Beruflich Dokumente
Kultur Dokumente
1. Launch eCatcher
2. From the login page select
Create a Free+ Account
3. Fill the Account name, your
User name and Password and
click Next
4. Fill your company details and
click Create
5. An Email will sent to you for
activation of the account
before one can login
Configure your Talk2M Account
First Time Login
Software download
eBuddy
Important: select a LAN IP address that does not conflict with the WAN IP
address (= they have to be in different ranges).
3c. eBuddy
System Configuration
Configure your eWON
Launching the Wizard
Check that the eWON WAN port is connected to a network with Internet
access. We will need it during next configuration steps.
Configure your eWON
System config 1
Click System
Enter a name for your eWON and specify
a new password, Click Next.
For security reasons, change the default password of the adm user.
Configure your eWON
System config 2
LAN/WAN Configuration
Default WAN port is at Port4.
Default LAN Ports are Port 1~3.
At this page, you can change the WAN
port to another port number.
After changing, Click Next.
Configure your eWON
System config 4
Dignosis
This page show that system configuration
has completed.
Click Finish
4b. Cosy Setup
Internet Configuration
Cosy Family
WiFi INTERNET connection
Type of Interface
Modem connection
LAN / WAN
USB
Cellular WIFI
Configure your eWON
Internet
• Click Internet.
• WiFi INTERNET connection type, at Interface:
You can choose WAN or WIFI connection.
• In this demo we choose Ethernet INTERNET
connection (WAN)
• Click Next
Configure your eWON
Internet 2
Talk2M Configuration
Configure your eWON
Talk2M wizard 1
UDP Connection
Checks the UDP access to the Talk2M server
The registration data (Activation Key or eWON name) is NOT stored in the eWON. It is only
used during the Talk2M wizard to retrieve the VPN keys. If, for any reasons, the wizard has
to be run again, the registration data will have to be re-entered.
5. Ensure Cosy remote connection Establish
Configure your eWON
Status Check
The eWON COSY setup is now completed. At the bottom right, there are 3 status icon.
M2Web
eCatcher From a PC, smartphone, tablet
• From a PC • Any web-browser, key in
• Open eCatcher
https://m2web.talk2m.com
• No need for software or app
6b. Remote Access thro eCatcher method
Remote access to Cosy
eCatcher method
• Disconnect the PC ethernet cable at
Cosy LAN port 1
Remote access to Cosy
eCatcher method
# Description
1 Reset button
4 USB slot
5 SD card slot
Front Panel LED’s
Label Description
Button input 1(Reset)
BI1
Green ON = Reset being pressed
PWR Power
Green ON = Power is present
User
USR Green ON+OFF slowly = Unit is OK
RED pattern = special attention required
KEY Digital IN 1 Status
Green ON = Input 1 detected
DI2 Digital IN 2 Status
Green ON = Input 2 detected
T2M Talk2M
Green ON = Talk2M VPN connection
established
@ Internet
Green ON = Internet is configured
Front Panel LED’s
of Cosy with 3G or Wifi modem
# Mark Description
SMA male connector for WIFI antenna
1 / SMA female connector for GSM
antenna*
Modem status
2 ST
Green ON = WiFi / 3G connected
Reception signal level
3
Red ON = Poor signal
Reception signal level
4
Red ON = Signal is OK
Reception signal level
5
Red ON = Good signal
Default port configuration
• Factory settings
LAN IP address 10.0.0.53
LAN Subnet Mask 255.255.255.0
Gateway 0.0.0.0