Beruflich Dokumente
Kultur Dokumente
Project : Gudang.
Type of test : o Density and unit weight of Soil in Place by sand cone method, ASTM D-1556.
o The proctor test result is presented in report # ER.L.01/ DM.08.04/ 2018.
Results :
The points are recommended by client and illustrated at appendix A.1 and the sand cone testing at 4
points given result as follow :
Points Unit 1 2 3 4
Water content (field) (%) 7.56 16.71 11.88 8.56
Dry unit weight (field) (t/m3) 1.83 1.56 1.92 1.71
3
Dry unit weight (Laboratory) (t/m ) 1.64 1.64 1.64 1.64
Relative compaction (%) 101 98 92 100
Based on results of sandcone test, there is not testing point having relative compaction (RC) value less
than 90%, which in general the minimum acceptable value of relative compaction is ranging from 90 to
95%.
Jl. Opak 66, Surabaya. Telp. (031) 5678329 (Hunting) Fax. (031) 5678329 E-mail. testana_sby@yahoo.com
TESTANA ENGINEERING, Inc.
Soil Testings & Research Administration.
COPY
01.29.18.
A.1. DETERMINATION OF IN - PLACE SOIL DENSITYTESTANA
POINT # 1 2 3 4
Weight of jug + cone before used, W6 7739 7804 7786 7768
Weight of jug + cone after used, W7 3629 3998 3758 3818
Weight of sand, gs = (W3 - W1) / (W2 - W1) 1.407 1.407 1.407 1.407
REMARK
W1 = Weight (jug + cone) W5 = Weight (left sand in jug + cone)
W2 = Weight (full water in jug + cone) W8 = Weight (soil + can)
W3 = Weight (full sand in jug + cone) W9 = Weight of can
W4 = Weight (sufficient sand in jug + cone) W10 = (W6-W7) - (W4-W5)
Akses Jalan
•4
•2
•3
•1