Beruflich Dokumente
Kultur Dokumente
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString, MacAddress
FROM SNMPv2-TC
ubntAFLTU, ubntAFLTUGroups
FROM UBNT-MIB;
afLTUMIB MODULE-IDENTITY
LAST-UPDATED "201710300000Z"
ORGANIZATION "Ubiquiti Networks, Inc."
CONTACT-INFO "support@ubnt.com"
DESCRIPTION "The AFLTU MIB module for Ubiquiti Networks, Inc. entities"
REVISION "201710300000Z"
DESCRIPTION "AFLTU.v0.1 revision"
::= { ubntAFLTU 1 }
afLTURole OBJECT-TYPE
SYNTAX INTEGER {
ap (0),
cpe (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Wireless Role (ap/cpe)"
::= { afLTUConfig 1 }
afLTUFrequency OBJECT-TYPE
SYNTAX Integer32
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The main frequency to use in MHz."
::= { afLTUConfig 2 }
afLTUAltFreqList OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The list of alternative frequencies in MHz. Multiple frequencies
should be separated with commas. For example: '5250,5670,5800'."
::= { afLTUConfig 3 }
afLTUBandwidth OBJECT-TYPE
SYNTAX INTEGER
{bw10M(10),bw20M(20),bw30M(30),bw40M(40),bw50M(50),bw60M(60),bw80M(80),bw100M(100)}
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Wireless channel bandwidth in MHz."
::= { afLTUConfig 4 }
afLTUSsid OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radio SSID"
::= { afLTUConfig 5 }
afLTUTxEIRP OBJECT-TYPE
SYNTAX Integer32 (-10..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Tx EIRP in dBm."
::= { afLTUConfig 6 }
afLTUAntennaGain OBJECT-TYPE
SYNTAX Integer32 (0..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Antenna gain in dBi."
::= { afLTUConfig 7 }
afLTUCableLoss OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Cable loss in dB."
::= { afLTUConfig 8 }
afLTUTxRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "x"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Tx modulation."
::= { afLTUConfig 9 }
afLTUTxRateAuto OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Automatic Tx moduleation selection. If this is enabled, afLTUTxRate
is the maximum modulation for the selection algorithm to select."
::= { afLTUConfig 10 }
afLTUDistanceScale OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Distance Scale, options are:
0 = 0km
1 = <1km
2 = <5km
3 = <10km
4 = <20km
5 = <40km"
::= { afLTUConfig 11 }
afLTUMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of this device"
::= { afLTUStatus 1 }
afLTUDevModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device model."
::= { afLTUStatus 2 }
afLTUDevName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device name."
::= { afLTUStatus 3 }
afLTUFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware version running."
::= { afLTUStatus 4 }
afLTUMemoryUsage OBJECT-TYPE
SYNTAX Integer32
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The percentage of total memory usage."
::= { afLTUStatus 5 }
afLTUCpuUsage OBJECT-TYPE
SYNTAX Integer32
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The percentage of total CPU usage."
::= { afLTUStatus 6 }
afLTUUptime OBJECT-TYPE
SYNTAX Counter64
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The uptime of the device in seconds."
::= { afLTUStatus 7 }
afLTUStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AfLTUStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Remote station table for status and statistics."
::= { afLTUMIB 4 }
afLTUStationEntry OBJECT-TYPE
SYNTAX AfLTUStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the afLTUStationTable"
INDEX { afLTUStaRemoteMac }
::= { afLTUStationTable 1 }
afLTUStaTxRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "x"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current select Tx modulation"
::= { afLTUStationEntry 1 }
afLTUStaRxRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "x"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current select Rx modulation"
::= { afLTUStationEntry 2 }
afLTUStaTxCapacity OBJECT-TYPE
SYNTAX Integer32
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit Capacity."
::= { afLTUStationEntry 3 }
afLTUStaRxCapacity OBJECT-TYPE
SYNTAX Integer32
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive Capacity."
::= { afLTUStationEntry 4 }
afLTUStaRxPower0 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured receive chain0 strength in dBm"
::= { afLTUStationEntry 5 }
afLTUStaRxPower1 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured receive chain1 strength in dBm"
::= { afLTUStationEntry 6 }
afLTUStaIdealRxPower0 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ideal chain0 receive power in dBm."
::= { afLTUStationEntry 7 }
afLTUStaIdealRxPower1 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ideal chain1 receive power in dBm."
::= { afLTUStationEntry 8 }
afLTUStaRxPowerLevel0 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measuared receive chain0 strength in % measured. 100% means that
the measured received power is equal to the ideal power. -1 means that we are not
able to get the information."
::= { afLTUStationEntry 9 }
afLTUStaRxPowerLevel1 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mresuared receive chain1 strength in %. 100% means that the
measured received power is equal to the ideal power. -1 means that we are not able
to get the information."
::= { afLTUStationEntry 10 }
afLTUStaRemoteMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of the remote station"
::= { afLTUStationEntry 11 }
afLTUStaRemoteDevModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device model of the remote station"
::= { afLTUStationEntry 12 }
afLTUStaRemoteDevName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device name of the remote station."
::= { afLTUStationEntry 13 }
afLTUStaRemoteFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware version of the remote station."
::= { afLTUStationEntry 14 }
afLTUStaRemoteTxEIRP OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station transmit signal strength in dBm."
::= { afLTUStationEntry 15 }
afLTUStaRemoteRxPower0 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured receive chain0 strength in dBm at remote"
::= { afLTUStationEntry 16 }
afLTUStaRemoteRxPower1 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured receive chain1 strength in dBm at remote"
::= { afLTUStationEntry 17 }
afLTUStaRemoteIdealRxPower0 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ideal chain0 receive power in dBm at remote."
::= { afLTUStationEntry 18 }
afLTUStaRemoteIdealRxPower1 OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ideal chain1 receive power in dBm at remote."
::= { afLTUStationEntry 19 }
afLTUStaRemoteRxPowerLevel0 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remoate measuared receive chain0 strength in % measured. 100%
means that the measured received power is equal to the ideal power. -1 means that
we are not able to get the information."
::= { afLTUStationEntry 20 }
afLTUStaRemoteRxPowerLevel1 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remoate measuared receive chain1 strength in % measured. 100%
means that the measured received power is equal to the ideal power. -1 means that
we are not able to get the information."
::= { afLTUStationEntry 21 }
afLTUStaRemoteLatency OBJECT-TYPE
SYNTAX Integer32
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station latency in milliseconds."
::= { afLTUStationEntry 22 }
afLTUStaRemoteDistance OBJECT-TYPE
SYNTAX Integer32
UNITS "km"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station distance in kilometers."
::= { afLTUStationEntry 23 }
afLTUStaRemoteConnectionTime OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station connection time of current session."
::= { afLTUStationEntry 24 }
afLTUStaRemoteLastIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station last known IP address."
::= { afLTUStationEntry 25 }
afLTUStaRemoteRegistrationAttempts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Station registration attempts."
::= { afLTUStationEntry 26 }
afLTUTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total tx bytes."
::= { afLTUStats 1 }
afLTUTxPps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "packet per second for tx."
::= { afLTUStats 2 }
afLTURxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total tx bytes."
::= { afLTUStats 3 }
afLTURxPps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "packet per second for rx."
::= { afLTUStats 4 }
END