, Drill Chuck 2MT Drawbar to 6JT SALE $3.95
1803 Arbor, Drill Chuck 2MT Short to 2JT $8.95
1807 Arbor, Drill Chuck 2MT Short to 3/8-24 Thread $8.95
1804 Arbor, Drill Chuck 2MT Short to 33JT $8.95
2955 Arbor, Drill Chuck 2MT Standard to 33JT $8.95
1167 Arbor, Drill Chuck 2MT Tang to 2JT $8.95
1613 Arbor, Drill Chuck 2MT Tang to 3/8-24 Thread $8.95
1190 Arbor, Drill Chuck 2MT Tang to 33JT $8.95
2298 Arbor, Drill Chuck 3/8" Straight to 2JT $11.95
1805 Arbor, Drill Chuck 3MT Drawbar to 2JT $10.95
1808 Arbor, Drill Chuck 3MT Drawbar to 3/8-24 Thread $11.95
1806 Arbor, Drill Chuck 3MT Drawbar to 33JT $10.95
1191 Arbor, Drill Chuck 3MT Tang to 2JT $10.95
1614 Arbor, Drill Chuck 3MT Tang to 3/8-24 Thread $10.95
1192 Arbor, Drill Chuck 3MT Tang to 33JT $10.95
1676 Arbor, Drill Chuck R8 to 33JT $11.95

1195 Morse Taper Sleeve 3MT - 2MT $5.95


Morse taper sleeve adapts 2 Morse taper tools to 3 Morse taper machines.
Hardened and precision ground.

1193 Morse Taper Sleeve 2MT - 1MT $5.95


1194 Morse Taper Sleeve 3MT - 1MT $5.95

2190 R8 to 2MT Sleeve $9.95


This sleeve adapts 2 Morse taper tools to R8 spindles.
It is hardened and precision ground.

3671 R8 to 3MT Sleeve $11.95


This sleeve adapts 3 Morse taper tools to R8 spindles.
It is hardened and precision ground.

Tooling: Clamping Kits


2551 Clamp, Adjustable $6.95
Ƚ One piece assembly allows quick set-up
Ƚ Instant height adjustment
Ƚ Attached brass covers protect machine table and workpiece
Ƚ Fits 7/6 and 2 mm T-slots
Ƚ Clamps work up to .75" thick, clamp is .25" wide

(800) 981 9663 LittleMachineShop.com Page 100


Tooling: Clamping Kits
2718 Clamping kit, 6 mm T-Slot, 36-Piece $49.95
36-piece clamping kit
This clamping kit fits the 6 mm T-slots on the Taig mill, and the /4" T-slots on the Sherline mill.
The clamping kit includes 0 M5 studs, 4 step block pairs, 6 T-slot nuts (in each of two sizes), 6
flange nuts, and 6 step clamps.
There are more parts included than shown in the photo.

1144 Clamping Kit, 7/16" T-Slot $39.95


52-piece clamping kit
This clamping kit fits the 2 mm T-slots on the mini mill.
The clamping kit includes 24 3/8-6 studs, 6 step block pairs, 6 T-slot nuts, 6 flange nuts, 4
coupling nuts, and 6 end hold downs.
1268 Clamping Kit, 1/2" T-Slot $39.95
3667 Clamping Kit, 5/8" T-Slot $41.95

2039 Clamping kit, 8 mm T-Slot, 36-Piece $39.95


36-piece clamping kit
This clamping kit fits the 8 mm T-slots on the micro mill.
The clamping kit includes 0 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step
clamps.
There are more parts included than shown in the photo.
1972 Clamping Kit, 8 mm T-slot, 20-Piece $29.95

3642 Clamps, Adjustable 2.7" x 0.8" $29.95


Ƚ Two self-adjusting milling clamps 2.7" long and 0.8" wide
Ƚ Clamp material up to .5" thick
Ƚ Use with 0-32, /4-20, M5, or M6 studs
Ƚ 606 billet aluminum, hard anodized, laser engraved
Ƚ Studs and nuts are not included
3808 Clamps, Adjustable 1.7" x 0.65" $27.95
3809 Clamps, Adjustable 2.3" x 0.65" $28.95
3802 Clamps, Adjustable 3.7" x 0.8" $31.95
3805 Clamps, Adjustable 4.1" x 1.2" $19.95
3806 Clamps, Adjustable 5.5" x 1.2" $21.95
3803 Studs, 10-32 with Spherical Nuts & Washers $9.95

3756 Clamps, Low Profile Cam Action 7/16" $59.95


Ƚ Cam action clamps have large holding force
Ƚ Fits 7/6" wide T-slot
Ƚ Six clamp assemblies including clamps, bolts, and T-slot nuts
Ƚ Similar to the Mitee Bite system
Ƚ Includes metal container for storage
3757 Clamps, Low Profile Cam Action 1/2" $59.95
3758 Clamps, Low Profile Cam Action 8 mm $59.95

T-Slot and Flange Nuts


T-slot nuts are used on mill tables and rotary tables.
They are heat treated and have a black oxide finish.
The size of a T-slot nut is the width of the top of the T-slot.

2253 Flange Nut, 3/8"-16 $1.29


2021 T-Slot Nut (1/2") $1.49
3097 T-Slot Nut (1/4") $1.95
2991 T-Slot Nut (10 mm) $3.55
1418 T-Slot Nut (12 mm) $3.55
2059 T-Slot Nut (6 mm) $1.49
1269 T-Slot Nut (7/16") $1.49
2058 T-Slot Nut (8 mm) $1.95

(800) 981 9663 LittleMachineShop.com Page 101


Tooling: Clamping Kits
1943 T-Slot Nuts (6 mm) and Clamping Bars $17.95
Ƚ Four T-slot nuts for 6 mm T-slots
Ƚ Four studs of two different lengths
Ƚ Two flange nuts
Ƚ Two step clamps
Ƚ Two step blocks
This set of T-slot nuts and clamping bars fits our 4" H/V rotary table (PN 927) and the Phase II 4"
rotary table (PN 727). This kit also fits Taig mills.

1813 T-Slot Nuts (8 mm) and Clamping Bars $14.95


Ƚ Two T-slot nuts for 8 mm T-slots
Ƚ Two studs
Ƚ Two flange nuts
Ƚ Two step clamps
Ƚ Two step blocks
This set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 80). It also fits the
Harbor Freight micro mill.

3442 T-Slot Nuts (8 mm) and Clamping Bars $24.95


Ƚ Two T-slot nuts for 8 mm T-slots
Ƚ Two studs
Ƚ Two flange nuts
Ƚ Two step clamps
Ƚ Two step blocks
This set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 80). It also fits the
Harbor Freight micro mill.

Tooling: Drill Chucks


2951 Drill Chuck 6 mm for Unimat 3 & 4, SIEG C0 Lathes $24.95
Ƚ 0.6 to 6 mm (0.024" to 0.24") capacity
Ƚ M4x.0 mounting thread
Ƚ Fits Unimat 3 & 4 lathes
Ƚ Fits SIEG C0 lathes
Ƚ Includes chuck key

1212 Drill Chuck, 1/2" $9.95


0-/2" Capacity drill chuck.
All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount.
Runout of this chuck is 0.008" (0.20 mm) or less.

1660 Drill Chuck, 1/2" Keyless $32.95


/2" capacity keyless drill chuck.
No chuck key is required with this self-tightening design. The chuck is made from hardened tool
steel to ensure accuracy and extended life.
The rated capacity is /32" to /2". Number 33 Jacobs taper mount.
1659 Drill Chuck, 3/8" Keyless $26.95

3153 Drill Chuck, 1/2" Professional Grade $29.95


Ƚ /32-/2" Capacity professional quality drill chuck.
Ƚ Runout 0.004" (0.0 mm) or less.
All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount.
This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout
specification of 0.004" (0.0 mm) or less.

(800) 981 9663 LittleMachineShop.com Page 102


Tooling: Drill Chucks
1148 Drill Chuck, 1/2" with 2MT Short Arbor $29.95
Ƚ /2" capacity drill chuck
Ƚ Mounted on a short 2 Morse taper shank for the mini lathe
Ƚ Fits Jet 04 mini wood lathe
This chuck is specifically designed for the mini lathe tailstock.
The rated capacity of this chuck is  mm (0.039") to 3 mm (0.52").

2870 Drill Chuck, 1/2" with 2MT Standard Arbor $30.95


Ƚ /2" capacity drill chuck
Ƚ Mounted on a 2 Morse taper shank
Ƚ For small lathe tailstock
This chuck has a standard length 2 Morse taper arbor and will eject from most lathes with a 2MT
tailstock taper.
The rated capacity of this chuck is  mm (0.039") to 3 mm (0.52").

1396 Drill Chuck, 1/2" with R8 Shank $32.95


/2" JT33 Chuck and R8 Shank.
Fits mini mills with the R8 spindle.

1213 Drill Chuck, 3/8" $8.50


0-3/8" Capacity drill chuck.
All working parts are hardened. Chuck key is included. Number 2 Jacobs taper mount.

3790 Sensitive Drill Feed and 1/8" (3 mm) Keyless Drill Chuck $99.95
Ƚ Fingertip control for drilling small holes
Ƚ Helps prevent drill breakage
Ƚ 0JT taper, /2" straight shank, 3/4" travel
Ƚ /8" ( 3 mm) capacity keyless drill chuck
To use the sensitive drill feed, grasp the knurled ring and pull it down to feed the drill into the
workpiece. The internal spring retracts the drill when the ring is released.
No chuck key is required with this self-tightening design. The chuck is made from hardened tool
steel to ensure accuracy and extended life.
The rated capacity is of the drill chuck is 0 to 3 mm. It has a number 0 Jacobs taper mount and
0.002" (0.05 mm) maximum runout.
3665 Sensitive Drill Feed $49.95

Tools & Things: Abrasives


3890 Abrasive Cloth, 1" Wide 240 Grit $0.50
Ƚ Aluminum oxide abrasive
Ƚ High grade resin-boinded on J-weight cotton cloth backing
Ƚ Flexible for contour work
The price is for one yard (3 feet or one meter). Order as many yards as you want and we will cut it
to that length. Maximum length is 50'.
Use for cleaning and deburring metal surfaces. Can be used with water or oil.
3891 Abrasive Cloth, 1" Wide 320 Grit $0.50
3892 Abrasive Cloth, 1" Wide 400 Grit $0.50
3893 Abrasive Cloth, 1" Wide 600 Grit $0.50

3886 Abrasive Sheet, Wet or Dry 240 Grit $0.49


Ƚ 9" x 2" Sheet
Ƚ Silicon carbide abrasive for efficient cutting
Ƚ Resistant to oil and water
Use this sandpaper with a lubricant (water or very light oil) to reduce clogging, extend the life,
and improve the finish.
3887 Abrasive Sheet, Wet or Dry 320 Grit $0.49
3888 Abrasive Sheet, Wet or Dry 400 Grit $0.49
3889 Abrasive Sheet, Wet or Dry 600 Grit $0.49

(800) 981 9663 LittleMachineShop.com Page 103


Tools & Things: Apparel
Tools & Things: Apparel
2185 Shop Apron $15.95
We had these aprons custom-made to our design out of heavy-duty denim.
The swinging top pocket ensures that valuable items such as a micrometer or your glasses do not
fall out when you bend over.
The large left pocket is just the right size for a 6" dial or digital caliper. The Velcro on the flap
ensures that it is protected.

Tools & Things: Coolants & Lubricants


2236 Coolant, Kool Mist 77 Pint $6.95
Ƚ Safe for people
Ƚ Safe for materials
Ƚ Safe for the environment
Ƚ Safe for machines
Kool Mist 77 coolant is highly recommended for mist cooling any metal or alloy where tougher
machine conditions require greater lubricity. It is particularly useful where the material is very
abrasive.
Improves metal cutting, milling, turning, drilling, grinding, and sawing.
You can also use Kool Mist 77 as a flood coolant.
Kool Mist 77 is 00% synthetic and biodegradable, and meets the requirements of OSHA & EPA. This
coolant will not cause rancidity or buildup and creates no rust or corrosion when diluted with
clean water. Workpieces and machine parts remain clean and unstained.
Mix this concentrate with 32 parts water before use. Makes over 4 gallons of coolant.
2235 Coolant, Kool Mist 77 Gallon $36.00

3089 Cutting Compound, Nikx Stikx $4.95


Ƚ Wax-based metal-cutting compound in 6" tube
Ƚ Extends tool life
Ƚ Lubricate saw blades, taps, drills, and hole saws
Nikx Stikx is a non-hazardous solid metal-cutting compound that eases your task ane extends the
life of all metal cutting and threading tools. Cutting oils are combined with wax in a tube
approximately " in diameter and 6" long.
Rub a little compound on the tool cutting edges. The compound heats up when cutting starts. The
heated compound migrates to the tool cutting edge. The cutting compound helps prevent steel
and aluminum from galling on the tool cutting edges.
The compound works equally well on wood working tools by preventing wood pitch build-up and is
a great lubricant for driving screws and lag-bolts.
Craftsmen, electricians, plumbers, maintenance engineers and machinists welcome the product
because it’s convenient to use without fear of spillage.

3088 Cutting Fluid, Re-Li-On 4oz $3.95


Ƚ Engineered formula for cutting and tapping
Ƚ Extends tool life and controls chip welding
Ƚ Improves finishes and tolerances
Ƚ Safe and odorless
Ƚ Spray top for easy application
Re-Li-On Cutting and Tapping Fluid is a non-ozone depleting product that is safe on aluminum and
exotic alloys such as stainless steel, hastelloy, inconel and titanium. The engineered formula clings
to the cutting tool and provides strong lubrication.
3120 Cutting Fluid, Re-Li-On 16oz $9.95

(800) 981 9663 LittleMachineShop.com Page 104


Tools & Things: Coolants & Lubricants
3195 M1 Lubricant, 12 oz Aerosol Can, Starrett SALE! $6.95
Ƚ Starrett M all-purpose lubricant in 2 oz. Aerosol can
Ƚ Must be shipped by ground; not available outside the continental US
M® is the "modern one" - the superior alternative. It dries and will not attract dirt or other
contaminants as other leading lubricants do.
Simultaneously dries as it protects, avoiding dirt and grime. Dries to leave a film that protects and
lubricates. Lubricates without silicone. Penetrates to quickly to free frozen nuts, bolts and metal
parts. Prevents rust and corrosion damage by providing a molecular shield that locks to the metal.
Non-soluble in water so it displaces moisture to lift it away from the surface to be protected.
Nonconductive, preventing short circuits.
Applications for industry are nearly endless. Protect working surfaces of machinery; use in dip
tanks to protect production parts in process, or apply on tools when stored. M is also ideal in
highly corrosive situations that destroy metal equipment used in marine environments.
3179 M1 Lubricant, Case of 12 Aerosol Cans, Starrett SALE $69.95

1825 Tool and Instrument Oil, Starrett $6.20


Ƚ Starrett catalog number 620
This oil is the same extra-fine lubricant made to Starrett specifications and used in the Starrett
factory to lubricate and protect their precision measuring tools and instruments. It is also perfect
for all mechanics, homeowners, hobbyists, and sportsmen who require the finest all-purpose oil.
Special high-refining makes Starrett Tool and Instrument Oil colorless, ensures thorough
lubrication of close-fitting parts at high temperatures and below zero, and provides a strong
lasting film over all areas requiring protection against rust. This oil has not been adulterated by
additives for color and odor.

Tools & Things: Gift Certificates


1675 Gift Certificate, $100 $100.00
LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and
you don't need to worry about whether or not it fits.

1673 Gift Certificate, $25 $25.00


1674 Gift Certificate, $50 $50.00

Tools & Things: Lights


3682 Machine Light With Magnetic Base $19.95
Ƚ Powerful magnetic base with On/Off switch
Ƚ Flexible arm for easy positioning
Ƚ 20 VAC power
Ƚ Use standard 60 W incandescent medium base bulb (not included)

2618 Machine Light, Gooseneck $39.95


Ƚ Flexible gooseneck allows easy positioning
Ƚ Magnet and screw mount provided
Ƚ Six foot 3-prong power cord for 20VAC operation
Ƚ Small 3" diameter head won't get in the way
Ƚ 35 watt halogen bulb produces intense light
This lamp has a flexible gooseneck so you can mount it behind your machine and bend the light to
where you need it. The lamp is 24" overall.
You can simply set it on a steel surface, or you can screw it down with the tabs provided. There is
an M8 threaded hole in the bottom if you want to make your own mounting bracket instead of
using the one provided.
20V AC power.
3799 Halogen Bulb $9.95
2619 Halogen Bulb $11.95

3715 Machine Light, Halogen With Magnetic Base $39.95


Ƚ 35 watt halogen bulb produces intense light
Ƚ 20" flexible shaft
Ƚ Powerful magnetic base with ON/OFF switch
Ƚ 3-prong power cord for 20VAC operation

(800) 981 9663 LittleMachineShop.com Page 105


Tools & Things: Lights
3015 Spindle Light, Mini Mill $59.95
This circular fluorescent light, made for a microscope, fits around the spindle on a mini mill.
It provides good, even light on your work.
The hole in the light is .85" in diameter. It fits the mini mill fine, but if you have a different mill
you had better check to be sure it will fit.

Tools & Things: Things


3855 Safety Glasses $2.95
Ƚ Clear lenses
Ƚ Black frames
Always wear safety glasses when working in your shop.

3896 SpillMaster container $4.95


Ƚ Avoid workbench spills
Ƚ Holds cutting fluids and lubricants
Ƚ Won't spill, even when upside down
Ƚ Durable polyethlene for long life
Ƚ Includes applicator brush

Tools & Things: Threading Tools


2539 Hand Tapper $99.95
Ƚ Assures straight tapped holes
Ƚ Helps prevent broken taps
Ƚ 9 tap adapters included
Ƚ Spindle is balanced for sensitive feel
Ƚ Sliding vise jaws keep work from slipping
This rigid hand tapper helps prevent broken taps while tapping straight holes.
Precision ground work table and spindle ensure accuracy.
Tap adapters for #6, #8, #0, /4", 5/6", 3/8", 7/6" /2" and 5/8" taps. (Not recommended for
taps smaller than #6.)
The work area is 6.5" x 0". The clearance height is 7" and the throat depth is 7.5" The overall
height is 3".
Includes an offset handle and a rack for the tap adapters.

2898 Hand Tapper, Mini $44.95


Ƚ Assures straight tapped holes
Ƚ Helps prevent broken taps
Ƚ 7 tap adapters included
This rigid hand tapper helps prevent broken taps while tapping straight holes.
Precision ground work table and spindle ensure accuracy.
Tap adapters for #0 through 5/6" taps.
The tableis 8.5" x 6". The clearance height is 3.75" and the throat depth is 4.5" The overall height
is 9".
2900 Tap Adapters, Set of 7 $9.95

3602 Tap Adapters, 3/8" Socket Drive $22.95


Ƚ Jaws adjust to tightly secure taps
Ƚ Fits all 3/8" square drive wrenches
Ƚ Small adapter fits taps for #0 to /4" thread
Ƚ Large adapter fits taps for /4" to /2" thread
For use in tight workspaces or for putting some muscle on those hard-to-turn large taps. Designed
for use with taps, reamers, screw extractors and other tools with a square shank.
Not recommended for cutting new threads.

(800) 981 9663 LittleMachineShop.com Page 106


Tools & Things: Threading Tools
2901 Tap Guide, Machine $9.95
Ƚ Provides sensitive feel for tapping small holes on lathes
Ƚ Assures straight threads
Ƚ Helps prevent breaking taps
Ƚ 3/8" diameter shank, " diameter handle
Ƚ Holds #0 through #2 taps
This tapping guide is used to facilitate power tapping with a lathe. Put the tap in the chuck on the
tapping guide and put the extension rod into the lathe's tailstock drill chuck.
Then, as you tap the hole, the handle and chuck are free to move away from the lathe's drill
chuck. Simply release your grip when the tap reaches the correct depth.
The tap guide is 6.5" in overall length.

3603 Tap Handle, Adjustable $6.95


Ƚ Offset handle adjustable tap & reamer wrench
Ƚ Straight handle design provides greater leverage, especially when using larger diameter tapes

2621 Tap Wrench, Starrett $19.50


Ƚ Starrett catalog number 74
This is a well-designed tap wrench, ideal for holding smaller diameter taps, drills, reamers, and
other tools up to /4" (6.35 mm) in diameter. It works with 0-4 tap sizes.
It will firmly grip round or square shanks, is lightweight and well proportioned. The gripping
surface is properly heat treated to withstand any ordinary use.
3177 Tap Wrench 6" Starrett $39.00

3654 Tap Wrenches, Miniature $10.95


Ƚ For #0 to #6 taps
Ƚ For M.6 to M3.5 taps
Ƚ Fits 0.0" driving square
Ƚ Light weight tool maximizes "feel" while tapping
Ƚ Set of two tap wrenches
These miniature tap wrenches are perfect for very small taps. They let you actually feel the
threads being cut, and you can easily feel the tap tighten up when it is time to reverse and break
the chips.
The longer tap wrench is 2.5" long. The shorter one is .5" long. They are brightly anodized so you
won't lose them.

2571 Tapping Block, OMW $39.95


Ƚ Starts taps straight - reduces breakage
Ƚ Fits taps from 0-80 to 3/8-6
Ƚ Elegant design
Over 90% of broken taps are the result of the tap not starting straight in the hole, yet most people
tapping by hand simply "eyeball" their tap into a hole and then are amazed when the tap snaps in a
valuable part! The OMW Tapping Block was inspired by a block used nearly every day by a master
tool and die maker I had the pleasure of working with in my shop. He used his block whenever
tapping a hole, and I never saw him break a tap! Simply hold the tapping block flat against your
work, above the hole you've tap drilled. Place your tap through the appropriately sized guide hole
and you are assured of perfect tap alignment when starting your thread. The OMW Tapping Block is
manufactured of the highest quality 440 steel. It is beautifully designed, expertly knurled and
chamfered for easy grip, with counterbored holes to allow for material chip clearance when
tapping. Fits all common taps from 0-80 thread to 3/8-6 (the seven holes fit tap shanks of #0-#6,
#8, #0, #2, /4, 5/6, and 3/8). This Tapping Block should be in the tool chest of every
machinist, from beginner to expert.
2854 Tapping Block, OMW Metric $39.95

(800) 981 9663 LittleMachineShop.com Page 107


Tools & Things: Threading Tools
3434 T-Handle Tap Wrench for #0 to #10 Taps, Starrett $28.00
Ƚ Starrett T-handle tap wrench
Ƚ Starrett catalog number 93A
Ƚ For holding taps, drills, reamers, and other small tools to be turned by hand
Ƚ Fits machine screw taps from #0 to #0
Ƚ Fits fractional thread taps from /6" to 3/6"
The body of this T-hadle tap wrench is centered, enabling the worker to use it on lathe centers or
on an upright drilling machine to start the tap straight. The jaws conform to the tool being held,
making it rigid and less apt to loosen. They are properly heat treated to withstand ordinary shop
use.
The wrenche has a sliding handle that is frictionally held. This feature permits the handle to be
removed entirely or positioned so that leverage can be applied when working in close quarters.
These tools are designed to hold square shanks. Round shanks can be gripped, but care must be
used. Excessive tightening may break the binding nut.
3555 T-Handle Tap Wrench for 1/4-1/2" Taps, Starrett $38.50
3554 T-Handle Tap Wrench for 7/32-7/16" Taps, Starrett $30.00

2852 T-Handle Tap Wrench for #0 to #8 taps $7.00


Ƚ For hand tapping and driving screw extractors
Ƚ Fits machine screw taps from #0 to #8
Ƚ Fits fractional thread taps from /6" to 5/53"
For holding taps, reamers, and other small tools to be turned by hand.
2853 T-Handle Tap Wrench for #8 to 1/4" taps $7.50

3866 V-TapGuide Hand Tap Guide Set, Inch, Metric & Free Hat $39.90
Ƚ Both inch and metric threads, plus a free hat
Ƚ Eliminate tap breakage due to improper alignment
Ƚ Automatically squares up the tap with the surface
Ƚ 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners
Ƚ Portable, pocket size. Protective plastic storage tube is included
V-TapGuide™ by Big Gator Tools™ is made of a special alloyed steel that is ground and heat treated
for durability. The guide holes are smooth, unlike drilled or reamed holes. Guide holes are sized
for ANSI standard ground taps.
The standard inch V-TapGuide can handle tap sizes of 0-80, -64, -72, 2-56, 2-64, 3-48, 3-56, 4-36,
4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 0-24, 0-32, ¼-20, ¼-28, 5/6-8, 5/6-
24, 3/8-6, 3/8-24, 7/6-4, 7/6-20, ½-3, ½-20, 5/8-, and 5/8-8.
The metric V-TapGuide can handle tap sizes of .6mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm,
6mm, 8mm, 0mm, 2mm, 4mm, and 6mm.
3865 Hat, Big Gator Tools $9.95
3427 V-TapGuide Hand Tap Guide for Inch Threads $19.95
3428 V-TapGuide Hand Tap Guide for Metric Threads $19.95

Tools & Things: Tools


3681 Arbor Press, 1/2-Ton $37.95
Ƚ Heavy duty frame
Ƚ Four position anvil
Ƚ Steel pinion
Ƚ Maximum work height 4.25"
Ƚ Maximum work diameter 6.5"

2620 Automatic Center Punch, Starrett $29.00


Starrett Automatic Center Punch with adjustable stroke.
Starrett catalog number 88.
This punch has a lightweight, knurled aluminum handle for a positive grip and easy handling. No
hammer is required! Just hold the punch in an upright position, press the handle down, and a built-
in mechanism strikes a perfect center mark every time. The force of the blow can be adjusted by
turning the knurled cap.
All working parts are made of tool steel, properly hardened. The hardened tool steel point can
easily be removed for resharpening or replacement. Works on metal, plastics, wood and other
machinable materials.

(800) 981 9663 LittleMachineShop.com Page 108


Tools & Things: Tools
3553 Automatic Center Punch, Starrett $33.00
Ƚ Starrett Automatic Center Punch with adjustable stroke
Ƚ Starrett catalog number 8A
Rugged automatic punches have all-steel handles and parts. These punches have a mechanism that
automatically strikes a blow when downward pressure is applied. No hammer is required, making
one hand always free to steady the work.
The adjustable knurled cap regulates the force of the blow. Should a heavy mark be required, the
cap is screwed down. Progressively lighter marks are obtained by turning the cap upward. The
tension of the spring, which regulates the blow is constant, so marks made by the point are
uniform in depth and size for each setting. The point can be easily removed for regrinding and/or
replacement. All sizes are identical in style, differing only in the striking power.

3189 Bench Block $24.95


Ƚ Made from steel; hardened and ground
Ƚ Handy tool for holding work, driving pins, drilling and so on
Ƚ Knurled edge provides a good grip
Ƚ V-groove accomodiates round and odd-shaped objects
Ƚ Holes from /8" to 5/8" diameter
This bench block is 3" in diameter and .5" thick.

1820 Center Punches, Starrett $30.50


Starrett Center Punches with round shanks. Set of 5, Nos. 7AA, A, B, C, D in Plastic Case
Starrett catalog number S7PC.
This set includes the following sizes, measured at the top of the tapered point: /6”, 5/64”,
3/32”, /8”, and 5/32” diameter.
Starrett No. 7 Center Punches are made of specially selected steel, hardened and properly
tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points
are ground at the proper angle to give maximum service, and the tips are accurately centered.
These punches are universally used, but most often by machinists. They are well-proportioned for
ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All
of them feature nicely knurled finger grips for ease of handling. A special tempering process makes
the head less likely to fracture from a hard, off-center blow.
ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS.

3685 Combination 12" Shear, Brake, & Roll $275.95


Ƚ Work 2" wide steel up to 22 gage
Ƚ Brake has sectional fingers for forming boxes
Ƚ .5" Diameter ground slip rolls with six rod and wire forming grooves
Ƚ Back gage assists in shearing to close tolerances
This combination shear, break and slip roll provides a lot of capability in a small package.
Grooves in the slip rolls fit 3/32", /8", 5/32", 3/6", 7/32", and /4" wire and rod.

1671 Deburring tool $2.99


This deburring tool has a built-in E-00 blade.
It deburs holes with a flick of the wrist.

3884 Drive Pin Punches, Extra Long, Starrett $37.50


Ƚ Set of 5 extra long 8" pin punches
Ƚ Includes /8", 3/6", /4", 5/6", and 3/8" punches
Ƚ Well proportioned, hardened, proper tempered with a knurled grip
Ƚ Incluides vinyl case
Ƚ Starrett catalog number S248PC
Starrett No. 248 Drive Pin Punches are extra-long, measuring 8" (200mm). The bodies are 4-/2"
(5mm) and the drive pin sections are 3-/2" (90mm) long. They are well-proportioned,
hardened, properly tempered, and have a knurled grip. They are designed to withstand hard use
and provide a most satisfactory punch for machine shop and motor service work. Just the punch to
follow long cotter pins and the like into holes without hindrance. The diameters of the punches
are slightly under the sizes listed.

(800) 981 9663 LittleMachineShop.com Page 109


Tools & Things: Tools
1821 Drive Pin Punches, Starrett $46.50
Starrett 8 piece drive pin punch set. Set of 8, Nos. 565A/B/C/D/E/F/G/H in a round wood box
Starrett catalog number S565WB.
This set includes the following diameter punches: /6”, 3/32”, /8”, 5/32”, 3/6”, 7/32”, /4”,
5/6”.
Starrett No. 565 Drive Pin Punches are well proportioned, hardened, properly tempered, nicely
finished, and have a knurled finger grip. Each punch has the size stamped on the head.
These punches are universally used, but most often by machinists. They are well-proportioned for
ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All
of them feature nicely knurled finger grips for ease of handling. A special tempering process makes
the head less likely to fracture from a hard, off-center blow.
ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS

2891 Grinder, Proxxon IB/E Professional Rotary Tool $134.95


Ƚ Ball bearing spindle of ground steel, with lock button for rapid cutter changing
Ƚ Streamlined die-cast aluminum head for exact bearing seats and optimal stability
Ƚ Powerful 00 W motor with full-wave electronics for variable speeds between 5,000 and 20,000
rpm
Ƚ Complete with six triple-slit steel collets covering /32'' to /8'' (.0 - 3.2 mm)
Ƚ Two year limited warranty
Grinder with 34 industrial quality bits & cutters with shanks Ø 3/32'' (2.3 mm). High concentricity
(maximum run out .00'').
This high-revving motor is usable for extended periods at a time. 20V AC, 60 Hz
The ground steel spindle runs in a ball bearing assembly, minimizing play. Six high concentricity
collets sized /32'', /6'', 5/64'', 3/32'', 7/64'' and /8'' (.0, .5, 2.0, 2.4, 3.0 and 3.2 mm) along
with a collet nut are included.
Packed in durable plastic case, complete with the 34 bits & cutters as shown above.
2969 Cut-Off Disks (50), Aluminum Oxide for Rotary Tools $12.80
3033 Grinder, Proxxon IB/E Professional Rotary Tool 240VAC $129.95
2967 Grinding Wheels (10), Aluminum Oxide for Rotary Tools $6.75
2968 Grinding Wheels (10), Silicon Carbide for Rotary Tools $6.75

3562 Hacksaw Frame, Starrett Heavy Duty $35.00


Ƚ Starrett Closed Grip Heavy Duty High-Tension Hacksaw Frame
Ƚ Starrett catalog number K53
Ƚ 2" (300mm) frame
Ƚ 4-3/8" (0mm) throat depth
The K53 is a rugged, professional quality high-tension frame constructed of cast aluminum with
an extra-thick tubular steel bar for added strength. The steel tube also provides on-hand storage
for spare blades.
The K53 High-Tension Frame is engineered for use with Starrett bi-metal Bluestripe® and
Greenstripe® blades.

With just three 360° turns, the easy to use adjusting screw will tension the blade up to 28,000 psi
(2,000kg/cm) which prevents the blade from twisting and binding when bearing down on the cut.
Each K53 Heavy Duty High-Tension Frame is shipped with a Starrett Bluestripe bi-metal unique
ground tooth hacksaw blade.

3881 Pin Vise, 0.010" - 0.055" (0.25 - 1.4mm) Starrett $18.00


Ƚ Special tapered collet, provides maximum clamping surface
Ƚ Smaller body diameter than the chuck to allow fast opening and closing and rapid rotation
Ƚ Provides rapid rotation between the thumb and finger when used on small work
Ƚ Starrett Catalog Number 240A
Starrett pin vises are useful for securely holding small stock, taps, drills, reamers, scribers, wire,
small files, and other tools. The jaws on all are hardened and with a few turns of the binding nut,
a firm grip may be obtained. Handles and binding nuts are nickel-plated except for the No. 66
Series.
A hole extends through the full length of the handles so that wires of any length and any diameter
up to the full size of the tool can be held.
3882 Pin Vise, 0.025 - 0.075” (0.64 - 1.9mm) Starrett $21.50
3883 Pin Vise, 0.045 - 0.135” (1.2 - 3.4mm) Starrett $23.50

(800) 981 9663 LittleMachineShop.com Page 110


Tools & Things: Tools
3560 Pocket Level, Starrett $24.00
Ƚ Starrett 3.5" pocket level
Ƚ Starrett catalog number 35B
Ƚ 3.5" (88 mm) long
Ƚ Satin nickel plated finish
This is an extremely useful Starrett level that fits handily in the pocket with no sharp edges. Made
from hexagonal stock with convex ends and satin nickel-plated finish.

3178 Precision Screwdriver Set, Starrett $47.50


Ƚ Set of 7 Starrett precision jewlers' screwdrivers in a case
Ƚ Starret catalog number S55Z-7
Ƚ Set of 7 screwdrivers in a case
Ƚ Durable hardened chrome-vanadium blade/contacts
The Starrett No. 55 Screwdrivers with soft-touch handle are lightweight and have a very
ergonomic design, making them easy to work with.
Yet the No. 55 is a rugged product. The blade/contacts are made of chrome-vanadium,
molybdenum steel, hardened and chrome-plated, allowing them to hold up well in the toughest
applications.
Soft-touch handles are tapered and proportioned to blade for rapid rotation and spin-free finger
control cap provides precise turning and control
Flat Blade widths are: .060"/.5mm, .080"/2.0mm, .00"/2.5mm, .20"/3.0mm
Three Phillips blades: #00, #0, and #
The precision-machined tips are top quality for an exact fit.

3555 T-Handle Tap Wrench for 1/4-1/2" Taps, Starrett $38.50


Ƚ Starrett T-handle tap wrench
Ƚ Starrett catalog number 93C
Ƚ For holding taps, drills, reamers, and other small tools to be turned by hand
Ƚ Fits fractional thread taps from /4-/2"
The body of this T-hadle tap wrench is centered, enabling the worker to use it on lathe centers or
on an upright drilling machine to start the tap straight. The jaws conform to the tool being held,
making it rigid and less apt to loosen. They are properly heat treated to withstand ordinary shop
use.
The wrenche has a sliding handle that is frictionally held. This feature permits the handle to be
removed entirely or positioned so that leverage can be applied when working in close quarters.
These tools are designed to hold square shanks. Round shanks can be gripped, but care must be
used. Excessive tightening may break the binding nut.

Tools & Things: X-Y Tables


2008 X-Y Table Assembly $132.95
This small precision X-Y table can be used on a drill press or other machine to precisely locate your
workpiece.
The table is 90 mm (3.54") by 200 mm (7.87"). It has three 8 mm T-slots.
The complete X-Y Table assembly is 0.5" wide, 8.5" deep and 2.5" high.
The X-axis travel is 35 mm (5.3") and the Y-axis travel is 70 mm (2.76").
The height of the table is 60 mm (2.36").
The base is 00 mm (3.94") by 75 mm (6.89").
The dials are graduated in 0.00" and one turn of the hand wheels moves the table 0.050".
The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.

(800) 981 9663 LittleMachineShop.com Page 111


Videos & Books: Books
Videos & Books: Books
Books for Machinists
Visit our Web site for a full description of these titles.

3128 Automated Machines and Toolmaking SALE $19.99


1735 Basic Machining Reference Handbook $42.95
3402 Home Machinist's Handbook $19.95
1596 How to Run a Lathe $7.95
3129 Machine Shop Basics SALE $19.99
2465 Machine Shop Essentials: Questions & Answers $44.95
3867 Machine Shop Know-How $49.95
2238 Machine Shop Methods $18.95
1738 Machine Shop Practice Vol 1 $29.95
1739 Machine Shop Practice Vol 2 $29.95
1597 Machine Shop Projects $11.95
3130 Machine Shop Tools and Operations SALE $19.99
2366 Machine Shop Trade Secrets $41.95
1736 Machine Shop Training Course Vol 1 $24.95
1737 Machine Shop Training Course Vol 2 $24.95
1788 Machinery's Handbook Pocket Companion $21.95
1743 Machinery's Handbook, 28th Edition, CD-ROM $94.95
1744 Machinery's Handbook, 28th Toolbox Edition $94.95
1740 Mathematics At Work $29.95
3565 Metalworking Sink or Swim $44.95
1600 Milling Machine Operations $9.95
2247 Mini Lathe Users Guide $5.95
2706 Mini Mill Users Guide $5.95
1522 Modern Machine-Shop Practice (CD-ROM) $5.95
1598 Running a Milling Machine $9.95
1594 Running An Engine Lathe $6.95
1953 Shop Reference for Students & Apprentices $26.95
1599 South Bend Lathe Booklets $7.95
1595 The Care and Operation of a Lathe $7.50
3110 Tools & Rules for Precision Measuring $1.95

Videos & Books: Videos


2007 DVD: 7x10 Variable Speed Mini Lathe Operations $43.00
This DVD video, by Jose Rodriguez, provides a four hour introduction to the use of the mini lathe.
The DVD has a menu that makes it easy to return to parts of the video that you want to see again.
Jose says: "This one has been a hot topic in recent months on the Net, the various metalworking
newsgroups and mailing lists. Now all of your questions, doubts and anything else you may have
been wandering about this tool will be answered in a four hour, no holds barred video
presentation. The tape will begin with a full tour of the tool, followed by a complete machining
presentation that should put to rest any fears or reservations you may have had about this tool
once and for all!!! Not only will you be shown just about every basic machining cut a lathe is able
to do, you will also see a complete "milling on the lathe " demonstration adapting the Taig vertical
milling slide to the mini lathe's cross slide. An extremely informative presentation that will also
double as a perfect machining mini-course."

(800) 981 9663 LittleMachineShop.com Page 112


Videos & Books: Videos
2566 DVD: Advanced Taig Micro Lathe Operations $43.00
This video, by Jose Rodriguez, provides a four hour lesson on advanced use of the Taig Micro Lathe.
Jose says: "See the Taig Micro Lathe perform some of the most unorthodox machining techniques
most thought were impossible. Learn how to make 60-50-40 hole indexing plates and how to use it
of the Taig. Get that tail stock set to within a few tenth in a couple of minutes with a simple shop
made test bar and TDI. See a heavy-duty motorized cross slide drill rig that will perform any radial
drilling as well as milling job. See a 50 division graduated dial being engraved with the use of a
simple device. Turn the Taig into a miniature 3 in  machining center. Would you like a graduated
carriage lead screw for your Taig? After viewing this video tape set, you will be able to make one
in one evening. Learn to make and use several flex shaft milling and grinding units for both the
cross slide and the vertical milling attached. How about auto feed for the carriage and cross slide!
These are just some of the fun subjects that will be covered in this new and unique production."

2564 DVD: Basic Taig Micro Lathe Operations $33.00


This video, by Jose Rodriguez, provides a two hour introduction to the use of the Taig Micro Lathe.
Jose says: "Would you like to be able to see for yourself what can be done on a Taig Micro Lathe
with just minimal tooling and expense? Are you somewhat undecided about acquiring one of these
small but very capable tools and somehow wished you could just see one being put through its
paces before opening your wallet? Well, wait no more! Finally there is a video that will answer
most of your basic questions about this lathe.
Initial setup hints will be discussed, during a thorough tour of the lathe and its basic components.
This will be followed with a complete hands-on demonstration of all the basic machining
operations possible on this tool. These will include facing, Turning, Grooving, cut-off or parting
cuts, chamfering, center drilling, drilling, reaming, tapping, thread cutting with a die, boring cuts,
milling, and much more!"

2365 DVD: Build a Milling Machine $70.00


This DVD, by Jose Rodriguez, provides complete instructions for building a milling machine.
Jose says: "In this nearly 2 hour long video marathon, you will witness the seemingly impossible!
Observe the author as he builds a fully operating and capable 80 pound variable speed milling
machine with existing TAIG Micro lathe components and readily available stock aluminum
material. A commercial heavy duty X & Y milling table is utilized to complete the project. This is
definitively not a "TOY" but a complete milling center that will outperform just about anything in
its class. For a total expenditure of less than $300. You too could have a tool that will perform
better than milling machines costing more than twice as much. This video will take you through
every step from its initial conception and planning to and beyond its very successful conclusion in
painstaking detail so that you too will be able to easily duplicate this achievement! As an extra
bonus, you will be treated to a fully narrative and visual step by step presentation on the building
of a 60: geared dividing head that with the addition of a simple shop made indexing accessory will
allow it to divide anything into as many as 2,600 equal divisions and for that matter, any other
number divisible into that. You will also learn how to easily cut perfectly fitting dovetailed sliding
joints with the simplest of equipment. These two items alone would be worth the price of this
video set. See how to produce a professional quality engraved dial with nothing more than a small
lathe ( TAIG ). You will see each component being worked, fitted and assembled as the unit is
magically transformed more and more into a "REAL" milling machine. The final two hours or so will
be devoted to a full battery of milling operations performed on real components that make up part
of the geared dividing head including other milling goodies. During the filming of the final milling
tests, cuts were routinely taken on 606-T6 alloy to depths of over 90 thou with a common
imported /4" diameter four flute end mill. We do not recommend that you routinely cut to those
depths but it sure is nice to be able to so when needed.
This a definite "MUST" for anyone who has grown tired of using alternative milling methods but
either is not ready to invest the big bucks for a commercially available bench top milling machine
or simply not satisfied with what’s presently available out there.

(800) 981 9663 LittleMachineShop.com Page 113


Videos & Books: Videos
2193 DVD: Building a Spindle Gauge for the Mini Lathe $33.00
This video, by Jose Rodriguez, provides a 2 hour study on how to build a spindle gauge to check
the size of adapters and other accessories you make to fit the spindle of your lathe.
Jose says: "Make all the spindle accessories you will need for your lathe with a simple, easy to
make spindle gauge. This tape will take you through a full two hour, detailed demonstration on
how to make a precision spindle gauge directly on your 7 x 0 that you can then use to machine
matching spindle tooling not presently available for this lathe. All this without having to remove
the chuck! You will need to remove it only once in the beginning to take two initial micrometer
measurements for the diameter and thickness of the mounting back plate / flange. The author has
adapted a four jaw chuck for it, has made a slotted face plate, a driving catch plate and dog clamp
and is presently working on a collet chuck with frontal collet closer that will directly mount to the
spindle. A must have for those wishing they could have more spindle tooling than just the three
jaw chuck the lathe comes equipped with!"

3820 DVD: Building a Vertical Boiler $29.95


Ƚ Build a propane fired vertical boiler
Ƚ Boiler is 3.3" in diameter and 2.5" tall
This video shows you how to make a propane fired vertical boiler. The boiler size is suitable to
power engines that are sold on this site and also an engine such as the Stuart 0H. There are many
helpful tips that will help the first time boiler maker construct a safe and sound boiler. You will
also see the many jigs built to ease the building process. Some are not necessary, but with all the
jigs, the construction of a second boiler will be much easier and faster.
The video covers: Caution page, Introduction clip, Trimming and drilling the 3” tube, Trimming
and drilling the fire tube, Milling the firebox, Cutting the ring from the coupler, Flanging the base,
Completing the fire tube, Flanging the end caps, Making the door box, Making the hinges, Milling
the door box, Making the burner holder, Making the burner, Boiler components, Boiler bushings,
Hydro testing the boiler, Steaming the boiler, Conclusion, Resources.

3484 DVD: Building the Oscillating Cylinder Steam/Air Engine SALE! $24.95
Ƚ Mini Machines 202 series
Our Oscillating Steam Engine kit is suitable for almost any level of machinist to build. The simple
design of the engine makes it function on basically three moving parts! On this video, SwarfRat
builds the engine on-camera.
The engine is rather homely in its stock state, but SwarfRat shows you how -- with just an hour or
so of extra work -- to transform it from an 'ugly duckling' into a 'swan'!

Best of all, the principle of the oscillating cylinder can be put into use for much more complicated
projects. SwarfRat took the basic kit and a few inches of aluminum stock to make another simple
cylinder and piston, ending up with a variable-angle twin cylinder engine.
You could easily make multi-cylinder engines in boxxer, V-twin or radial format using this
principle, and they'd be buildable with only basic machinist skills. This is truly a learning
experience.

The DVD includes (on disk, not printed) a complete set of drawings for the engine, a materials list,
and instructions.

3111 DVD: Cutting Threads on the Mini Lathe SALE! $39.95


Ƚ Two DVD set
Ƚ Includes video and ThreadBuddy software
Mini-Machines 0: Cutting V-Form Threads on the Mini Lathe plus ThreadBuddy V2.0 software.
This video covers cutting external and internal V-form threads from basic theory to practice.
Everything is clearly explained with charts, graphics and on-camera demos that will have you
confident of success.
We'll show you how to size your threads for precise, strong engagement, and point out the pitfalls
that trip up many newcomers.
Also included is an end user license for our Threadbuddy software. Threadbuddy does the math to
calculate V-form thread dimensions. Enter the size and pitch of your desired part, and
Threadbuddy will handle the number-crunching instantly

(800) 981 9663 LittleMachineShop.com Page 114


Videos & Books: Videos
2245 DVD: Edge Finding and Location $24.95
Mini-Machines 0: Edge Finding and Location by SwarfRat Enterprises, LLC.
This video demonstrates the many uses of the common edge finder and wiggler, explaining not just
the how, but also the why, with detailed camera work, animations and charts that'll have even the
novice quickly getting precision results.
Topics covered are: Finding the edge with the wiggler and edge finder, locating points on X-Y
coordinates, locating the center of a hole or bore, finding the center and edge of a shaft, laying
out your work with metal dye or CAD printouts, using the wiggler's needle tool to square the
workpiece and locate existing lines and coordinates. Also included is a short section on general
shop safety.
Running time: Approx. 43 minutes.

2684 DVD: Lathe Fundamentals & Basic Turning $21.95


Mini-Machines 0: Lathe Fundamentals & Basic Turning by SwarfRat Enterprises, LLC.
This video is designed to get you familiar with the lathe and its terminology, and take you all the
way through to making your first cuts. The topics covered include introduction and shop safety,
nomenclature and terminology, setting up and using your 3-jaw chuck, cutting tool types, shapes
and uses, successfully dealing with backlash, setting cutting tool height, calculating depth of cut,
face cuts, basic turning, compound angled cuts, using the lead screw, calculating TPI on double
reduction, feeding normal cuts, and finish cuts. Also included is a short section on general shop
safety.
Running time: Approx. 65 minutes.

2396 DVD: Lathe Tool Sharpening and Other Things $30.00


This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe
cutting tools and other grinding tasks.
Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-
top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel.
Produce a 60 degree threading tool that is as good as any commercially available threading tool
bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old
jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills
and get many more hours of work out of them. Regrind screw driver tips to keep them from
slipping off screw heads.
Grinding is an art that can take months or years to fully master but with the right grinder and a bit
of patience, you will be able to produce perfect results right in your shop.

2055 DVD: Make a Miniature Boring Head $30.00


This DVD, by Jose Rodriguez, provides complete instructions for making a miniature boring head.
The DVD has a menu that makes it easy to return to parts of the video that you want to see again.
Jose says: "Watch the author as he builds a fully operational and capable boring head. In this
almost two hour video you will learn in full detail how to make a boring head with micrometer
adjustment feature with very little material and equipment. In fact, although the author uses his
home made milling machine to build it, it could be easily built using the TAIG lathe plus milling
attachment. You will see the dovetailed components being built from layout to finish. The unit
takes /4" shank shop made boring bars which you will see as well, although commercial 3/8" bring
bars could be substituted instead. The idea here was to make a miniature version of a
commercially available boring head complete will all the normal features found on them, but only
about /2 the overall size. Small machines such as the Taig Micro mill and Sherline milling
machines will vibrate when a full size boring head is installed with the head offset even a small
amount. This unit is small, compact, but extremely strong and stiff. This will be evident at the end
of the video during the actual test, boring out of an existing bore on a work piece. The head itself
is adjustable in thousands of an inch with its graduated screw and its male dovetail is kept snug or
fully locked during cutting by three gib screws. This unit has a real brass gib rather than the usual
practice of slitting the female dovetail to create a pseudo gib. All in all, for the cost of a pack of
cigarettes you make a great addition to your tool shelf that will perform for you for a lifetime."

(800) 981 9663 LittleMachineShop.com Page 115


Videos & Books: Videos
2057 DVD: Making Gears the Easy Way $43.00
This DVD, by Jose Rodriguez, provides a four hour introduction to making gears.
The DVD has a menu that makes it easy to return to parts of the video that you want to see again.
Jose says: "Have you forgone the pleasure of building a small geared engine simply because the
thought of having to cut your own gears brings a shiver down your metalworking spine? Even if can
muster up the nerve, you realize that so called involute gear cutters cost an arm and a leg. Then
you need a set of eight cutters to enable you to cut the entire range of teeth for 2 to Rack. The
cost in cutters alone can reach well over $200 before you even begin thinking about arbors to hold
them.
It’s no wonder many of us will simply go to the nearest gear vendor and put down $50 -$60 for a
pair of brass spur gears.
In this video you will learn the secrets of the HOB. You will not only learn how to use a hob, but
you will also learn how to build one from scratch right on your small to medium size lathe and
small milling machine. For a total cost of about $3 in materials you can make a hob that will not
only enable you to EASILY make any number tooth spur gear as well as even a worm and worm
gear.
You will be amazed at how simple gear making can be!
You can make any diametral pitch hob by simply following the easy Diametral Pitch chart that is
included as part of the video. The video shows a /0 pitch spiral and straight hob being made and
then used to make gears of various diameters. You will not need to compute anything. All basic
diameters for gear blanks for gears of any numbers of teeth will also be included in the package. If
you rather use a calculator to figure out diameters, easy formulas for that are also included.
Once you have used a HOB to cut a gear you will wonder why you would use anything else!"

2637 DVD: Mill & Lathe Spindle and Gearbox Repair $24.95
Mini-Machines 0: Mill & Lathe Spindle and Gearbox Repair by SwarfRat Enterprises, LLC.
We don't like to think about it, but machines break, and always at the worst possible time. This
video shows you how to do spindle and gearbox repairs on both the mini mill and the mini lathe.
You will see how to do a total drive train teardown, rebuild and reassembly of both machines.
You'll learn how to tear down and reassemble the entire unit in just a few hours, using a simple set
of spacers and plates to enable you to press your spindle and bearings in and out of the machine.
There is also a CD-ROM included with mechanical drawings in multiple formats of these simple
repair tools designed by Chris Wood of LittleMachineShop.com. You can make these tools yourself;
just make sure you do it before your machine breaks!
Running time is approximately 75 minutes.

2267 DVD: Milling on the Drill Press $43.00


This video, by Jose Rodriguez, provides a four hour introduction to milling on a drill press.
Jose says: "Are you tired of avoiding machine projects simply because you do not own or have
access to a milling machine? Learn some of the secrets to successful milling techniques utilizing
your existing lathe as well as a drill press. I know what you must be thinking. This guy must be
crazy! Milling on a drill press? I, as well as none other than Rudy Kouhoupt, have been doing just
that very thing for years now with entirely good results in finish as well as dimensional accuracy.
You will also see the Taig Micro Lathe being put trough its paces milling a workpiece held on the
cross slide as well as with the vertical milling accessory. See the Taig with the externally mounted
modified micro drill press to convert it into a miniature 3 in  machining center. See the 7 x 0
mini lathe in conjunction with the Taig Vertical Milling accessory performing milling cuts with
hardly an effort. We finish the presentation with the 8" modified drill press performing milling on a
rough block of stock held on a great little shop made milling vice. This the only drill press with a
micrometer operated locking spindle. See it being used and you too will marvel at its simplicity.
After viewing this tape, you too should be well on your way to the pleasures of milling without
having to own a milling machine."

(800) 981 9663 LittleMachineShop.com Page 116


Videos & Books: Videos
2884 DVD: Milling, Flycutting & Dovetailing $24.95
Mini-Machines 0: Mini Mill Basics, Milling, Flycutting & Dovetailing by SwarfRat Enterprises, LLC.
This video will help you make clean and precise cuts on your workpiece.
Some of the topics on this video include: Conventional vs. climb milling and the uses of each; End
mills, special cutters and nomenclature; Different methods for setting the Z-axis starting point for
accurate machining; Squaring the workpiece and strategies for holding un-square stock; Finishing,
deburring and breaking corners; Using single-point flycutters to create flawless finishes, Deburring
and setting up workpieces for close-tolerance breaking of corners and chamfering; Milling deep
features; Setting up and cutting dovetails; Finding the center of a hole or bore using a test
indicator and using a co-axial indicator.
Also included is a short section on general shop safety.
Running time: Approx. 68 minutes.

3141 DVD: Mini Machines 101 Complete Mill Series $129.95


Ƚ Six DVD set includes the entire Mini Machines 0 Mill Series
The complete set of Mini Machines 0 Mill Series is available in this single, discounted price
package.
This set includes:
Volume I: Mini Mill Basics, Clamping & Fixtures
Volume II: Edge Finding and Location
Volume III: Precision Drilling, Reaming & Tapping
Volume IV: The Boring Head; Bores, Arcs, Saddles & More
Volume V Teardown, Tuning & Tramming
Volume VI: Milling, Flycutting & Dovetailing

2324 DVD: Mini Mill Basics, Clamping & Fixtures $24.95


Mini-Machines 0: Mini Mill Basics, Clamping & Fixtures by SwarfRat Enterprises, LLC.
This video discusses and illustrates the basics of the mini mill, starting with the terminology that
one needs to communicate successfully with other machinists, all the way through to specialized
fixtures and bedplates designed to make multi-part production faster and more accurate. With
liberal use of animations, illustrations and actual on-screen setups, the information is clearly
presented and easily understood. The DVD chapter format makes it easy to go back and review
sections over again.
Topics covered are: Terminology and nomenclature, tools and equipment, basic principles of
clamping, squaring (aligning) the stock, squaring round stock, setting up and tramming the
screwless vise, bedplates and specialized fixtures. Also included is a short section on general shop
safety.
Running time: Approx. 50 minutes.

2410 DVD: Precision Drilling, Reaming & Tapping $24.95


Mini-Machines 0: Precision Drilling, Reaming & Tapping by SwarfRat Enterprises, LLC.
This video shows you how to drill and ream for precision press and slip fits, as well as how to tap
accurate threads, and plunge mill flat-bottomed recesses for fastener counter bores.
It also introduces the spindle and tapers, collets and tool holders, as well as all sorts of regular and
specialized drill bits, reamers and taps.
Learn to use the telescoping gauge and outside micrometer for precise bore measurements, and
how to use a dial indicator in conjunction with a wiggler for close tolerance work.
Topics covered are: Using a wiggler and dial indicator for backlash removal, using telescoping
gauges and a micrometer to measure holes, drilling, reaming and tapping tools, drilling and
reaming, tapping threads manually, plunge milling counter bores. Also included is a short section
on general shop safety.
Running time is approximately 55 minutes.

3441 DVD: Sherline Lathe Basics $49.95


Ƚ How to set up and operate the Sherline lathe
Sherline Lathe Basics gives a great introduction to using the Sherline lathe.
Topics covered include turning, facing, boring, workholding, eccentrics, tapers, threading, tool bit
grinding, backlash, setting tool height, cleaning a chuck, hand wheel dial adjustment, using the
follower rest, mounting the lathe aligning the headstock and milling.
Approximate running time: 23 minutes.

(800) 981 9663 LittleMachineShop.com Page 117


Videos & Books: Videos
3440 DVD: Shop Secrets Volume 1: Measuring Tools $39.95
Ƚ Teaches you to operate and maintain precision measuring equipment
Ƚ Easy-to-understand words, diagrams, and three-dimensional graphics explain
operation of the tools
Ƚ Covers equipment that even experienced machinists may not know how to operate
Shop Secrets, Volume  Is a two-hour video on the use and care of machinist measuring tools and
related machine shop operations. Produced for the beginning machinist, this video is in use at
technical high schools in the US and in industry both in the US and the Far East.
Topics include adjustable parallels, backlash, calipers, combination squares, optical comparator,
dial indicators, edge finders, left-handed lead screw operation, micrometers, precision squares,
radius gages, shop safety, small hole gages, thread gages, telescoping gages, thread pitch gages,
vernier scales, vision assists, wigglers, steel rules.
Running time: :52 hours.

2537 DVD: Teardown, Tuning & Tramming $24.95


Mini-Machines 0: Teardown, Tuning & Tramming by SwarfRat Enterprises, LLC.
This video guides you step-by-step through a complete disassembly and reassembly of ALL three
axes of the mini mill. It shows you how to adjust the gibs to remove play and yet allow free
movement of the mill bed and spindle head.
Learn how to adjust the hand wheel assemblies to remove unnecessary backlash, and to align the
X- & Y-axis screws with their respective nuts so as to avoid binding during table travel.
See the easy way to tram your mill spindle to closer than 0.00" in all three axes.
This volume is jam-packed with easy-to-follow practical information that is absolutely necessary if
you intend to make precision parts!
Running time is approximately 55 minutes.

2447 DVD: The Boring Head: Bores, Arcs, Saddles & More $24.95
Mini-Machines 0: The Boring Head: Bores, Arcs, Saddles & More by SwarfRat Enterprises, LLC.
This video shows you how to use the boring head, not only to accurately enlarge holes and cut
bores for your projects, but also how to use the tool in non--centered operations, such as truing up
elliptical holes and cutting arcs into flat stock, as well as cutting saddles into round stock.
This tool has a much wider range of uses than you might imagine!
Topics covered are: Introduction and safety, Centered operations theory and practice, Non-
centered setup, cutting a saddle in round stock and alternate uses.
Running time: Approximately. 45 minutes.

2056 DVD: The Milling Machine and its Uses $43.00


This DVD, by Jose Rodriguez, provides a 4 hour introduction to the use of the milling machine.
The DVD has a menu that makes it easy to return to parts of the video that you want to see again.
Jose says: "This brand new video tapes was just produced in 99 as a result of the most ambitious
project undertaken by the author. It features his shop made modelmaker's variable speed milling
machine. The video is basically a complete basic milling operations course but rather than boring
the viewer with dozens of unrelated procedures, you get to see the author produce a dovetailed
tool block for his quick change tool system he designed for his 7 x 0 mini lathe. This is a four hour
presentation that will leave you asking for more, even after four fun packed hours."

3406 DVD: The Rotary Table SALE! $39.95


Ƚ Two DVD set
Ƚ Includes video and SpinBuddy software
Mini Machines 202: The Rotary Table: Curves Ahead plus SpinBuddy software
This video will show you how to use a rotary table to cut circles, curves, arcs, as well as to
perform precision repetitive operations such as bolt circles, gear and sprocket teeth, scale
engraving and more. It will show you how to set up, calculate and use your mini rotary table.
Topics include: Introdution and Safety, Setting Up the Rotary Table, Varying Degrees of Degrees,
Dialing Degrees, Minutes and Seconds, Dividing Plate Setup, Dividing Plate Calculations, Bed Plate
Basics, Using the Rotary Table Horizontally, The Quick Indexer Fixture, Laying out and Visualizing
Offsets, and Installing and Using the SpinBuddy Software.

(800) 981 9663 LittleMachineShop.com Page 118


Videos & Books: Videos
3567 DVD: The Vise Squad - Precision Workholding and Measuring Techniq SALE! $19.95
Ƚ Mini Machines 202 series
Have you wanted to learn how to use a sine bar? How to set up and hold a precise angle when
milling a part? How to deal with the trigonometry involved with finding the correct spaceblock
height for a sinebar or vise?
This volume will demonstrate and explain the use of precision, Kurt style and Sine vises, as well as
sine bars and sine plates.
Some of the topics covered are: Intro & Shop Safety, General vise mounting and basics, Screwless
precision and sine vises, Angle plates, Law of Sines
Space blocks, Sine bars, plates, vises, compound angles, Kurt Anglelock Vise, and angular
tramming.
With the purchase of this DVD, you've also purchased a single-user license to use the SineBuddy
sine bar & space block calculator included on the DVD. This calculator takes care of the
trigonometry involved in calculating angles and spaceblocks.

2054 DVD: Threading on the Lathe $33.00


This DVD, by Jose Rodriguez, provides a 2 hour introduction to threading on the mini lathe.
The DVD has a menu that makes it easy to return to parts of the video that you want to see again.
Jose says: "Finally the mystery of thread cutting has been made simple enough for the first time
user! In this two hour video tape you will see and learn the easy way to cut with taps, dies as well
as perform external and internal single point threading operations. Learn the secrets of that
"DREADED" threading dial as well as how to avoid using the dial altogether if you chose to. The
perfect companion to have along when you are ready to produce extremely true running threads
for all your projects!"

2927 DVD: Toolmaking & Restoration SALE! $19.95


Mini Machines 0 General Machinist Series
Toolmaking & Restoration by SwarfRat Enterprises, LLC.
This video delves into the art of restoring damaged parts, as well as how to design and fabricate
special tools for our projects, whatever they may be.
Have you ever had a part with the threads so damaged that you can't put a die over them to clean
them up? This video demonstrates with a 40-year-old oil pump shaft from a vintage Italian
Aermacchi engine, where the shaft was so mushroomed on the end as to be worthless. Learn the
technique to synchronize the lathe to the existing threads, enabling you to re-cut the damaged
threads and save the part.
It shows you how to measure and lay out a complex bolt pattern from the same engine manually,
and tricks for doing it with a CAD program.
Then the video shows how to use the layout to make a universal press and separator tool, as well
as flywheel and armature pullers; tools that are no longer available, yet necessary to disassemble
the motor. Along the way, it discusses material and design considerations for tooling in general.
For those of you who haven't yet cut threads with your mini lathe, this is a great introduction to
the process.

3123 DVD: Work Holding on the Mini Lathe SALE! $24.95


Ƚ Includes video and ShopBuddy software
Mini-Machines 0:Beyond the 3-Jaw Chuck: Foru-Jaws, Faceplates, Fixtures & More on the Mini
Lathe plus ShopBuddy software.
This video is designed to familiarize you with alternate methods of work holding that will allow you
to use your mini lathe to its full potential.
Some of the topics covered are shop safety, setting up and using a 4-jaw chuck, centering round
stock, centering non-round stock, tailstock & laser methods of centering, using the lathe wiggler,
faceplate operations, turning between centers, and using fixtures for large work pieces.
Also included is an end user license for our Shopbuddy software. Shopbuddy does the math to
calculate V-form thread dimensions. Enter the size and pitch of your desired part, and Shopbuddy
will handle the number-crunching instantly
Running time: Approx. 55 minutes.

(800) 981 9663 LittleMachineShop.com Page 119


Vises: Accessories
Vises: Accessories
Vise Comparison
See the vise comparison chart at the back of this catalog.

Vises: Milling Vises


1647 Vise, 3" Milling $54.95
This 3" milling vise is good for general mill work.

1699 Vise, 3" Precision Milling, Heavy $99.95


Ƚ Precision 3" Kurt-style milling machine vise
Ƚ Detachable swivel base features easy to read divisions
Ƚ Hardened replaceable jaws
Ƚ The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground
The replaceable jaws can be mounted on either end of the fixed and movable jaw supports
providing a wide range of clamping distances.
1789 Jaws, 3" Precision Milling Vise $14.95
3710 Jaws, 4" Precision Milling Vise $14.95
3070 Soft Jaws, 3" Vise $14.95
3443 Soft Jaws, 4" Vise $15.95
3125 Vise Mounting Kit $9.95

1904 Vise, 3" Precision Milling, Phase II $129.95


Precision 3" accu-lock milling machine vise with swivel base.
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.
The jaws are hardened and ground.
The detachable swivel base features easy to read divisions.
2500 Vise, 3" Precision Milling $89.95

3857 Vise, 4" CNC Mill $179.95


Ƚ Lock down type
Ƚ Compact size alows multiple vises on CNC mill table
Ƚ Flatness of all sides within 0.00"
Ƚ Mount upright, or on left or right sides
Ƚ Sides parallel within 0.0005" in 4"
This vise is designed for CNC milling machines where a swivel base is never required. The compact
size allows you to mount multiple vises on the CNC mill table so you can machine several items in
one setup.
The vise closes with up to 3000 N (675 lbs) of clamping force.

1755 Vise, 4" Precision Milling, Heavy $129.95


Precision 4" Kurt-style milling machine vise with swivel base.
The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.
The jaws are hardened and ground.
The detachable swivel base features easy to read divisions.
The jaws are 4" wide, .8" deep and open 4".
With the base, the vise is 9" wide, 3.4" long, and 4.72" high.
Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in
4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the
ways of the vise are parallel to the base of the vise within 0.0008" in 4".

(800) 981 9663 LittleMachineShop.com Page 120


Vises: Other Vises
Vises: Other Vises
2351 Hand and Bench Vise, Starrett $204.00
Ƚ Starrett combination hand and bench vise
Ƚ Starrett catalog number 86A
Ƚ Use as a hand vise or a bench vise
Ƚ Wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers
Ƚ Approximately /2-2 /8" (3-54 mm) in thickness
This combination hand and bench vise has a wide range of uses for all toolmakers, mechanics,
hobbyists and do-it-yourselfers. When a vise is needed at different locations for convenience, this
tool is indispensable. By removing the handle and substituting the clamp, the tool may be fastened
to benches, shelves, and so on.
It is approximately /2-2 /8" (3-54 mm) in thickness, and can be adjusted to different positions
according to the user's preference.
When used as a hand vise, the leverage obtainable with the ball end lever will be appreciated in
comparison with a wing nut commonly employed for this purpose. The jaws are made from forgings
and are properly tempered.

1276 Vise, 2" Quick $35.95


This is our smallest vise. The ratchet device makes it quick to adjust.
The jaws are 50 mm (.95") wide.
The jaws are 6 mm (0.63) deep and open to 38 mm (.48") capacity.
The vise is 40 mm (5.50") long.

3643 Vise, 3.5" 0-90° Tilting $26.95


Ƚ Full 90° horizontal to vertical adjustment
Ƚ Multiple bolt slots in base for easy mounting
Ƚ Angle dial on one side and locking knob on opposite side
The jaws are 3.5" wide, .25" deep, and open to 3..25" capacity.

3899 Vise, 4" Cross-Sliding $54.95


Ƚ 4" travel in both X and Y directions
Ƚ Multiple bolt slots in base for easy mounting
Ƚ Dials graduated in 0.00" increments
Ƚ Balanced ball crank handles
Jaws are 4" wide, .44" deep, and open to 3.75". The base is 5" x 0.5".
This is a better version of the vise that is mentioned in the April/May 200 issue of American
Woodworker.

1145 Vise, 4" Quick $47.95


Ƚ Designed specifically for use on the mini mill
Ƚ Ratchet device makes it quick to adjust
The jaws are 00mm (3.94") wide.
The jaws are 0.88" deep and open to 3.23" capacity.
The vise is 0.50" long.
The base of the vise is 200 mm by 90 mm. The slots are 2 mm wide. The slots are 80 mm apart,
and there is 40 mm between the radiused ends of the slots.

3524 Vise, Universal Movement $495.95


This fixture is composed of two parts; a precision vise and a swivel angle plate base
Vise revolves 360° horizontally with 3’ engraved graduations and 45° vertical with 3’ engraved
graduations
Hex wrench included for locking vise at any position
Vertical angle can be adjusted with fine adjustment knob
Hardened and precision ground parallel and square within 0.0004”
Unique universal movement for precision grinding, machining, boring and other applications

(800) 981 9663 LittleMachineShop.com Page 121


Vises: Screwless Vises
Vises: Screwless Vises
1590 Vise, 3" Screwless $49.95
This high precision toolmakers screwless vise has a one-piece body. The body and jaws are
hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and
vertical vees on the inside face of the movable jaw to hold round objects.
The jaws are .38" deep and open to 3.78" capacity.
The vise is 7.28" long, 2.76" tall and 3.00" wide.
2675 Clamps, Screwless Vise $19.95
3142 Vise, 1" Screwless $34.95
1591 Vise, 2" Screwless $44.95
3769 Vise, 2" Screwless with 3" Thin Parallels $59.90
3763 Vise, 3" Screwless plus Parallels and Mounting Clamps $99.85
2356 Vise, 3" Screwless with Clamping Slots $79.95
3767 Vise, 3" Screwless, with Hold Down Clamps $69.90

1756 Vise, 3" Sine Screwless $109.00


3" Precision screwless sine vise.
Jaw width is 3.5", jaw depth is .25", jaw opening is 4".
The base size is 7.638" x 3.5".
The center distance of the cylinders is 5.000".
Hardened and precision ground to a tolerance of .0004” for both parallelism and squareness.
Sine range: 0 - 60°.
Jaw can be opened or closed without unbolting vise from work surface.
1757 Space Block Set $44.95

(800) 981 9663 LittleMachineShop.com Page 122


Part no. 1276 1145 1647 2500,1904 1699 1755 3142 1591 1590, 2356 1756

Description 2" Quick 4" Quick 3" Milling 3" Precision 3" Precision 4" Precision 1" Screwless 2" Screwless 3" Screwless 3" Screwless
Vise Vise Vise Milling Vise Milling Milling Vise Vise Vise Sine Vise
Vise, Heavy Vise, Heavy

Price $35.95 $47.95 $54.95 $89.95, $129.95 $99.95 $129.95 $34.95 $44.95 $49.95, $79.95 $109.00

Jaw width 1.95" 3.94" 3.15" 3.1" 3.15" 4" 1.00" 1.97" 2.88" 3.15"
Vise Comparison

Jaw depth 0.63" 0.88" 1.21" 1.0" 1.04" 1.18" 0.36" 0.98" 1.38" 1.25"

Maximum 1.48" 3.23" 2.56" 2.85" 3.0" 4.0" 1.00" 2.39" 3.95" 4.0"
jaw
opening

Swivel base No No Yes Yes Yes Yes No No No No

Weight 1.7 lbs 11 lbs 13.5 lbs 19 lbs 22 lbs 35 lbs 0.5 lbs 3 lbs 8.5 lbs 10 lbs

Height 1.55" 2.63" 3.60" 3.87" 4.21" 4.72" 1.14" 1.95" 2.76"
(w/o base) (2.75") (2.87") (3.05")

Length 5.50" 10.50" 8.63" 10" 10.85" 13.4" 2.57" 5.32" 7.63" 7.63"

Width 2.35" 3.92" 6.30" 7.25" 7.75" 9" 1.00" 1.97" 2.88" 3.05"
(w/o base) (4.10") (5.5") (5.15")

Mounting 1.78" 2.20" 5.50" 6.38" 6.50" n/a n/a n/a n/a
bolt (3.00") (3.95") (4.25")
centers
(w/o base)

Hold-down No No No Yes Yes Yes Yes Yes Yes Yes


mechanism
Rotary Table Comparison

Part number 1810 1927 1727 2326 1787

Description Rotary Rotary Rotary Rotary Rotary


Table, 4" Table, 4" Table, 4" Table, 6" Table, 6"
Precision H/V Phase II Precision Phase II

Price $169.95 $249.95 $279.95 $249.95 $295.95

Diameter 4" 4" 4" 6" 6"

Thru hole 2 Morse 2 Morse 2 Morse 2 Morse 2 Morse


Taper Taper Taper Taper Taper

Horizontal Yes Yes Yes Yes Yes

Vertical Yes Yes Yes Yes Yes

Flatness 0.0008" 0.0006" 0.0006" 0.0008" 0.0006"

Parallelism 0.0008" 0.0008" 0.0008" 0.0008" 0.0008"

Squareness 0.0012" 0.0004" 0.0004" 0.0012" 0.0004"

Height 2.87" 2.76" 2.76" 3.70" 3.35"

Vertical center height 2.68" 2.76" 2.76" 3.86" 4.92"

Ratio 72 to 1 72 to 1 72 to 1 72 to 1 90 to 1

Weight 16 lbs. 14 lbs. 14 lbs. 34 lbs. 66 lbs.

Rotational accuracy 10 seconds 10 seconds 10 seconds 10 seconds 10 seconds

T-slot size 8 mm 6 mm 6 mm 10 mm 10 mm

Tail stock (part number) 1812 1800 1800 2327 1802

Dividing plate set (part 1811 1799 1799 2328 1801


number)

Set including table, 2183 1931 2329 3566


tailstock, dividing plate, 3131 3791
and chuck (part number) 3132 3792
Indexable Inserts
To work with these tools… Use these high speed steel inserts… Or these carbide inserts

Part Part Corner Part Industry Corner


no. Tool or set no. Industry number radius no. number radius

1913 1/4" Turning Tools 2033 TCMT-1.81.51 1/64"

1719 1/4" Turning Tools, 1722 TPMW-1.81.5.5 0.008"


A R Warner 1723 TPMW-1.81.51 1/64"

3693 1/4" Turning & 3/8" 3696 CCMW-2-1.5-1 1/64"


Boring Tools, A R Warner 3697 CEMW-2-1.5-1 1/64"

1669 3/8" Turning Tools, 1724 TCGW-21.51 1/64" 3416 TCMT-21.50 0.008"
Phase II 1725 TCGW-21.52 1/32" 1670 TCMT-21.51 1/64"
3417 TCMT-21.52 1/32"

1679 3/8" Turning Tools 1680 TCMM-221 1/64"

1619 3/8" Turning Tools, 1624 TPMW-221 1/64"


A R Warner 1621 TPMW-222 1/32"

3694 3/8" Turning and Boring 3696 CCMW-2-1.5-1 1/64"


Tools, A R Warner 3697 CEMW-2-1.5-1 1/64"

2286 1/2" Turning Tools 3698 TCMW-321 1/64" 2381 TCMM-321 1/64"

1620 1/2" Turning Tools, 1623 TPMB-321 1/64"


A R Warner 1622 TPMB-322 1/32"

3569 1/2" Turning Tools, 3573 CCMW-3-2.5-.5 0.008"


A R Warner 3574 CCMW-3-2.5-1 1/64"
3575 CCMW-3-2.5-2 1/32"

1779 3/8" Boring Bar, Phase II 3696 CCMW-2-1.5-1 1/64" 1781 CCMT 21.51 1/64"

1720 3/8" Boring Bar, 1722 TPMW-1.81.5.5 0.008"


A R Warner 1723 TPMW-1.81.51 1/64"

1780 1/2" Boring Bar, Phase II 3573 CCMW-3-2.5-.5 0.008" 1795 CCMT 32.52 1/32"
3574 CCMW-3-2.5-1 1/64"
3575 CCMW-3-2.5-2 1/32"

1721 1/2" Boring Bar, 1624 TPMW-221 1/64"


A R Warner 1621 TPMW-222 1/32"

2431 Profiling Tool, 3/8" HSS 3470 VCMW-222 1/32" 3471 VCMT-222 1/32"
& Carbide Inserts

3695 3/8" Threading Tool, 3468 TNMC-32-MV 0"


A R Warner 3469 TPMC-32-MV 0"

3467 Threading Tool, 1/2" 3468 TNMC-32-MV 0"


Indexable HSS Inserts 3469 TPMC-32-MV 0"

3572 Grooving & Cutoff Tool, 3576 1/64" (0.015") Groover 0"
A R Warner 3577 1/32" (0.031") Groover 0"
3578 1/16" (0.062") Groover 0"

1146 3MT Indexable End Mill 1216 TPCN1603PDR

1889 2MT Indexable End Mill 1910 TPCN1103PDR

1952 R8 Indexable End Mill 2277 TPG322


Lathe Chuck Capacities
3-Jaw Self Centering Lathe Chuck Capacities

Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws

2916 2" 3-Jaw 50 mm N/A 2–14 mm 25–33 mm


1.97" 0.08–0.55" 0.98–1.30"

1187 3" 3-Jaw 80 mm 16 mm 2-22 mm 22-63 mm


3.15" 0.63" 0.08-0.87" 0.87-2.48"

1698 4" 3-Jaw 100 mm 22 mm 2-30 mm 30-80 mm


1941 3.94" 0.87" 0.08-1.18" 1.18-3.15"

2337 5" 3-Jaw 125 mm 30 mm 2.5-40 mm 38-110 mm


2345 4.92" 1.18" 0.10-1.57" 1.50-4.33"

2028 6" 3-Jaw 160 mm 40 mm 3-55 mm 55-145 mm


6.30" 1.57" 0.12-2.17" 2.16-5.71"

4-Jaw Independent Lathe Chuck Capacities

Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws

1175 3"4-Jaw 80 mm 22 mm 5-40 mm 35-80 mm


3.15" 0.87" 0.20-1.57" 1.38-3.15"

1588 4" 4-Jaw 100 mm 25 mm 6-45 mm 40-100 mm


1697 3.94" 0.98" 0.24-1.77" 1.57-3.94"

2338 5" 4-Jaw 125 mm 30 mm 7-57 mm 48-125 mm


2346 4.92" 1.18" 0.28-2.24" 1.89-4.92"

2038 6" 4-Jaw 160 mm 45 mm 8-80 mm 50-160 mm


6.30" 1.77" 0.31-3.15" 1.97-6.30"

Special Lathe Chuck Capacities

Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws

3424 3" 4-Jaw 80 mm 16 mm 2-22 mm 22-63 mm


Self Centering 3.15" 0.63" 0.08-0.87" 0.87-2.48"

2361 4" 4-Jaw 102 mm 20 mm 3.5-32 mm 32-80 mm


Self Centering 4.02" 0.79" 0.14-1.26" 1.26-3.14"

2276 4" 6-Jaw 100 mm 26 mm


Self Centering 3.94" 1.02"
LittleMachineShop.com Order Form
Purchaser Ship to (if different)

Name Name
Address Address

Phone Phone

Email Fax

… I would like to receive occasional announcements of sales and new products by email.

Qty Part Description Unit price Total


number

Subtotal
Shipping & handling (see table below)

California residents add 8¼% sales tax

Total

Shipping & Handling: Web For next-day shipping and secure credit card
payment, place your order on our web site:
Less than $25.00 $7.00
www.LittleMachineShop.com
$25.00 to $49.99 $9.00
Mail Mail your order with your credit card information or
$50.00 to $74.99 $10.00 a check to:
$75.00 to $99.99 $11.00 LittleMachineShop.com
$100.00 to $12.50 396 W Washington Blvd Ste 500
$149.99 Pasadena CA 91103-2002
$150.00 to 8% of Phone Call us at 800 981 9663 or 626 797 7850 to place
$399.99 subtotal your order.
$400.00 or more 6% of Fax Fax this page with your credit card information to
subtotal 626 797 7934.
Ground service to US addresses Card
only. Contact us for rates for Number
other services and destinations.
Expiration Security
Date Code
PRSRT STANDARD
U.S. POSTAGE
The premier source of tooling, parts,
and accessories for bench top machinists. PAID
PASADENA, CA
PERMIT NO. 648
396 W Washington Blvd #500 • Pasadena, CA 91103

Das könnte Ihnen auch gefallen