Beruflich Dokumente
Kultur Dokumente
INTRODUCTION
This catalogue contains scope and impact factor of the journals in the area of Metallurgy
and its allied fields and intended to help you for submitting the manuscript in highly cited
scholarly publications. The information herein confined to the Journal impact factor
calculation for 2017, as published in the June 2018 Journal Citation Reports (JCR).
Impact Factor is a journal level metric, is the average number of times a journal’s
articles, specifically, those published in a two-year period were cited in 2017. The
sample illustration in calculating the 2017 Journal impact factor is depicted below.
Suggestions to increase the utility of such type of information services from the JKC are
always welcome.
Dr. N V Ramakrishna
TABLE OF CONTENTS
ACTA MATERIALIA
MINERALS ENGINEERING
Ceramics and superhard materials including diamond and cubic boron nitride may also be accepted
provided the subject material is presented as hard materials as defined above. The journal seeks
contributions that investigate novel alloy design concepts; studies of the relationships between chemical
composition, microstructure, and properties; novel methods of characterization and testing, novel
methods of synthesis and processing, especially those that result in improved or novel microstructures,
leading in turn to improved properties and novel applications. Articles focus on methods and processes
that reduce material and energy consumption, hence the cost of these materials will also be considered.
TOP
nanomaterials; nuclear materials; powder materials; recycling and environmental technologies; refractory
materials; surface engineering; and thin films and interfaces. Other coverage includes education
highlights, interviews, opinion, and TMS news. TOP
Broadly significant research papers that are of general interest in the field. Research papers that
are too narrowly focused or are based on only a small number of experiments will not be accepted.
TOP
mechanical working; solid state reactions; materials processing; welding & joining; surface treatment;
mathematical modelling; environment; biomaterials; and light metals.
A joint publication of ASM International and TMS (The Minerals, Metals and Materials Society) TOP
OXIDATION OF METALS
Oxidation of Metals is the premier source for the rapid dissemination
of current research on all aspects of the science of gas-solid reactions
at temperatures greater than about 400˚C, with primary focus on the
high-temperature corrosion of bulk and coated systems. This
authoritative bi-monthly publishes original scientific papers on kinetics,
mechanisms, studies of scales from structural and morphological
viewpoints, transport properties in scales, phase-boundary reactions,
and much more.
In addition, Oxidation of Metals publishes the results of frontier research concerned with deposit-induced
attack. Review papers and short technical notes are encouraged. TOP
secondary metallurgy, casting, chemical analysis, metal forming, near-net casting/shaping, hot rolling,
cold forming, forging, drawing, materials technology, mechanical properties, fatigue, creep, corrosion,
heat treatment, coating, welding/joining, machining, materials testing, chemical analysis, steel, metal,
stainless TOP
ISIJ INTERNATIONAL
The journal ISIJ International first appeared in 1961 under the title
Tetsu-to-Hagané Overseas. The title was changed in 1966 to
Transactions of the Iron and Steel Institute of Japan and again in 1989
to the current ISIJ International.
This journal published in English is a collection of the papers
contributed not only by members but also by researchers in Japan and
abroad, and also contains review articles written at the request of the
Editorial Board. Editing is done by both the domestic Editorial Board
and an international Advisory Board composed of distinguished
research authorities abroad. Popular topics and papers presented at
Frequency: Monthly the international conferences sponsored by ISIJ are featured. The
Publisher: ISIJ journal provides an international medium for the publication of
Impact Factor: 1.350 fundamental and technological aspects of the properties,
structure, characterization and modeling, processing, fabrication, and environmental issues of iron and
steel, along with related engineering materials. Regular Articles: An original article documenting
significant results that contribute to the extension of knowledge and promotion of our understanding, and
that is presented in such a way that qualified workers can replicate the key elements on the basis of the
information provided. Review Articles: An article about an extensive survey on one particular subject, in
which the already published information is compiled, analyzed, and discussed. Reviews are normally
delegated, but voluntary proposal of a review topic(s) by a prospective author(s) is welcome . TOP
The Journal of Materials Engineering and Performance publishes contributions on all aspects of materials
selection, design, processing, characterization, and evaluation. The scope includes all materials used in
engineering applications: those that typically result in components for larger systems. TOP
These issues include an extended news and features section focusing on strategic and technical
developments in the steel industry. They are widely circulated to members of the Institute Steel Division
and senior steel industry personnel worldwide, in addition to subscribers to Ironmaking & Steelmaking.
The combination of Steel World (previously a separate publication of the Institute of Materials)
and Ironmaking & Steelmaking offers an exceptional opportunity for information dissemination and
technical awareness in the industry. This journal uses Editorial Manager to peer review manuscript
submission. This journal gives authors the option to publish open access via our Open Select publishing
program, making it free to access online immediately on publication. TOP
The average period from submission to first decision in 2017 was 4 days, and that from first decision to
acceptance was 45 days. The final decision on the acceptance of an article for publication is made by the
Editorial Board.
Founded in 1955 through the USSR Academy of science
Covers theory of metals and metal alloys, their magnetic properties and their structure
Publishes scientific reviews and papers written by experts TOP
REVISTA DE METALURGIA.
Founded in 1965 at the National Center for Metallurgical Research
(CENIM), Revista de Metalurgia is a quarterly magazine, published in
English and Spanish, aimed at researchers, technicians and other
professionals working in the area of metallic materials. .
Metalurgia Magazine is included since 1997 in Web of Science: Journal Citation Reports (JCR), Science
Citation Index Expanded (SCI) and Current Contents - Engineering, Computing &
Technology; SCOPUS, CWTS Leiden Ranking (Journal indicators) Core publication, REDIB and DOAJ.
TOP
METALLURGIST
Metallurgist ('Metallurg') is a monthly journal for specialists working in
mining with ferrous and non ferrous metals special metals and alloys. It
has been published since 1956 and is rightly considered to be the
leading scientific-technical and industrial journal in its field.
Basic Topics covered: Perspectives in development of mining
metallurgy complexes; Scientific-Technical developments; Diagnostics
and Repairing of equipment; Patents and know-how; News about
foreign machinery and equipment; Quality of materials and end-
products; Modern technologies and equipment; Automization and
Control; Protection of labour; Protection of the environment; Saving of
resources; Economics and marketing; Professional training;
Frequency: Monthly Presentation of companies; History of metallurgy; Decorative metal
Publisher: Springer
works.
Impact Factor: 0.347
STEEL IN TRANSLATION
The industrial engineering journal Steel in Translation covers theoretical
and applied problems of ferrous metallurgy. It presents material
translated from the two leading Russian ferrous metallurgical journals –
Stal" and Izvestia VUZ Chernaya Metallurgiya – reflecting the state of
iron- and steelmaking in the former Soviet Union. Steelmakers and
equipment suppliers worldwide regard Steel in Translation as a cost-
effective means of monitoring progress and assessing opportunity in a
marketplace that now invites participation from the West. Coverage
ranges wide, including such topics as Blast furnaces; Steelmaking; Cast
iron; Metal science, physics, and heat treatment; Electrical metallurgy of
Frequency: Monthly
steel and ferroalloys; New metallic materials and processes; Metal
Publisher: Springer
working, rolling, pipe and tube
Impact Factor: 0.30
production; Casting; Automation of processes and plant equipment; Industrial economics; Resource
conservation; Ecology and industrial waste recycling; and Physical chemistry and theory of metallurgical
process. PEER REVIEW: The journal represents a selection of translated materials from two Russian
ferrous metallurgical journals: Stal’ and Izvestiya Vysshikh Uchebnykh Zavedenii. Chernaya Metallurgiya.
TOP
COKE AND CHEMISTRY