Beruflich Dokumente
Kultur Dokumente
Ni-Alubronze N
S
Valves I
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
A
N
S
INDEX I
VALVE TYPE ENDS CONSTRUCTION CLASS SIZES FIGURE PAGE
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
A
N
S
FIGURE NUMBER INDEX I
FIG. PAGE FIG. PAGE FIG. PAGE
CFR-C958 35
CLR-C958 34
CSR-C958 33
CWR-C958 32
FHF-C958 39
FHL-C958 38
FHS-C958 37
FHW-C958 36
HFR-C958 39
HFT-C958 39
HLR-C958 38
HLT-C958 38
HSR-C958 37
HST-C958 37
HWR-C958 36
HWT-C958 36
MHF-C958 39
MHL-C958 38
MHS-C958 37
MHW-C958 36
1400-C958 4
1401-C958 5
1410-C958 11
1411-C958 12
1430-C958 17
1431-C958 18
1450 UB-C958 22
1608-C958 26
1608 RB-C958 26
1810-C958 20
1810 SB-C958 19
1811-C958 21
1820-C958 15
1820 UB-C958 13
1821-C958 16
1821 UB-C958 14
1840-C958 8
1850-C958 9
1850 UB-C958 6
1851-C958 10
1851 UB-C958 7
2238-C958 23
2238 FL-C958 25
2238 LUG-C958 24
7235-C958 30
7235 RB-C958 28
7236-C958 31
7236 RB-C958 29
7480-C958 27
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Threaded N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 150# I
Description
Ni-Alubronze gate valve, female threaded ends, Union Bonnet (UB), Inside Screwed Rising
Stem (ISRS), rising hand wheel, metal seated, back seat, pressure class 150#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-3” 150# 20.68 18.62 16.55 14.48 12.41 10.34 10.00 Barg
* Above P-T table is extracted from MSS SP-80 material B62. MSS SP-80 only lists P-T ratings for class 150# threaded valves in material B62 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B62 (Tin) bronze
Materials
Parts Description Figure 1400-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN L H øW Weight [Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Threaded N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 300# I
Description
Ni-Alubronze gate valve, female threaded ends, Union Bonnet (UB), Inside Screwed Rising
Stem (ISRS), rising hand wheel, metal seated, back seat, pressure class 300#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Face to Face In accordance with manufacturer’s standard, see below dimensions table
½”-3” 300# 41.37 38.61 36.20 33.78 31.03 28.27 25.86 23.44 Barg
* Above P-T table is extracted from MSS SP-80 material B61. MSS SP-80 only lists P-T ratings for class 300# threaded valves in material B61 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B61 (Tin) bronze
Materials
Parts Description Figure 1401-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN L H øW Weight [Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Flanged N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 150# I
Description
Ni-Alubronze gate valve, flanged ends (Flat Faced), Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, back seat, pressure class 150#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-3” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1850 UB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN ød L øD øW H Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Flanged N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 300# I
Description
Ni-Alubronze gate valve, flanged ends (Flat Faced), Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, back seat, pressure class 300#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 1851 UB-C958 Pressure Rating In accordance with ASME B16.24-Class 300#*
½”-1½” 300# 35.6 33.0 27.4 26.3 25.5 25.2 25.2 24.9 24.9 24.9 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1851 UB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN ød L øD øW H Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Flanged N
NAB (Ni-Alubronze) S
ISNRS, Bolted Bonnet, 150# I
Description
Ni-Alubronze gate valve, flanged ends (Flat Faced), Bolted Bonnet (BB), Inside Screwed
Non Rising Stem (ISNRS), non rising hand wheel, position indicator, pressure class 150#.
Technical Features
Design Generally in accordance with MSS SP-70 and ASME B16.34
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Position Indicator 2”-12” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1840-C958
Dimensions [mm]
DN ød øC øD n-h L H øW Weight
[Kg]
10” DN250 250 362.0 406 12-25 330 800 356 191
12” DN300 300 432.0 483 12-25 356 845 381 289
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Flanged N
NAB (Ni-Alubronze) S
OS&Y, Bolted Bonnet, 150# I
Description
Ni-Alubronze gate valve, flanged ends (Flat Faced), Bolted Bonnet (BB), Outside Screwed
and Yoke (OS&Y), rising stem, non rising hand wheel, back seat, pressure class 150#.
Technical Features
Design Generally in accordance with API 600
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 1850-C958 2”-24” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1850-C958
Dimensions [mm]
DN ød øC øD H L n-øh øW Weight
10” DN250 254 362.0 405 849 330 12-25.4 400 164 Kg
12” DN300 305 431.8 485 1053 356 12-25.4 450 235 Kg
12” * DN300 * 305 431.8 485 1053 356 12-25.4 500 285 Kg
14” * DN350 * 337 476.3 535 1353 381 12-28.6 500 397 Kg
16” * DN400 * 387 539.8 595 1428 406 16-28.6 500 511 Kg
18” * DN450 * 438 577.9 635 1700 432 16-31.8 630 729 Kg
20” * DN500 * 489 635.0 700 1850 457 20-31.8 710 911 Kg
24” * DN600 * 591 749.3 815 2120 508 20-34.9 710 1464 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Gate Valves A
Flanged N
NAB (Ni-Alubronze) S
OS&Y, Bolted Bonnet, 300# I
Description
Ni-Alubronze gate valve, flanged ends (Flat Faced), Bolted Bonnet (BB), Outside Screwed
and Yoke (OS&Y), rising stem, non rising hand wheel, back seat, pressure class 300#.
Technical Features
Design Generally in accordance with API 600
Body, bonnet castings from a Marine Class Society Approved Foundry on request
2”-24” 300# 35.6 33.0 27.4 26.3 25.5 25.2 25.2 24.9 24.9 24.9 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1851-C958
Dimensions [mm]
DN ød øC øD H L n-øh øW Weight
10” DN250 254 387.4 445 985 457 16-28.6 450 294 Kg
12” DN300 305 450.8 520 1138 502 16-31.8 500 446 Kg
12” * DN300 * 305 450.8 520 1220 502 16-31.8 630 566 Kg
14” * DN350 * 337 514.4 585 1300 762 20-31.8 710 693 Kg
16” * DN400 * 387 571.5 650 1745 838 20-34.9 800 950 Kg
18” * DN450 * 432 628.6 710 2010 914 24-34.9 900 1150 Kg
20” * DN500 * 483 685.8 775 2330 991 24-34.9 900 1500 Kg
24” * DN600 * 584 812.8 915 2784 1143 24-41.2 1000 2250 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Threaded N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 150# I
Description
Ni-Alubronze globe valve, female threaded ends, Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, metal seated, plug type disc, back seat, pressure
class 150#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-3” 150# 20.68 18.62 16.55 14.48 12.41 10.34 10.00 Barg
* Above P-T table is extracted from MSS SP-80 material B62. MSS SP-80 only lists P-T ratings for class 150# threaded valves in material B62 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B62 (Tin) bronze
Materials
Parts Description Figure 1410-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN L H øW Weight [Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Threaded N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 300# I
Description
Ni-Alubronze globe valve, female threaded ends, Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, metal seated, plug type disc, back seat, pressure
class 300#.
Technical Features
Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-3” 300# 41.37 38.61 36.20 33.78 31.03 28.27 25.86 23.44 Barg
* Above P-T table is extracted from MSS SP-80 material B61. MSS SP-80 only lists P-T ratings for class 300# threaded valves in material B61 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B61 (Tin) bronze
Materials
Parts Description Figure 1411-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN L H øW Weight [Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Flanged N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 150# I
Description
Ni-Alubronze globe valve, flanged ends (Flat Faced), Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, metal seated, plug type disc, back seat, pressure
class 150#.
Technical Features
Design Generally in accordance with MSS SP-80 and BS 1873
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-1½” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1820 UB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze ASTM
Stem
B150-C63200
Dimensions [mm]
DN ød øD L H øW Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Flanged N
NAB (Ni-Alubronze) S
ISRS, Union Bonnet, 300# I
Description
Ni-Alubronze globe valve, flanged ends (Flat Faced), Union Bonnet (UB), Inside Screwed
Rising Stem (ISRS), rising hand wheel, metal seated, plug type disc, back seat, pressure
class 300#.
Technical Features
Design Generally in accordance with MSS SP-80 and BS 1873
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 1821 UB-C958 Flange Dimensions In accordance with ASME B16.5-Class 300# (Flat Faced)
½”-1½” 300# 35.6 33.0 27.4 26.3 25.5 25.2 25.2 24.9 24.9 24.9 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1821 UB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Union Nut
ASTM B148-C95800
Cast Ni-Alubronze
Wedge
ASTM B148-C95800
Alu-Bronze ASTM
Stem
B150-C63200
Dimensions [mm]
DN ød øD L H øW Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Flanged N
NAB (Ni-Alubronze) S
OS&Y, Bolted Bonnet, 150# I
Description
Ni-Alubronze globe valve, flanged ends (Flat Faced), Bolted Bonnet (BB), Outside Screwed
and Yoke (OS&Y), rising stem, rising hand wheel, back seat, pressure class 150#.
Technical Features
Design Generally in accordance with BS 1873
Body, bonnet castings from a Marine Class Society Approved Foundry on request
2”-16” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1820-C958
Cast Ni-Alubronze
Body, Bonnet, Disc
ASTM B148-C95800
Cast Ni-Alubronze
Body Seat Ring
ASTM B148-C95800
Alu-Bronze
Stem, Back Seat Ring
ASTM B150-C63200
Dimensions [mm]
DN ød øC øD H L n-øh øW Weight
10” DN250 254 362.0 405 792 622 12-25.4 450 239 Kg
12” DN300 305 431.8 485 865 698 12-25.4 500 332 Kg
10” * DN250 254 362.0 405 710 622 12-25.4 500 289 Kg
12” * DN300 * 305 431.8 485 850 698 12-25.4 630 365 Kg
14” * DN350 * 337 476.3 535 950 787 12-28.6 710 630 Kg
16” * DN400 * 387 539.8 595 1070 914 16-28.6 800 850 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Globe Valves A
Flanged N
NAB (Ni-Alubronze) S
OS&Y, Bolted Bonnet, 300# I
Description
Ni-Alubronze globe valve, flanged ends (Flat Faced), Bolted Bonnet (BB), Outside Screwed
and Yoke (OS&Y), rising stem, rising hand wheel, back seat, pressure class 300#.
Technical Features
Design Generally in accordance with BS 1873
Body, bonnet castings from a Marine Class Society Approved Foundry on request
2”-14” 300# 35.6 33.0 27.4 26.3 25.5 25.2 25.2 24.9 24.9 24.9 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1821-C958
Cast Ni-Alubronze
Body, Bonnet, Disc
ASTM B148-C95800
Cast Ni-Alubronze
Body Seat Ring
ASTM B148-C95800
Alu-Bronze
Stem, Back Seat Ring
ASTM B150-C63200
Stainless Steel
Bolting, Fasteners
A194-8M & A193-B8M
Cast Iron
Hand Wheel
ASTM A126
Dimensions [mm]
DN ød øC øD H L n-øh øW Weight
10” DN250 254 387.4 445 883 622 16-28.6 560 367 Kg
12” DN300 305 450.8 520 926 711 16-31.8 500 474 Kg
10” * DN250 254 387.4 445 1107 622 16-28.6 800 477 Kg
12” * DN300 * 305 450.8 520 1202 711 16-31.8 900 700 Kg
14” * DN350 * 337 514.4 585 1390 838 20-31.8 1000 880 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Swing A
Threaded N
NAB (Ni-Alubronze) S
Y-Type, Screwed Bonnet, 150# I
Description
Ni-Alubronze swing check, y-type, female threaded ends, Screwed Bonnet (SB),
metal seated, pressure class 150#.
Technical Features
Fig. 1430-C958 Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-3” 150# 20.68 18.62 16.55 14.48 12.41 10.34 10.00 Barg
* Above P-T table is extracted from MSS SP-80 material B62. MSS SP-80 only lists P-T ratings for class 150# threaded valves in material B62 bronz
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B62 (Tin) bronze
Materials
Parts Description Figure 1430-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Disc
ASTM B148-C95800
Dimensions [mm]
DN L H Weight
[Kg]
1/2” 62 43 0.27 Kg
3/4” 75 48 0.44 Kg
1” 90 62 0.72 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Swing A
Threaded N
NAB (Ni-Alubronze) S
Y-Type, Screwed Bonnet, 300# I
Description
Ni-Alubronze swing check, y-type, female threaded ends, Screwed Bonnet (SB),
metal seated, pressure class 300#.
Technical Features
Fig. 1431-C958 Design Generally in accordance with MSS SP-80
Body, bonnet castings from a Marine Class Society Approved Foundry on request
½”-2” 300# 41.37 38.61 36.20 33.78 31.03 28.27 25.86 23.44 Barg
* Above P-T table is extracted from MSS SP-80 material B61. MSS SP-80 only lists P-T ratings for class 300# threaded valves in material B61 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B61 (Tin) bronze
Materials
Parts Description Figure 1431-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Disc
ASTM B148-C95800
Dimensions [mm]
DN L H Weight
[Kg]
1/2” 67 44 0.31 Kg
3/4” 79 52 0.46 Kg
1” 95 62 0.75 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Swing A
Flanged N
NAB (Ni-Alubronze) S
Screwed Bonnet, 150# I
Description
Ni-Alubronze swing check valve, flanged ends (Flat Faced), Screwed Bonnet (SB),
metal seated, pressure class 150#.
½”-1½” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1810 SB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Bonnet
ASTM B148-C95800
Cast Ni-Alubronze
Disc
ASTM B148-C95800
Dimensions [mm]
DN ød øD L H Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Swing A
Flanged N
NAB (Ni-Alubronze) S
Bolted Cover, 150# I
Description
Ni-Alubronze swing check, flanged ends (Flat Faced), Bolted Cover (BC), metal seated,
pressure class 150#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
2”-24” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1810-C958
Dimensions [mm]
DN ød øC øD H L n-øh Weight
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Swing A
Flanged N
NAB (Ni-Alubronze) S
Bolted Cover, 300# I
Description
Ni-Alubronze swing check, flanged ends (Flat Faced), Bolted Cover (BC), metal seated,
pressure class 300#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
2”-24” 300# 35.6 33.0 27.4 26.3 25.5 25.2 25.2 24.9 24.9 24.9 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1811-C958
Dimensions [mm]
DN ød øC øD H L n-øh Weight
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Lift A
Flanged N
NAB (Ni-Alubronze) S
Union Bonnet, 150# I
Description
Ni-Alubronze lift check valve, flanged ends (Flat Faced), Union Bonnet (UB),
metal seated, pressure class 150#.
½”-1½” 150# 13.4 12.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 1450 UB-C958
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Cover
ASTM B148-C95800
Cast Ni-Alubronze
Disc
ASTM B148-C95800
Dimensions [mm]
DN ød øD L H Weight
[Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Duo A
Wafer N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze duo-check valve, wafer type, soft NBR seated, spring loaded discs,
pressure class 150#.
Technical Features
Design Generally in accordance with API 594
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Flange Dimensions Mounting between flanges in accord. with ASME B16.5-Class 150# (Flat Faced)
Temperature Range -29°C to +260°C (NBR seated valves are limited to max. 80°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- Retainerless design (Suffix R)
- Metal Seated (Suffix MS)
- Other spring/seal/bearing materials
- In pressure class 300# (Suffix 300#)
- Suitable for mounting between other flanged connections DIN, JIS etc.
2”-24” 150# 13.4 12.5 10.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 2238-C958
Cast Ni-Alubronze
Body, Discs
ASTM B148-C95800
Cast Ni-Alubronze
Cover
ASTM B148-C95800
Stainless Steel
Hinge Pin, Stop Pin, Spring
ASTM A276-316
Brass
Bearings
ASTM B124-C37700
Dimensions [mm]
DN ød øD L
2” DN50 60 105 60
3” DN80 89 137 73
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Duo A
Lug N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze duo-check valve, Lug type, soft NBR seated, spring loaded discs, tapped bolt
holes, pressure class 150#.
Technical Features
Design Generally in accordance with API 594
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Temperature Range -29°C to +260°C (NBR seated valves are limited to max. 80°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- Metal Seated (Suffix MS)
- Retainerless design (Suffix R)
- Non threaded bolt holes (Suffix NTH)
- Other spring/seal/bearing materials
- In pressure class 300# (Suffix 300#)
- Suitable for mounting between other flanged connections DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
2”-24” 150# 13.4 12.5 10.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 2238 LUG-C958
Dimensions [mm]
DN øC ød øD n x øh L
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Check Valves, Duo A
Flanged N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze duo-check valve, flanged ends (Flat Faced), soft NBR seated, spring loaded
discs, tapped bolt holes, pressure class 150# and 300#.
Technical Features
Design Generally in accordance with API 594
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Flange Dimensions Mounting between flanges in accord. with ASME B16.5-Class 150# (Flat Faced)
Temperature Range -29°C to +260°C (NBR seated valves are limited to max. 80°C**)
Options - In other ASTM B148 material grades (Suffix C...) and other bronze materials
- With Monel Trim (Suffix MON)
- Metal Seated (Suffix MS)
- Retainerless design (Suffix R)
- Other spring/seal/bearing materials
- In pressure class 300# (Suffix 300#)
- With other flanged connections DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
2”-24” 150# 13.4 12.5 10.5 10.5 9.9 9.7 9.7 9.7 9.7 9.7 9.7 Barg
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
Materials
Parts Description Figure 2238 FL-C958
Dimensions [mm]
DN øC ød øD n x øh L
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Threaded N
NAB (Ni-Alubronze) S
FB & RB, Split Body, 300# I
Description
Ni-Alubronze ball valve, female threaded ends, 2 piece (split) body, floating ball, full and
reduced bore (RB), Screwed Cap, blow-out proof stem, PTFE seated, pressure class 300#
(Class 150# included).
Technical Features
Fig. 1608-C958 Design Generally in accordance with ISO 17292
Fig. 1608 RB-C958 Body, bonnet castings from a Marine Class Society Approved Foundry on request
Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
* Above P-T table is extracted from MSS SP-80 material B61. MSS SP-80 only lists P-T ratings for class 300# threaded valves in material B61 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B61 (Tin) bronze
Materials
Parts Description Figure 1608-C958, 1608 RB-C9588
Cast Ni-Alubronze
Body
ASTM B148-C95800
Cast Ni-Alubronze
Cap
ASTM B148-C95800
Cast Ni-Alubronze
Ball
ASTM B148-C95800
Alu-Bronze
Stem
ASTM B150-C63200
Stainless Steel
Hand Lever
ASTM A240-304
Dimensions [mm]
Figure 1608-C958 Figure 1608 RB-C9588
DN L H W Weight L H W Weight
[Kg] [Kg]
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Threaded N
NAB (Ni-Alubronze) S
FB, 3-Piece Body, 150# I
Description
Ni-Alubronze ball valve, female threaded ends, 3 piece body with full lug type center piece,
floating ball, full bore (FB), blow-out proof stem, anti-static device, Fire Safe design, PTFE
seated, pressure class 150#.
Technical Features
Design Generally in accordance with BS 5351
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 7480-C958 Testing In acc. with BS 5146 Part 1, API 598, Fire Safe tested and certified to API 6FA
Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
* Above P-T table is extracted from MSS SP-80 material B62. MSS SP-80 only lists P-T ratings for class 150# threaded valves in material B62 bronze
Please note that GVC uses Ni-Alubronze Grade C95800 which has better mechanical properties compared to B62 (Tin) bronze
Materials
Parts Description Figure 7480-C958
Dimensions [mm]
DN ød L L1 H W
(Appr.)
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Flanged N
NAB (Ni-Alubronze) S
Red. Bore, Split Body, 150# I
Description
Ni-Alubronze ball valve, flanged ends (Flat Faced), 2 piece body, (<DN250) floating ball,
(≥DN250) trunion mounted ball, reduced bore (RB), PTFE seated, anti-static device, blow-
out proof stem, gland packing, ISO 5211 mounting table, Fire Safe, pressure class 150#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313, ASME B16.24
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Testing In accordance with API 6D, API 598, Fire Safe tested and certified to API 607
Reduced Bore Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With other seat materials
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
> DN200 (Trunion mounted Ball)
Pressure and Temperature Range [Barg/°C]
Pressure / Temperature Rating to ASME B16.24* [Barg / °C]
Press
DN
Class -29/38 50 100 125 150 175** 200 225 250 260 °C
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
** PTFE seated valves are limited to maximum +175°C
Materials
Parts Description Figure 7235 RB-C958
Seat PTFE
Dimensions [mm]
DN ød øD øC n x øh L H W
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Flanged N
NAB (Ni-Alubronze) S
Red. Bore, Split Body, 300# I
Description
Ni-Alubronze ball valve, flanged ends (Flat Faced), 2 piece body, (<DN250) floating ball,
(≥DN250) trunion mounted ball, reduced bore (RB), PTFE seated, anti-static device, blow-
out proof stem, gland packing, ISO 5211 mounting table, Fire Safe, pressure class 300#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313, ASME B16.24
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 7236 RB-C958 Testing In accordance with API 6D, API 598, Fire Safe tested and certified to API 607
Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With other seat materials
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
> DN200 (Trunion mounted Ball)
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
** PTFE seated valves are limited to maximum +175°C
Materials
Parts Description Figure 7236 RB-C958
Seat PTFE
Dimensions [mm]
DN ød øD øC n x øh L H W
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Flanged N
NAB (Ni-Alubronze) S
Full Bore, Split Body, 150# I
Description
Ni-Alubronze ball valve, flanged ends (Flat Faced), 2 piece body, (<DN250) floating ball,
(≥DN250) trunion mounted ball, Full Bore (FB), PTFE seated, anti-static device, blow-out
proof stem, gland packing, ISO 5211 mounting table, Fire Safe, pressure class 150#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313, ASME B16.24
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Testing In accordance with API 6D, API 598, Fire Safe tested and certified to API 607
Full Bore Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With other seat materials
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
> DN200 (Trunion mounted Ball)
Pressure and Temperature Range [Barg/°C]
Pressure / Temperature Rating to ASME B16.24* [Barg / °C]
Press
DN
Class -29/38 50 100 125 150 175** 200 225 250 260 °C
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 150#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
** PTFE seated valves are limited to maximum +175°C
Materials
Parts Description Figure 7235-C958
Seat PTFE
Dimensions [mm]
DN ød øD øC n x øh L H W
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Ball Valves A
Flanged N
NAB (Ni-Alubronze) S
Full Bore, Split Body, 300# I
Description
Ni-Alubronze ball valve, flanged ends (Flat Faced), 2 piece body, (<DN250) floating ball,
(≥DN250) trunion mounted ball, Full Bore (FB), PTFE seated, anti-static device, blow-out
proof stem, gland packing, ISO 5211 mounting table, Fire Safe, pressure class 300#.
Technical Features
Design Generally in accordance with API 6D, ISO 14313, ASME B16.24
Body, bonnet castings from a Marine Class Society Approved Foundry on request
Fig. 7236-C958 Testing In accordance with API 6D, API 598, Fire Safe tested and certified to API 607
Temperature Range -29°C to +175°C (PTFE seated valves are limited to max. +175°C**)
Options - In other ASTM B148 material grades (Suffix C...) and in other bronze materials
- With Monel Trim (Suffix MON)
- With other flanged connections DIN, JIS etc.
- With other seat materials
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
> DN200 (Trunion mounted Ball)
* Above P-T table is extracted from ASME B16.24 material ASTM B148 Grade C95200, class 300#
Please note that GVC uses Ni-Alubronze B148 Grade C95800 which has better mechanical properties compared to ASTM B148 Grade C95200
** PTFE seated valves are limited to maximum +175°C
Materials
Parts Description Figure 7236-C958
Seat PTFE
Dimensions [mm]
DN ød øD øC n x øh L H W
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, Rubber Lined A
Wafer N
NAB (Ni-Alubronze) S
Replaceable Rubber Liner, 150# I
Description
Ni-Alubronze concentric rubber lined butterfly valve, wafer type, pinned disc, 1 piece shaft,
replaceable rubber liner, triple sealing system, direct mount ISO 5211 mounting table,
pressure class 150#, bi-directional tight shut-off.
Technical Features
Design Generally in accordance with API 609 Category A
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Options - With body in other ASTM B148 material grades (Suffix C...)
- With liner Vulcanized onto the valve body (Suffix V)
- With other liner, disc and stem materials
- With manual operator (Hand Lever, Gearbox)
- With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
Materials
Parts Description Series CWR-C958
Dimensions [mm]
DN øC n-h L H1 H2 H3 Stem ISO Appr.
SQ (◊) 5211 weight
≤ DN200 For larger sizes up to DN1200 see Series CSR-C958 (Semi Lug Type)
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, Rubber Lined A
Semi-Lug N
NAB (Ni-Alubronze) S
Replaceable Rubber Liner, 150# I
Description
Ni-Alubronze concentric rubber lined butterfly valve, semi lug type, pinned disc, 1 piece
shaft, replaceable rubber liner, triple sealing system, direct mount ISO 5211 mounting
table, pressure class 150#, bi-directional tight shut-off.
Technical Features
Design Generally in accordance with API 609 Category A
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Options - With body in other ASTM B148 material grades (Suffix C...)
- With liner Vulcanized onto the valve body (Suffix V)
- With other liner, disc and stem materials
- With manual operator (Hand Lever, Gearbox)
- With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
Materials
Parts Description Series CSR-C958
Dimensions [mm]
DN * øC n-h (Tap) L H1 H2 H3 Stem H3 ** Stem Key ** ISO Appr.
Stem SQ (◊) Stem ** Size 521 weight
(◊) (ø) Dia. (ø) 1
18” DN450 578.0 4-1 1/8” 114 347 390 60 ◊ 27 60 ø 40 12x8 F14 104 Kg
20” DN500 635.0 4-1 1/8” 127 383 420 80 ◊ 36 80 ø 45 14x9 F16 154 Kg
24” DN600 749.5 4-1 1/4” 154 453 495 80 ◊ 50 80 ø 65 20x12 F16 240 Kg
28” DN700 863.5 4-1 3/8” 165 515 555 80 ◊ 50 80 ø 65 20x12 F16 305 Kg
32” DN800 978.0 4-1 5/8” 160 592 640 -- -- 90 ø 65 20x12 F25 403 Kg
36” DN900 1086.0 4-1 5/8” 203 658 700 -- -- 130 ø 80 22x14 F25 607 Kg
40” DN1000 1200.0 4-1 5/8” 216 725 770 -- -- 150 ø 95 25x14 F30 829 Kg
44” DN1100 1314.5 4-1 5/8” 240 760 830 -- -- 150 ø 95 25x14 F30 1031 Kg
48” DN1200 1422.4 4-1 5/8” 254 840 890 -- -- 150 ø 95 25x14 F30 1212 Kg
* : DN550, DN650, DN750 and DN850 are available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, Rubber Lined A
Lug N
NAB (Ni-Alubronze) S
Replaceable Rubber Liner, 150# I
Description
Ni-Alubronze concentric rubber lined butterfly valve, lug type, pinned disc, 1 piece shaft,
replaceable rubber liner, triple sealing system, direct mount ISO 5211 mounting table,
pressure class 150#, bi-directional tight shut-off.
Technical Features
Design Generally in accordance with API 609 Category A
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Temperature Range NBR -10°C to +100°C, EPDM -15°C to +120°C, Viton- 15°C to +230°C
Options - With body in other ASTM B148 material grades (Suffix C...)
- With liner Vulcanized onto the valve body (Suffix V)
- With other liner, disc and stem materials
- With manual operator (Hand Lever, Gearbox)
- With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
Materials
Parts Description Series CLR-C958
Dimensions [mm]
DN * øC n-h L H1 H2 H3 Stem H3 ** Stem ** Key ** ISO Appr.
(Tap) Stem (◊) SQ (◊) Stem (ø) Dia. (ø) Size 5211 weight
16” DN400 539.5 16-1” 102 325 370 60 ◊ 27 60 ø 40 12x8 F14 130 Kg
18” DN450 578.0 16-1 1/8” 114 347 390 60 ◊ 27 60 ø 40 12x8 F14 154 Kg
20” DN500 635.0 20-1 1/8” 127 383 420 80 ◊ 36 80 ø 45 14x9 F16 270 Kg
24” DN600 749.5 20-1 1/4” 154 453 495 80 ◊ 50 80 ø 65 20x12 F16 314 Kg
28” DN700 863.5 28-1 3/8” 165 515 555 80 ◊ 50 80 ø 65 20x12 F16 389 Kg
32” DN800 978.0 28-1 5/8” 160 592 640 -- -- 90 ø 65 20x12 F25 597 Kg
36” DN900 1086.0 32-1 5/8” 203 658 700 -- -- 130 ø 80 22x14 F25 956 Kg
40” DN1000 1200.0 36-1 5/8” 216 725 770 -- -- 150 ø 95 25x14 F30 1209 Kg
44” DN1100 1314.5 40-1 5/8” 240 760 830 -- -- 150 ø 95 25x14 F30 1753 Kg
48” DN1200 1422.4 44-1 5/8” 254 840 890 -- -- 150 ø 95 25x14 F30 2053 Kg
* : DN550, DN650, DN750 and DN850 are available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, Rubber Lined A
Flanged N
NAB (Ni-Alubronze) S
Replaceable Rubber Liner, 150# I
Description
Ni-Alubronze concentric rubber lined butterfly valve, double flanged type, pinned disc,
1 piece shaft, replaceable rubber liner, triple sealing system, direct mount ISO 5211
mounting table, pressure class 150#, bi-directional tight shut-off.
Technical Features
Design Generally in accordance with API 609 Category A
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Face to Face In accordance with manufacturers standard, see below dimensions table
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Temperature Range NBR -10°C to +100°C, EPDM -15°C to +120°C, Viton- 15°C to +230°C
Options - With body in other ASTM B148 material grades (Suffix C...)
- With liner Vulcanized onto the valve body (Suffix V)
- With f to f dimensions to API609 Table 2 short pattern (Vulcanized liner only)
- With other liner, disc and stem materials
- With manual operator (Hand Lever, Gearbox)
- With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
Materials
Parts Description Series CFR-C958
Dimensions [mm]
DN * øC n-h n-h L H1 H2 H3 Stem H3 ** Stem** Key** ISO Appr.
(Tap) (ø) Stem (◊) SQ (◊) Stem (ø) Dia. (ø) Size 5211 weight
10” DN250 362.0 4-7/8” 8-22.2 110 215 270 50 ◊ 17 50 ø 25 8x7 F10 66 Kg
12” DN300 432.0 4-7/8” 8-22.2 110 251 310 50 ◊ 22 50 ø 32 10x8 F10 78 Kg
14” DN350 476.0 4-1” 8-25.4 120 270 335 50 ◊ 27 50 ø 32 10x8 F10 100 Kg
16” DN400 539.5 4-1” 12-25.4 130 325 370 60 ◊ 27 60 ø 40 12x8 F14 147 Kg
18” DN450 578.0 4-1 1/8” 12-28.6 150 347 390 60 ◊ 27 60 ø 40 12x8 F14 174 Kg
20” DN500 635.0 4-1 1/8” 16-28.6 160 383 420 80 ◊ 36 80 ø 45 14x9 F16 222 Kg
24” DN600 749.5 4-1 1/4” 16-31.8 170 453 495 80 ◊ 50 80 ø 65 20x12 F16 323 Kg
28” DN700 863.5 4-1 3/8” 24-34.9 180 515 555 80 ◊ 50 80 ø 65 20x12 F16 415 Kg
32” DN800 978.0 4-1 5/8” 24-41.3 200 592 640 -- -- 90 ø 65 20x12 F25 599 Kg
36” DN900 1086.0 4-1 5/8” 28-41.3 230 658 700 -- -- 130 ø 80 22x14 F25 854 Kg
40” DN1000 1200.0 4-1 5/8” 32-41.3 250 725 770 -- -- 150 ø 95 25x14 F30 1071 Kg
44” DN1100 1314.5 4-1 5/8” 36-41.3 280 760 830 -- -- 150 ø 95 25x14 F30 1240 Kg
48” DN1200 1422.4 4-1 5/8” 40-41.3 300 840 890 -- -- 150 ø 95 25x14 F30 1553 Kg
* : DN550, DN650, DN750, DN850 and DN1300~DN4000 are available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, High Performance A
Wafer N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze double eccentric High Performance butterfly valve, wafer type, pinned disc,
1 piece blow out proof shaft, Rubber / (R)PTFE / Fire Safe and metal seated, adjustable
gland packing, direct mount ISO 5211 mounting table, pressure class 150#, bi-directional
tight shut-off.
Seat Types - Series HWT-C958 : PTFE seated
- Series FHW-C958 : Fire Safe seated PTFE + Monel metal backup ring
- Series MHW-C958 : Monel metal seated [Not tight shut-off]
- Series HWR-C958 : Rubber seated NBR, EPDM or Viton
Technical Features
Design Generally in accordance with API 609 Category B
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Other Approvals CE-PED, GOST, UL and API 607 fire safe certified (With Fire Safe seat)
Face to Face In accordance with API 609 Table 2 - Lug- and Wafer-Type Class 150#
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Series Pressure Rating In accordance with ASME B16.34 Appendix B
HWT-C958 Temperature Range PTFE, RTFE and Fire-Safe seat : -29°C to + 204°C
FHW-C958 Metal Seated
Rubber Seated
: -29°C to + 260°C **
: Depending on material, please consult us **
MHW-C958 Options - In pressure class 300#
- With body in other ASTM B148 material grades (Suffix C...)
HWR-C958 - With other disc and stem materials
- With RTFE seat (instead of PTFE seat)
- With other material metal backup ring and metal seat (Monel, Hastelloy)
- With manual operator (Hand Lever, Gearbox)
- With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
2”-10” 150# PTFE 19.00 18.00 15.75 14.00 13.00 12.90 Barg
* Please note that connecting bronze flanges might be subject to the ratings of ASME B16.24
** P-T ratings for metal seated and rubber seated valves are available on request
Materials
Parts Description Series HWR/HWT/MHW/FHW-C958
Dimensions [mm]
DN øC n-h L H H1 H2 H4 Stem H3 * Stem * Key * ISO Appr.
Stem (◊) SQ (◊) Stem (ø) ød Size 5211 weight
2 1/2” DN65 139.5 2-19.1 46 355 133 177 33 ◊ 12 45 ø 16 5x5 F07 5.5 Kg
10” DN250 362.0 2-25.4 71 655 275 320 55 ◊ 22 60 ø 25 8x7 F10 40.0 Kg
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, High Performance A
Semi-Lug N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze double eccentric High Performance butterfly valve, semi lug type, pinned disc, 1 piece blow out proof shaft,
Rubber / (R)PTFE / Fire Safe and metal seated, adjustable gland packing, direct mount ISO 5211 mounting table, pressure
class 150#, bi-directional tight shut-off.
Seat Types - Series HST-C958 : PTFE seated
- Series FHS-C958 : Fire Safe seated PTFE + Monel metal backup ring
- Series MHS-C958 : Monel metal seated [Not tight shut-off]
- Series HSR-C958 : Rubber seated NBR, EPDM or Viton
Technical Features
Design Generally in accordance with API 609 Category B
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Other Approvals CE-PED, GOST, UL and API 607 fire safe certified (With Fire Safe seat)
Face to Face In accordance with API 609 Table 2 - Lug- and Wafer-Type Class 150#
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
FHS-C958 -
-
With manual operator (Hand Lever, Gearbox)
With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
MHS-C958
HSR-C958 Pressure and Temperature Range [Barg/°C]
Pressure/Temperature Rating to ASME B16.34 Appendix B *
Press [Barg/°C]
DN Seat
Class
-29/40 +50 +100 +150 +200 +204 °C
2”-60” 150# PTFE 19.00 18.00 15.75 14.00 13.00 12.90 Barg
* Please note that connecting bronze flanges might be subject to the ratings of ASME B16.24
** P-T ratings for metal seated and rubber seated valves are available on request
Materials
Parts Description Series HSR/HST/MHS/FHS-C958
Dimensions [mm]
DN * øC n-h L H H1 H2 H4 Stem H3 ** Stem ** Key ** ISO Appr.
Stem (◊) SQ (◊) Stem (ø) ød Size 5211 weight
2 1/2” DN65 139.5 4-3/4” 46 355 133 177 33 ◊ 12 45 ø 16 5x5 F07 6.5 Kg
14” DN350 476.0 4-1 1/8” 92 816 346 395 65 ◊ 27 75 ø 38 12x8 F14 93 Kg
16” DN400 539.5 4-1 1/8” 102 905 385 445 65 ◊ 27 75 ø 38 12x8 F14 121 Kg
18” DN450 578.0 4-1 1/4” 114 1000 410 490 90 ◊ 36 100 ø 50 14x9 F16 144 Kg
20” DN500 635.0 4-1 1/4” 127 1048 448 500 90 ◊ 36 100 ø 50 14x9 F16 160 Kg
24” DN600 749.3 4-1 3/8” 154 1180 515 565 90 ◊ 50 100 ø 65 20x12 F16 284 Kg
28” DN700 863.6 4-1 3/8” 165 1346 596 650 -- -- 100 ø 65 20x12 F25 388 Kg
32” DN800 977.9 4-1 5/8” 190 1515 645 720 -- -- 150 ø 80 22x14 F30 607 Kg
36” DN900 1085.8 4-1 5/8” 203 1665 710 805 -- -- 150 ø 85 22x14 F30 860 Kg
40” DN1000 1200.2 4-1 5/8” 216 1815 770 870 -- -- 175 ø 100 28x16 F35 1180 Kg
* : DN550, DN650, DN750 an larger sizes DN1100~DN1500 available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, High Performance A
Lug N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze double eccentric High Performance butterfly valve, lug type, pinned disc, 1 piece blow out proof shaft,
Rubber / (R)PTFE / Fire Safe and metal seated, adjustable gland packing, direct mount ISO 5211 mounting table, pressure
class 150#, bi-directional tight shut-off.
Seat Types - Series HLT-C958 : PTFE seated
- Series FHL-C958 : Fire Safe seated PTFE + Monel metal backup ring
- Series MHL-C958 : Monel metal seated [Not tight shut-off]
- Series HLR-C958 : Rubber seated NBR, EPDM or Viton
Technical Features
Design Generally in accordance with API 609 Category B
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Other Approvals CE-PED, GOST, UL and API 607 fire safe certified (With Fire Safe seat)
Face to Face In accordance with API 609 Table 2 - Lug- and Wafer-Type Class 150#
Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
Series Temperature Range PTFE, RTFE and Fire-Safe seat : -29°C to + 204°C
Metal Seated : -29°C to + 260°C **
HLT-C958 Rubber Seated : Depending on material, please consult us **
FHL-C958 Options -
-
In pressure class 300#
With body in other ASTM B148 material grades (Suffix C...)
- With other disc and stem materials
MHL-C958 - With RTFE seat (instead of PTFE seat)
- With other material metal backup ring and metal seat (Monel, Hastelloy)
HLR-C958 -
-
With manual operator (Hand Lever, Gearbox)
With Hydraulic, electric and pneumatic actuators and accessories
- Suitable for mounting between flanges to DIN, JIS etc.
- With Marine Class Inspection Certificate (EN10204-3.2) by ABS, BV, DNV, LRS
and other (Marine Class) Societies
2”-60” 150# PTFE 19.00 18.00 15.75 14.00 13.00 12.90 Barg
* Please note that connecting bronze flanges might be subject to the ratings of ASME B16.24
** P-T ratings for metal seated and rubber seated valves are available on request
Materials
Parts Description Series HLR/HLT/MHL/FHL-C958
Dimensions [mm]
DN * øC n-h L H H1 H2 H4 Stem H3 ** Stem ** Key ** ISO Appr.
(Tap) Stem (◊) SQ (◊) Stem (ø) ød Size 5211 weight
2 1/2” DN65 139.5 4-3/4” 46 355 133 177 33 ◊ 12 45 ø 16 5x5 F07 9.0 Kg
14” DN350 476.0 12-1 1/8” 92 816 346 395 65 ◊ 27 75 ø 38 12x8 F14 130 Kg
16” DN400 539.5 16-1 1/8” 102 905 385 445 65 ◊ 27 75 ø 38 12x8 F14 144 Kg
18” DN450 578.0 16-1 1/4” 114 1000 410 490 90 ◊ 36 100 ø 50 14x9 F16 191 Kg
20” DN500 635.0 20-1 1/4” 127 1048 448 500 90 ◊ 36 100 ø 50 14x9 F16 226 Kg
24” DN600 749.3 20-1 3/8” 154 1180 515 565 90 ◊ 50 100 ø 65 20x12 F16 339 Kg
28” DN700 863.6 28-1 3/8” 165 1346 596 650 -- -- 100 ø 65 20x12 F25 519 Kg
32” DN800 977.9 28-1 5/8” 190 1515 645 720 -- -- 150 ø 80 22x14 F30 783 Kg
36” DN900 1085.8 32-1 5/8” 203 1665 710 805 -- -- 150 ø 85 22x14 F30 1102 Kg
40” DN1000 1200.2 36-1 5/8” 216 1815 770 870 -- -- 175 ø 100 28x16 F35 1450 Kg
* : DN550, DN650, DN750 an larger sizes DN1100~DN1500 available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
Butterfly Valves, High Performance A
Flanged N
NAB (Ni-Alubronze) S
150# I
Description
Ni-Alubronze double eccentric High Performance butterfly valve, double flanged type, pinned disc, 1 piece blow out proof shaft,
Rubber / (R)PTFE / Fire Safe and metal seated, adjustable gland packing, direct mount ISO 5211 mounting table, pressure
class 150#, bi-directional tight shut-off.
Seat Types - Series HFT-C958 : PTFE seated
- Series FHF-C958 : Fire Safe seated PTFE + Monel metal backup ring
- Series MHF-C958 : Monel metal seated [Not tight shut-off]
- Series HFR-C958 : Rubber seated NBR, EPDM or Viton
Technical Features
Design Generally in accordance with API 609 Category B
Body castings from a Marine Class Society Approved Foundry on request
Type Approvals Type approvals from ABS, BV, CCS, DNV, GL, KR, LRS and RMRS
Other Approvals CE-PED, GOST, UL and API 607 fire safe certified (With Fire Safe seat)
Face to Face In accordance with API 609 Table 2 (C) Double Flanged (Short Pattern) - Class 150#
Series Flange Dimensions Suitable for mounting between flanges in accord. with ASME B16.5-Class 150#
2”-60” 150# PTFE 19.00 18.00 15.75 14.00 13.00 12.90 Barg
* Please note that connecting bronze flanges might be subject to the ratings of ASME B16.24
** P-T ratings for metal seated and rubber seated valves are available on request
Materials
Parts Description Series HLR/HLT/MHL/FHL-C958
Dimensions [mm]
DN * øC n-h L H H1 H2 H4 Stem H3 ** Stem ** Key ** ISO Appr.
(Tap) Stem (◊) SQ (◊) Stem (ø) ød Size 5211 weight
12” DN300 432.0 12-1” 81 718 308 350 55 ◊ 27 60 ø 32 10x8 F10 123 Kg
14” DN350 476.0 12-1 1/8” 92 816 346 395 65 ◊ 27 75 ø 38 12x8 F14 155 Kg
16” DN400 539.5 16-1 1/8” 102 905 385 445 65 ◊ 27 75 ø 38 12x8 F14 224 Kg
18” DN450 578.0 16-1 1/4” 114 1000 410 490 90 ◊ 36 100 ø 50 14x9 F16 255 Kg
20” DN500 635.0 20-1 1/4” 127 1048 448 500 90 ◊ 36 100 ø 50 14x9 F16 321 Kg
24” DN600 749.3 20-1 3/8” 154 1180 515 565 90 ◊ 50 100 ø 65 20x12 F16 475 Kg
28” DN700 863.6 28-1 3/8” 165 1346 596 650 -- -- 100 ø 65 20x12 F25 685 Kg
32” DN800 977.9 28-1 5/8” 190 1515 645 720 -- -- 150 ø 80 22x14 F30 1050 Kg
36” DN900 1085.8 32-1 5/8” 203 1665 710 805 -- -- 150 ø 85 22x14 F30 1350 Kg
40” DN1000 1200.2 36-1 5/8” 216 1815 770 870 -- -- 175 ø 100 28x16 F35 1720 Kg
* : DN550, DN650, DN750 an larger sizes DN1100~DN1500 available on request ** : Round stem with key also available
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.
A
Ni-Alubronze N
S
Valves I
T S !
IA L IS
E S PEC
VALV
Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.