Beruflich Dokumente
Kultur Dokumente
Provide the following REQUIRED information to help us understand your installation requirements Work Order or Event ID# ______________________
Cellular Signature
Business Type Service Type 120/240 Volts 120/208 Volts 277/480 Volts
Connected Total
Lighting Misc Receptacles Water Heater Heat Pump Cooking Air Conditioning
Loads Motors
1st Largest Motor & Type Size LRA FLA Special Start Phase
Single Phase
HP* Amps Amps Amps
3 Phase
2nd Largest Motor & Type Size LRA FLA Special Start Phase
Single Phase
HP* Amps Amps Amps
3 Phase
*Horse Power
Aluminum Amps
Press Here to Print or Save To Save a copy - File - Print - select printer "Microsoft Document Image Writer".This will save a LoadSheet.tif file in your documents folder that can be attached to any e-mail or saved for future reference.
1 of 2
8/8/2016
Geothermal or Air to Air Heat Pump Load Information Sheet
Required Provide the following information Videos- GeoExchage Work Order or Event ID#
Required
New Overhead
System is going to be installed - Estimated date Service Type
Existing Underground
Required Type of installation - Check ONE and enter quantities:
No. of Units Units per building Units per Building Square footage
Open
Total Full-load amperage FLA Loop System
Closed
House Service: Size of service panel Amp Type of backup heating used
Required (Geothermal – Approved special rate circuits, list the equipment and their current to be installed in the approved geothermal load center):
Geothermal Panel Size Amp Brand Name of Panel Number of circuits available
Please contact DTE Energy to discuss the job with our Planning and Design personnel before the installation is started. DTE Energy needs to ensure
there is adequate voltage available or can be provided.
To Save a copy - File - Print - select printer "Microsoft Document Image Writer".This will save a LoadSheet.tif file in your documents
Press Here to Print or Save folder that can be attached to any e-mail or saved for future reference.
2 of 2
8/8/2016