Beruflich Dokumente
Kultur Dokumente
Statement
.
Compliance for Contact with Foodstuffs ”Eastlon” brand PET resins
p
o r
We, Far Eastern New Century Corporation, hereby certify that ”Eastlon” CB-612 , CB-612B,
CB-616 brand PET resin – produced in Taiwan/China – is fully in compliance with the
following items:
C
r y
1. The composition of the polymeric raw material is produced solely/exclusively on monomers,
other material and additives published in:
u p
EU Regulations: EU Regulation 10/2011, known as Plastic Implementing Measure –
t
PIM, has come into force on May 1, 2011.
en o u
2. The polymeric raw material is produced in conformity with:
r
US regulations: As specified in FDA CFR 21 § 177.1630 (f)(g)
C
German BfR
w
Dutch Warenwet
. G
e ly
3. The polymeric raw material is produced from the following monomers, comonomers other
- Monomers: N P o
material and additives encumbered with restrictions as published in EU Directive 10/2011:
r n
Terephthalic Acid (PTA)
e
CAS: 000100-21-0 SML = 7,5 mg/kg
-
te
Ethylene glycol (EG)
Comonomers
a t CAS: 000107-21-1 SML(T) = 30,0 mg/kg(3)
-
a s S t
Isophthalic Acid (IPA)
Additives and Stabilizers
CAS: 000121-91-5 SML = 5 mg/kg
r EAntimony
a o l
The EU migration test (No 10/2010) for Eastlon PET resins are as below:
Test Items Unit 3%Acetic acid 50% ethanol Spec.Limit
F
2
0.8
S
Overall migration
Terephthalic acid
mg/dm
mg/dm2
<0.1
Not detectable
(<0.03)
Not detectable
Not detectable
(<0.03)
Not detectable
10
7.5
-
Lithium = 0,6 mg/kg food or food simulant.
p .
Manganese = 0,6 mg/kg food or food simulant.
C
Coalition Of Notheastern Governors (CONEG) – Limits incidental level of these
metals in packaging/components to 100 ppm.
r y
EU directive 2004/12/EC and 2005/20/EC – does not exceed 100 ppm
For heavy metals with Packaging waste directive 94/62/EC and Amendments
t u p
additional questions.
en o u
Thanks for your choice of our products and we would be glad to answer any of your
C r
w . G SSP Division R&D
Senior Vice President
N P o
r n e
te a t
a s S t
r E id
a o l
F S