Sie sind auf Seite 1von 2

Single Phase and Three Phase Motor – Quiz

Name:
BSME IV – GN

I. Fill in the blanks.

1. Single phase induction motor is an AC motor were electrical energy is converted to mechanical
energy to perform some physical task. This induction motor requires only one power phase for
their proper operation.
2. The single-phase motor starting torque is because of the pulsating single-phase magnetic
flux.
3. As its name indicates stator is a stationary part of induction motor.
4. The rotor is connected to the mechanical load through the shaft.
5. Shaded-pole motor is a small squirrel-cage motor in which the auxiliary winding is composed of a
copper ring or bar surrounding a portion of each pole.
6. Single-phase motors don’t create a magnetic field on their own, so they must be switch activated in
order to make the rotor move.
7. Two-value capacitor is a very quiet motor with high starting torque e.
8. Conversion of electrical power into mechanical power takes place in the rotating part of an electric
motor.
9. In A.C. motors, the rotor does not receive electric power by conduction but by induction in exactly
the same way as the secondary of a 2-winding transformer receives its power from the primary.
10. An induction motor can be treated as a rotating transformer i.e., one in which primary winding is
stationary but the secondary is free to rotate.

II. Write the letter of the correct answer on the space provided.

1. An electrical capacitor that alters the current to one or more windings of a single phase AC
induction motor to create a rotating magnetic field.
2. Has a start and run winding. Both windings are energized when the motor is started.
3. According to Faraday’s law, it is induced in any circuit is due to the rate of change of magnetic
flux linkage through the circuit.
4. Offers smooth acceleration and has a run winding and a start winding with a capacitor connected
in series.
5. The part of a motor consists of overlapping winding offset by an electrical angle of 120°.
6. The rotor windings are connected through slip rings to external resistances. Adjusting the
resistance allows control of the speed/torque characteristic of the motor.
7. They are commonly used in low power applications, in domestic and industrial use.
8. Has very simple and almost indestructible construction.
9. The current in the stator sets up a rotating magnetic field.
10. The stator carries a 3-phase winding (called stator winding) while the rotor carries a short-
circuited winding (called rotor winding).

a. Three Phase Motor g. permanent split capacitor motor


b. Single Phase Motor h. EMF
c. Capacitor-start/Induction-Run motor i. Rotor
d. Wound rotor j. Squirrel cage type rotor
e. Stator k. Current
f. Split-phase l. Magnetic field
Key
1. One power
2. Zero
3. Stator
4. Mechanical
5. Shaded pole motor
6. Magnetic fienld
7. Torque
8. Rotating
9. Induction
10. Induction motor

1. C
2. F
3. H
4. G
5. E
6. D
7. E
8. J
9. K
10. A

Das könnte Ihnen auch gefallen