Beruflich Dokumente
Kultur Dokumente
National foreword
This British Standard is the UK implementation of EN ISO 10628-2:2012.
Together with BS EN ISO 10628-1, it supersedes BS EN ISO 10628:2001,
which will be withdrawn on the publication of BS EN ISO 10628-1.
The UK participation in its preparation was entrusted to Technical Commit-
tee TDW/4, Technical Product Realization.
A list of organizations represented on this committee can be obtained
on request to its secretary.
This publication does not purport to include all the necessary provisions of
a contract. Users are responsible for its correct application.
© The British Standards Institution 2012.
Published by BSI Standards Limited 2012
ISBN 978 0 580 66008 5
ICS 01.080.30; 71.020; 75.020
This British Standard was published under the authority of the Stand-
ards Policy and Strategy Committee on 31 December 2012.
English Version
Schémas de procédé pour l'industrie chimique et Schemata für die chemische und petrochemische Industrie
pétrochimique - Partie 2: Symboles graphiques (ISO - Teil 2: Graphische Symbole (ISO 10628-2:2012)
10628-2:2012)
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10628-2:2012: E
worldwide for CEN national Members.
BS EN ISO 10628-2:2012
EN ISO 10628-2:2012 (E)
Contents Page
Foreword .......................................................................................................................................................3
2
BS EN ISO 10628-2:2012
EN ISO 10628-2:2012 (E)
Foreword
This document (EN ISO 10628-2:2012) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10628-2:2012 has been approved by CEN as a EN ISO 10628-2:2012 without any
modification.
3
BS EN ISO 10628-2:2012
Part 2:
Graphical symbols
1 Scope
This part of ISO 10628 defines graphical symbols for the preparation of diagrams for the chemical and
petrochemical industry. It is a collective application standard of the ISO 14617 series.
This part of ISO 10628 does not apply to graphical symbols for electrotechnical diagrams; for these, see IEC 60617.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 10209, Technical product documentation — Vocabulary — Terms relating to technical drawings, product
definition and related documentation
ISO 15519-1, Specification for diagrams for process industry — Part 1: General rules
ISO 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
IEC 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
Table 1 (continued)
5 Graphical symbols
Graphical symbols for diagrams used in chemical and petrochemical industry are presented in Table 2, which
is is divided into four columns, as follows:
1 Item no. Consecutive numbering within each subject group according to Table 1
3 Graphical symbol Graphical symbols shown with a 2,5 mm dotted grid behind. Preferred
locations of connections at graphical symbols are indicated by “—”. This
is not a part of the graphical symbol.
Rules for modification of proportions and orientation of graphical symbols are given in ISO 81714 and IEC 81714.
If a graphical symbol is not accessible in ISO 10628-2, then ISO 14617 should be consulted for the needed
graphical symbol.
If the needed graphical symbol is not available in ISO 14617, then the symbol shall be created by combining
ISO 14617 symbols of basic nature with symbols given supplementary information according to rules given in
ISO 14617, ISO 81714 and IEC 81714.
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
3 HEAT EXCHANGERS
3.1 X8079 Heat exchanger (general), condenser
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
5 COOLING TOWER
5.1 2521 Cooling tower (general)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
8 SEPARATORS
8.1 X8081 Separator, sifter (general)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
10 DRIER
10.1 C0046 Drier (general)
Table 2 (continued)
Table 2 (continued)
11 CRUSHING/GRINDING MACHINES
11.1 X8084 Crushing/grinding machine (general)
Table 2 (continued)
Table 2 (continued)
12 MIXERS/KNEADERS
12.1 X2672 In-line rotary mixer
Table 2 (continued)
Table 2 (continued)
15 LIQUID PUMPS
15.1 2301 Pump, liquid type (general)
Table 2 (continued)
Table 2 (continued)
17 BLOWERS, FANS
17.1 X8164 Blower, fan (general)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
20 ENGINES
20.1 2571 Turbine (general)
Table 2 (continued)
21 VALVE
21.1 2101 Valve (general)
Table 2 (continued)
Table 2 (continued)
22 CHECK VALVE
22.1 X8077 Check valve (general)
Table 2 (continued)
24 FITTINGS
24.1 2034 Viewing glass
Table 2 (continued)
Table 2 (continued)
26 APPARATUS ELEMENTS
26.1 C2005 Support leg
Table 2 (continued)
27 INTERNALS
27.1 C2044 Tray (general)
28 AGITATORS, STIRRERS
28.1 2672 Agitator (general), stirrer
(general)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Annex A
(informative)
Index
A Closed type 23
Coarse and fine screens 20
AC 37 Coarse rake type 20
Agitator 8, 43, 44, 45 Coil shaped tubes 11
Air filter 19 Column 1, 8, 9, 10
Anchor type 44 Combustion chamber 14
Angle ball type 38 Compensator 40
Angle globe type 38 Compressor 2, 32, 33
Angle type 38 Condenser 10
Apparatus elements 2, 42 Cone type 45
Cone type crusher 28
B Cone type strainer 40
Conical bottom 4, 5
Baffle 43
Conical roof 3, 5
Bag 5, 16, 19
Connection nozzle 43
Bag filling machine 35
Container 3, 5
Ball type 38
Control type 39
Barrel 5
Conveying 2, 33
Basket reel type 21
Conveyor 33, 34
Belt drier 26
Cooling tower 2, 19, 20
Belt type 18, 19, 33, 34
Coupling 56
Biological type 18
Crane 45
Blind disc 40, 41
Cross-beam type 44
Blowers 2, 33
Crusher 27, 28
Boiler 13
Crushing 2, 27, 45
Bottom 3, 4, 5
Cyclone type 23
Box 35
Box truck 35 D
Breakthrough 42
Breather valve 40 DC 37
Bubble-cap 10, 43 Decanter 25
Bucket type 34 Detonation-proof 39, 40
Built-in-components 2, 45 Diaphragm type 31, 32
Bundle 13 Disc drier 26
Bunker 4 Disc type 17, 44, 45
Burner 13 Dished bottom 7
Butterfly type 38 Dished ends 3, 5, 6, 7, 8
Dished roof 3, 4
C Distribution facilities 2, 36
Dome 13, 14
Candle 16, 19
Double-pipe type 12
Car 35
Drier 1, 25, 26
Cartridge 16, 19
Drum 5, 17
Centrifugal type 31, 32
Dry cooling 15
Centrifuge 1, 24, 25
Drying chamber 25
Chain type 33
Drying oven 25
Check valve 2, 39
Dry forced draught 15
Chimney 14
Dry induced draught 15
Cistern 3
Dry natural draught 15
Clamped flange coupling 41
Dummy cover 42
Closed tank 4
E Gearwheels type 45
Generating media 13
Evaporator 12 Generator 37
Ejector pump 31 Global angle type 39
Ejector type 33 Global type 38, 39
Electric heater 6, 12 Gravity separator 21
Electric motor 8, 37 Gravity type 45
Electrical heating 6 Grinding machine 2, 27
Electromagnetic 22, 45
Electrostatic type 22, 45 H
Elevator 34
Engines 2, 36 Hammer type 27, 28, 45
Explosion-proof 39 Heat consumer 27
Extruder 30, 31 Heat exchanger 2, 10, 11, 12, 13
Heating/cooling coil 7, 8
F Heating/cooling jacket 6
Helical type 44
Fan 2, 12, 33 HEPA type 19
Feeder 2, 36 Horizontal type 30
Filter 1, 16, 17, 18 Hose 41
Filter insert 43
Filter press 18 I
Fine rake type 20
Finned tube 12 Impact separator 21
Fire-resistant 39, 40 Impact type 27, 28, 45
Firing system 13 Impeller type 44
Fittings 2, 40 Industrial truck 35
Fixed bed 9 Injector 40
Fixed bed sections 10 In-line rotary mixer 29
Fixed-tube plates 11 In-line static mixer 29
Fixed type 19 Insulated 42
Flame arrestor 39, 40 Interchangeable disc 41
Flanged connection 41 Intermediate spray nozzle 10
Flanged dummy cover 42 Internals 2, 43
Flate-blade paddle type 43 Ion exchanger type 18
Floating head type 11, 13
Flowmotion 42 J
Fluidized bed 9, 43
Jacketed pipeline 42
Fluidized bed drier 26
Jacketed vessel 8
Forklift truck 35
Jaw type 28, 45
Forklift 34
Jet pump 31
Funnel 41
Jet type 33, 46
Furnace 1, 13
K
G
Kneader 2, 29
Gas 5, 14, 19
Gas bed filter 19
Gas cylinder 5
Gas filter 1, 18, 19
Gas flare 14
Gat paddle type 44
Gate type 38
Gear 36
Gear type 31, 45
L Proportional feeder 36
Proportioners 2, 36
Legs 7 Protective palette covering 36
Lifting 2, 33 Pulverizer 28
Lift 34 Pump 31
Lighting 40 Pusher type 25
Liquid bed filter 17, 18
Liquid filter 1, 16, 17, 18 R
Liquid pumps 2, 31
Liquid rotary filter 17 Rakes 1, 20
Liquids 5, 13 Re-boiler 12
Liquid type 31, 45 Reciprocating piston type 31, 32
Loading arm 35 Recooling device 1, 13
Reducer 41
M Reversible 34
Roll type 18, 19
Manhole 43 Roller type 28, 29, 30, 45
Metering type 36 Roller vane type 32, 36
Mill 28, 29 Roller conveyor 26, 35
Mixer 2, 29 Rotary drum drier 27
Mixing nozzle 40 Rotary drier 27
Mixing path 29 Rotary table type 36
Moving shelf drier 26 Rotary type 32
M-shape 11 Rotating drum type 21
Rupture disc 39
N
S
Natural draught 15, 16
Needle type 38 Safety function 2, 39
Safety valve 39
O Scraper 17
Screening device 1, 20, 21
Open bulk storage 8
Screw type 24, 30, 31, 32, 33
Open disc 41
Scrubber venturi type 23
Open type 23
Scrubber wet type 22
Orifice plate 40
Secondary pipeline 42
P Self-operating release valve 41
Semi-tube 8
Packing 43 Separator 1, 21, 22, 23, 24
Palletizer 35 Separator disc type 24
Pelletizing disc 30 Settling chamber 21
Perforated shell 24 Shaping machine 2, 30
Permanent magnet separator 23 Shelf drier 25
Pipeline 42 Ship 35
Piping 2, 42 Sieve 1, 20, 43
Piston type 30, 31, 32 Sifter 21
Pit 8 Silencer 40
Plate type 11 Single flange 42
Precipitator 22 Siphon 42
Press 30 Skimmer type 25
Press filter 18 Slope 42
Progressive cavity type 31 Socket 43
Propeller type 44 Solid shell 24, 25
Solidifier 23
Solids 5 U
Spherical vessel 4, 7
Spiral type 12 U-shaped tubes 11, 13
Spray cooler 16
Spray drier 26 V
Spray nozzle 36
Spray scrubber 22 Vacuum pump 2, 32, 33
Spring loaded 39 Valve 2, 37, 38, 39
Stack 14 Valve trays 10
Staggered baffle 9 Valve type 43
Steam 1, 13, 41 Vent 41
Steam generators 1, 13 Vertical type 30
Steam trap 41 Vessel 1, 3, 4, 5, 6, 7, 8, 14
Stirrer 2, 43
Vibrating type 20, 34
Straight tubes 11
Strainer 20, 40
Vibration type 29, 46
Suction filter 17 Viewing glass 40
Support bracket 5, 42 Viewing glass with lighting 40
Support leg 5, 42
Support ring 5, 43 W
Support skirt 6, 42
Wagon 35
Surface indication 7
Waste water treatment plant 23
Swing check valve 39
Wet-dry natural draught 16
T Wet forced draught 15
Wet induced draught 16
Tank 1, 3, 4 Wet natural draught 15
Tank car 35 Wet type 45
Tank wagon 35
Thermal insulation 7, 42 Z
Thin-film evaporator 12
Z-form 34
Three-way ball type 38
Three-way globe type 38
Three-way type 38
Tower 14, 15, 16
Tracer 42
Transport equipment 2, 33
Tray 9, 10, 43
Tray column 9
Tube bundle 13
Tumbling drier 27
Turbine 36
Turbine type 45
Turbo drier 26
Turbo type 32
Bibliography
[1] IEC 62424, Representation of process control engineering — Requests in P&I diagrams and data
exchange between P&ID tools and PCE-CAE tools
About us Revisions
We bring together business, industry, government, consumers, innovators Our British Standards and other publications are updated by amendment or revision.
and others to shape their combined experience and expertise into standards We continually improve the quality of our products and services to benefit your
-based solutions. business. If you find an inaccuracy or ambiguity within a British Standard or other
The knowledge embodied in our standards has been carefully assembled in BSI publication please inform the Knowledge Centre.
a dependable format and refined through our open consultation process.
Organizations of all sizes and across all sectors choose standards to help Copyright
them achieve their goals. All the data, software and documentation set out in all British Standards and
other BSI publications are the property of and copyrighted by BSI, or some person
Information on standards or entity that owns copyright in the information used (such as the international
We can provide you with the knowledge that your organization needs standardization bodies) and has formally licensed such information to BSI for
to succeed. Find out more about British Standards by visiting our website at commercial publication and use. Except as permitted under the Copyright, Designs
bsigroup.com/standards or contacting our Customer Services team or and Patents Act 1988 no extract may be reproduced, stored in a retrieval system
Knowledge Centre. or transmitted in any form or by any means – electronic, photocopying, recording
or otherwise – without prior written permission from BSI. Details and advice can
Buying standards be obtained from the Copyright & Licensing Department.
You can buy and download PDF versions of BSI publications, including British
and adopted European and international standards, through our website at Useful Contacts:
bsigroup.com/shop, where hard copies can also be purchased. Customer Services
If you need international and foreign standards from other Standards Development Tel: +44 845 086 9001
Organizations, hard copies can be ordered from our Customer Services team. Email (orders): orders@bsigroup.com
Email (enquiries): cservices@bsigroup.com
Subscriptions
Subscriptions
Our range of subscription services are designed to make using standards
Tel: +44 845 086 9001
easier for you. For further information on our subscription products go to
Email: subscriptions@bsigroup.com
bsigroup.com/subscriptions.
With British Standards Online (BSOL) you’ll have instant access to over 55,000 Knowledge Centre
British and adopted European and international standards from your desktop. Tel: +44 20 8996 7004
It’s available 24/7 and is refreshed daily so you’ll always be up to date. Email: knowledgecentre@bsigroup.com
You can keep in touch with standards developments and receive substantial
Copyright & Licensing
discounts on the purchase price of standards, both in single copy and subscription
format, by becoming a BSI Subscribing Member. Tel: +44 20 8996 7070
Email: copyright@bsigroup.com
PLUS is an updating service exclusive to BSI Subscribing Members. You will
automatically receive the latest hard copy of your standards when they’re
revised or replaced.
To find out more about becoming a BSI Subscribing Member and the benefits
of membership, please visit bsigroup.com/shop.
With a Multi-User Network Licence (MUNL) you are able to host standards
publications on your intranet. Licences can cover as few or as many users as you
wish. With updates supplied as soon as they’re available, you can be sure your
documentation is current. For further information, email bsmusales@bsigroup.com.