Beruflich Dokumente
Kultur Dokumente
Turning areas New concrete surfaces should have reached 80% of their
intended physical properties - generally only achieved after a
Entrance/exit areas
minimum curing period of 28 days. Existing concrete
Thoroughfares surfaces must be prepared to provide a clean, sound
substrate.
Advantages
Surfaces should be clean and dry with open capillaries, free
Flexible and tear resistant from laitance, oil, grease, curing compounds or other surface
contaminants which may prevent full and proper adhesion of
Multi purpose
the primer. All blowholes, and other surface undulations
Seamless and watertight greater than 1 mm in depth, should be repaired using
Nitomortar FC(B)*†.
Rapid application, reliable and safe
Temperature of the substrate during application must be
Available in a range of colours
between 5°C and 40°C.
Description Priming
Trafficguard UR200 is a multi-layer deck protection system Apply Trafficguard Primer to the prepared surface at a wet
comprising a primer, waterproof membrane and protective film thickness of 200 microns.
top coat. All components are applied in the liquid phase and
Whilst Trafficguard Primer is still wet, seed with Fosroc Anti
react chemically to form a tough, flexible, protective surface.
Slip Grain No. 3 at a rate of 0.5kg/m2 and allow to cure for 24
hours.
Properties
Membrane Application
Elongation Membrane
(ASTM D412) : > 100%
Apply Trafficguard Membrane to the primer surface at a wet
Tensile Strength
film thickness of 500 microns. For best results Trafficguard
(ASTM D412) : 6.0 N/mm2
Membrane should be applied with a notched trowel or
Tear Resistance
squeegee. Whilst Trafficguard Membrabe is still wet, seed
(ASTM D624) : 26.0 N/mm
with Fosroc Anti Slip Grain No. 2 at a rate of 0.5kg/m2 and
Crack Bridging ability
allow to cure for 16 hours at 25ºC.
(ASTMC1305) : Pass
Top Coat
Top coat
Apply Trafficguard Top Coat to the Membrane Coat at a wet
Elongation
film thickness of 300 microns. When application is complete
(ASTM D412) : > 200%
the system should be permitted to cure for 72 hours @ 35°C
Tensile Strength
or 7 days @ 25°C prior to being trafficked.
(ASTM D412) : 9 N/mm2
Trafficguard UR200
Estimating Precautions
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for
the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to
obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
United Arab Emirates Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
www.fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
Qatar, Tadmur telephone: 4432365 fax: 4419517 email: qatar@fosroc.com
UAE/0445/11/H
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
2 HAZARDS IDENTIFICATION
Flammable. Harmful in contact with skin and if swallowed. Irritating to respiratory system. Causes burns. May cause sensitisation by skin
contact. Harmful: possible risk of irreversible effects through inhalation, in contact with skin and if swallowed. May cause cancer. May
cause harm to the unborn child. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Possible risk
of irreversible effects.
CLASSIFICATION (1999/45) Carc. Cat. 2;R45, Repr. Cat. 2;R61. Xn;R21/22, R68/20/21/22. Muta Cat. 3;R68. C;R34. Xi;R37. R43.
N;R51/53. R10.
ENVIRONMENT
The product contains a substance which is toxic to aquatic organisms and which may cause long term adverse effects in the aquatic
environment.
PHYSICAL AND CHEMICAL HAZARDS
Heating will generate vapours which may form explosive vapour/air mixtures.
HUMAN HEALTH
Contains a substance which may be potentially carcinogenic. In high concentrations, vapours and aerosol mists have a narcotic effect and
may cause headache, fatigue, dizziness and nausea.
3 COMPOSITION/INFORMATION ON INGREDIENTS
DIBUTYL PHTHALATE: DBP 201-557-4 84-74-2 1-5% Repr. Cat. 2;R61 Repr. Cat. 3;R62 N;R50
4,4'-METHYLENEDIANILINE 202-974-4 101-77-9 1-5% Carc. Cat. 2;R45 Muta. Cat. 3;R68
T;R39/23/24/25 Xn;R48/20/21/22 R43
N;R51/53
TRIETHYLENETETRAMINE 203-950-6 112-24-3 1-5% C;R34 Xn;R21 R43 R52/53
1/ 6
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
4 FIRST-AID MEASURES
GENERAL INFORMATION
General first aid, rest, warmth and fresh air. Do not give victim anything to drink if they are unconscious.
INHALATION
Remove victim immediately from source of exposure. Keep the affected person warm and at rest. Get prompt medical attention.
INGESTION
NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly. Get medical attention immediately!
SKIN CONTACT
Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water.
Get medical attention promptly if symptoms occur after washing.
EYE CONTACT
Remove victim immediately from source of exposure. Make sure to remove any contact lenses from the eyes before rinsing. Promptly
wash eyes with plenty of water while lifting the eye lids. Get medical attention immediately. Continue to rinse.
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
Use: Alcohol resistant foam. Carbon dioxide (CO2). Dry chemicals, sand, dolomite etc. DO NOT use water if avoidable.
UNUSUAL FIRE & EXPLOSION HAZARDS
Fire causes formation of toxic gases.
SPECIFIC HAZARDS
The product is flammable, and heating may generate vapours which may form explosive vapour/air mixtures.
PROTECTIVE MEASURES IN FIRE
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet.
ENVIRONMENTAL PRECAUTIONS
Do not allow ANY environmental contamination.
SPILL CLEAN UP METHODS
DO NOT TOUCH SPILLED MATERIAL! Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into
containers. Flush with plenty of water to clean spillage area. Keep combustibles away from spilled material.
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact. Keep away from heat, sparks and open flame. Do not use contact lenses.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container. Store under well-ventilated
conditions at a temperature below 25°C.
STORAGE CLASS
Flammable liquid storage.
2/ 6
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
PROCESS CONDITIONS
Provide eyewash, quick drench.
ENGINEERING MEASURES
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
HAND PROTECTION
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION
If risk of splashing, wear safety goggles or face shield.
OTHER PROTECTION
Wear appropriate clothing to prevent any possibility of skin contact.
HYGIENE MEASURES
DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove
any clothing that becomes contaminated. Wash promptly with soap & water if skin becomes contaminated. Use appropriate skin cream to
prevent drying of skin. When using do not eat, drink or smoke.
APPEARANCE Liquid
COLOUR Straw
ODOUR Amine.
SOLUBILITY Slightly soluble in water.
RELATIVE DENSITY 1.05 @ 20 deg C
FLASH POINT (°C) 55 deg C
AUTO IGNITION >300
TEMPERATURE (°C)
3/ 6
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
11 TOXICOLOGICAL INFORMATION
INHALATION
Harmful by inhalation. May cause damage to mucous membranes in nose, throat, lungs and bronchial system.
INGESTION
Harmful if swallowed. May cause burns in mucous membranes, throat, oesophagus and stomach.
SKIN CONTACT
Causes burns. Harmful in contact with skin. May cause sensitisation by skin contact.
EYE CONTACT
Causes burns.
HEALTH WARNINGS
Known or suspected carcinogen for humans.
12 ECOLOGICAL INFORMATION
ECOTOXICITY
The product contains a substance which is toxic to aquatic organisms and which may cause long term adverse effects in the aquatic
environment.
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements. Absorb in vermiculite or dry sand and dispose of at a
licenced hazardous waste collection point.
14 TRANSPORT INFORMATION
PROPER SHIPPING NAME FLAMMABLE LIQUID, CORROSIVE, N.O.S. (SOLVENT NAPHTHA (PETROLEUM), LIGHT AROM.;
LOW BOILING POINT NAPHTHA, ISOPHORONEDIAMINE)
UN NO. ROAD 2924
ADR CLASS NO. 3
ADR CLASS Class 3: Flammable liquids.
ADR PACK GROUP III
TUNNEL RESTRICTION CODE (D/E)
HAZARD No. (ADR) 38
ADR LABEL NO. 3&8
HAZCHEM CODE •3W
UN NO. SEA 2924
IMDG CLASS 3
IMDG PACK GR. III
4/ 6
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
15 REGULATORY INFORMATION
LABELLING
RISK PHRASES
R10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R34 Causes burns.
R37 Irritating to respiratory system.
R43 May cause sensitisation by skin contact.
R45 May cause cancer.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R61 May cause harm to the unborn child.
R68 Possible risk of irreversible effects.
R68/20/21/22 Harmful: possible risk of irreversible effects through inhalation, in contact with skin and if
swallowed.
SAFETY PHRASES
S25 Avoid contact with eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S38 In case of insufficient ventilation, wear suitable respiratory equipment.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show label
where possible).
S53 Avoid exposure - obtain special instructions before use.
S57 Use appropriate containment to avoid environmental contamination.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
P11 Restricted to professional users.
STATUTORY INSTRUMENTS
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
APPROVED CODE OF PRACTICE
Classification and Labelling of Substances and Preparations Dangerous for Supply.
Safety Data Sheets for Substances and Preparations.
GUIDANCE NOTES
Workplace Exposure Limits EH40.
5/ 6
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
16 OTHER INFORMATION
GENERAL INFORMATION
The user must be instructed in the proper work procedure and be familiar with the contents of these instructions.
REVISION DATE 14/08/2010
REV. NO./REPL. SDS GENERATED 1
DISCLAIMER
The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in
accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using
the product in combination with any other product or any other process is the responsibility of the user.
6/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
2 HAZARDS IDENTIFICATION
Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
CLASSIFICATION (1999/45) Xi;R36/38. R43. N;R51/53.
3 COMPOSITION/INFORMATION ON INGREDIENTS
EPOXY RESIN (Number average MW <= 700 ) 500-033-5 25068-38-6 60-100% R43 Xi;R36/38 N;R51/53
4 FIRST-AID MEASURES
INHALATION
Move the exposed person to fresh air at once. Rinse nose and mouth with water. Get medical attention if any discomfort continues.
INGESTION
NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly. Get medical attention if any
discomfort continues.
SKIN CONTACT
Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water.
Get medical attention if any discomfort continues.
1/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
This product is not flammable. Use fire-extinguishing media appropriate for surrounding materials.
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet.
SPILL CLEAN UP METHODS
Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean
spillage area. Do not contaminate water sources or sewer.
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container.
STORAGE CLASS
Chemical storage.
PROCESS CONDITIONS
Provide eyewash station.
ENGINEERING MEASURES
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
2/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
APPEARANCE Liquid
COLOUR Straw
ODOUR Mild
SOLUBILITY Insoluble in water
BOILING POINT (°C) >200
RELATIVE DENSITY 1.10 20 deg C
FLASH POINT (°C) >150 deg C
STABILITY
Stable under normal temperature conditions.
CONDITIONS TO AVOID
Avoid excessive heat for prolonged periods of time.
HAZARDOUS DECOMPOSITION PRODUCTS
Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2).
11 TOXICOLOGICAL INFORMATION
INHALATION
Irritating to respiratory system.
INGESTION
May cause stomach pain or vomiting.
SKIN CONTACT
May cause sensitisation by skin contact. Irritating to skin.
EYE CONTACT
Irritating to eyes.
12 ECOLOGICAL INFORMATION
ECOTOXICITY
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
DEGRADABILITY
The product is not readily biodegradable.
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.
14 TRANSPORT INFORMATION
3/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
PROPER SHIPPING NAME ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (EPOXY RESIN (Number average
MW <= 700 ), SOLVENT NAPHTHA (PETROLEUM), LIGHT AROM.; LOW BOILING POINT NAPHTHA)
UN NO. ROAD 3082
ADR CLASS NO. 9
ADR CLASS Class 9: Miscellaneous
dangerous substances and
articles.
ADR PACK GROUP III
TUNNEL RESTRICTION CODE (E)
HAZARD No. (ADR) 90
ADR LABEL NO. 9
HAZCHEM CODE •3Z
UN NO. SEA 3082
IMDG CLASS 9
IMDG PACK GR. III
EMS F-A, S-F
UN NO. AIR 3082
AIR CLASS 9
AIR PACK GR. III
15 REGULATORY INFORMATION
LABELLING
RISK PHRASES
R36/38 Irritating to eyes and skin.
R43 May cause sensitisation by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
SAFETY PHRASES
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S37 Wear suitable gloves.
S57 Use appropriate containment to avoid environmental contamination.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
P5 Contains epoxy constituents. See information supplied by the manufacturer.
4/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
16 OTHER INFORMATION
GENERAL INFORMATION
The user must be instructed in the proper work procedure and be familiar with the contents of these instructions.
REVISION DATE 25/07/2010
REV. NO./REPL. SDS GENERATED 1
DISCLAIMER
The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in
accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using
the product in combination with any other product or any other process is the responsibility of the user.
5/ 5
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
2 HAZARDS IDENTIFICATION
Flammable. Harmful in contact with skin and if swallowed. Vapours may cause drowsiness and dizziness. Causes burns. May cause
sensitisation by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
CLASSIFICATION (1999/45) Xn;R21/22. C;R34. R43. R10, R52/53, R67.
ENVIRONMENT
The product contains a substance which is harmful to aquatic organisms and which may cause long term adverse effects in the aquatic
environment.
PHYSICAL AND CHEMICAL HAZARDS
Heating will generate vapours which may form explosive vapour/air mixtures.
HUMAN HEALTH
Contains a substance which may be potentially carcinogenic. In high concentrations, vapours and aerosol mists have a narcotic effect and
may cause headache, fatigue, dizziness and nausea.
3 COMPOSITION/INFORMATION ON INGREDIENTS
4 FIRST-AID MEASURES
GENERAL INFORMATION
General first aid, rest, warmth and fresh air. Do not give victim anything to drink if they are unconscious.
1/ 5
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
Use: Alcohol resistant foam. Carbon dioxide (CO2). Dry chemicals, sand, dolomite etc. DO NOT use water if avoidable.
UNUSUAL FIRE & EXPLOSION HAZARDS
Fire causes formation of toxic gases.
SPECIFIC HAZARDS
The product is flammable, and heating may generate vapours which may form explosive vapour/air mixtures.
PROTECTIVE MEASURES IN FIRE
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet.
ENVIRONMENTAL PRECAUTIONS
Do not allow ANY environmental contamination.
SPILL CLEAN UP METHODS
DO NOT TOUCH SPILLED MATERIAL! Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into
containers. Flush with plenty of water to clean spillage area. Keep combustibles away from spilled material.
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact. Keep away from heat, sparks and open flame. Do not use contact lenses.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container. Store under well-ventilated
conditions at a temperature below 25°C.
STORAGE CLASS
Flammable liquid storage.
1-METHOXY-2-PROPANOL WEL 100 ppm 375 mg/m3 150 ppm 560 mg/m3 Sk
2/ 5
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
PROCESS CONDITIONS
Provide eyewash, quick drench.
ENGINEERING MEASURES
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
HAND PROTECTION
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION
If risk of splashing, wear safety goggles or face shield.
OTHER PROTECTION
Wear appropriate clothing to prevent any possibility of skin contact.
HYGIENE MEASURES
DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove
any clothing that becomes contaminated. Wash promptly with soap & water if skin becomes contaminated. Use appropriate skin cream to
prevent drying of skin. When using do not eat, drink or smoke.
APPEARANCE Liquid
COLOUR Straw
ODOUR Amine.
SOLUBILITY Slightly soluble in water.
BOILING POINT (°C) 220
RELATIVE DENSITY 0.96 @ 20 deg C
STABILITY
Stable under normal temperature conditions.
CONDITIONS TO AVOID
Avoid heat, flames and other sources of ignition. Avoid contact with acids and oxidising substances.
HAZARDOUS DECOMPOSITION PRODUCTS
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
11 TOXICOLOGICAL INFORMATION
INHALATION
Harmful by inhalation. May cause damage to mucous membranes in nose, throat, lungs and bronchial system.
INGESTION
Harmful if swallowed. May cause burns in mucous membranes, throat, oesophagus and stomach.
SKIN CONTACT
Causes burns. Harmful in contact with skin. May cause sensitisation by skin contact.
EYE CONTACT
Causes burns.
HEALTH WARNINGS
Known or suspected carcinogen for humans.
3/ 5
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
ECOTOXICITY
Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements. Absorb in vermiculite or dry sand and dispose of at a
licenced hazardous waste collection point.
14 TRANSPORT INFORMATION
PROPER SHIPPING NAME FLAMMABLE LIQUID, CORROSIVE, N.O.S. (1-METHOXY-2-PROPANOL, BISPHENOL A POLYMER
WITH 5-AMINO-1, 3, 3-TRIMETHYLCYCLOHEXANEMETHANAMINE AND
(CHLOROMETHYL)OXIRANE)
ENVIRONMENTALLY No.
HAZARDOUS
SUBSTANCE/MARINE
POLLUTANT
UN NO. ROAD 2924
ADR CLASS NO. 3
ADR CLASS Class 3: Flammable liquids.
ADR PACK GROUP III
TUNNEL RESTRICTION CODE (D/E)
HAZARD No. (ADR) 38
ADR LABEL NO. 3&8
HAZCHEM CODE •3W
UN NO. SEA 2924
IMDG CLASS 3
IMDG PACK GR. III
EMS F-E, S-C
UN NO. AIR 2924
AIR CLASS 3
AIR SUB CLASS 8
AIR PACK GR. III
15 REGULATORY INFORMATION
LABELLING
Corrosive Harmful
4/ 5
REVISION DATE 14/08/2010 REV. NO./REPL. SDS GENERATED 1
RISK PHRASES
R10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R34 Causes burns.
R43 May cause sensitisation by skin contact.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R67 Vapours may cause drowsiness and dizziness.
SAFETY PHRASES
S25 Avoid contact with eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show label
where possible).
S51 Use only in well-ventilated areas.
STATUTORY INSTRUMENTS
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
APPROVED CODE OF PRACTICE
Classification and Labelling of Substances and Preparations Dangerous for Supply.
Safety Data Sheets for Substances and Preparations.
GUIDANCE NOTES
Workplace Exposure Limits EH40.
CHIP for everyone HSG(108).
NATIONAL REGULATIONS
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002. No. 1689.
16 OTHER INFORMATION
GENERAL INFORMATION
The user must be instructed in the proper work procedure and be familiar with the contents of these instructions.
REVISION DATE 14/08/2010
REV. NO./REPL. SDS GENERATED 1
DISCLAIMER
The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in
accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using
the product in combination with any other product or any other process is the responsibility of the user.
5/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
2 HAZARDS IDENTIFICATION
Vapours may cause drowsiness and dizziness. Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic environment.
CLASSIFICATION (1999/45) Xi;R36/38. R43. N;R51/53. R67.
3 COMPOSITION/INFORMATION ON INGREDIENTS
EPOXY RESIN (Number average MW <= 700 ) 500-033-5 25068-38-6 10-30% R43 Xi;R36/38 N;R51/53
4 FIRST-AID MEASURES
1/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
This product is not flammable. Use fire-extinguishing media appropriate for surrounding materials.
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet.
SPILL CLEAN UP METHODS
Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean
spillage area. Do not contaminate water sources or sewer.
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container.
STORAGE CLASS
Chemical storage.
1-METHOXY-2-PROPANOL WEL 100 ppm 375 mg/m3 150 ppm 560 mg/m3 Sk
2/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
PROCESS CONDITIONS
Provide eyewash station.
ENGINEERING MEASURES
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
HAND PROTECTION
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION
If risk of splashing, wear safety goggles or face shield.
OTHER PROTECTION
Wear appropriate clothing to prevent any possibility of skin contact.
HYGIENE MEASURES
DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove
any clothing that becomes contaminated. Use appropriate skin cream to prevent drying of skin. When using do not eat, drink or smoke.
APPEARANCE Liquid
COLOUR Pigmented
ODOUR Mild
SOLUBILITY Insoluble in water
BOILING POINT (°C) >200
RELATIVE DENSITY 1.39 20 deg C
FLASH POINT (°C) >150 deg C
STABILITY
Stable under normal temperature conditions.
CONDITIONS TO AVOID
Avoid excessive heat for prolonged periods of time.
HAZARDOUS DECOMPOSITION PRODUCTS
Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2).
11 TOXICOLOGICAL INFORMATION
INHALATION
Irritating to respiratory system.
INGESTION
May cause stomach pain or vomiting.
3/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
12 ECOLOGICAL INFORMATION
ECOTOXICITY
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
DEGRADABILITY
The product is not readily biodegradable.
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.
14 TRANSPORT INFORMATION
PROPER SHIPPING NAME ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SOLVENT NAPHTHA
(PETROLEUM), LIGHT AROM.; LOW BOILING POINT NAPHTHA, EPOXY RESIN (Number average
MW <= 700 ))
UN NO. ROAD 3082
ADR CLASS NO. 9
ADR CLASS Class 9: Miscellaneous
dangerous substances and
articles.
ADR PACK GROUP III
TUNNEL RESTRICTION CODE (E)
HAZARD No. (ADR) 90
ADR LABEL NO. 9
HAZCHEM CODE •3Z
UN NO. SEA 3082
IMDG CLASS 9
IMDG PACK GR. III
EMS F-A, S-F
UN NO. AIR 3082
AIR CLASS 9
AIR PACK GR. III
15 REGULATORY INFORMATION
LABELLING
4/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
RISK PHRASES
R36/38 Irritating to eyes and skin.
R43 May cause sensitisation by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R67 Vapours may cause drowsiness and dizziness.
SAFETY PHRASES
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S37 Wear suitable gloves.
S57 Use appropriate containment to avoid environmental contamination.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
P5 Contains epoxy constituents. See information supplied by the manufacturer.
STATUTORY INSTRUMENTS
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
APPROVED CODE OF PRACTICE
Safety Data Sheets for Substances and Preparations.
Classification and Labelling of Substances and Preparations Dangerous for Supply.
GUIDANCE NOTES
Workplace Exposure Limits EH40.
CHIP for everyone HSG(108).
16 OTHER INFORMATION
GENERAL INFORMATION
The user must be instructed in the proper work procedure and be familiar with the contents of these instructions.
REVISION DATE 25/07/2010
REV. NO./REPL. SDS GENERATED 1
5/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
DISCLAIMER
The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in
accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using
the product in combination with any other product or any other process is the responsibility of the user.
6/ 6
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
2 HAZARDS IDENTIFICATION
Harmful by inhalation, in contact with skin and if swallowed. Causes burns. May cause sensitisation by skin contact. Toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic environment.
CLASSIFICATION (1999/45) Xn;R20/21/22. C;R34. R43. N;R51/53.
3 COMPOSITION/INFORMATION ON INGREDIENTS
4 FIRST-AID MEASURES
INHALATION
Move the exposed person to fresh air at once. Rinse nose and mouth with water. NEVER MAKE AN UNCONSCIOUS PERSON VOMIT
OR DRINK FLUIDS! Keep the affected person warm and at rest. Get prompt medical attention.
INGESTION
DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly.
Provide rest, warmth and fresh air. Get medical attention immediately!
SKIN CONTACT
Remove affected person from source of contamination. Rinse the skin immediately with lots of water. Get medical attention promptly if
symptoms occur after washing.
EYE CONTACT
Remove victim immediately from source of exposure. Make sure to remove any contact lenses from the eyes before rinsing. Promptly
wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention.
1/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
EXTINGUISHING MEDIA
Use fire-extinguishing media appropriate for surrounding materials.
UNUSUAL FIRE & EXPLOSION HAZARDS
No unusual fire or explosion hazards noted.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container.
STORAGE CLASS
Corrosive storage.
PROTECTIVE EQUIPMENT
ENGINEERING MEASURES
Provide adequate general and local exhaust ventilation.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupational
exposure limit.
HAND PROTECTION
Use protective gloves made of: Nitrile. Viton rubber (fluor rubber). Polyvinylidene chloride/Polyethylene (PVD/PE).
EYE PROTECTION
Wear approved chemical safety goggles where eye exposure is reasonably probable.
OTHER PROTECTION
Wear appropriate clothing to prevent skin contamination or freezing. Provide eyewash station.
HYGIENE MEASURES
Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly with soap & water if skin becomes
contaminated. Promptly remove any clothing that becomes wet.
APPEARANCE Liquid
COLOUR Straw
ODOUR Sharp Amine.
SOLUBILITY Slightly soluble in water.
BOILING POINT (°C) 220
RELATIVE DENSITY 0.96 20 deg C
FLASH POINT (°C) 112 deg C
2/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
11 TOXICOLOGICAL INFORMATION
INHALATION
May cause irritation to the respiratory system. May cause sensitisation by inhalation. May cause respiratory allergy.
INGESTION
Causes burns. May cause chemical burns in mouth and throat. May cause stomach pain or vomiting.
SKIN CONTACT
May cause allergic contact eczema. Acts as a defatting agent on skin. May cause cracking of skin, and eczema. May cause
sensitisation by skin contact. Causes burns. Harmful in contact with skin.
EYE CONTACT
Extreme irritation of eyes and mucous membranes, including burning and tearing. Causes burns.
12 ECOLOGICAL INFORMATION
ECOTOXICITY
The product contains a substance which is very toxic to aquatic organisms and which may cause long term adverse effects in the aquatic
environment.
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.
14 TRANSPORT INFORMATION
PROPER SHIPPING NAME AMINES, LIQUID, CORROSIVE, N.O.S. or POLYAMINES, LIQUID, CORROSIVE, N.O.S
(BISPHENOL A POLYMER WITH 5-AMINO-1, 3, 3-TRIMETHYLCYCLOHEXANEMETHANAMINE AND
(CHLOROMETHYL)OXIRANE, ISOPHORONEDIAMINE)
UN NO. ROAD 2735
ADR CLASS NO. 8
ADR CLASS Class 8: Corrosive substances.
ADR PACK GROUP III
TUNNEL RESTRICTION CODE (E)
HAZARD No. (ADR) 80
ADR LABEL NO. 8
HAZCHEM CODE 2X
UN NO. SEA 2735
IMDG CLASS 8
3/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
15 REGULATORY INFORMATION
LABELLING
RISK PHRASES
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R34 Causes burns.
R43 May cause sensitisation by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
SAFETY PHRASES
S25 Avoid contact with eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show label
where possible).
S51 Use only in well-ventilated areas.
S57 Use appropriate containment to avoid environmental contamination.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
STATUTORY INSTRUMENTS
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716).
Control of Substances Hazardous to Health.
APPROVED CODE OF PRACTICE
Classification and Labelling of Substances and Preparations Dangerous for Supply.
GUIDANCE NOTES
Workplace Exposure Limits EH40.
Introduction to Local Exhaust Ventilation HS(G)37.
CHIP for everyone HSG(108).
16 OTHER INFORMATION
GENERAL INFORMATION
The user must be instructed in the proper work procedure and be familiar with the contents of these instructions.
REVISION DATE 25/07/2010
REV. NO./REPL. SDS GENERATED 1
4/ 5
REVISION DATE 25/07/2010 REV. NO./REPL. SDS GENERATED 1
DISCLAIMER
The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in
accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using
the product in combination with any other product or any other process is the responsibility of the user.
5/ 5
Method statement constructive solutions
Trafficguard UR200
It is suggested that, for temperatures above 35°C, the following guidelines are adopted as good
working practice:
(i) Store unmixed materials in a cool (preferably temperature controlled) environment, avoiding
exposure to direct sunlight.
(ii) Keep equipment cool, arranging shade protection if necessary. It is especially important to
keep cool those surfaces of the equipment, which will come into direct contact with the material
itself.
(iii) Try to avoid application during the hottest times of the day, arrange temporary shading as
necessary.
(iv) Make sufficient material, plant and labour available to ensure that application is a continuous
process.
Equipment
It is suggested that the following list of equipment is adopted as a minimum requirement:
Protective clothing : Protective overalls
: Good quality gloves, goggles and face mask
Preparation equipment : Suitable equipment/materials to ensure proper
preparation of the substrate (see section 1.0)
Mixing equipment : 1 KW slow speed drill, 400 or 500 rpm,
plus Fosroc mixing paddle and suitably sized mixing
vessel
Application equipment : Notched trowel or squeegee
: Nap roller, or similar
Fosroc operates a policy to encourage the use, where possible, of approved or licensed applicators.
This ensures that repairs are completed satisfactorily so that the long-term performance of the
materials is assured. For contractors who wish to apply the materials themselves Fosroc is also able
to offer technical assistance and training, either on-site or at its Training Centre in Dubai
Al Gurg Fosroc
LLC
Post Box 657, Dubai telephone: fax: email:
United Arab Emirates (+9714) 2039699 (+9714) 2859649 agf@fosroc.com
www.fosroc.com Registered Office: 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Estate, Rashidiya, Dubai
constructive solutions
Attention to full and proper preparation of the substrate is essential for complete repair adhesion.
1.1 New concrete, or cementitious substrates should be at least 28 days old and have moisture
content not exceeding 5%.
1.2 Existing concrete floors, which require refurbishment, must be prepared to ensure a strong
adhesive bond between the flooring system and the existing floor.
1.3 The substrate (new or existing) should be clean, sound and free from contamination such as
mortar and paint splashes curing compounds, oil and grease. Excess laitance deposits are
best removed by light mechanical scabbling, grinding or grit/captive blasting followed by
vacuum cleaning to remove dust debris. All preparation equipment should be of a type
approved by Fosroc.
1.4 All blowholes and other surface undulations greater than 1 mm in depth should be repaired
using Nitomortar FC (B).
1.5 Oil and grease contamination must be completely removed by grinding down to sound, clean
concrete. Alternatively, captive/grit-blasting techniques can be used to provide the required
substrate.
1.6 Where these methods are considered impracticable, alternative methods may be considered
but a clean, sound and dry substrate must still result. In particular it is essential that the
substrate does not suffer from conditions of rising damp. Fosroc must approve any alternative
preparations prior to commencement of work, as we will undertake no responsibility under any
other condition.
2.1 Immediately prior to priming, the substrate should be thoroughly cleaned to remove any
remaining traces of dust or other loose material
2.2 Apply Trafficguard Primer to the prepared surface at a rate of 0.2 to 0.3 ltr/m².
2.3 Whilst Trafficguard Primer is still wet, seed with Fosroc Antislip Grain No. 3 at an estimated
rate of between 0.5kg/m² and allow curing for 24 hours.
2.4 Remove excess antislip grains after about 16 hours of drying time. Prior to removal of excess
antislip grain, always ensure that the grains are firmly embedded in the primer.
Page 2 of 3
constructive solutions
3.0 Membrane
3.1 For best results Trafficguard Membrane should be applied using a short hair lambswool roller.
2.5 Whilst Trafficguard Membrane is still wet, seed with Fosroc Antislip Grain No. 2 at an estimated
rate of between 1kg/m² and allow curing for 16hours.
3.3 Remove excess antislip grains after about 16 hours of drying time. Prior to removal of excess
antislip grain, always ensure that the grains are firmly embedded in the primer.
6.0 Cleaning
6.1 Tools and equipment should be cleaned immediately using Fosroc Solvent 102
This method statement is offered by Fosroc as a ‘standard proposal’ for the application of
Trafficguard UR200. It remains the responsibility of the Engineer to determine the correct method
for any given application. Where alternative methods are to be used, these must be submitted to
Fosroc for approval, in writing, prior to commencement of any work. Fosroc will not accept
responsibility or liability for variations to the above method statement under any other condition.
Page 3 of 3