Beruflich Dokumente
Kultur Dokumente
In this project we are collecting air from the air cylinder and store this energy to
the compressor tank as non-conventional method by simply driving the vehicle. Non-
conventional energy system is very essential at this time to our nation. Compressed air
production using vehicle suspensor needs no fuel input power to produce the output of
the air.
For this project the conversion of the force energy in to air. The control
mechanism carries the air cylinder (vehicle suspensor), quick exhaust valve, non-return
valve and spring arrangement. We have discussed the various applications and further
For this project the conversion of the force energy in to air. The control
mechanism carries the air cylinder, quick exhaust valve , non-return valve and cylinder
arrangement. We have discussed the various applications and further extension also. The
Indian road has high speed breaker so at that suspension can generate lot of air. It can be
incorporated at every vehicle where as number of cars are available. So this project is
implemented to all vehicles as well as for all cars, the air production is very high. The
suspension
3. Major parts used in Compressed air production using vehicle
Tubing
Dial gauge
Pneumatic cylinder
Return cylinder
bellow the L-shapes window. The pressurized cylinder is used to return the inclined
vehicle boy in same position by releasing the load. The cylinder shaft is connected to the
supporter by bush. The larger shaft is also coupled with the cylinder, so that it is moving
in same time. The return cylinder is coupled to the low location as in operation there will
be no jerk will be experienced by the human which is seated on the vehicle this
arrangement.
The weight is used to transfer the force to the cylinder piston by movement of
suspension. The air is pressed in forward direction for the compressed air production .The
internal vale gives the air in cylinder in this motion till this cycle the valve is open when
the suspension gets to normal then the non return valve locks the air in from coming in
when the piston is going for its resting position. The compressed air at the non return
valve is generated .from this movement .the return pressurized cylinder take the
Nowadays almost all the automobile vehicle is being atomized in order to product
the human being. The automobile vehicle is being atomized for the following reasons.
6. Conclusion
In concluding the words of our project, since the air production using foot
arrangement give its energy requirements from the Non-renewable source of energy.
There is no need of power from the mains and there is less pollution in this source of
It is able to extend this project by using changed arrangement and construct in the
footsteps/speed breaker so that increase the power production rate by fixing school and