Beruflich Dokumente
Kultur Dokumente
INSTRUCTION MANUAL
KW-V640BT (Region 3 – DVD Region Code 3 Area) KW-M540BT (For Australia and New Zealand)
KW-V640BTM (Region 2 – DVD Region Code 2 Area) KW-M540BT (For Southeast Asia)
KW-M540BTM
This instruction manual is used to describe the models listed above. Model availability and features (functions)
may differ depending on the country and sales area. B5A-2153-00 (M/M2/X/A9)
i ENGLISH
ENGLISH ii
2 ENGLISH
ENGLISH 3
4 ENGLISH
Flick
Slide your finger to the left or right on
the screen to change the page.
Swipe
Slide your finger up or down on the
screen to scroll the screen.
ENGLISH 5
10:00
* Only for KW-V640BT/KW-V640BTM.
Power Off Tuner USB Disc
6 ENGLISH
10:00
Mon. Jan. 1
E.g. Common audio playback source screen for
KW-V640BT Region 3
− ATT: The sound is attenuated.
− LOUD: The loudness is active.
− IN: A disc is inserted. *2
Phone 1 Playback source or media type − MUSIC/VIDEO: Music/video file is played back.
2 Picture data/artwork (shown if the file contains • Short-cut buttons: Changes the source from
artwork except for disc playback) those you have located on the Home screen.
Source control screen 3 For video: Hides the operation buttons on the e M (For KW-V640BT/KW-V640BTM): Ejects the disc
screen while video is played (For KW-M540BT/KW-M540BTM): Displays the
You can perform the playback operation from the • Touch the screen to restore the operation phone control screen
source control screen during playback. buttons.
• The operation keys and information displayed vary *1 See “Common operation keys on source control screen” on
For audio: File format
depending on the selected source/disc type/file type page 8.
4 Repeat/random playback mode keys*1
being played. *2 Only for KW-V640BT/KW-V640BTM.
5 Information about connected device
• If the operation keys are not displayed on the screen, • For Bluetooth device: Signal strength and battery
touch the screen to show them. level (only when the information is acquired from
the device)
6 Track/file/song/video information
• Touching [] scrolls the text if not all of the text
is shown.
7 Clock display
ENGLISH 7
8 ENGLISH
ENGLISH 9
10 ENGLISH
ENGLISH 11
12 ENGLISH
ENGLISH 13
Bluetooth connection
Pair the iPod/iPhone with this unit via Bluetooth.
(Page 23)
14 ENGLISH
ENGLISH 15
16 ENGLISH
ENGLISH 17
18 ENGLISH
ENGLISH 19
*1 For KW-M540BT Australian/New Zealand models: Purchase *1 Not available for tracks in a playlist.
optional remote controller, RM-RK258. *2 Not available for tracks in the Radio.
*2 See the following “Operation keys on source control screen”. *3 Available only for premium account users.
20 ENGLISH
1 Display the pop-up short-cut menu. 2 Turn on the connected component and
start playing the source.
• For playback information, see “Source control
screen” on page 7.
ENGLISH 21
22 ENGLISH
ENGLISH 23
24 ENGLISH
Connecting/disconnecting a registered 3 Select the usage of the device (1), then Changing the PIN code
Bluetooth device touch [Close] (2).
1 Display the <Change PIN Code> screen.
1 Display the <Select Device> screen. On the Home screen, touch as follows:
On the Home screen, touch as follows:
ENGLISH 25
Changing the device name of the unit Bluetooth mobile phone During a call...
displayed on the paired device
When a call comes in...
1 Display the <Change Device Name> AM
screen.
On the Home screen, touch as follows: AM 10:00
10:00
Mon. Jan. 1
Mon. Jan. 1
Phone
26 ENGLISH
ENGLISH 27
Presetting phone numbers 3 Select a method to add a phone number Editing phonebook
You can preset up to eight phone numbers. to preset list and register the number to To transfer the phonebook
the preset list (1), then touch [Close] (2). If the connected Bluetooth mobile phone is
1 Display the <Edit Preset Dial> screen.
compatible with Phone Book Access Profile (PBAP),
On the Home screen, touch as follows:
you can transfer the phonebook of the mobile phone
to the unit.
28 ENGLISH
Bluetooth audio player Playback information and key operation Bluetooth mobile phone settings
• For playback information, see “Source control You can change various settings for using Bluetooth
screen”on page 7. mobile phones on the <TEL SETUP> screen.
Bluetooth • For key operations on the touch panel, see “Common
operation keys on source control screen” on 1 Display the <TEL SETUP> screen.
page 8. On the Home screen, touch as follows:
ENGLISH 29
30 ENGLISH
Setting the speakers and crossover 3 Select the speaker type (1), then adjust <Equalizer>
frequency the crossover frequency (2) of the The following adjustments are memorized for each
selected speaker. source until you adjust the sound again. If the source
1 Select a car type (1), select a speaker
X’over Front Rear Subwoofer
is a disc, the adjustments are stored for each of the
(2) (front speakers, rear speakers, or HPF FREQ
following categories.
subwoofer) to set, then location* and 100 Hz • DVD/VCD
speaker/tweeter size (3) of the selected
Slope
-6 dB/Oct
• CD
speaker. Gain • Audio/video files (Page 44)
0 dB
<LPF FREQ>
Adjusts the crossover frequency for the speaker 2 Select a preset sound mode.
(low pass filter). • Pop/Hip Hop/R&B/Jazz/Classical/Hard Rock/
• Repeat steps 2 and 3 to set all speakers. Flat (Initial)/iPod/User1/User2/User3/User4
• Adjustable items vary depending on the selected <Slope>
speaker type. Adjusts the crossover slope. Graphic Equalizer iPod ALL SRC
ENGLISH 31
then adjust the sound (3). You can adjust the sound effects according to your
listening position. You can also localize the sound Front L Front R
Graphic Equalizer USB ALL SRC 0 feet 0 feet
Rear L Rear R
0 feet 0 feet
0 ms 0 ms
Preset Select Bass EXT SW Level the listening position ([Front L], [Front R],
ON OFF • To determine the adjustment value, see
Initialise Memory 0
[Front All]*, or [All]) (2).
“Determining the value for <Position/DTA>
Position/DTA adjustment” on page 33.
Adjust the sound as follows: Listening Position Front Focus
• –50 to +10 (Initial: 0) * [Front All] is selectable only when <X’over Network> is set to Rear L Rear R
0 dB 0 dB
[2way]. Delay
Subwoofer
32 ENGLISH
Localizing the sound image—Front Focus [Sound Image LR (Front)] Determining the value for <Position/DTA>
Adjusts the sound image to be localized set on the adjustment
1 Touch [Front Focus] (1), select the front position. If you specify the distance from the center of the
listening position (2) to set as the front [Sound Image LR (Rear)] currently set listening position to every speaker, the
position, then touch [Adjust] (3). Adjusts the sound image to be localized set on the delay time will be automatically computed and set.
rear position. 1 Determine the center of the currently set
Position/DTA
listening position as the reference point.
Listening Position Front Focus [Size of the Virtual Sound Field]
2 Measure the distances from the reference point
Adjusts the virtual sound field to the desired field
Front L Front R to the speakers.
size.
Front All
Priority L
Front All
Priority R 3 Calculate the differences between the distance of
All All • If the sound image moves out of the front
Priority L Priority R the furthest speaker and other speakers.
position, adjust [Sound Image LR (Front)]/
Adjust
4 Set the DTA value calculated in step 3 for
[Sound Image LR (Rear)].
individual speakers.
[Subwoofer Delay] 5 Adjust gain for individual speakers.
• When you are sitting on the [Front All] (front Adjusts the delay time of the subwoofer sound.
seats) or [All] (front and rear seats) position, select E.g. When [Front All] is selected as the listening
left (“Priority L”) or right (“Priority R”) to specify 3 Touch [Level] (1), then adjust the output position
the position to localize the sound image. volume (2) for each speaker.
2 Touch [Delay] (1), then adjust the sound Front Focus Adjust Initialise
+90 cm
image (2) precisely. Tweeter
0 dB
Front L Front R
Front Focus Adjust Initialise
0 dB 0 dB
Subwoofer Delay
0 dB Level
80 cm
0.00ms 0.00ms
Delay
150 cm +70 cm
0.00ms 0.00ms
Level
+0 cm
ENGLISH 33
for each source. The volume level will automatically • OFF/ON (Initial)
increase or decrease when you change the source.
<Sound Response> Special Bluetooth Security Navigation
If you have increased the volume first, then reduced Virtually makes the sound more realistic using the
the volume using the Volume Offset, the sound Digital Signal Processor (DSP) system. Select the sound E.g. Setup screen for KW-V640BT Region 3
generated if you suddenly switch to another source level.
may be extremely loud. • OFF (Initial)/1/2/3
• –5 to +5 (Initial: 0)
<TV Tuner Control>
<Sound Lift> • ON: Enables control of TV operation on “AV-IN”.
To initialize the setting value: Touch [Initialise]. Moves the localization of the sound image to the • OFF (Initial): Select this to use “AV-IN” with
lower or higher point. Select the height. components other than TV Tuner.
<Sound Effect> • OFF (Initial)/Low/Middle/High
Adjust the sound effect.
* You cannot change the setting when “Tuner” is selected as the
<Bass Boost>
source.
Selects the bass boost level.
• OFF (Initial)/1/2/3
34 ENGLISH
Display settings <Background> 2 Select the folder, then the file for the
You can change the background design. background image in the selected folder.
Display the <Display> screen. To change the background design: User Background Select
On the Home screen, touch as follows:
<Dimmer>
• ON: Activates dimmer.
*
3 Rotate the image (1) if necessary, then
• OFF: Deactivates dimmer. confirm the selection (2).
• SYNC (Initial): Dims the screen and button * Selects a loaded favorite image in advance.
illumination when you turn on the headlights.
– The connection to the car light control switch is Storing your favorite image for the
required. (Page 43)
• NAV-SYNC*: Activates or deactivates dimmer
background
according to the day/night display setting of the You can use your favorite image stored on the
external navigation unit. connected USB device for the background.
• Connect the USB device on which the image is
stored beforehand.
<OSD Clock>
• Use a JPEG/PNG/BMP file with a resolution of 800 x
• ON (Initial): Displays the clock while a video source 480 pixels. A confirmation message appears. Touch [Enter]
is playing. to store the new image. (The existing image is
• OFF: Cancels. 1 Touch [User1 Select] or [User2 Select] to replaced with the new one.)
store the image for the <Background>
* Only for KW-V640BT Region 3 except for Indonesian models/ screen. <Viewing Angle>
KW-V640BTM Region 2/KW-M540BT Southeast Asian models/
KW-M540BTM. Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• 0 (Initial)/–1/–2/–3
ENGLISH 35
<Language Select>
Then, on the <SETUP> screen, touch [User Interface]. Select the text language used for on-screen
information. For details, see “Initial settings” on
<Steering Remote Controller> page 4.
Assign functions to the keys on the remote controller 3 Repeat steps 1 and 2 to register other
of the steering wheel. functions to other buttons. <Touch Panel Adjust>
• This function is available only when your car is 4 Touch [Learning completed] to finish Adjust the touch positions of the buttons on the
equipped with the electrical steering remote screen.
procedure.
controller.
A confirmation message appears. Touch [Yes]. Touch and hold the center of the marks at the lower
• You can only register/change the functions while
• The unit can register/change all of the buttons’ left (1), then the upper right (2) as instructed.
you are parked.
• If your steering remote controller is not compatible, functions at the same time. To do this, press all
learning may not be completed and an error buttons in turn and after pressing all of them, touch
[Learning completed] in step 2. However, new (Hold)
message may appear.
functions cannot be learned after this operation.
1 When the unit is ready for learning, press • When changing the functions already learned, touch
and hold a steering remote controller the assigned function you want to change in step 2
button for about 2 seconds to register/ and then touch to select the new function from the
change. function list. (Hold)
• Refer to the message displayed to confirm • Confirm the contents of the settable functions in the • To reset the touch position, touch [Reset].
whether the unit ready before proceeding. function list. You cannot edit the function list. • To cancel the current operation, touch [Cancel].
To initialize the setting: Touch [Learning
initialisation] in step 2. <Clock>
• A confirmation message appears. Touch [Yes]. Select the method to set the date and clock. For
– To cancel the initialization, touch [No]. details, see “Calendar/clock settings” on page 5.
36 ENGLISH
ENGLISH 37
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 29)
38 ENGLISH
CR2025 (+side)
RM-RK258
ENGLISH 39
40 ENGLISH
ENGLISH 41
42 ENGLISH
Wiring connection
Gray/Red
“
ST REMOTE
GND Connect to your vehicle’s steering
Bright green/Red remote harness.
STEERING Input 1
REMOTE Contact your JVC dealer for details.
Purple/Red
] *2 Input 2
Blue with white stripe (12 V 350 mA) ANT.CONT To the power control terminal when using the optional power amplifier (Or)
P.CONT
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Red (Ignition wire)
Yellow (Battery wire) Ignition key switch
Car fuse
Black (Ground wire)
Car battery
To the car chassis
ENGLISH 43
44 ENGLISH
ENGLISH 45
46 ENGLISH
ENGLISH 47
48 ENGLISH
ENGLISH 49
50 ENGLISH
ENGLISH 51
AM tuner section External Audio Max Input 2 V/25 kΩ LPF (Low Pass Filter) Frequency (Hz):
Level (mini jack) 30/40/50/60/70/80/90/100/
Frequency Range KW-V640BT/KW-M540BT: 120/150/180/220/250/
Video Output Level (RCA jack) 1 Vp-p/75 Ω
With channel interval set to Through
9 kHz (Asia*1/Europe*2) Analog RGB Input* 0.7 Vp-p/75 Ω
Slope (dB/Oct.):
531 kHz to 1 611 kHz * Only for KW-V640BT Region 3 except for Indonesian models/ –6/–12/–18/–24
153 kHz to 279 kHz*2 KW-V640BTM Region 2/KW-M540BT Southeast Asian models/ Gain (dB):
With channel interval set to KW-M540BTM. –8/–7/–6/–5/–4/–3/–2/–1/0
10 kHz (North America)
530 kHz to 17 00 kHz
Audio section
With channel interval set to General
9 kHz (Australia)*2 Maximum Power 50 W × 4
Operating Voltage 14.4 V
531 kHz to 1 701 kHz (9 kHz) (Front & Rear)
(10.5 V to 16 V allowable)
KW-V640BTM/KW-M540BTM: Full Bandwidth 22 W × 4 (at less than 1%
Maximum Current 10 A
531 kHz to 1 602 kHz (9 kHz) Power (Front & Rear) THD)
Consumption
Usable Sensitivity KW-V640BT Region 3 Preout Level 4 V/10 kΩ
Installation 178 mm × 100 mm × 162 mm
Souteast Asian models/ Preout Impedance ≤ 600 Ω Dimensions
KW-M540BT: 28.5 dBμ Speaker Impedance 4 Ω to 8 Ω (W × H × D)
KW-V640BT Region 3 Equalizer 13 Band Operational –10°C to +60°C
Indonesian models/ Temperature Range
Band Frequency (Hz):
KW-V640BTM/KW-M540BTM:
62.5/100/160/250/400/630/ Weight (Main Unit) KW-V640BT/KW-V640BTM:
28.5 μV
1k/1.6k/2.5k/4k/6.3k/10k/ 1.8 kg
*1 Only for KW-V640BT Region 3/KW-M540BT Southeast Asian 16k
KW-M540BT/KW-M540BTM:
models. Level:
1.4 kg
*2 Only for KW-M540BT Australian/New Zealand models. −09 to +09 (−9 dB to +9 dB)
HPF (High Pass Filter) Frequency (Hz):
Video section Through/30/40/50/60/70/ Design and specifications are subject to change
80/90/100/120/150/180/ without notice.
Color System of External NTSC/PAL
220/250
Video Input
Slope (dB/Oct.):
External Video Input Level 1 Vp-p/75 Ω –6/–12/–18/–24
(RCA jack)/(mini jack) Gain (dB):
–8/–7/–6/–5/–4/–3/–2/–1/0
52 ENGLISH
ENGLISH 53
<http://www.jvc.net/cs/car/>