Beruflich Dokumente
Kultur Dokumente
General:
The below-mentioned oil types are suitable for the following pump types of the R5 series:
Vacuum pump RA 0010 / 00100 B / E / F RA 0165- 0305 D
In the operating manuals of the vacuum pump the lubricants of the types VM, VS, VSL and VE
(designations used by Busch) are indicated.
VM: mineral oil
VS/VSL: synthetic oil
VE: high-grade synthetic oil
In addition to this list the "Special oils" Busch sheet can be used.
This viscosity corresponds to an oil of the SAE 30 class in accordance with DIN 51511.
Examples for VM 100 lubricants:
Aral: Motanol 100 Avia: Avialup VD-L 100
BP: Energol CS 100 / RC-S 100 Mobil Rarus 427
Texaco: Ursa-Öl P 100 Servo Delben: Anderol 500
Schell: Talpa-Öl G 100 / Corena P 100 Esso: Umlauföl 100
This viscosity corresponds to an oil of the SAE 30 class in accordance with the DIN 51511. This oil is
particularly used in case of higher suction temperatures or an ambient temperature exceeding +40°C
due to its good thermal properties.
This oil is a synthetic oil for high operating temperatures (oil temperature up to 110°C).
The advantage of the VE 101 oil is that it can be used very well for humid processes (drying, removal of
ground-air, etc.) as it does only very badly or not at all emulsify with water.