Beruflich Dokumente
Kultur Dokumente
Select one:
a. mean down time
b. mean time to repair
c. mean time to failure
d. mean time between failures
……………………………………………………………………….
Q2 Benefits of design for maintainability
1)Reduced mean time to repair
2) increased maintenance staffing
3) increased reliability
4) reduced process utilisation
Select one:
a. both 1 and 3
b. both 3 and 4
c. 1,2, and 3
d. both 1 and 4
…………………………………………………………………………
Q3 At which stage design of maintainability is considered?
Select one:
a. at product development
b. at design stage
c. after a product reached customer
d. both a) and b)
…………………………………………………………………..
Q4 An individual who plans, organizes, directs, and controls the work of others in an
organisation.
Select one:
a. supervisor
b. employer
c. manager
d. producer
Q5 Important factors in shaping future leaders are
a. follow–through
b. mentoring
c. communication
d. all of the above
Q7_________ is the ability to maintain in the least amount of time at lowest cost.
Select one:
a. productivity
b. machinability
c. reliability
d. maintainability
Q8_________ is defined as the probability of a system to perform without failure for a given
time .
Select one:
a. machinability
b. reliability
c. testability
d. maintainability
Select one:
a. proactive maintenance
b. condition based maintenance
c. breakdown maintenance
d. none of the above
Q11________ is a device that has the capability of detecting impending mechanical and
electrical failures in motors and motor based systems at the early stages of fault
development.
Select one:
a. ultrasonic evaluation
b. vibration analysis
c. motor condition monitor
d. thermography
Q12_______ is defined as actions to retain an item in a state in which it can perform the
required function.
Select one:
a. Serviceability
b. Management
c. Repair
d. Maintenance
Q13_______ is an instrument with which one can measure the quantities and types of metallic
elements in a sample of oil.
Select one:
a. anemometer
b. spectrometer
c. thermometer
d. none of the above
Q14 ___________ is used for detection of crack growth through piezoelectric crystal.
Select one:
a. electromagnetic induction technique
b. magnetic particle technique
c. accoustic emission technique.
d. ultasonice testing
Q20________ is caused due to welding between soft and hard materials due to lack of lubricant.
Select one:
a. corrosion
b. Adhesive wear
c. Abrasive wear
d. Fatigue
Q21 Advantages of thermography are
a. reduce downtime
b. non-contact means of testing
c. reduce unnecessary material expenses
d. All of the above
a. preparation
b. disassembly
c. alignment
d. all of the above
Previous page
Previous page
Previous page