Beruflich Dokumente
Kultur Dokumente
Market launches
February 2019
Smart home –
made easy
domovea
High-performance in
functional buildings
h3+ circuit breaker
04
domovea
More striking, more straightforward,
more versatile:
The new domovea generation is set-
ting standards in the intelligent home –
with new user interface and enhanced
functions.
22
Find out more at SPD overvoltage
hager.de/neuheiten protection
Further information on all market High-speed Internet without interrup-
launches featured in this edition tion: The new SPK103 surge protection
of news can be found at hager.de device reliably protects DSL and
under News. VDSL broadband networks against
lightning strikes and overvoltages.
2
12 16 20
Flush-mounted MCCB h3+ Energy meters
distribution board 160 and 250 A
A flat design, a broad range of applica- Greater power, greater protection: The Measure, convert and transmit energy
tions: With an installation height of new h3+ circuit breakers impress with intelligently: Our new generation of
110 mm and numerous cabinet variants, a breaking capacity of up to 70 kA and energy meters features tailor-made
the new flush-mounted distribution four different trip units. solutions for every application.
board provides even more flexibility
in cavity wall mounting.
24 26 28
tehalit.BRS65 berker Q.7, berker S.1 IP44
new height illuminated
2 mm makes all the difference: Thanks Switch and light in one: The illuminated Ideal for the garden, garage or hobby
to the new height, you can now use the berker Q.7 adds new highlights to any room: With the splash-water-protected
same moulded cover parts for all BR65, room – with integrated LED modules IP44 variant, the popular berker S.1
BRA65 and BRS65 dado trunking. and high-quality frame materials. can now also be used outdoors.
3
domovea
Smart home
in a new
dimension
domovea
The smart home is developing at a rapid pace.
Despite the vast array of offers available, the
best solutions are no longer always easy to
find. Save your customers hours of searching
and reduce the programming effort required
on your part. Choose domovea from Hager.
Our new control and visualisation system is
breaking new ground in residential and func-
tional buildings. In the technical centre. And
on all mobile devices. domovea – the simple,
versatile and efficient smart home solution for
everyone.
4
New server: Four becomes one domovea basic
TJA670
In the intelligent home, less is more. With the new domovea,
we have therefore reduced the number of server modules to
a minimum, while enhancing the range of functions. The
new servers replace the former TJA450** server.
The new domovea basic TJA670 server now performs the
functions of the KNX easy TJA665 server and the TJA560
IoT Controller. This saves space in the technical centre and
time during planning, installation and configuration.
As of September 2019, the portfolio will be extended to in-
clude the domovea expert TJA470 server and the Hager
TJA510 Access Gate for door communication will also be in-
tegrated, which will enable the domovea functions to also
be used for functional building applications. We are there-
fore turning four modules into a single compact module,
opening up a world of new possibilities for your customers.
Access
Gate*
* domovea expert, including the Access Gate,
is set to be available as of September 2019.
5
domovea
domovea basic
Easy to install and configure
KNX ETS systems require complex
programming and new users have to
undergo intensive training. With
domovea you can take a shortcut:
We'll teach you everything you need
to know about configuring domovea
basic in a single day. As of September
2019, you can become a domovea
expert* in just a few days.
domovea expert*
6
domovea basic TJA670
IP cameras 2 50
Temperature control Control of target values in conjunction Zone control in conjunction with
with TYM646R or TXM646R TYM646T or TXM646T
(heating actuator with controller) (heating actuator without controller)
7
domovea
Intuitive control
With the new
dashboard
In the intelligent home, the eye also takes control.
The domovea user interface has therefore been
completely redesigned and adapted to the operat-
ing philosophy of mobile devices. The result:
An extremely attractive, intuitive and functional
smart home dashboard.
Touch-and-play
All functions are displayed on the dashboard in
the form of self-explanatory pictograms. The in-
dividual functions can be activated and precisely
controlled with the touch of a finger. And the best
thing of all? Your customers can choose what
appears on their profile on the dashboard and
define their own personal favourites, e.g. central
functions, weather data or domograms.
8
IF, THEN – via domogram … and much more
In addition to binary control Further smart functions
functions (on/off, open/ complete the system:
close, up/down), domo- Energy indicators give an
grams also enable simple insight into current
logic sequences. Domo- consumption. IP camera
grams are simple IF, THEN images can be opened one
functions. In addition to the by one and IoT devices
more complex sequences controlled individually. Your
that you as an electrician customer can also respond
configure, your customer to push notifications. All
can also create their own IF, this and much more is
THEN functions and store possible with the new
them as individual scenes. domovea generation.
9
domovea
Smart configuration
More straightforward than ever
With the new domovea generation, we are making
configuration as simple as operation – and turning
you into experts in intelligent building control.
01
Install and connect the server
The domovea basic server (TJA670)
only takes up six horizontal pitches
in the technical centre. It is simply
snapped onto the DIN rail, connected
to the KNX terminal and then
connected on the mains side of the
home router. Done!
02
Open Hager Pilot and
start the configuration
The Hager Pilot configuration app
guides you through all programming
steps. Simply enter the IP address in
the browser of your PC or download
the app for mobile devices from
Google Play (for Android) or the App
Store (for iOS).
10
03
Conclude and transfer
the configuration
Register the finished product in your
myHager customer account. Then
transfer the configuration to your cus-
tomer via e-mail. You can use Hager
Pilot to create and save a complete
backup. If desired, your customer can
also assign you administrator rights to
enable you to make adjustments to
the system via remote access.
04
Activate the application
Your customers must also register on
myHager. The new domovea app is
activated following a password-pro-
tected login. The user login is saved
so that the system always starts im-
mediately.
At a glance: hager.de/domovea
– One server for all functions:
Including KNX easy, IoT Controller,
Hager Access Gate (as of September
2019)
– Simple visualisation
– Simple operation
– Simple set-up
11
More versatility
The new flush-mounted
distribution board
Are you looking for a multi-functional distribution
cabinet for all applications? The new distribution
board for flush mounting or cavity wall mounting
impresses with its increased size, greater versatility
and extended interior. Ideal for all applications in
residential and functional buildings – from energy
distribution through to the use of multimedia.
The ultra-flat distribution board Custom orders and configuration Optimum protection
A flat design, a broad range of appli- As well as being able to order com- High-quality products need to be ade-
cations: With an installation height of plete cabinets, you can also build your quately protected. That's why we have
just 110 mm, the new distribution new distribution board to suit your optimised the packaging. To protect it
board is the ideal solution for increas- own personal requirements. This from impact, the distribution board is
ingly common cavity wall mounting. It means, for example, that you can or- supplied in a robust, hard shell. An all-
is also becoming necessary to house der your wall box, blind frame and round plaster guard and separate door
more and more modular and commu- door separately. Or you can order the packaging have also been integrated.
nication devices. The focus of our new wall box for the installation site first, This enables you to store the door
range of distribution boards is there- and the interior later, once plastering safely when carrying out plastering or
fore on expansion: With up to eight is complete. You can choose from var- painting, whether at the installation
rows and up to three panels. This pro- ious doors depending on the applica- site or in your workshop.
vides sufficient space for all applica- tion: Made from robust sheet steel,
tions and the cabinet still lies flush on with plastic insert for optimum WLAN
any cavity wall. reception or with slits for improved
ventilation in cases of significant heat
build-up in the distribution board.
12
FWUxxS* FWUxxA FWUxxK1 FWUxxN FWUxxD
Complete distribution Complete distribution Multimedia distribution Complete distribution Distribution board, empty
board board board board – Blind frame and door
– Blind frame and door – Blind frame and door – Blind frame and slotted – Blind frame and door – Prepared for univers FW
– 125 mm cover – 125 mm cover sheet steel door – 300 mm cover for upper support frame
– quickconnect terminals – Without terminals – 125 mm cover wiring space
– Perfect for residential – Commonplace in – Cable trunking on the side – Two top rows for series
buildings functional buildings – Vertical compartment on terminals
multimedia side * "xx" stands for the number
– quickconnect terminals of rows and panels.
Rows
8
3
7 2 Panels
1
3
3 – 8** rows
1 – 3 panels
36 – 252 PLE
Up to 125 A
Installation
depth of just
110 mm
** The 8-row distribution board is only
available in a 1-panel design
13
Flush-mounted distribution board
Proven advantages
in the new housing
The new flush-mounted distribution board with numerous
technical improvements has entered the race. Not only
have we minimised installation time, we have also opened
up a wider array of possible applications for you and your
customers.
01 04 07
Cable entry Wall clamps Multimedia equipment packages
The new distribution board provides Fold-out wall-mounting brackets Two further equipment packages are
up to 130% more space for the inser- simplify attachment in the recess or now available: UM00M3 with 10-way
tion of cables, lines and pipes. Cable cavity wall. This guarantees a strong patch panel and two openings for
entry flanges at the top and bottom hold, even in the case of heavy cabi- Berker Integro flow inserts plus
save you the laborious task of thread- nets. UM00M4 with 24-way patch panel and
ing in; simply cut out the pre-stamp- 3-way socket. The equipment
ing, insert the cables and secure them 05 packages contain two multimedia
in place with the flanges. Compartments device holders and three cable clamps
Vertical and horizontal compartments and can be covered at the top and
02 guarantee optimum contact protection bottom with contact protection.
Ventilation between the panels or univers FW
Openings can be cut out at the top modules. The vertical compartments 08
and bottom, for example in order to are already integrated into the multi- Multimedia panel
integrate cable inserts or a ventilation media distribution boards. The multimedia panel can be placed
kit (FD00P5) by way of improving heat beneath or next to the distribution
extraction in cases of heavy device 06 panel. In addition to the classic perfo-
utilisation in cavity wall applications. Cable management rated sheet, the multimedia panel is
Additional plastic openings at the Open side panels and retaining clips now available for the first time with ro-
sides and the rear improve the WLAN (M7240) ensure simple and clean ca- bust plastic support plates for im-
signal. ble routing. Clip-on trunking covers proved WLAN signal.
(FWU00Cx) provide maximum cable
03 protection and clean termination. 09
Cable strain relief Doors
All distribution boards feature cable The flush-mounted distribution board
strain relief at the top and bottom. The is supplied with sheet steel door as
cable ties self-align as they thread in. standard. For improved WLAN signal,
A further strain relief rail is available as however, we recommend using a
an accessory (FZ850F). plastic door, which is available either
closed (FZxxxNM) or slotted
(FZxxxNM2).
At a glance:
– Flush or cavity wall mounting
– Fitted or prepared for univers FW hager.de/feldverteiler
– Rated current ≤ 125 A
– Height: 450 – 1200 mm (internal dimensions)
– Width: 250 – 750 mm (internal dimensions)
– Protection class II, IP30 degree of protection,
impact resistance until IK09
14
01 02
03 04 05
06 07
09 08
15
h3+ circuit breakers
Strong power
in functional
buildings
The size of a building not only affects power consumption.
Large buildings also have higher requirements for protective
devices. The new h3+ circuit breakers are more than capable
of meeting these requirements – thanks to a breaking capac-
ity of up to 70 kA. The plus at the end of the name stands
for: A greater selection thanks to four trip units, greater intel-
ligence thanks to new communication channels and im-
proved functional continuity thanks to needs-based para-
metrisation. The new h3+ circuit breakers are available in two
sizes and a wide range of variants. With the corresponding
modules, they can be seamlessly integrated into the univers
N system from Hager. Switch on the future – by reliably
switching off short circuit currents and overloads.
H3+/P160 H3+/P250
114 variants 118 variants
16
Four trip units – numerous advantages
17
h3+ circuit breakers
Protect
Communicate
Configure
Uniform accessories –
easy to integrate
Whether you are using h3 or
h3+, our accessories fit in all
circuit breakers. Two auxiliary
contacts can be used per cir-
03
cuit breaker. A special auxiliary Auxiliary and signal contacts
contact (AX-AL) with a switch-
ing cycle counter and status in-
02 01
formation is available for the
Energy trip unit.
Multifunction measuring
04
device or status display
All measurements provided by
circuit breakers with the Energy
trip unit are visualised on the
switchgear door on the optional
installation display. Thanks to
the measurement accuracy
class 1, no additional multifunc-
tion measuring device is re-
HTD210H door installation display
quired. In addition, the status
can be called up and the trip
unit configured on the display.
06
05
HTG411H HTC310H/HTC320H
agardio.manager communication modules
Modbus-compatible
Two modules are available for communication via Mod-
bus RTU, allowing measurements and status information
to be called up remotely. In this way, the h3+ circuit
breaker with the Energy trip unit can also be used as a
multifunction measuring device and can provide meas-
urements via an energy monitoring system such as
agardio.manager.
18
01 Captive screw
02 Fold-up housing cover
03 Viewing window for auxiliary contact
04 Locking device in switch lever
05 Integrated contact for issuing
pre-switch-off warnings*
06 OLED display**
07 Configurable alarm contact**
Configuration tool
HTP610H for h3+ Energy
At a glance: hager.de/h3+
– More than 200 device variants
– Intelligent electronic tripping
*
For h3+ LSI and Energy only. – High breaking capacity up to 70 kA
**
For h3+ Energy only. – Smart configuration (h3+ Energy)
19
Intelligent metering,
billing, saving
Energy meters
Saving and billing energy requires the energy to be
made visible. This means measuring, converting and
transmitting. This requires energy meters that record
all current consumption precisely and are compatible
with all common communication interfaces. The new
generation of energy meters from Hager provide
tailor-made solutions for all applications. Powerful,
compact and easy to connect. For intelligent energy
monitoring in residential and functional buildings.
20
Complete range Numerous interfaces
Our comprehensive range of new energy meters The new energy meters communicate via all
provides end-to-end functionality. Plus a few common interfaces; depending on the design via
highlights that you only get from Hager, for pulse measurement, M-Bus (commonly in resi-
example direct measurement up to 125 A with- dential buildings) or Modbus (predominantly in
out a converter. Or the 3 x 80 A 1-phase meter- functional buildings). The Modbus devices are
ing in a compact device (not MID-compliant). equipped either with screw-fastening technology
When integrated into a monitoring system, you or with practical plug-and-play plug-in technol-
therefore only use one instead of three bus ogy. In the case of the latter, an RJ45 connector
addresses. The meters can be used as bidirec- with protection against reverse polarity guaran-
tional meters for consumed and supplied mains tees fault-free connection and, if necessary,
power. They also measure the active, reactive quick connection to our agardio.manager energy
and apparent power. All other meters (1-phase monitoring server – another important compo-
40 A/80 A and 3-phase) are MID-compliant and nent of energy management of the future.
suitable for billing purposes.
1-phase 3-phase
40 A 80 A 3 x 80 A* 80 A 125 A 1 + 5 A**
* Not MID-compliant.
** Indirect
(current transformer 1 + 5 A).
At a glance: hager.de/energiezaehler
– 4-quadrant energy meters
– Display of: Active power (kW), reactive
power (kvarh), apparent power (kVA),
voltage (V), current
– Only available from Hager:
- Direct measurement up to 125 A
(3-phase)
- Energy meters 3 x 80 A (1-phase)
– Interfaces: Pulse, M-Bus, Modbus
– MID-compliant (except 1-phase 3 x 80 A)
21
Internet
Banking
Smart TV
Shopping
Radio
IoT
Communication
22
SPK103 SPK103
SPK103
All-round lightning protection – devices for communication and data another important security gap. It can
with Hager cables in the technical centre. They be used in all telecommunications net-
Standards DIN VDE 0100-443 and are compatible with the most diverse works: Telephone, DSL (ADSL, ADSL
-534, which came into force in Octo- range of cable networks and connec- 2+, T-DSL, VDSL, VDSL2), ISDN and
ber 2016, regulate overvoltage protec- tions: From DSL, ADSL, ADSL2+ and VoIP (Voice over IP). The compact sur-
tion for various building types and net- ISDN to weather stations, SAT and BK face-mounted device is installed either
work configurations (TNC or TNS/TT systems right through to all types of in the multimedia panel in the technical
network). With 3-stage combination bus systems, e.g. Elcom two-lead, centre or directly on the wall next to
arresters from the SPA series from Modbus, Ethernet or VoIP. The only the telecommunications connection.
Hager, your customers are already on weak point: The new, increasingly com-
the safe side. Provided, that is, you mon VDSL high-speed data networks. Fast mounting, safe wiring
have observed the transition period, The new SPK103 surge protection de-
which ended on 14th December 2018. The solution: The SPK103 surge vice is mounted between the TAE box
protection device and the router and connected to the in-
Protecting sensitive data networks The SPK103 surge protection device put and output cables on both sides via
With the SPK series, Hager is also of- has been specially developed for two terminal strips. A third terminal in
fering a wide range of surge protection VDSL networks and therefore closes the centre guarantees reliable earthing.
23
tehalit.BRS65
new height
Uniform,
simple, flexible
With tehalit dado trunking, we are pursuing a clear
goal: Making things as easy as possible for you. As
such, we have updated our range and increased the
70 mm nominal height of the tehalit.BRS by 2 mm to
68 mm. This means you can now use the same
moulded cover parts for all BR65, BRA65 and
BRS65 dado trunking. The couplings have also
been optimised, which means that you can now
+2 mm
also install devices in the coupling area.
3 heights:
70, 85, 100 mm*
4 widths:
100, 130, 170, 210 mm
2 cover track widths:
80, 120 mm*
24
New: 70 mm height, made from sheet steel
The new trunking profiles are made from galva- or offices. Thanks to the new height, there are now
nised sheet steel. This is characterised by its me- fewer references, which makes planning, ordering
chanical strength and is also halogen-free. Ideal and warehouse logistics much simpler. Special
for public buildings with more stringent fire protec- colours and special designs can also be imple-
tion regulations, e.g. schools, nurseries, hospitals mented simply and efficiently with sheet steel.
4 colours available:
RAL 9016, Traffic white
RAL 9010, Pure white
RAL 7035, Light grey
GALV, galvanised
At a glance: hager.de/tehalit.BRS65
– New 70 mm nominal height:
66 to 68 mm
– Robust sheet steel
– Uniform moulded cover parts for all BR65,
BRA65 and BRS65
– Device installation in the coupling area possible
– Fewer references
– Simple planning, ordering and storage
25
berker Q.7,
illuminated
Switch
and light
in one
26
Redefine the term "light switch" for your customers: The
illuminated berker Q.7 not only turns on the light. It lights up
itself – making it a striking focal point that aids orientation
as well as adding to the room design. The integrated LED
module emits a particularly pleasant light and highlights the
high-quality frame materials of the berker Q.7 design line.
Corona or downlight
The new switch is available
in two variants: As a corona
with all-round illumination.
Or as a downlight with light
cone on the underside and
twilight sensor, which
means that the frame light
only switches on below a
fixed twilight value. The lu-
minosity can be adjusted
between 100% and 50% in The corona is used as: The downlight is used as: One-part frame available in:
both variants. A sliding – Orientation light near exits – Landing light – Plastic, polar white/
switch below the support – Accent light for – Discreet nightlight for the anthracite velvet
frame is used for this, which particularly important bathroom – Plastic, aluminium velvet
can be easily adjusted by operating areas – Discreet lighting in – Glass, polar white/black
the user after removing the – Anti-glare night light for entrance areas – Aluminium, anodised
frame. The LEDs have a hallways and children's and much more. – Stainless steel, brushed
service life of 30,000 hours. rooms – Slate, natural
They do not fail after this – Bathroom switch that – Concrete, textured
time, but light up with 50% signals "occupied"
of their original brightness. and much more.
At a glance: hager.de/berkerQ.7
– High-quality light design in – Colour temperature: Warm white
residential and functional buildings (3,000 kelvin)
– Illuminated one-part frame – Output:
– Corona or downlight with two Corona, 100% brightness: 1.38 W
brightness levels Corona, 50% brightness: 0.35 W
– LED service life: 30,000 hours Downlight, 100% brightness: 1.15 W
– Compatible with all rockers/centre Downlight, 50% brightness: 0.81 W
plates from berker Q.1, Q.3, Q.7
27
More protection
berker S.1 IP44
Flat, simple and robust – with these qualities, the classic
berker S.1 has made its way into countless homes and of-
fice buildings. With immediate effect, it can now also be
used with selected functions in areas that require protection
class IP44.
With the S.1 IP44, the installation is optimally protected
against splash water. As the solution is visually identical to
the S.1, you can continue to use the popular and timeless
S.1 switch range but now with a higher protection class.
At a glance:
– Splash-water-protected
– Degree of protection: IP44
– Surround: One-part to three-part
– Colours: White, polar white matt,
polar white glossy
– Special seal sets for selected
products
– Simplified selection thanks
to online order guide
hager.de/berkerS.1
28
Alphanumeric price list
Space to
Hager integrate your
pricelist details
Order number EAN number Product description Price in euros Price unit Price group Packing unit
Subject to technical modifications/Recommended retail price in euros plus VAT/Last changed on 1st February 2019 29
Alphanumeric price list
Space to
Hager integrate your
pricelist details
Order number EAN number Product description Price in euros Price unit Price group Packing unit
30 Subject to technical modifications/Recommended retail price in euros plus VAT/Last changed on 1st February 2019
Hager SE
Zum Gunterstal
66440 Blieskastel
Germany
Dear reader,
19EN0014ECM