Beruflich Dokumente
Kultur Dokumente
LECTURE-1
amr.ahmed@eng.asu.edu.eg
ABOUT THE TUTOR
Need modifications
Need modifications
Static analysis
Normal mode
Frequency response
Transient response
Solids
SIMULATION
APPROACH
Analysis
results
PRODUCT
Fluids
Thermodynamics
Approved design
Aerodynamics
Fluid mechanics
Heat transfer
CAM/CNC
4 Dr.Amr Shaaban-Introductory session 10/9/2017
4 Dr.Amr Shaaban-Numerical Control Machines 10/9/2017
1-CAD file
4-CNC
NC – Punched Tape •The control is hard wired, and therefore any modification
needs many changes in the controller.
SINUMERIK 840D
SINUMERIK 802D
11 Dr.Amr Shaaban-Numerical Control Machines 10/9/2017
INTERPOLATION
•When point-to-point is used for a certain axis, the cutter or work table
moves in rapid positioning mode (maximum feed rate). Hence, no
machining can occur using P-type controlled axis.
•If the tool is at A (X5, Y5) , and the absolute coordinates (X20, Y30) are
input, the movement will take place simultaneously at an angle of 45
degrees on both the X and Y axes until the tool reaches B (X20, Y20),
and then will continue on the Y axis only until the tool is at C (X20,Y30).
12 Dr.Amr Shaaban-Numerical Control Machines 10/9/2017
INTERPOLATION
2.5-axis
3-axis
Punching CNC machines
Drilling CNC machines VMC
15 Dr.Amr Shaaban-Numerical Control Machines 10/9/2017
CNC TYPES
5-Axis Milling Machine
•Negative Z is the direction in which the cutter approaches the work piece.
A C
G90
Example
G91
TURNED PARTS
N5 G90 G20
N10 T0101
N15 M03
N20 G00 X2 Z0.1 M08
N35 G71 P40 Q55 U0.05 W0.05
D625 F0.012
N40 G01 X0 Z0
N45 G03 X0.5 Z-0.25 I0 K-0.25
N50 G01 X1.75 Z-1.0
N55 X2.1
N50 T0100 G00 X4 Z3
N65 T0202
N70 G00 X2 Z0.1
N75 G70 P40 Q55 F0.006
N80 G00 X4 Z3 M09
N85 T0200 M05
N90 M30
MILLING PARTS
N5 G90 G80 G20 G99
N10 M06 T6
N15 M03 S1300
N20 G00 X1 Y1
N25 Z0.5
N30 G81 Z-0.25 R0.125 F5
N35 X2
N40 X3
N45 Y2
N50 X2
N55 X1
N60 G80 G00 Z1
N65 X0 Y0
N70 M05
N75 M30
CAM SOFTWARE
CNC-MDP471-Fall2017
Design Online Group
79TZ-7K53
amr.ahmed@eng.asu.edu.eg
28 Dr.Amr Shaaban-Numerical Control Machines 10/9/2017