0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
21 Ansichten2 Seiten
The document summarizes that Severn Trent Water will replace ten old screens with five new fine screens from E&M. The fine screens have proven more efficient through testing, reducing the number of screens needed per channel and saving costs. E&M has 15 years of experience manufacturing screens for waste water treatment that meet stringent manufacturing and environmental standards.
The document summarizes that Severn Trent Water will replace ten old screens with five new fine screens from E&M. The fine screens have proven more efficient through testing, reducing the number of screens needed per channel and saving costs. E&M has 15 years of experience manufacturing screens for waste water treatment that meet stringent manufacturing and environmental standards.
The document summarizes that Severn Trent Water will replace ten old screens with five new fine screens from E&M. The fine screens have proven more efficient through testing, reducing the number of screens needed per channel and saving costs. E&M has 15 years of experience manufacturing screens for waste water treatment that meet stringent manufacturing and environmental standards.
Minworth STW in England (see photo besi- de), has decided to replace their remaining ten old screens of a competing manufactu- rer with five new fine screens. The efficien- cy of the fine screens has reduced the number of screens required and no longer inclined bar screen being lifted necessitates a fine and coarse screen in into the screening building; the each channel, giant savings for the client. entirely workshop assembled screen is over 15 metres long constructed of stainless steel.
Engineering & Manufacturing: E&M has been
manufacturing screens for the Waste Water Industry for more than 15 years. The first “Inclined Bar Screen” was installed over 15 years ago and is still in operation in Vienna today. The high quality standards seen in the E&M equipment are a direct result of the need to fulfill the stringent 15years development manufacturing and environmental standards.
for waste water treatment
E&M INCLINED BAR SCREEN Improved features to minimize running costs High efficiency – low maintenance Self-carrying design: Usually, the self carry- Maintenance: Rugged construction, Hydraulic capacity and low head-loss: Low overhead clearance: The E&M Screen’s ing frame is designed to allow screens to be fully assembled in the workshop and later stainless steel frame and screen- field, stainless steel roller bearing E&M has achieved a standard bar above-ground height is determined only by the spacing of 4 mm. Even with such fine spa- discharge level. Regardless of the depth of the simply lifted into the channel at site. Its own chains and self-lubricating bearings cing, head-loss is extremely low. At a channel, the total above ground-height of the weight is enough to keep the E&M Screen guarantee the client low maintenance hydraulic capacity test conducted in 1993 screen will not change. securely in position. costs. by the Viennese University of Technology, a Bypass channels can thus be eliminated 6 mm spaced E&M Screen was installed in a Cleaning capacity: The continuous traveling since the screen can be taken out by a Electro-mechanical overload device: channel with a flow of 1 m/sec. resulting in rake bars can be set to a cleaning interval of crane. In installations where the channel is An electro-mechanical overload only 30 mm of head-loss. In high capacity as short as 1.5 seconds. The overload device not very deep, the E&M Screen can be fixed device safely stops the motor in plants, head-loss has never been more than can be programmed to jump the drive into a on a pivot axle and can be swivelled out of any case of blockage and 75 mm. faster cleaning interval when the water level the channel. avoids damage of the differential gets too high. In tests by the City of screen. Vienna and in Birmingham, England, the E&M Screen even removed car tyres!