Beruflich Dokumente
Kultur Dokumente
Signature of Candidate
Suraksha (150671716009)
I
ACKNOWLEDGMENT
We would like to express my sincere gratefulness to my guide Mr. Shashi kumar, Sr. lecturer of
the Mechanical Department R.C.M. Polytechnic (Haryana) for giving me the opportunity to
work under him and also providing excellent guidance, encouragement, moral support and
continuous assistance throughout the project work.
We also wish to express my deep sense of gratitude to Mr. Neetu Rohilla (lecturer, in
Mechanical Department RCM polytechnic) for his valuable support and help rendered by giving
me the permission to use their laboratory for carrying out my experiments.
We would also like to show my gratitude to my parents and family’s members for their love,
sacrifice, and support.
II
ABSTRACT
This project is on the design and construction of an automatic power hacksaw machine for
cutting of metal to different size and length with the help of hacksaw. The objective of this
project is to save man power and time in cutting metals in order to achieve high productivity. It
is a cutting machine with teeth on its blade used specially for cutting metals. The power to the
hacksaw is provided by the motors. The motor drives the pulley-1 connected to the rotor of the
motor. The pulley -1 to the flywheel-1 by belt drive. The flywheel -1 is coupled to the one end
of shaft-1 and the other end of shaft -1 is coupled to the pulley-2. Again pulley -2 is connected
to the flywheel -2 by belt drive. Flywheel-2 is coupled to the one end of shaft -2 and the other
end of shaft-2 the crank which is turn is connected to the connecting rod is connected to the
vertical arm connected to the horizontal arm. Rotary motion of the shaft is converted into
reciprocating motion of the hacksaw with the help of shaft and pulley. Work piece of desired
length be cut by feeding it to hacksaw by holding it into bench vice. The various component of
the machine were designed and constructed. Test was carried out on the machine using different
metals.
III
TABLE OF CONTENTS
Candidate’s Declaration i
Acknowledgement ii
Abstract iii
Table of contents iv
List of figures v
Introduction 1
Process 2
IV
LIST OF FIGURES