Beruflich Dokumente
Kultur Dokumente
1)By structure
a)Amplifier built in
b)Amplifier separated
c) Fiber type
d) Power supply built in
2) By sensing
a) Reflective Type
b) Thru-Beam Type
c) Retroreflective Type
3)By output circuit Analog Voltage
a) On /Off Output
b) Analog Output
4) By beam
a) Infrared Beam
b) Red Beam
c) Green Beam
d) Blue Beam
Reflective Model
Thu Beam
Model
Retroreflectiv
e
Model
Reflective Model
1) Both the light emitting and light receiving elements are contained in
a single housing.
2)The sensor receives the light reflected from the target.
Retroeflective Model
1) Both the light emitting and light receiving elements are contained in
same housing.
2) The light from the emitting element hits the reflector and returns to
the light receiving element. When a target is present, the light is
interrupted.
Thru Beam Model
1)The transmitter and receiver are separated.
2)When the target is between the transmitter and receiver, the light is
interrupted.
Features of PS
• Non-Contact Detection
-Since detection is possible without contact, there
will be no damage to targets.
-The sensor itself will not be damaged either, ensuring
long service life and maintenance-free operation
• Almost All Materials Detectable
-Since the sensor either detects targets based on the
reflectivity or the quantity of interrupted light,
almost all kinds of materials are detectable.
-This includes glass, metal, plastic, wood, and liquid.
• Long Detecting Distance
-Photoelectric Sensors are generally high power
and allow long-range detection.
Photo Sensor by IAEC
• Imported from: FOTEK Controls Co. Ltd.
• Types of Imported PS
Free Power PS
• A3R-30X
• A3R-1MX
• A3G-4MX
M R- 30 X B- PG
Series: Type: Sensing Output Connection
Emitter:
M- MS Status: Method:
series
R-Reflex Distance: X-Infrared
Blank-NO Non: Lead
G-Retroreflect 30-30cm LED
P- Plug Type Wire
T-Thru Beam 1M-1m R-Red LED
Series B: NC Type PG: M8
2M-2m Lead Wire
10M-10m
Feature
▪
High Compact Structure
▪
High compact structure IP-65
▪
Long Sensing Distance
▪
Operating Voltage – 10-30 VDC
▪
Current Consumption – 30 mA(max)
▪
Output Method – NPN & PNP (2 way)
▪
Output Status - NO.
▪
Output Current – 150mA(max)
▪
Protection Circuit – Short Circuit & Polarity Reversed
▪
Response Time – 2ms(max)
▪
Sensitivity Adjuster – 270(Degree) Trimmer
▪
Emitter – Infrared LED
Reflective Type
MR-10X MR-30X
Type – LED Wire Type Type – LED Wire Type
Sensing Distance – 10cm Sensing Distance – 30cm
Weight – App.78g Weight – App.78g
Reflective Type/Retroreflective Type
MR-60X MG-2MX