Beruflich Dokumente
Kultur Dokumente
INSTALLATION INSTRUCTIONS
JANUARY 2014
Export Restrictions 3
WEBSITE REGISTRATION 4
DOWNLOADING FILES 7
STEPS FOR DOWNLOADING FILES 7
WINDOWS 7 SETUP 10
WINDOWS 8 - PREREQUISITE 16
WINDOWS 8 SETUP 16
INTRODUCTION
The following instructions are a reference for downloading and installing the Ro-Flo Performance software. This software is only for use by
authorized Ro-Flo Compressors customers and equipment end users.
REQUIREMENTS
The Ro-Flo Performance software is compatible with Windows 7 and Windows 8 operating systems. The Ro-Flo Performance software requires
various Microsoft software components including Microsoft .NET Framework 3.5 and Microsoft .NET Framework 4.0.
The Ro-Flo Performance software software needs approximately 500 MB of hard disk space to install on your computer.
If you need assistance during installation, please contact Travis Sixel at tsixel@roflocompressors.com or 920-574-2652.
Ro-Flo Compressors, LLC, affiliates, authorized distributors, or agents assume no liability for any consequences, damages, or loss of production
as a result of the use or misuse of the information or calculations contained in this program.
This computer program is protected by copyright law and international treaty provisions.
l You may not reverse engineer, decompile, or disassemble this program, except, and only to the extent that such activity is expressly per-
mitted by applicable law not withstanding this limitation.
l You may not publish the software for others to copy.
l You may not use the software in any way that is against the law.
l You may not rent, lease, or lend the software.
Export Restrictions
The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and
regulations that apply to the software. These laws include restrictions on destinations, end users, and end use.
WEBSITE REGISTRATION
The Ro-Flo Performance software can be downloaded from the Ro-Flo website.
5. Click Register
6. You will receive an email stating that your account has been created successfully and is awaiting authorization from Ro-Flo Compressors. If
you do not receive an email please try completing the registration process again.
7. After your account is approved, you will receive a second email stating that your account has been authorized for access to the Download area
of the Ro-Flo website. It may take up to 1 business day to receive your authorization.
8. Please continue to "Downloading Files" on page 7
DOWNLOADING FILES
After you have registered on the Ro-Flo website and received an email stating that your access has been approved please follow the steps below.
If you have not registered please follow the steps in "Website Registration" on page 4.
3. Enter the Username and Password created during the registration process, and click Login
5. Download the files for your region. If any warnings appear, select Save to your computer.
WINDOWS 7 - PREREQUISITE
To install the Ro-Flo Performance software you will need Microsoft .NET 3.5. This download can be obtained from http://www.microsoft.com/en-
us/download/details.aspx?id=21
Follow the instructions for installation of this Microsoft product. A computer restart will be required.
After restarting your computer, use Windows Update to make sure all necessary updates are applied to your computer. To run Windows update
please follow the instructions on Microsoft's website: http://windows.microsoft.com/en-us/windows7/install-windows-updates
WINDOWS 7 SETUP
To install the Ro-Flo Performance software on a Windows 7 operating system:
1. Go to where you saved the roflo.installer.exe file on your computer (recommended to be C:\Temp).
2. Right click the roflo.installer.exe and choose "Run as administrator"
3. If a User Account Control window appears, click 'Yes' to allow the software to make changes to your computer.
4. For new installations allow the software to install the Database and Software, by clicking 'Next'
7. Various screens will open and close as the installation process progresses
8. After the installation process has completed successfully you will see the following window, click 'OK'
9. A new window will open (possibly behind other open windows) for installation of Microsoft Visual C++ for 2005. Click 'Yes'
10. A window will open to install the Ro-Flo Performance software, click 'Next'
13. Click 'Close' after the Ro-Flo Performance software installation completes successfully.
14. You will see the following window after the software installation completes. Click 'OK'.
15. You now can open the Ro-Flo Performance software by using the icon on your desktop or the 'Start' menu item.
WINDOWS 8 - PREREQUISITE
To install the Ro-Flo Performance software on a computer using Windows 8, Microsoft .NET Framework 3.5 must be enabled.
1. On the Start Screen type "turn on windows features", click Settings, and then click Turn Windows features on or off
2. Under Turn Windows features on or off, check to make sure .NET Framework 3.5 (includes .NET 2.0 and 3.0) is enabled.
WINDOWS 8 SETUP
Follow the steps for setup as listed in "Windows 7 Setup" on page 10
To update the Ro-Flo Performance software please follow the steps outlined below:
5. After the update has completed you will see the following window.
6. To verify the installation had completed successfully you can open the Ro-Flo Performance software and click 'Help' --> 'About'