Beruflich Dokumente
Kultur Dokumente
ASTM A 516 GR.60N PLATE SPECIFICATION
INDEX
1) Scope
2) Application
3) Codes and Specifications
4) Chemical Requirements
5) Mechanical Properties
6) Heat Treatment
7) Impact Testing
8) Ultra Sonic Testing
9) Surface Imperfection
10) Plate Surface Conditions
11) Tolerances as per ASTM A20
12) Documentation
13) Marking of Plates by Mill
1 Scope:
This specification covers the requirements for the supply of ASTM A516 Gr 60N.
2 Application:
Plates will be used for the construction of Potable Water Tanks. The tank will be built for Bu
Hasa Camp Accommodation. This plate material is used for tank shell, bottom, bottom annular
and roof & other miscellaneous items.
9. Surface Imperfection
Plates shall be free of any injurious defects, which could interfere with proper fabrication and
construction. Pitting of any size is not allowed.
10. Plate Surface Condition:
Reworking or welding on plates from mill is not acceptable. All surfaces shall be free of cracks,
imprint of scales, scratches, pitting’s, and deteriorated surface caused by lifting devices. No
painting/coating of any kind is permitted on the steel plates.
11. Tolerances as per ASTM A20:
Thickness under tolerance: Tolerance on thickness, length and width positive as per ASTM
A20 with no negative tolerances.
Out of square tolerance: The out of square of a plate shall be limited so that it shall be possible
to inscribe a rectangle with the dimensions of the ordered plate within the delivered size.
12. Documentation:
The material shall be supplied with a Material Test Certificate type 3.1 in accordance with EN-
10204.