Beruflich Dokumente
Kultur Dokumente
Supports
Accurate and efficient design and detailing for all types
of supports
The design of supports for piping, ducting, and cable trays is a highly Business Benefits
specialised activity which has a significant impact on project costs and
schedules. z Integrated multi-discipline design
environment. Support designers
work in the same 3D design
AVEVA Multi-Discipline Supports™ (MDS) is a highly productive environment as all other layout
application for the design of all kinds of supports, from a complicated and detail design disciplines
framework encompassing integral hangers to a simple U-bolt. It (such as structural, piping and
ducting), so they can see the
delivers cost and schedule reductions in design man-hours, materials
latest revision of the full design at
and rework during construction and erection. MDS integrates all times, and work together with
completely with AVEVA PDMS™ and AVEVA Outfitting™, and is related engineering disciplines.
included as standard within AVEVA Everything3D™ (AVEVA E3D™).
z Integrity and clash-checking tools
allow the support design to be
With an emphasis on maximising design consistency and productivity, the MDS automatically checked.
application requires a minimum number of design decisions to create reliable
z Automatic fabrication drawings
and fully-detailed hanger and support designs. Support drawings are produced
with complete Material Take Off
automatically with all the necessary data for fabrication and erection of the (MTO) information.
support, including Material Take Offs and cut lengths.
z All MDS data is created within the
multi-discipline model database.
MDS is highly configurable and is delivered with an extensive range of standard
All of the sophisticated data-
support configurations. management, work-sharing,
access and change-management
controls are fully available for
managing support design.
www.aveva.com
Key Features
z MDS is a specialist support design
product for the design of pipe,
ducting, cable tray and multi-
discipline supports.
AVEVA MDS with Manufacturer Interface for Lisega - Licad AVEVA MDS with Manufacturer Interface for Carpenter and Paterson’s -
WitchHanger
z Each support configuration includes a number of support- z A wide range of predefined support configurations are supplied
specific rules that govern the way in which the support can with the MDS product, ranging from complex configurations
be applied. These rules are provided to ensure that only the such as multi-level structural frameworks to simple cantilevers.
appropriate supports are applied to pipes, depending upon Sample catalogues are provided for many structural steel
factors such as material, temperature or insulation. standards.
z Supports can be designed according to the rules in selected z Although most supports will be based on the support standards
support manufacturers’ software which have been interfaced for an individual company or project, MDS also includes the
to MDS. Currently supported are the design rules for Lisega, facility to quickly and easily create ‘specials’ to deal with any
Carpenter & Patterson and Pipe Supports Limited (PSL). The exceptional project requirements.
work process in the application is as follows:
z Supports can be combined with user-modelled structures to
1. Identify pipe to be supported and the steelwork/civil build up special support structures.
connection.
2. Read all the information from the design model and pass it to z Powerful modification capabilities allow supports to be modified
the support manufacturers’ software, where the user designs at any time, for example, to carry additional pipes, to connect to
the support. pipes that were not included in the design when the support was
3. On exiting the manufacturers’ software, the application builds first placed, or to adjust to new geometrical constraints.
the support in the model.
z Fabrication and erection drawings, complete with annotation, z Trunnions of all configurations are handled. They can, for
dimensions and detailed Material Take Off information can be example, be placed under tees, reducers, elbows and tube.
produced fully automatically. Details such as offsetting trunnions on pipe elbows and
creating reinforcing pads on elbows or straight pipes are
z All kinds of reports, including Material Take Offs by area, can also taken into consideration. The minimum and maximum
be produced using standard reporting tools. allowable lengths of trunnions can be controlled. Ancillary
supports can be created on trunnions. Finally, accurate
z Fabrication and erection drawings for all the supports are Material Take Offs with true cut lengths are available.
produced directly from the model database, ensuring
consistency between design and drawing.
Copyright © 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved. AMDS/DS/13/B.
Information in this datasheet relates to product version 12.1 and/or AVEVA E3D
version 1.1 unless otherwise stated. Tel +44 (0)1223 556655 | Fax +44 (0)1223 556666 | www.aveva.com/contact