Beruflich Dokumente
Kultur Dokumente
They are often located in hazardous or harsh environments where they need to contain
electrical sparks of flames, or repel outside contaminants such as dust, dirt and fluids. In
addition to this, their job is to stop cables becoming twisted or pulled to ensure a secure
connection and continual performance.
As different industries have their own specific requirements, it’s important to choose the
right cable gland to suit the application environment.
There’s a world of choices out there and unfortunately no one-size-fits-all option. But it
does mean that you can custom select a cable gland based on your parameters. And to
do that, you first need to consider a range of environmental and application factors.
It doesn’t matter whether you’re working in aerospace, industrial, marine, power and
utility, telecommunications or any other key industry. What’s important is identifying the
core application environment of your cable gland.
Are you using it indoors or outdoors? Will it be situated in a safe industrial zone or a
hazardous or explosive environment? What’s the temperature and is it constant? Is the
surrounding area damp or dusty? Are there any gases or corrosive materials nearby?
https://www.essentracomponents.com/en-gb/news/product-resources/how-to-choose-the-right-cable-
glands
Your answers will help determine the cable gland specs and whether it requires a
special protective plating or coating.
Different cables demand different kinds of cable glands. The requirements for an
armoured cable are different to those of unarmoured cables.
Unarmoured cables can be more basic and may have no seal, a single outer seal or a
double outer seal.
Armoured cables have an extra layer of protection to prevent damage. This may be a
single wire armour, braided armour, pliable wire armour or double steel tape armour.
Cable diameter
Construction size
Cable material.
For armoured cables, you also need to consider:
The three main types of metal are brass, aluminium and stainless steel. There is also a
wide range of plastic and nylon cable glands to choose from.
Metal cable glands are used in a range of applications, including the chemical industry,
technology and areas with high demands on special mechanical and chemical stability.
The pros are durability over time, even in wet conditions, and its rigid stability.
Plastic cable glands have a wide cable range due to their claw and seal design, which
makes them extremely adaptable to a wide range of applications. The pros are
resistance to salt water, grease and weak acids, to name a few.
https://www.essentracomponents.com/en-gb/news/product-resources/how-to-choose-the-right-cable-
glands
Types of mounting
Depending on your application needs, there’s a wide choice of cable gland mounting
which includes adhesive or compound, flanged or bolted, threaded or nut, mount,
welded and cast.
Your application or environment may demand the cable gland to possess a specific
quality, above and beyond its basic function. That’s where you may consider one the
following special features:
Fire-stop cable gland which can withstand fire propagation through a barrier
Explosion-proof cable glands
EMI and RFI shielding and associated grounding features to minimise or eliminate
electromagnetic or radio frequency interference
Romex connections to specifically deal romex cables
Wire mesh for additional strain relief
Liquid tight cable glands to protect against penetrating oils and waters.
Ratings and standards
Because cable glands are designed with safety in mind, they come with a rating system
to ensure you know what you’re getting. The Ingress Protection Marking (IP) rates the
glands depending on their design and efficiency throughout different tasks. These rating
often go up to IP68 and IP69K.
Any cable glands you buy today will also be covered by the new European standard for
Cable Glands, EN50262.
It’s important to check that any devices placed in explosive atmospheres comply with
national or international codes of practice.
There are a few important considerations that fall outside of the categories above. So
before you choose a cable gland, also ask yourself:
Is the wire hole diameter large enough to house all the cables in the system?
Is the cable diameter sufficient?
Is the pressure rating high enough for your application needs?
Is the mounting hold diameter large enough for my cable gland?
Is the depth and size of the gland thread metric or PG?
Is there a requirement for stopper plugs to close off any unused cable entries?
https://www.essentracomponents.com/en-gb/news/product-resources/how-to-choose-the-right-cable-
glands