Beruflich Dokumente
Kultur Dokumente
Product Identifier
Product name AMC CR-650
Synonyms CR-650
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses Drilling fluid additive.
NON-HAZARDOUS CHEMICAL. NON-DANGEROUS GOODS. According to the Model WHS Regulations and the ADG Code.
Min Max
Flammability 0
Toxicity 0
0 = Minimum
Body Contact 0 1 = Low
Reactivity 2 = Moderate
0
3 = High
Chronic 0 4 = Extreme
Label elements
Hazard statement(s)
Not Applicable
Substances
Mixtures
CAS No %[weight] Name
25987-30-8 NotSpec. acrylic acid/ acrylamide copolymer, sodium salt
Extinguishing media
There is no restriction on the type of extinguisher which may be used.
Control parameters
INGREDIENT DATA
Not Available
EMERGENCY LIMITS
Exposure controls
Appropriate engineering
Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard.
controls
Chemwatch: 4902-92 Page 4 of 6 Issue Date: 01/01/2013
Version No: 8.1.1.1 Print Date: 10/16/2014
AMC CR-650
Personal protection
Lower Explosive Limit (%) Not Applicable Volatile Component (%vol) Not Available
Chemical stability Product is considered stable and hazardous polymerisation will not occur.
Possibility of hazardous
See section 7
reactions
Hazardous decomposition
See section 5
products
Ingestion The material has NOT been classified by EC Directives or other classification systems as "harmful by ingestion".
The material is not thought to produce adverse health effects or skin irritation following contact (as classified by
Skin Contact
EC Directives using animal models).
Although the material is not thought to be an irritant (as classified by EC Directives), direct contact with the eye
Eye
may cause transient discomfort characterised by tearing or conjunctival redness (as with windburn).
Long-term exposure to the product is not thought to produce chronic effects adverse to health (as classified by
Chronic EC Directives using animal models); nevertheless exposure by all routes should be minimised as a matter of
course.
TOXICITY IRRITATION
AMC CR-650
Not Available Not Available
Not available.
Respiratory or Skin
STOT - Repeated Exposure
sensitisation
CMR STATUS
Toxicity
DO NOT discharge into sewer or waterways.
May be harmful to fauna if not disposed of according to Section 13 and legislative requirements. [AMC]
Bioaccumulative potential
Chemwatch: 4902-92 Page 6 of 6 Issue Date: 01/01/2013
Version No: 8.1.1.1 Print Date: 10/16/2014
AMC CR-650
Ingredient Bioaccumulation
Not Available No Data available for all ingredients
Mobility in soil
Ingredient Mobility
Not Available No Data available for all ingredients
Labels Required
Marine Pollutant: NO
Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Inland waterways transport (ADNR / River Rhine): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
UN number Not Available
Safety, health and environmental regulations / legislation specific for the substance or mixture
acrylic acid/ acrylamide
copolymer, sodium
"Australia Inventory of Chemical Substances (AICS)"
salt(25987-30-8) is found on the
following regulatory lists
Other information
Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the
Chemwatch Classification committee using available literature references.
A list of reference resources used to assist the committee may be found at:
www.chemwatch.net/references
The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards
are Risks in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current
or available engineering controls must be considered.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700.