Beruflich Dokumente
Kultur Dokumente
What types of elements are created by meshing, Mention about three types..?
Tria, Tetra, Hexa, Quad.
How u will justify that element size and quality of mesh is proportional..?
Convergence test.
How much percentage of tria elements are allowed in structural or crash analysis…?
5%
What is the difference between coarse mesh and fine mesh how it will affect the
analysis result..?
In coarse mesh, mesh size is generally taken large so that results are obtained quickly
with less accuracy. In fine mesh, size of mesh is taken small to obtain maximum
accuracy but taking large calculation time.
What is node
Node is coordinate location in a space where degrees of freedom are defined.
Analysis System
What are the file extensions given to sketches, parts, assemblies, drawings?
A.Sketches – .sec, Parts- .prt, Assemblies- .asm, Drawings- .drw
What is the model tree?
A. The model tree is a graphical representation of the features and/or components in
the model.
List five uses of datum planes.
A. Five uses of datum plane are as follows – Sketching plane, reference plane,
dimension and alignment references, geometric tolerancing, creating cross sections.
List three uses of datum axes.
A. Three uses of datum axes are as follow – Dimension and alignment references,
centerlines on drawings, geometric tolerancing, coaxial hole.
List two uses of a datum coordinate system.
A.Datum coordinate system is used While exporting to iges and stl.
Name a feature that can both add and remove material.
A. Rounds and chamfers are the features which can both add or remove the material.
When do feature relation evaluate?
A. When the feature regenerates.