Beruflich Dokumente
Kultur Dokumente
Fan Blades
Center Hub
Power Switch
Bladeless Fans
Rectifier
The rectifier is a device used to change the ac power into
pulsating dc. The basic rectifier is the diode. This diode is a
unidirectional device that operates as rectifier in the forward
direction. The three basic rectifier circuits using diodes are the
half-wave, full-wave center-tapped and full-wave bridge type.
Rectifier
The rectifier is a device used to change the ac power into
pulsating dc. The basic rectifier is the diode. This diode is a
unidirectional device that operates as rectifier in the forward
direction. The three basic rectifier circuits using diodes are the
half-wave, full-wave center-tapped and full-wave bridge type.
Ripple and Ripple factor
Irons, used to press the wrinkles out of clothes with the use of
heat, have been around for centuries. While they continue to
follow the same basic operating process, modern irons
incorporate steam as a way of efficiently pressing clothes while
minimizing the risk of scorching them.
Sole Plate
The sole plate, or base, of the iron is flat and roughly triangular in
shape. The modern metal of choice for sole plates is aluminum coated
with a non-stick material. The sole plate, which is heated and applied
to wrinkled clothing, allows a user to concentrate on small areas that
need extra attention.
Thermostat
Modern flat irons have thermostats built into them to let a user control
the sole plate temperature. More delicate fabrics require little heat
while heavy duty fabrics require much more heat. The thermostat is
essentially a spring with power contacts on the end mounted on a
metal post. Electricity passes through the contacts to heat the sole
plate.
PARTS OF WASHING MACHINE
Detergent Dispenser
On a front-loading machine, your detergent dispenser will
usually be a pull out drawer, or (usually with a top-loading
machine) it may be a part of the agitator. This drawer is
pretty straightforward – it’s where you put your liquid or
powdered detergent, whichever you choose to use, and your
fabric softener.
Controls, Dials & Buttons
The range of buttons and dials on different washing machine models can
be the stuff of nightmares for many mums, particularly if your new machine
in no way resembles your old one. What button do you press? Which way
should you point this dial?
1. Blender Jar
This is the receptacle into which the ingredients are placed. The blender jar sits
snugly or locks in place on top of the main base which houses the motor and blade
assembly. The bottom of the blender jar is open to allow the blade access to do its
job. Though many blender jars are made of glass they can also be plastic and
metal. Your more high-end blenders will have blender jars made from tempered
glass as well as having measurement markings on the side.
2. Blender Jar Lid
The jar lid covers the top of the blender jar allowing you to safely operate the
blender without your ingredients exploding from the jar. The lid is generally plastic
or glass and usually has a rubber stopper attached to form a tight seal.
3. Jar Lid Center Cap
The center cap is that small plastic thing found in the center of the lid. It helps to
keep liquids in but also allows you to add ingredients easily while the blender is
running.
PARTS OF MICRO OVEN