Beruflich Dokumente
Kultur Dokumente
Indian Standard
HEXAGON HEAD BOLTS, SCREWS AND NUTS
OF PRODUCT GRADE C
PART 2 HEXAGON HEAD SCREWS
( SIZE RANGE M5 TO M64 )
( Third Revision
First Reprint JULY Ii94
UDC 621’882’211
@ BIS 1992
NATIONAL FOREWORD
This Indian Standard ( Part 2 ) which is identical with IS0 4018 : 1988 ‘Hexagon head screws -
Product grade, C’, issued by the International Organization for Standardization ( IS0 ), was
adopted by the Bureau of Indian Standards on the recommendation of the Bolts, Nuts and
Fastener Accessories Sectional Committee ( LM 14 ) and approval of the Light Mechanical
Engineering Division Council.
The standard was originally published in 1960 and revised in 1967. Subsequent to the
publication of 1967 edition, many changes had been agreed upon at international level which
have been reflected in IS 1367 series of standards covering ‘Technical supply conditions for
threaded steel fasteners’. Accordingly, the standard was published in 3 parts covering hexagon
head bolts, hexagon head screws, hexagon nuts.
The second revision of the standard was based on IS0 4018 : 1979 ‘Hexagon head screws -
Product grade, C’ issued by ISO. This third revision has been ma& by the adoption of
latest version of IS0 4018 published in 1988 as Part 2. The remaining parts of the standard,
that is, Parts 1 and 3 have also been revised by adoption of corresponding latest version of
international standards ( ISOs). The following major changes have been made in this revision:
a) The range of sizes has been enlarged to cover sizes from M5 to M64;
b) The range of nominal lengths has been extended up to 500 mm;
c) Non-preferred sizes have been included in separate table in line with IS0 4018;
d) The use of property class 3.6, is also permitted subject to the agreement between the
manufacturer and user.
In the 1967 version of this standard, the width across fla,ts for Ml0 and Ml2 size fasteners was
specified as 17 mm and 19 mm respectively. However, in the 1983 version this width across
flats was brought in line with IS0 4018 : 1979 and specified as 16 mm and 18 mm respectively
for Ml0 and Ml2 size fasteners. Recognizing the fact that the new width across flat dimensions
could not be implemented immediately, the Explanatory Note to 1983 version Of the standard
made a reference to this aspect. However, in the absence of specific coverage in the standard,
the new width across flat dimensions could not be implemented. Recognizing the difficulty of
immediate changeover to new width across flats, the Committee felt that definite time frame
may be given to the manufacturers for changeover and accordingly, it has been decided that
width across flats as per 1967 version, i.e. 17 mm and 19 mm for Ml0 and Ml2 size fasteners
shall be permitted till 31 December 1994.
It is also understood that some manufacturers are already equipped and manufacturing as per
new width across flat dimensions and supplies as per new specifications are encouraged.
During this period, the manufacture of fasteners as per old version shall be phased out and by
1 January 1995, it is expected that the entire fastener industry would have switched over to
new width dimensions across flat and no old width across flats shall be permitted.
In the adopted standard, certain terminology and conventions are not identical with those
used in Indian Standards; attention is specially drawn to the following:
a) Wherever the words ‘International Standard’ appear, referring to this standard, they
should be read as ‘Indian Standard’; and
b) Comma ( , ) has been used as a decimal marker while in Indian Standards the current
practice is to use point ( . ) as the decimal marker.
Indian Standard
HEXAGON HEAD BOLTS, SCREWS AND NUTS
OF PRODUCT GRADE C
PART 2, HEXAGON HEAD SCREWS
( SIZE RANGE M5 TO M64 )
( Third Revision )
0 Introduction
This International Standard is part of the complete IS0 product standard s&ies on hexagon drive fasteners. The series comprises:
a) hexagon head bolts (IS0 4614, IS0 4015, IS0 4016 and IS0 87651;
bt hexagon head screws (IS0 4017, IS0 4018 and IS0 8676);
c) hexagon nuts (IS0 4632, IS0 4033, IS0 4634, IS0 4635, IS0 4636, IS0 8673, IS0 8674 and lS0 8675);
f) hexagon flanged nuts (IS0 4161, IS0 7043 and IS0 7044);
g) structural bolting (IS0 4775, IS0 7411 to IS0 7414 and IS0 7417).
This international Standard gives specifications for hexagon head screws with threads from M5 up to and including M64, of product
grade C.
NOTE - This type of product is the same as that covered by IS0 4016 with the exception of threading up to the head.
If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from
existing International Standards, for example IS0 261, IS0 888, IS0 898-1, IS0 9662 and IS0 4759-l.
2 References
IS0 225, Fasteners - Bolts, screws and nuts - Symbols and designations of dimensions.
IS0 261, IS0 general purpose metric screw threads - General plan.
IS0 888, Bolts, screws and studs - Nominal lengths and thread lengths for general purpose bolts and screws.
IS0 @S-l, Mechanical properties of fasteners - Part 1: Bdts, screws and studs.
IS0 9662, ./SO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose bolt and nut
threads - Medium quality.
IS0 4759-1, Tolerances for fasteners - Part 1: Bofts, screws and nuts with thread diameters > 1,6 and < 1s mm and product
grades A, B and C.
IS0 8992 Fasteners - Generai requirements for bolts, screws and nuts.
2
IS 1363 (Part2 f ‘:‘.‘1992
IS0 401P: 1999 .’
3 Dimensions
Dimensions in millimetres
Washer face
permissible
X
a
t-7
2) d, z pitch diameter.
3
nux. 2.4 3 4 4,s 5,s 8 7,s 9 10.5 12 13,5 15 16,S 18
a
min. 6.8 1 125 1.5 1.X 2 2,s 3 3.5 4 4s 5 5.5 6
C meX. 0.5 0,S 0,6 0,6 606 0.8 0.8 0.8 0.8 0.8 1 1 1 1
dil MX. 6 7.2 16.2 12.2 14,7 18,7 24.4 28,4 35.4 42.4 48.6 56.6 67 75
dw min. 6.74 a.74 11.47 14,47 16.47 22 27.7 3vS 42.75 51.11 SW5 69.45 78.66 88.16
e min. 8.63 10.89 '14‘2 17.59 19,85 26,17 32,s 39.55 SO,85 80,79 71.3 82#6 93,56 104.86
k mm. f 3.125 1 3i625 1 4.925 1 535 1 7.05 1 9.25 1 11.6 1 14,l ) 17.65 1 21.45 1 24.95 ] .28,95 ) 33.75 1 38,75
max. i 3,875 1 +SE 1 5,875 1 8.85 1 7.95 1 10.75 1 13,4 I 15.9 I 19.75 1 23,s 1 27.05 1 31.05 j 36.25 1 41.25
k'2J min. t 2.19 1 234 1 3,45 1 4,17 1 4.94 1 6.46 1 8,12 1 9.87 1 12.36 1 15.02 1 17.47 1 20.27 / 23.03 1 27.13
r min. 02 425 0.4 0.4 O,% 0.8 0.8 0.8 1 1 1.2 1.6 2 2
nom. = mex. 8 10 13 16 q8 24 30 36 46 55 65 75 85 95
s
min. 7,64 9.64 t2,57 t5.57 17.57 23.16 29.16 35 45 53.8 63.1 73,l 82,8 92.8
13)
nom. min. WY.
12 11,l 12.9
16 15,l ?6,9
Ix) 18.95 21,OS
25 23s 26,uS
30 2wS 31,0S
35 33,75 3825
c
*
Table 2 - Non-preferred threads
Dimensions in millimetres
-v
rhmad MI Ml4 Ml8 MP M27 Mu M39 M45 M52 Me0
d...
-w
min. 19.15 24.85 31.35 38 46.55 55,s 64.7 I 74.2
.~ I 83:41
e min. 22.78 29.56 37.29 462 55.37 66.44 76.95 8625 99.21
nom. 8.8 11,5 14 17 21 25
---
28 33 36
k min. 8,35 10.6 13.1 16.1 19,95 23.95 26% 31.75 36.75 -
IlWX. 9.25 12.4 14.9 17.9 22,05 26.05 29.05 34.25 39.25
I I 1 I I
k’2) min. 5.85 I 7.42 9.17 11.27 I 13,97 I- 16,77 18,87 22.23 25.73
1 I I 1 I I
r min. 0.6 0.6 I 0.8 1 I 1 I 1 1.2 I 1.6
-I-
i
2
_
nom. = max. 21 27 34 41 50 60 70 80 90
s
min. 20.16 26,16 33 40 49 58.8 68,l 78,l 87.8
I 3’ I
nom. min. max.
30 28.95 31.05
---T---T----l--
I
35 33,75 366.25
40 38.75 41.25
70 68.5 71.5
80 78.5 81.5
t
90 88.25 91.75
100 9925 101.75
280
176
195.4
215,4
235.4
254.8
274.8
184
204.6
224,6
244.6
265,2
2852
I
-I-
----/--
__._
I 1 __---
Material ! Steel
Oomml
International Standard IS0 8992
rwuirements I
Tolerance ss
Thread
international Standards IS0 261, IS0 9652
d < 39 mm: 3.6 , 4.6, 4.8 .
Class11
d > 39mm: asagreed
properties d < 39 mm: IS0 898-l
International Standards
d> 39mm:asaareed
Product grade 1 C
Tolemnces
International Standard 1 IS0 4759-l
I as processed
1) The designation symbols for the property classes acoording to IS0 898-l can also be used for thread sizes above M39, provided that the finished
product has all the properties assigned to the designation symbols in IS0 898-l.
5 Designation
Example for the designation of a hexagon head screw with thread M12. nominal length I = 60 mm and property class 4.6:
8
( Continued from second cover )
In this adopted standard, reference appears to certain International Standards for which Indian
Standards also exist. The corresponding Indian Standards which are to be substituted in their
place are listed below along with their degree of equivalence for the editions indicated:
International Corresponding Indian Standard Degree of
Standard Equivalence
IS0 225 IS 8535 : 1987 Bolts, screws, nuts and accessories - Identical
Terminology and nomenclature ( first revision )
IS0 261 IS 4218 ( Part 2) : 1976 IS0 Metric screw threads: Part 2 Technically
Diameter pitch combinations ( first revision ) equivalent
IS0 888 IS 4206 : 1987 Dimensions for nominal lengths and thread Identical
lengths for bolts, screivs and studs ( first revision )
IS0 898-l IS 1367 ( Part 3 ) : 1991 Technical supply conditions for Identical
threaded steel fasteners : Part 3 Mechanical properties and
test methods for bolts, screws and studs with full loadability
IS0 965-2 IS 4218 ( Part 6 ) : 1978 IS0 metric screw threads : Part 6 Technically
Limits of sizes for commercial bolts and nuts ( diameter range 1 equivalent
to 52 mm ) ( first revision )
IS0 3269 IS 1367 ( Part 17 ) : Technical supply conditions for threaded Technically
steel fasteners : Part 17 Acceptance criteria ( under preparation ) equivalent
IS0 4042 iS 1367 ( Part 11 ) : Technical supply conditions for Technicaily
threaded steel fasteners : Part 11 Electroplated coatings on equivalent
threaded steel fasteners ( under preparation )
IS0 4759-l IS 1367 ( Part 2 ) : 1979 Technical supply conditions for Technically
threaded steel fasteners : Part 2 Product grades and tolerances equivalent
( second revision )
IS0 8992 IS 1367 ( Part 1 ) : 1980 Technical supply conditions for Equivalent
threaded steel fasteners: Part 1 Introduction and general
information ( second revision: )
ALTERATION
In clause 5, the designation of hexagon head screw may be read as ‘Hexagon head screw
IS 1363 ( Part 2 )-IS0 4018--12x80-4’6’ in place of ‘Hexagon head screws IS0 4018-
Ml2 x80-4.6’.
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau o/ Indian Standards Act, 1986 to
promote harmonious development of the activities of standardization, marking and quality
certification of goods and attending to connected matters in the country.
Copyright
BIS has a copyright of all its publications. No part of these publications may be reproduced in
any form without the prior permission in writing of BIS. This does not preclude the free use, in
the course of implementing the standard, of necessary details, such as symbols and sizes, type or
grade designations. Enquiries relating to copyright be addressed to the Director ( Publications), BIS.
Amendments are issued to standards as the need arises on the basis of comments. Standards are
also reviewed periodically; a standard along with amendments is reaffirmed when such a review
indicates that no changes are needed; if the review indicates that changes are needed, it is taken
up for revision. Users of Indian Standards should ascertain that they are in possession of the
latest amendments or edition by referring to the latest issue of ‘BIS Handbook’ and ‘Standards
Monthly Addition’.
This Indian Standard has been developed from Dot : No. LM 14 ( 0160 )
Headquarters:
Southern : C.I.T. Campus, IV Cross Road, MADRAS 600113 235 02 16, 235 04 42
t 235 15 19, 235 23 15