Sie sind auf Seite 1von 7

TURNSTILES FOR THE DISABLED

BA3-2-I

CATALOGUE
GASTOP PREMIUM
Device’s application and description
Turnstiles are designed for assisting pedestrian The device’s main application is to support
access control at guarded passage ways, inside pedestrian traffic control at stadiums/sport facilities,
buildings and on the outside (under roofing), for (e.g. ticket control and fee collection) airports
traffic of the disabled or people with large luggage, (e.g. authorised personnel only passage ways, as well
or passage without strict control of pedestrian traffic. as directing passenger traffic), at railway stations
Devices are intended for cooperation with electronic (e.g. points of ticket control/access control and
systems of pedestrian traffic and personal access passenger traffic), points of access control in public
control. utility buildings, points of ticket control and fees
Controlling devices (i.e. reader, button, electronic (e.g. show facilities, exhibition halls, theatres,
control, infrared remote control) can be attached cinemas), access and time attendance control points
to the turnstile. in working places (e.g. dedicated areas at factories,
Devices are intended for continuous operation and offices).
they may be used in a high density of pedestrian
traffic zones.
1
3
2

5
4

7
6

8
9

10

11

12
13

Description

(1) Lock protecting against unauthorised persons' direction (green arrow indicating unlocking of the
access (key lock) to the mechanism and electronic mechanism/red cross indicating locking of the
unit (2) handles for removing the roof's lid, (3) roof mechanism), (8) swinging arm axis profile, (9)
housing, depending on a version, is made of AISI rotor's arms made of round profiles finished with
304 type steel, painted steel or zinc steel, black plastic end caps, (10) protection against person
(4) connection between the roof and side legs, (5) access to the forbidden zone inside the turnstile, (11)
rubber protection of the connection between side leg of the turnstile equipped with pictograms,
mechanism in the roof and the rotor (black color), (12) part of the rotor equipped with a bearing fixed
(6) side leg of the device prepared for leading cables to the ground, (13)  base with holes for fixing the leg
inside the profile from the ground to the mechanism to the ground with bolts.
and electronic unit, (7) information pictograms –
identify status of the mechanism's locking for each
Operation

Turnstiles are equipped with a mechanism controlled The device’s mechanism is equipped with a bi-
by an electronic processor chip. The processor chip, directional pedestrian traffic control mechanism, that
having received a signal from an external device is, controllers for each access direction separately
(e.g. card reader, switch/button - 0V signal) and can be connected to the device.
verified the arms’ position, takes control over Information pictograms – identify status of the
locking and unlocking the arms’ movement. The mechanism's locking for each direction.
swinging arms' position measurement system enables
smooth operation and efficient functioning of the
device.
Main functions

VISUAL INFORMATION (PICTOGRAMS) ENTRY AND EXIT CONTROL


Visual information identifies unlocking or The device’s mechanism is equipped with a
locking status of the device arms’ movement. system supporting pedestrian traffic control
Green arrow informs that the device’s unlocking in both traffic directions (entry/exit from the
status is active. Red cross informs about the control zone). In case of pedestrian traffic
status of locking arms movement/rotation for the “collision”, the chip remembers external
traffic defined direction. signals received alternately.

CLUTCH ARMS' MOVEMENT AID SYSTEM


The device is equipped with a clutch separating Supporting arms rotary motion is a
driving gear from arms. The clutch adjust the mechanical system supporting arms
torque of arms, when it encounters an obstacle. positioning to the default position, so
called ”locked position”.
Device's functions
OTHER FUNCTIONS
MECHANISM
● Simplified assembly to the foundation with glued anchor
● System of locks for both arms' sections.
bolts.
● Locking the backward motion.

Cable ducts between the foundation and the electronic unit.
● Unlocking the locking system in case of voltage decay.
● Mechanical support for positioning the arms.
TECHNICAL PARAMETERS
ELECTRONIC UNIT Power supply voltage: (2x) ~24VAC
● Steering input for the first direction (e.g. for connecting Maximum power consumption: (2x) 130 VA
a card reader and control button).
Maximum current consumption: (2x) 5A
● Steering input for the second direction (e.g. for
connecting a card reader and control button).
Steering signal: (max. 0.5sec)
Feedback signal: 0V
● Feedback signal informing about the arms’ rotation being
done (Normal Closed or Normal Open). Operation temperature: -25 to +50°C
Storage temperature: -30 to +60°C
● Input to calibrate the arms’ position.
Maximum humidity: 10-80%
● Input to program the processor.
Operation environment: inside and outside buildings
IP protection rate: IP 44
CONTROLLING SOFTWARE Net weight: ~280 kg
● Function of operation for both directions of pedestrian
traffic.
● Function of remembering external signals during a
person passage cycle.
● Function of calibration the rotors' and swing arms’ zero
position.
Device's versions (finishing)

BA3-2-3-NNN BA3-2-3-OON BA3-2-3-OOO BA3-2-3-MMN


Frame: stainless steel * Frame: hot zinced steel* Frame: hot zinced steel* Frame: painted steel*
Roof: stainless steel* Roof: hot zinced steel* Roof: hot zinced steel* Roof: painted steel*
Rotor: stainless steel* Rotor: stainless steel* Rotor: hot zinced steel* Rotor: stainless steel*

* - stainless steel (N) stands for steel 1.4301 made in accordance to the European norm EN-10088,
* - painted steel (M) stands for powder painted steel with zinc underlayer. Reference to the RAL pallete is required when ordering the painted version,
* - hot zinced steel (O) has a coating properties in accordance to the ISO 1461 norm.

Device's versions (height)


Device's version Height 2500 mm Height 2400 mm

BA3 – 2 – I - XXX* O

BA3 – 2 – I – XXX* - LOW O

* - „XXX” - stands for the device finishing version.

Distributor

All information given herein are valid for the moment of publishing. GASTOP reserves the right to introduce changes to the offer herein, concerning both the models as well as their
construction and equipment. This document does not constitute an offer as understood by the law and is published for information only. Equipment versions presented in this
catalogue may not be available. Visualisations and photos of products presented herein may not show technical solutions adopted, properties of materials or colours used in detail.
In order to define the abovementioned parameters, it is advised to turn to an authorised distributor or the device producer directly for more information.

All Rights Reserved to GASTOP LTD

Das könnte Ihnen auch gefallen