Beruflich Dokumente
Kultur Dokumente
⌂ This subsec on sets the input forces for the connec on under inves ga on.
≡
F1 := max( 0 , 0) ⋅ kN = 0.00⋅ kN ← Force Along X Axis Note: All set of forces from all load combina ons
are checked in this design sheet. However,
F2 := max( 0 , 0.399) ⋅ kN = 0.40⋅ kN ← Force Along Y Axis only the most cri cal with the over-all most
onerous effect is presented! For cross
F3 := max( 11.484 , 6.216) ⋅ kN = 11.48⋅ kN ← Force Along Z Axis checking refer to so ware's file.
Adjus ng the forces and moments to account for the local axis of the fastener and/or weld group:
( F1 F2 F3 M1 M2 M3 ) := ( F3 F2 F1 M3 M2 M1 )
25 of 72
TempVer20.0_012018 | Engineer: D. Dumapit | Checked: S.M. Lomboy Jr.