Beruflich Dokumente
Kultur Dokumente
Thermal cutting
Classification of thermal cuts {
Geometrical product specification and quality tolerances
(ISO 9013 : 2002)
English version of DIN EN ISO 9013 EN ISO 9013
European Standard EN ISO 9013 : 2002 has the status of a DIN Standard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 121 to adopt, without
alteration, International Standard ISO 9013 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuss Schweißtechnik
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Amendments
This standard differs from the May 1995 edition in that it has been completely revised.
Previous editions
DIN EN ISO 9013: 1995-05; DIN 2310-1: 1965-02, 1975-02, 1987-11; DIN 2310-2: 1971-06, 1976-05,
1987-11; DIN 2310-3: 1975-02, 1987-11; DIN 2310-4: 1977-11, 1987-09; DIN 2310-5: 1980-09, 1990-12.
National Annex NA
Standard referred to
(and not included in Normative references, Bibliography and Annex ZA)
DIN EN 22553 Welded, brazed and soldered joints – Symbolic representation on drawings
(ISO 2553 : 1992)
Continued overleaf.
EN comprises 25 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN ISO 9013 : 2003-07
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 13 Sales No. 1113
has the exclusive right of sale for German Standards (DIN-Normen).
11.03
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
EN ISO 9013
September 2002
English version
Thermal cutting
Classification of thermal cuts
Geometrical product specification and quality tolerances
(ISO 9013 : 2002)
|
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 2002. CEN – All rights of exploitation in any form and by any means Ref. No. EN ISO 9013 : 2002 E
reserved worldwide for CEN national members.
Page 2
EN ISO 9013 : 2002
Foreword
International Standard
ISO 9013 : 2002 Thermal cutting – Classification of thermal cuts – Geometrical product specification and
quality tolerances,
which was prepared by ISO/TC 44 ‘Welding and allied processes’ of the International Organization for
Standardization, has been adopted by Technical Committee CEN/TC 121 ‘Welding’, the Secretariat of which is
held by DS, as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, and conflicting national standards withdrawn, by March 2003 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 9013 : 2002 was approved by CEN as a European Standard without
any modification.
NOTE: Normative references to international publications are listed in Annex ZA (normative).
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page
2
3
3
4
4
4
9
10
10
10
11
13
13
14
17
17
18
19
20
20
20
20
21
24
25
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7 EN ISO 9013 : 2002
Page 3
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 4
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7 EN ISO 9013 : 2002
Page 5
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 6
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7 EN ISO 9013 : 2002
Page 7
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 8
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7 EN ISO 9013 : 2002
Page 9
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 10
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 11
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 12
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 13
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 14
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 15
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 16
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 17
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 18
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 19
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 20
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 21
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 22
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 23
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 24
EN ISO 9013 : 2002
Technical Information Centre MAN
Vervielfältigung lt. DIN-Merkblatt 7
Page 25
EN ISO 9013 : 2002