Sie sind auf Seite 1von 2

DEMACO Showcases New Technology for Pasta Machines at IDMA Fair in

Istanbul

DEMACO showcases a broad variety of new technology for pasta machines and processing during
the IDMA International Fair in Istanbul. This new technology provides pasta makers with easier to
use machines and ability to make a wide variety of products to meet dietary and culinary trends.

Melbourne, FL, March 18, 2019 --(PR.com)-- DEMACO showcases new technology for pasta machines
during the IDMA International Fair. Over the past two years, DEMACO has developed a broad variety of
innovations both in equipment design and pasta processing methods. John Alberga, the Chief Engineer of
DEMACO said, "The new designs have focused on three areas: making machines that are more flexible,
easier to operate and make a higher quality product."

DEMACO redesigned the controls of the machine, using more automation, sensors and computerized
processing. These features enable the machine to become more flexible so they can easily handle a wider
range of products, to include ones with specialized ingredients such as gluten-free. Changes at the plant
level are easily made with prestored settings on the computer that are based on the product recipe.
Enhanced controls also make it easier for operator to run the machine and ensure it remains within the
operating parameters. The computerized control also keeps the process stable so that the final product
remains consistent, which is important to product quality.

Joe DeFrancisci from DEMACO said, "We are excited to showcase our new technology at IDMA. We
believe our technology is perfectly aligned with this region and will have a very positive reception." The
IDMA International Fair is at the Istanbul Expo Center in Yesilkoy, Turkey on March 20-23. The IDMA
International Fair is an international trade exhibition of milling and pasta technology held every two years
in Istanbul. DEMACO is headquartered in Melbourne, Florida, USA.

Photo compliments of Go Stand Design in Turkey.

Page 1/2
PR.com Press Release Distribution Terms of Use
Contact Information:
DEMACO
Leonard J. DeFrancisci
321.952.6600
Contact via Email
www.demaco.com

Online Version of Press Release:


You can read the online version of this press release at: https://www.pr.com/press-release/780102

News Image:

Page 2/2
PR.com Press Release Distribution Terms of Use

Das könnte Ihnen auch gefallen