Beruflich Dokumente
Kultur Dokumente
9.4 Fleet ID
MENU: Vehicle Settings, Fleet ID
1 Select ”Vehicle Settings”, ”Fleet ID” 2 The display will indicate whether the
from the menu. Enter the new Fleet ID transfer has been successful. Press
1
using ” /∇” (enter one number at a ”Esc” to return to the previous menu.
time followed by ”SELECT”). 13
characters must be entered (blank char- Vehicle Settings
acters are entered in unused positions). Fleet id
Fleet id:
Vehicle Settings
Fleet ID An Transfer
is complete.
Fleet ID:
XXXX
Enter new Fleet ID:
CC 7658.8 km
CC 7658.8 km
3 The display will indicate if the transfer
was not successful.
Press ”Esc” to exit and return to the Press “Esc” and repeat the Set-up pro-
previous menu. cedure again, see item 1.
Press ”SELECT” when the fleet ID
has been entered. If this does not work carry out fault-
tracing diagnostics on the display, see
“10.1 Fault Diagnostics” page 57