Beruflich Dokumente
Kultur Dokumente
0 Viewpoints
Home
About
Authors
Resources
Market Studies & Technology Selection Guides
Videos
Organizations
Services
Contact Us
Guest Blogging
Subscribe
ARC Login
Last year, the German Electrical and Electronic Manufacturers’ Association (ZVEI), published a guideline for
general and manufacturer-independent criteria for Industrie 4.0 products.
The reference architecture model Industrie 4.0 (RAMI 4.0) was developed as part of the standardization work
and represents the entire solution space for Industrie 4.0. In RAMI 4.0, technical standards are located along the
three axes “Architecture Layer”, “Lifecycle & Value Stream”, and “Functional Hierarchy”. Corresponding work
is currently taking place in the various Industrie 4.0 committees.
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 1/6
2/11/2017 Criteria for Industrie 4.0 Products - Industrial IoT/Industrie 4.0 Viewpoints
A second reference model called “Industrie 4.0 component” has also been published. This model describes how
an Industrie 4.0 product is embedded in an Industrie 4.0 network. An administration shell with corresponding
Industrie 4.0 communication is necessary. This means that the product is always an Industrie 4.0 component,
consisting of an “asset” and an “administration shell”. Both reference models impose requirements and are the
starting point for the derivation of the criteria for Industrie 4.0 products. Criteria were selected which would lead
to serious changes or which are a prerequisite for Industrie 4.0.
Sellers in the market use these criteria to decide which products can be labeled as Industrie 4.0-capable. At the
same time, companies can use these criteria as a guide for product development. For customers, the ZVEI
definition provides clarity about the performance and features that Industrie 4.0 products should have. “Product
Characteristics 2017” describes the minimum properties or characteristics that a product available today must
have to meet the criteria for Industrie 4.0 products.
Simplicity: The criteria for industrial 4.0 products and their product characteristics should be presented as
simply as possible, so that any company or organization can apply them without the help of third parties.
Own label instead of general label: There is no general label associated with the criteria for industrial 4.0
products and the necessary product characteristics. Each company or organization can use its own label,
reference it to the criteria, and refer customers to the criteria. Conversely, customers can actively ask if a
company label meets the criteria for industrial 4.0 products.
Free use: It is up to each company and organization to publicly use the criteria for industrial 4.0 products and
their product characteristics. They can be used, for example, in product catalogs, at trade fairs or for advertising.
Public use is explicit asked for; it also contributes to the deployment of the criteria for industrial 4.0 products.
Free of charge and for everyone: The use of the criteria for industrial 4.0 products and their product
characteristics is free of charge for companies and organizations. Anyone can use it for their products.
Executing associations and organizations: A vendor-independent entity defines the criteria for industrial 4.0
products in a solid and transparent process and publishes them. This ensures that the criteria for industrial 4.0
products are generally valid and that the correct and necessary technical product characteristics are used. A
change to the established criteria for industrial 4.0 products is only possible via this entity.
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 2/6
2/11/2017 Criteria for Industrie 4.0 Products - Industrial IoT/Industrie 4.0 Viewpoints
4) Network
Cross-manufacturer definite
identification of standardized data in
form characteristics with syntax for
eg:
4) Dynamic data
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 3/6
2/11/2017 Criteria for Industrie 4.0 Products - Industrial IoT/Industrie 4.0 Viewpoints
Unfortunately, only a German version is currently available. An English version of the paper is being worked on.
For the German version click here: http://www.zvei.org/Verband/Publikationen/Seiten/Industrie-40-
Produktkriterien-fuer-Industrie-40-Technologien.aspx
If you want to find out more information, please contact your ARC client manager or visit the platform Industrie
4.0 or the ZVEI website.
Share this:
1 Comment
Categories : Business Transformation, Discrete, Product Design
Tags : Industry 4.0, reference architecture, ZVEI
← Next Post
Previous Post →
Comments
1. Criteria for Industrie 4.0 Products | Industry 4.0 says:
March 20, 2017 at 7:14 AM
[…] post Criteria for Industrie 4.0 Products appeared first on Industrial IoT/Industrie 4.0 […]
Reply
Leave a Reply
Your email address will not be published. Required fields are marked *
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 4/6
2/11/2017 Criteria for Industrie 4.0 Products - Industrial IoT/Industrie 4.0 Viewpoints
Comment
Name *
Email *
Website
Post Comment
Click Here
Recent Posts
Search
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 5/6
2/11/2017 Criteria for Industrie 4.0 Products - Industrial IoT/Industrie 4.0 Viewpoints
About Us
Industrial Internet of Things and Industrie 4.0 Viewpoints is a professional blog owned and maintained by ARC
Advisory Group
Blog Archive
Categories
Tags
Analytics APM Architecture Automation Big Data Cloud Connected Cybersecurity Digital Transformation
Digitization Edge I4.0 IBM IIoT Industrial IoT Innovation IoT IT/OT machine learning Maintenance PLM
Predictive Analytics Predictive Maintenance Prescriptive Analytics Remote Monitoring SAP Sensors Services
Smart Manufacturing Software
Industrial IoT/Industrie 4.0 Viewpoints
Copyright © 2017 All Rights Reserved
iThemes Builder by iThemes
Powered by WordPress
https://industrial-iot.com/2017/03/criteria-industrie-4-0-products/ 6/6