Beruflich Dokumente
Kultur Dokumente
FX for DIANA
Solid pile and two soil layers
1
Description
Overview
Using various geometry tools:
- Creating a surface – Grid Surface
- Divide
- Cut
- Check Duplicates
Different approaches to interact
solid segments with each other or
with a surface
2
Model Definition
1. Geometry Definition
3
Model Definition
From Works-Tree right click on Ground solid shape and change the Display Mode to Wireframe
4
Model Definition
Main Menu: Geometry > Surface > Create > Grid Face…
5
Model Definition
Main Menu: Geometry > Solid > Divide …
6
Model Definition
Main Menu: Geometry > Check > Duplicates …
The yellow face shows the divide operation has been performed successfully
and the yellow face is correctly shared between two solid segments 7
Model Definition
Main Menu: Geometry > Primitive Feature > Cylinder …
8
Model Definition
Main Menu: Geometry > Check > Duplicates …
As can be seen there is no yellow surface along the cylinder solid segment. Therefore,
there is no correct interaction between cylindrical solid and ground solid segments. 9
Auto Mesh
2. Assign Auto Mesh
Arbitrary value
10
Mesh check
From Works-Tree right click on Mesh Set and select Hide All
As can bee seen from the picture, the highlighted part, which is located inside the cube,
represents an incorrect nodal connectivity (mismatching connectivity) between solid pile
elements and surrounding soil segments elements. To avoid this phenomenon we need to
correctly interact the solid segments at geometry level (i.e. before assigning mesh sets).
11
Boolean Operation – First method
Delete mesh sets from Works Tree
12
Boolean Operation
Repeat the same steps for the lower soil layer and the solid cylinder
13
Boolean Operation
Repeat the same steps for the lower soil layer and the solid cylinder
14
Model Definition
Main Menu: Geometry > Check > Duplicates …
15
Auto Mesh
Main Menu: Mesh > Auto Mesh > Solid …
Arbitrary value
16
Mesh check
From Works-Tree right click on Mesh Set and select Hide All
As can bee seen from the picture, the assigned mesh sets have a correct nodal connectivity
(i,e. there is no internal orange face) .
17
Divide – Second method
Undo the model to the beginning of the first approach (Go to Slide 8)
18
Model Definition
Main Menu: Geometry > Check > Duplicates …
19
Auto Mesh
Main Menu: Mesh > Auto Mesh > Solid …
Arbitrary value
20
Mesh check
From Works-Tree right click on Mesh Set and select Hide All
As can bee seen from the picture, the assigned mesh sets have a correct nodal connectivity
(i,e. there is no internal orange face) .
21
TNO DIANA BV TNO DIANA UK Ltd TNO DIANA North
Delftechpark 19a Ground Floor America Inc.
2628 XJ Delft Building 1000 3871 Seven Mile Road
The Netherlands Lakeside North Harbour Suite 260
T +31 (0) 88 34262 00 Western Road MI 48152
F +31 (0) 88 34262 99 Portsmouth PO6 3EZ Livonia
HTTP://TNODIANA.COM United Kingdom T +1 (0) 877 70 34262
T +44 (0) 23 9270 4175
F +44 (0) 23 9270 4001
www.tnodiana.com