Beruflich Dokumente
Kultur Dokumente
1. In the “Map Services” section open the “Maximo Service Request and Workorder” record to
display the “Service Layers” sub-section
2. Click the “Select Layers” button. The below dialog box is displayed.
9. Click Save
10. Click on the “Create/Update GIS relationship Configuration” button
13. Click the “New Row” button and update the new line as follows
14. Click OK
15. Click OK when below warning message is displayed
19. Check the checkbox next to “Work Order Point” and click OK
20. Expand the “Work Order Point” record
21. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WORKORDERPOINT_S
Select Parent MBO – Work Order
System of Record – Maximo
22. Click the “Execute GIS Configuration” button
23. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXWONUM
DESCRIPTION
MXSITEID
24. Click Save
25. Click on the “Create/Update GIS relationship Configuration” button
26. In the dialog box displayed click New Row button.
27. In the dialog box displayed; update the record as below
28. Click OK
29. Click OK when warning message is displayed
30. The Service layer record gets updated as follows
31. In the “Map Services” section open the “Maximo Service Request and Workorder” record to
display the “Service Layers” sub-section
32. Click the “Select Layers” button. The below dialog box is displayed.
33. Check the checkbox next to “Work Order Polygon” and click OK
34. Expand the “Work Order Polygon” record
35. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WORKORDERPOLY_S
Select Parent MBO – Work Order
System of Record – Maximo
36. Click the “Execute GIS Configuration” button
37. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXWONUM
MXSITEID
38. Click Save
39. Click on the “Create/Update GIS relationship Configuration” button
40. In the dialog box displayed click New Row button.
41. In the dialog box displayed; update the record as below
42. Click OK
43. Click OK when warning message is displayed
44. The Service layer record gets updated as follows
Define Service Layers for “IW Water Network”
1. In the “Map Services” section open the “IW Water Network” record to display the “Service
Layers” sub-section
2. Click the “Select Layers” button. The below dialog box is displayed.
12. Click OK
13. Click OK when warning message is displayed
14. The Service layer record gets updated as follows
15. In the “Map Services” section open the “IW Water Network” record to display the “Service
Layers” sub-section
16. Click the “Select Layers” button. The below dialog box is displayed.
17. Check the checkbox next to “Reservoir” and click OK
18. Expand the “Reservoir” record
19. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WRESERVOIR_S
Select Parent MBO – LOCATIONS
System of Record – Maximo
20. Click the “Execute GIS Configuration” button
21. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXLOCATION
MXSITEID
22. Click Save
23. Click on the “Create/Update GIS relationship Configuration” button
24. In the dialog box displayed click New Row button.
25. In the dialog box displayed; update the record as below
26. Click OK
27. Click OK when warning message is displayed
28. The Service layer record gets updated as follows
29. In the “Map Services” section open the “IW Water Network” record to display the “Service
Layers” sub-section
30. Click the “Select Layers” button. The below dialog box is displayed.
31. Check the checkbox next to “Abstraction point” and click OK
32. Expand the “Abstraction point” record
33. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WABSTRACTIONPOINT_S
Select Parent MBO – LOCATIONS
System of Record – Maximo
34. Click the “Execute GIS Configuration” button
35. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXLOCATION
MXSITEID
36. Click Save
37. Click on the “Create/Update GIS relationship Configuration” button
38. In the dialog box displayed click New Row button.
39. In the dialog box displayed; update the record as below
40. Click OK
41. Click OK when warning message is displayed
42. The Service layer record gets updated as follows
43. In the “Map Services” section open the “IW Water Network” record to display the “Service
Layers” sub-section
44. Click the “Select Layers” button. The below dialog box is displayed.
45. Check the checkbox next to “Pump Stations” and click OK
46. Expand the “Pump Stations” record
47. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WPUMPSTATION_S
Select Parent MBO – LOCATIONS
System of Record – Maximo
48. Click the “Execute GIS Configuration” button
49. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXLOCATION
MXSITEID
50. Click Save
51. Click on the “Create/Update GIS relationship Configuration” button
52. In the dialog box displayed click New Row button.
53. In the dialog box displayed; update the record as below
54. Click OK
55. Click OK when warning message is displayed
56. The Service layer record gets updated as follows
57. In the “Map Services” section open the “IW Water Network” record to display the “Service
Layers” sub-section
58. Click the “Select Layers” button. The below dialog box is displayed.
59. Check the checkbox next to “Connection Point” and click OK
60. Expand the “Connection Point” record
61. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – WSERVICECONNECTION_S
Select Parent MBO – LOCATIONS
System of Record – Maximo
62. Click the “Execute GIS Configuration” button
63. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXLOCATION
MXSITEID
64. Click Save
65. Click on the “Create/Update GIS relationship Configuration” button
66. In the dialog box displayed click New Row button.
67. In the dialog box displayed; update the record as below
68. Click OK
69. Click OK when warning message is displayed
70. The Service layer record gets updated as follows
Define Service Layers for “IW Sewer Storm Water Network”
1. In the “Map Services” section open the “IW Sewer Storm Water Network” record to display
the “Service Layers” sub-section
2. Click the “Select Layers” button. The below dialog box is displayed.
12. Click OK
13. Click OK when warning message is displayed
14. The Service layer record gets updated as follows
15. In the “Map Services” section open the “IW Sewer Storm Water Network” record to display
the “Service Layers” sub-section
16. Click the “Select Layers” button. The below dialog box is displayed.
17. Check the checkbox next to “Pump station” and click OK
18. Expand the “Pump station” record
19. In the “GIS OBJECT Configuration Parameters” section enter the below details
GIS Object Name – SSPUMPSTATION_S
Select Parent MBO – LOCATIONS
System of Record – Maximo
20. Click the “Execute GIS Configuration” button
21. From the dialog box displayed select only the below attributes and click OK. Ensure that no
other attribute is selected.
MXLOCATION
MXSITEID
22. Click Save
23. Click on the “Create/Update GIS relationship Configuration” button
24. In the dialog box displayed click New Row button.
25. In the dialog box displayed; update the record as below
26. Click OK
27. Click OK when warning message is displayed
28. The Service layer record gets updated as follows
Define Services tab
Define Advanced Settings
1. Under “Auto Create” section fill below details
a. Work Order
WO Feature Class - WORKORDERPOINT_S
WO Label - DESCRIPTION
b. Service Request
SR Feature Class - SRPOINT_S
SR Label – DESCRIPTION
Option Description
GIS_WTREATMENTPLANT Spatial GIS Object WTREATMENTPLANT_S
GIS_WRESERVOIR Spatial GIS Object WRESERVOIR_S
GIS_WABSTRACTIONPOINT Spatial GIS Object WABSTRACTIONPOINT_S
GIS_WPUMPSTATION Spatial GIS Object WPUMPSTATION_S
GIS_WSERVICECONNECTION Spatial GIS Object WSERVICECONNECTION_S
GIS_SRPOINT Spatial GIS Object SRPOINT_S
GIS_WORKORDERPOINT Spatial GIS Object WORKORDERPOINT_S
GIS_WORKORDERPOLY Spatial GIS Object WORKORDERPOLY_S
GIS_SSTREATMENTPLANT Spatial GIS Object SSTREATMENTPLANT_S
GIS_SSPUMPSTATION Spatial GIS Object SSPUMPSTATION_S
e. Click OK to close the dialog.
6.