Beruflich Dokumente
Kultur Dokumente
8-port sector Planar Array Antenna, 2496–2690 MHz, 90° HPBW, 1x RET
l Excellent solution for site sharing and maximizing capacity
l Employs state
state--of
of--the
the--art ultra wideband technology providing excellent RF performance in all bands
l MIMO ready
Electrical Specifications
Frequency Band, MHz 2496–2690
Gain, dBi 17.8
Beamwidth, Horizontal, degrees 96
Beamwidth, Vertical, degrees 4.7
Beam Tilt, degrees 0– 8
USLS, typical, dB 18
Coupling level, Amp, Antenna port
26
to Cal port, dB
Coupling level, max Amp ?,
±2
Antenna port to Cal port, dB
Coupler, max Amp ?, Antenna port
0.9
to Cal port, dB
Coupler, max Phase ?, Antenna
7
port to Cal port, degrees
CPR at 3 dB Horizontal Beamwidth,
14
dB
Isolation, dB 25
VSWR | Return Loss, dB 1.45 | 14.7
PIM, 3rd Order, 2 x 20 W, dBc -143
Input Power per Port, maximum,
250
watts
Polarization ±45°
Impedance 50 ohm
page 1 of 4
March 27, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 27, 2019
TTTT90AP-1XR
* CommScope
CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the
whitepaper Time to Raise the Bar on BSAs.
page 2 of 4
March 27, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 27, 2019
TTTT90AP-1XR
General Specifications
Operating Frequency Band 2496 – 2690 MHz
Antenna Type Sector
Band Single band
Performance Note Outdoor usage
Mechanical Specifications
RF Connector Quantity, total 8
RF Connector Quantity, high band 8
RF Connector Interface 4.1-9.5 DIN Female
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material Low loss circuit board
Radome Material PVC, UV resistant
RF Connector Location Bottom
Wind Loading, frontal 559.0 N @ 150 km/h
125.7 lbf @ 150 km/h
Wind Loading, lateral 114.0 N @ 150 km/h
25.6 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph
page 3 of 4
March 27, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 27, 2019
TTTT90AP-1XR
Dimensions
Length 1610.0 mm | 63.4 in
Width 307.0 mm | 12.1 in
Depth 118.0 mm | 4.6 in
Net Weight, without mounting kit 15.5 kg | 34.2 lb
Column Spacing 58 mm | 2 in
Packed Dimensions
Length 1740.0 mm | 68.5 in
Width 413.0 mm | 16.3 in
Depth 257.0 mm | 10.1 in
Shipping Weight 23.3 kg | 51.4 lb
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
CE Compliant with the relevant CE product directives
China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV)
Included Products
BSAMNT--3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top
BSAMNT
bracket set and one bottom bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
page 4 of 4
March 27, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 27, 2019