Beruflich Dokumente
Kultur Dokumente
Stretch Wrapper
NEW FEATURES!
ELECTRONIC BOARD
& CONTROL PANEL
1
OneWrap is a semi-automatic machine for wrapping palletized loads
with stretch film. It can be equipped with mechanical/electromagnetic Section for mode of
brake or powered pre-stretch carriages. operation selection
NEW FEATURES:
2
A sleek and modern design of the panel with easily understandable icons.
OneWrap can be programmed with 10 different programs, allowing Parameter setting for
consistent wrapping cycle for a given product. The machine has 5 cycle characteristics
different modes of operation:
3
• Manual Mode.
Display area with
selection arrows
- Different speed of the carriage in ascent and descent phase.
- Top sheet application cycle with programmable amount of carriage
descent before pause (time delay).
4
- Overwrap amount programmable from the panel (time delay)
- Reinforcement loops independent from the turntable speed (real Section for
count of loops). start/stop/homing and
- Cycle can be stopped at any point and then continued, useful for power switch, ready
corner protection application. and emergency stop
- Large display with two digits visualize parameters to be adjusted,
speeds, number of loops, film tension, overwrap, times, top sheet
descent level as well as error code display.
Loading ramp
> FM > SM
> LP
Photocell for black film or colored products Electric panel heater for environment tempe-
ratures from -5 °C to +5 °C
www.zen-arte.it
> Machine dimensions > Machine shown with safety fences and anti-intrusion barriers
Dimensioni macchina
Machinemessungen
Dimensions machine
Dimensiones de la máquina
2422 / 2722 mm
mm
2235 mm
20
41
mm
330
00
0m
35
m
m
5m
96
/2
65
150
25
650
41
/ 18
/2
00 /
65
22
220
0m
m