Safety Instructions
Main Functions...
Connecting to Digital Receiver
Front Panel Information...
Rear Panel Information
Remote Control Unit
Operation Instruction.
System Menu Description
1. Channel ...
1.1. TV Channel.
1.1.1. Delete Program
1.1.2. Move Program..
1.1.3. Favorite program
1.1.4. Rename....
1.1.5. Modify PID
Delete all programs
Select the satellite list and favorite list
Sort the program:
Lock the program
1.2 Radio Channel
1.3. Add Channel
1.3.1 Add TP...
1.3.2. Delete TP.
2. Satellite...
2.1 Add Satellite
2.2 Edit Satellite...
2.3 Delete satellite.
2.4 Auto Sean...........
2.5 NIT Search.......
2.6 Satellite Search
2.7 PID Search.
3. System Setup.....
3.1. Language.
3.2 TV System
3.3 Auto Shut Down
3.4 OSD setting
3.5 Parent Lock..
4. Tools...
4.1 Informatio
4.2 Satellite Guide
4.3 Default Value...Safety Instructions
Approved use
The device is to be used only for receiving satellite programs; any other use is not allowed
Only the devices and system parts described in this manual may be connected to the
satellite receiver.
This receiver has been manufactured to satisfy international safety standards.
Please read the following recommended safety precautions carefully.
A
A
>
E>) HEI Ie
Never remove the cover or parts of it! Danger of electric shock! Repairs to
the device are to be performed only by authorized service personnel!
Avoid exposure to moisture and the insertion of foreign objects into the
device! Danger of electric shock!
Do not cover ventilation holes on the device!
Danger of fire due to overheating!
Use only original replacement parts of parts recommended by a dealer;
otherwise there is a danger of personal injury and damage to the device!
In case of violation, the guarantee is void!
Before cleaning, disconnect the power cord from the electric socket!
For cleaning of the receiver, use a cloth that is slightly dampened with pure
water; use on chemical additives!
Shut off device during thunderstorms and when not used for an extended
period of time!
During thunderstorms also remove the antenna cable!
The ground of the LNB cable must be directly connected to the system
ground for the satellite antenna. The grounding system must comply with
local regulations.
Power supply: 90-240V, 50-60Hz
Never stack other object on top of the satellite receiver.
Danger of overheating and fire!
The LNB connector cable has voltage in its center core. It is therefore
recommended that the receiver be disconnected from the mains power
before connecting or disconnecting this cable.
FAILURE TO DO SO COULD DAMAGE THE LNB.Main Functions
High speed auto searching programs based on LNB Frequency
DiSEqC1.2 supported
Maximum memory up to 4000 programs
6 Favorite programs groups.
Many Languages optional for menu
Signal level and quality indicate timely
Left, right and stereo audio optional
Infrared remote control and front panel operating
RS-232 connector for software upgrade
Elevation and azimuth of satellite antenna computable
22KHz switching signal , sustain the transfer of many satellites
Software upgraded by connecting with superior DSR
Nine pictures
Connecting to Digital Receiver
28 i
at
Connect the cable from the satellite antenna to SAT ANT IN with F connector
Connect RCA VIDEO/AUDIO jack to TV
Connect the RF output to TV
DISEqC Select switch: If you want to receive more satellite signal with a receiver, you
can use a DiSEqC switch. The function of DiSEqC is to encode and modulate 22KHz
square wave signal, so that the signal can identify satellites better.