5: Actual-size PCB pattern of the power supply circuit
Fig. 3: Actual-size PCB pattern of the 4-channel multi-mode audio amplifier
Fig. 6: Component layout of the power supply PCB
CON11. Outputs for BTL mode are available
Switch on at CON9 and CON10. Switch S3 the circuit by and fuse F1 should be mounted on closing pow- the rear panel. er switch S3. It is recommended to use 2-way You can give panel-mount spring-loaded speaker audio inputs connectors for CON5 through from any CON10 and 3.5mm stereo female audio source panel-mount connectors for CON1 like an MP3 through CON4. Fig. 4: Component layout of the PCB in Fig. 3 player, lap- top or DVD An actual-size PCB pattern for the player to CON1 through CON4. Petre Tzv Petrov was a researcher and assistant professor in power supply is shown Fig. 5 and its If switches S1 and S2 are open, Technical University of Sofia component layout in Fig. 6. the circuit is in single-channel (Bulgaria) and expert-lecturer in OFPPT(Casablance), Kingdom of After assembling the circuit on mode. If closed, these are in BTL Morocco. Now he is working as the PCB connect 12V supply from mode. The 4-channel outputs are an electronics engineer in the private sector in Bulgaria CON13 to the amplifier circuit at available at CON5 through CON8.
www.efymag.com Electronics For You | March 2016 93