Beruflich Dokumente
Kultur Dokumente
SUMMARY OF RESULTS:
SUMMARY OF RESULTS:
Note:
WRC Bulletin 537 provides equations for the dimensionless curves
found in bulletin 107. As noted in the foreword to bulletin 537,
"537 is equivalent to WRC 107". Where 107 is printed in the
results below, "537" can be interchanged with "107".
Stress Values at
( N/mm2)
Type of
Stress Load Au Al Bu Bl Cu Cl Du Dl
Circ. Memb. P -8.5 -8.5 -8.5 -8.5 -7.6 -7.6 -7.6 -7.6
Circ. Bend. P -27.4 27.4 -27.4 27.4 -37.1 37.1 -37.1 37.1
Circ. Memb. MC 0.0 0.0 0.0 0.0 -3.9 -3.9 3.9 3.9
Circ. Memb. MC 0.0 0.0 0.0 0.0 -80.9 80.9 80.9 -80.9
Circ. Memb. ML -1.4 -1.4 1.4 1.4 0.0 0.0 0.0 0.0
Circ. Bend. ML -3.9 3.9 3.9 -3.9 0.0 0.0 0.0 0.0
Tot. Circ. Str. -41.2 21.5 -30.7 16.3 -129.5 106.5 40.1 -47.3
Long. Memb. P -7.6 -7.6 -7.6 -7.6 -8.5 -8.5 -8.5 -8.5
Long. Bend. P -38.8 38.8 -38.8 38.8 -27.4 27.4 -27.4 27.4
Long. Memb. MC 0.0 0.0 0.0 0.0 -5.7 -5.7 5.7 5.7
Long. Bend. MC 0.0 0.0 0.0 0.0 -44.2 44.2 44.2 -44.2
Long. Memb. ML -0.4 -0.4 0.4 0.4 0.0 0.0 0.0 0.0
Long. Bend. ML -6.2 6.2 6.2 -6.2 0.0 0.0 0.0 0.0
Tot. Long. Str. -53.0 37.1 -39.7 25.4 -85.9 57.5 13.9 -19.6
Tot. Shear 10.1 10.1 -10.1 -10.1 -1.0 -1.0 1.0 1.0
Str. Int. 58.8 42.1 46.3 32.0 129.5 106.5 40.2 47.4
PV Elite® 2018
Note - The ! mark next to the figure name denotes curve value exceeded.
Stress Values at
( N/mm2)
Type of
Stress Load Au Al Bu Bl Cu Cl Du Dl
Circ. Memb. P -18.1 -18.1 -18.1 -18.1 -12.0 -12.0 -12.0 -12.0
Circ. Bend. P -29.0 29.0 -29.0 29.0 -55.2 55.2 -55.2 55.2
Circ. Memb. MC 0.0 0.0 0.0 0.0 -8.8 -8.8 8.8 8.8
Circ. Memb. MC 0.0 0.0 0.0 0.0 -100.2 100.2 100.2 -100.2
Circ. Memb. ML -2.3 -2.3 2.3 2.3 0.0 0.0 0.0 0.0
Circ. Bend. ML -3.5 3.5 3.5 -3.5 0.0 0.0 0.0 0.0
Tot. Circ. Str. -52.8 12.1 -41.3 9.7 -176.3 134.6 41.9 -48.2
Long. Memb. P -12.0 -12.0 -12.0 -12.0 -18.1 -18.1 -18.1 -18.1
Long. Bend. P -55.4 55.4 -55.4 55.4 -30.0 30.0 -30.0 30.0
Long. Memb. MC 0.0 0.0 0.0 0.0 -16.6 -16.6 16.6 16.6
Long. Bend. MC 0.0 0.0 0.0 0.0 -48.8 48.8 48.8 -48.8
Long. Memb. ML -0.9 -0.9 0.9 0.9 0.0 0.0 0.0 0.0
Long. Bend. ML -4.9 4.9 4.9 -4.9 0.0 0.0 0.0 0.0
Tot. Long. Str. -73.2 47.4 -61.7 39.4 -113.5 44.2 17.3 -20.3
Tot. Shear 10.0 10.0 -10.0 -10.0 -1.0 -1.0 1.0 1.0
PV Elite® 2018
Str. Int. 77.3 50.0 65.7 42.4 176.3 134.6 41.9 48.3
Circ. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Circ. Pl (SUS) -9.9 -9.9 -7.2 -7.2 -11.5 -11.5 -3.6 -3.6
Circ. Q (SUS) -31.4 31.4 -23.5 23.5 -118.0 118.0 43.7 -43.7
Long. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Long. Pl (SUS) -7.9 -7.9 -7.2 -7.2 -14.2 -14.2 -2.9 -2.9
Long. Q (SUS) -45.0 45.0 -32.5 32.5 -71.7 71.7 16.8 -16.8
Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Shear Pl (SUS) 10.1 10.1 -10.1 -10.1 -1.0 -1.0 1.0 1.0
Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm+Pl (SUS) 20.4 20.4 20.3 20.3 14.5 14.5 4.3 4.3
Pm+Pl+Q (Total) 58.8 42.1 46.3 32.0 129.5 106.5 40.2 47.4
Circ. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Circ. Pl (SUS) -20.3 -20.3 -15.8 -15.8 -20.9 -20.9 -3.2 -3.2
Circ. Q (SUS) -32.5 32.5 -25.5 25.5 -155.4 155.4 45.1 -45.1
Long. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Long. Pl (SUS) -12.9 -12.9 -11.1 -11.1 -34.6 -34.6 -1.5 -1.5
Long. Q (SUS) -60.3 60.3 -50.5 50.5 -78.8 78.8 18.8 -18.8
Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Shear Pl (SUS) 10.0 10.0 -10.0 -10.0 -1.0 -1.0 1.0 1.0
Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm+Pl (SUS) 27.3 27.3 23.7 23.7 34.7 34.7 3.6 3.6
PV Elite® 2018
Pm+Pl+Q (Total) 77.3 50.0 65.7 42.4 176.3 134.6 41.9 48.3
Note:
WRC Bulletin 537 provides equations for the dimensionless curves
found in bulletin 107. As noted in the foreword to bulletin 537,
"537 is equivalent to WRC 107". Where 107 is printed in the
results below, "537" can be interchanged with "107".
Stress Values at
( N/mm2)
Type of
Stress Load Au Al Bu Bl Cu Cl Du Dl
Circ. Memb. P -11.2 -11.2 -11.2 -11.2 -10.0 -10.0 -10.0 -10.0
Circ. Bend. P -36.2 36.2 -36.2 36.2 -48.9 48.9 -48.9 48.9
Circ. Memb. MC 0.0 0.0 0.0 0.0 -5.2 -5.2 5.2 5.2
Circ. Memb. MC 0.0 0.0 0.0 0.0 -106.5 106.5 106.5 -106.5
Circ. Memb. ML -1.8 -1.8 1.8 1.8 0.0 0.0 0.0 0.0
Circ. Bend. ML -5.2 5.2 5.2 -5.2 0.0 0.0 0.0 0.0
Tot. Circ. Str. -54.3 28.3 -40.5 21.5 -170.6 140.3 52.8 -62.3
Long. Memb. P -10.0 -10.0 -10.0 -10.0 -11.2 -11.2 -11.2 -11.2
Long. Bend. P -51.1 51.1 -51.1 51.1 -36.2 36.2 -36.2 36.2
Long. Memb. MC 0.0 0.0 0.0 0.0 -7.5 -7.5 7.5 7.5
Long. Bend. MC 0.0 0.0 0.0 0.0 -58.2 58.2 58.2 -58.2
Long. Memb. ML -0.5 -0.5 0.5 0.5 0.0 0.0 0.0 0.0
Long. Bend. ML -8.2 8.2 8.2 -8.2 0.0 0.0 0.0 0.0
Tot. Long. Str. -69.8 48.9 -52.4 33.4 -113.1 75.7 18.3 -25.9
Tot. Shear 13.4 13.4 -13.4 -13.4 -1.3 -1.3 1.3 1.3
Str. Int. 77.5 55.5 61.0 42.1 170.6 140.3 52.9 62.4
PV Elite® 2018
Note - The ! mark next to the figure name denotes curve value exceeded.
Stress Values at
( N/mm2)
Type of
Stress Load Au Al Bu Bl Cu Cl Du Dl
Circ. Memb. P -23.8 -23.8 -23.8 -23.8 -15.9 -15.9 -15.9 -15.9
Circ. Bend. P -38.2 38.2 -38.2 38.2 -72.7 72.7 -72.7 72.7
Circ. Memb. MC 0.0 0.0 0.0 0.0 -11.6 -11.6 11.6 11.6
Circ. Memb. MC 0.0 0.0 0.0 0.0 -132.0 132.0 132.0 -132.0
Circ. Memb. ML -3.0 -3.0 3.0 3.0 0.0 0.0 0.0 0.0
Circ. Bend. ML -4.6 4.6 4.6 -4.6 0.0 0.0 0.0 0.0
Tot. Circ. Str. -69.6 16.0 -54.4 12.8 -232.3 177.3 55.1 -63.5
Long. Memb. P -15.9 -15.9 -15.9 -15.9 -23.8 -23.8 -23.8 -23.8
Long. Bend. P -73.0 73.0 -73.0 73.0 -39.5 39.5 -39.5 39.5
Long. Memb. MC 0.0 0.0 0.0 0.0 -21.8 -21.8 21.8 21.8
Long. Bend. MC 0.0 0.0 0.0 0.0 -64.3 64.3 64.3 -64.3
Long. Memb. ML -1.2 -1.2 1.2 1.2 0.0 0.0 0.0 0.0
Long. Bend. ML -6.4 6.4 6.4 -6.4 0.0 0.0 0.0 0.0
Tot. Long. Str. -96.5 62.4 -81.3 51.9 -149.5 58.2 22.8 -26.7
Tot. Shear 13.1 13.1 -13.1 -13.1 -1.3 -1.3 1.3 1.3
PV Elite® 2018
Str. Int. 101.8 65.9 86.6 55.9 232.3 177.3 55.2 63.6
Circ. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Circ. Pl (SUS) -13.0 -13.0 -9.5 -9.5 -15.2 -15.2 -4.8 -4.8
Circ. Q (SUS) -41.3 41.3 -31.0 31.0 -155.4 155.4 57.6 -57.6
Long. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Long. Pl (SUS) -10.5 -10.5 -9.5 -9.5 -18.7 -18.7 -3.8 -3.8
Long. Q (SUS) -59.3 59.3 -42.9 42.9 -94.4 94.4 22.1 -22.1
Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Shear Pl (SUS) 13.4 13.4 -13.4 -13.4 -1.3 -1.3 1.3 1.3
Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm+Pl (SUS) 26.8 26.8 26.7 26.7 19.1 19.1 5.7 5.7
Pm+Pl+Q (Total) 77.5 55.5 61.0 42.1 170.6 140.3 52.9 62.4
Circ. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Circ. Pl (SUS) -26.8 -26.8 -20.8 -20.8 -27.5 -27.5 -4.2 -4.2
Circ. Q (SUS) -42.8 42.8 -33.6 33.6 -204.8 204.8 59.3 -59.3
Long. Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Long. Pl (SUS) -17.0 -17.0 -14.7 -14.7 -45.6 -45.6 -2.0 -2.0
Long. Q (SUS) -79.5 79.5 -66.6 66.6 -103.9 103.9 24.8 -24.8
Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Shear Pl (SUS) 13.1 13.1 -13.1 -13.1 -1.3 -1.3 1.3 1.3
Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pm+Pl (SUS) 35.9 35.9 31.2 31.2 45.7 45.7 4.8 4.8
PV Elite® 2018
Pm+Pl+Q (Total) 101.8 65.9 86.6 55.9 232.3 177.3 55.2 63.6