Checklist for Painting

Client Inspection Report No

Consultant Date

Vendor
Package Civil finishes
Description of Work Application of 1st & 2nd coat paint
Wing Dwg.Ref.No Rev Inspection Request
Floor Inspected by By Time
Details :
Location
Sl. No Description YES NO NA Remarks

Checking for Application of first coat of paint

1 Method statement submitted
2 Has the colour/ shade & make/ brand been approved ?

Is the approved manufacturer's Technical specification available

3
for reference ?

Check whether the wall surface has been plastered. Application

4 of putty completed & primer coat applied. Skirting should have
also been completed .

Is there any damage to the putty applied surface and if yes, has
5
the same been repaired prior to paint application

Prior to application of 1st coat of paint, check the surface of

6
primer

7 Check the consistency of paint.

Check if necessary precautions such as proper covering of floor

8 surface and other finished work surfaces have been undertaken
to avoid the paint stains on other surfaces.

9 Check for surface finish and shade of first coat of paint.

Application of Second coat of paint

Check if all MEP fixture (including electrical fittings) installation
1
is completed
3 Check for the application of 2nd coat of paint
Prior to application of second coat, check the first coat of paint
5
with light for any undulations that are to be rectified.

6 Check the Uniformity of 2nd coat of paint

7 Check for curing if required.

Check that all edges and other surfaces are cleaned and also the
8
scaffolds are all removed.

Has the floor, doors, windows and other areas been cleaned
9
after application of paint

Observations if any :

Above observations have been attended & completed YES NO NA

Contractor Contractor CBRE

Contractor Civil CBRE Safety Client Representative
Quality Safety Representative

Signature

Name
Date

Time
Distribution Original : CBRE - QS cc : Vendor

CBRE South Asia Pvt. Ltd. Project Management, India 1 of 1