Sie sind auf Seite 1von 123

Installation Guide for

AutoFEM Analysis Lite

Version 3.x

© 2018 AutoFEM Software LLP


Contents

Installation Guide for AutoFEM Analysis Lite (English) 6


1. AutoFEM Analysis Lite Installation 6
1.1 Requirements to software
1.2 Unpacking of the installation package
1.3 Installation of software (the client’s part)
1.4 Registration of AutoFEM Analysis in the installed AutoCAD
version
1.5 Launching AutoCAD with installed AutoFEM Analysis
1.6 Adjusting Language Settings
2. Uninstallation of AutoFEM Analysis 16
3. AutoFEM Analysis Lite Limitations 17
4. Frequently Asked Questions 20
Where can I get the support concerning AutoFEM?
Recommended computer parameters for efficient (professional)
work with AutoFEM Analysis
What versions of AutoCAD does AutoFEM Analysis 3.x work?
Does AutoFEM work with AutoCAD 2011?
Does AutoFEM Analysis work with AutoCAD Lite?
I'm working with another CAD system (Inventor,Mechanical
Desktop, Solidworks). Can I use AutoFEM?
5. Tips&Tricks 21
Requirements for the three-dimensional model for finite element
analysis
How can I apply a force (or pressure) to a certain area of the
part?
6. How to buy AutoFEM Analysis? 27
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 28
1. Installation von AutoFEM Lite 28
1.1 Anforderungen an Software
1.2 Auspacken des Installationspakets
1.3 Installation der Software (des Clients Teil)
1.4 Registrierung von AutoFEM in der installierten
AutoCAD-Version
1.5 Launching AutoCAD with installed AutoFEM Analysis
Contents
1.6 Anpassen der Spracheinstellungen
2. Deinstallation von AutoFEM Lite 39
3. AutoFEM Lite Einschränkungen 40
4. Häufig gestellte Fragen 43
Wo bekomme ich die Unterstützung über AutoFEM?
Empfohlene Computer-Parameter für eine effiziente (Berufs-)
Arbeit mit AutoFEM
Welche Versionen von AutoCAD funktioniert AutoFEM 2.x?
Funktioniert AutoFEM mit AutoCAD 2011?
Wird AutoFEM Lite mit AutoCAD Lite arbeiten?
Ich bin mit einem anderen CAD-System (Inventor, Mechanical
Desktop, Solidworks) arbeiten. Kann ich verwenden AutoFEM?
5. Tips & Tricks 45
Anforderungen an das 3D-Modell für die Finite-Elemente-Analyse
Wie kann ich eine Kraft (oder Druck) auf einen bestimmten
Bereich des Teils?
6. Wie kann ich AutoFEM Analysis kaufen? 51
Guide d'installation pour AutoFEM Lite (français) 52
1. Installation de AutoFEM 52
1.1 Exigences au logiciel
1.2 Ouverture du paquet d'installation
1.3 Installation du logiciel (de la part du client)
1.4 Enregistrement d'AutoFEM dans la version installée
d'AutoCAD
1.5 Lancement d'AutoCAD avec l'analyse de AutoFEM installé
1.6 Réglage des paramètres de langue
2. La désinstallation d'AutoFEM 63
3. AutoFEM Lite limitations 64
4. Questions fréquentes 67
Où puis-je obtenir le soutien technique concernant AutoFEM?
Paramètres informatiques recommandés pour le travail efficace
(professionnel) avec AutoFEM
Avec quelles versions d'AutoCAD AutoFEM Analyse 2.x
fonctionne?
Est-ce que AutoFEM fonctionne avec AutoCAD 2011?
Est-ce que AutoFEM Analyse ou AutoFEM Analyse Lite fonctionne
avec AutoCAD Lite?
Contents
Je travaille avec un autre système de CAO (Inventor, Mechanical
Desktop, Solidworks). Puis-je utiliser AutoFEM?
5. Trucs et astuces 69
Exigences au modèle 3D pour l'analyse des éléments finis
Comment puis-je appliquer une force (ou la pression) à une
certaine zone de la partie?
6. Comment on peut acheter l’Analysis d’AutoFEM? 74
Guía de instalación de Análisis AutoFEM Lite(español) 76
1. Instalación de Análisis AutoFEM Lite 76
1.1 Requisitos para el software
1.2 Desembalaje del paquete de instalación
1.3 Instalación del software (parte del cliente)
1.4 Inscripción de AutoFEM en la versión de AutoCAD instalada
1.5 Lanzamiento de AutoCAD con de AutoFEM instalado
1.6 Configuración de idioma
2. Desinstalación de Análisis AutoFEM Lite 87
3. AutoFEM Análisis Lite limitaciones 88
4. Preguntas más frecuentes 91
¿Dónde puedo obtener el apoyo con respecto a AutoFEM?
¿Cuáles son los requisitos del sistema se recomienda para
trabajar con AutoFEM Analysis?
¿Qué versiones de AutoCAD funciona AutoFEM Análisis?
¿Funciona AutoFEM con AutoCAD 2011?
¿Funciona el Análisis AutoFEM con AutoCAD Lite?
Estoy trabajando con otro sistema de CAD (Inventor, Mechanical
Desktop, Solidworks). ¿Puedo utilizar AutoFEM?
5. Consejos y trucos 93
Requisitos para el modelo sólido 3D para el análisis de elementos
finitos
¿Cómo puedo aplicar una fuerza (o presión) a un área
determinada de la pieza?
6. ¿Cómo puedo comprar el AutoFEM Análisis? 99
Guida all'installazione per AutoFEM (italiano) 100
1. Installazione di AutoFEM Lite 100
1.1 Requisiti per il software
1.2 Disimballaggio del pacchetto di installazione
1.3 Installazione del software (parte del cliente)
Contents
1.4 Registrazione di AutoFEM nella versione di AutoCAD installata
1.5 Avvio di AutoCAD con AutoFEM installato
1.6 Impostazioni della lingua
2. Disinstallazione di AutoFEM 111
3. Limitazioni di AutoFEM Lite 112
4. Domande Frequenti 116
Quale verione di AutoCAD lavora con AutoFEM Analysis?
Quali sono i requisiti di sistema per operare con AutoFEM
Analysis?
Funziona AutoFEM su AutoCAD 2011?
AutoFEM Analisys funziona su AutoCAD versione Lite?
5. Consigli e suggerimenti 116
Requisiti per l'analisi ad elementi finiti di modelli tridimensionali
Come posso applicare una forza (o pressione) per una certa
area della parte?
6. Come acquistare AutoFEM? 122
Installation Guide for AutoFEM Analysis Lite (English) 6

Installation Guide
for AutoFEM Analysis Lite (english)

Version 3.x

© 2018 AutoFEM Softw are LLP

6
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 7

1. AutoFEM Analysis Lite Installation

1.1 Requirements to software


AutoFEM Analysis Lite is a plugin for AutoCAD (system of computer design) for operational system
Windows XP/Vista/7/8/10 64-bit.
AutoFEM Analysis Lite 3.x works with AutoCAD x64 versions 2010, 2012, 2013, 2014, 2015, 2016,
2017, 2018, 2019.
AutoFEM Analysis Lite 3.x does not work with AutoCAD versions for MAC OS. AutoFEM Analysis Lite 3.x
does not work with AutoCAD 2011 (x64).

1.2 Unpacking of the installation package


Unpack the installation package autofem-x64.zip. Make sure that you have unpacked the distributive
package of the same capacity that your installed AutoCAD has (x64). The installation package contains
the following folders and files:

Files of AutoFEM Analysis Lite distributive package

The folder x64 contains Microsoft service files, necessary for the work of software programs in the
Windows environment .
For AutoFEM Analysis 3.x the file from the folder redist2017 must be installed in the system.
For AutoCAD versions 2010 and 2012, the file from the folder redist2008 must be installed in the
system.
For AutoCAD versions 2013 and 2014, the file from the folder redist2010 must be installed in the
system.
For AutoCAD versions 2015 and 2016, the file from the folder redist2012 must be installed in the
system (normally, the redists2012 are being installed with AutoCAD 2015/2016).
For AutoCAD versions 2017 and 2018, the file from the folder redist2015 must be installed in the
system (normally, the redists2015 is being installed with AutoCAD 2017/2018).
For AutoCAD version 2019 the file from the folder redist2017 must be installed in the system
(normally, the redists2017 is being installed with AutoCAD 2019).

These files can also be downloaded from the official website of Microsoft Corporation.

7
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 8

1.3 Installation of software (the client’s part)


For the installation to be a success, you must have the right to installing software programs on your
computer. Actuate the file "Setup-x64.exe". Select the language for the wizard’s work in the dialog which
appears and press OK. Then, perform the wizard’s options.

Selecting a language for installation

Installing the Microsoft Visual Studio redistributable packages.

8
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 9

Installation of AutoFEM Analysis Lite – Step 2

Installation of AutoFEM Analysis Lite – Step 3

9
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 10

Installation of AutoFEM Analysis Lite – Step 4

Installation of AutoFEM Analysis Lite – Step 5

10
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 11

Installation of AutoFEM Analysis Lite – Step 6

Installation of AutoFEM Analysis Lite – final step

1.4 Registration of AutoFEM Analysis Lite in the installed AutoCAD versions


After the successful copying of AutoFEM Analysis files, AutoFEM Launcher is starting, which provides
easy access to AutoFEM accompanying materials (such as Help, Tutorials, Verifications), AutoFEM
settings, and allows to start AutoFEM with the desirable AutoCAD version. If you want to immediately
start AutoFEM Analysis, do a double click on the desirable AutoCAD button or press the button "Start

11
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 12

AutoCAD ...". The access to the utility is available any time from the menu Start and folder AutoFEM
Analysis Lite 3.x | AutoFEM Analysis Lite 3.x.

Registration dialog of AutoFEM Analysis Lite in AutoCAD

Retrieval of AutoFEM from the menu Windows XP/Vista/7


Note! Since AutoCAD 2014 you may see the following message
window when you are starting AutoFEM which is not registered for
autoloading:

Click Load if you w ant to w ork w ith AutoFEM Analysis

12
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 13

1.5 Launching AutoCAD with installed AutoFEM Analysis Lite


After successful installation of the system and its registration in AutoCAD, activate AutoCAD in order to
start working with AutoFEM Analysis Lite. At the first run, the window of Lite Limitations will appear.

Window at the initial run of AutoCAD after installation of AutoFEM Analysis Lite

Note.
In some cases, for the ribbon with AutoFEM Analysis commands to appear, it is necessary to
manually reset 3D Workspace of AutoCAD. To do this, use the AutoCAD command
"WSCURRENT" with the option "3D Modeling".
In the AutoCAD window which will open, the ribbon with commands of AutoFEM Analysis Lite must
appear, as it is shown in the figure. Access to AutoFEM Analysis commands is available also from the
respective menu of AutoCAD.

13
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 14

AutoFEM Analysis commands in the menu and AutoCAD ribbon

3D Workspace of AutoCAD resetting

14
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 15

1.6 Adjusting Language Settings


AutoFEM Analysis is a multilingual application. The user can launch the software in one of five European languages:
English, German, French, Italian or Spanish.
On default, the system uses the languge of AutoCAD in which it is being launched. If AutoFEM has no such
language interface (for example, Turkish), English version is used. The user can select and set the AutoFEM
interface language pressing the button "AutoFEM Language Settings" and selecting desirable language. Selected
language is being assigned for all available AutoCAD versions and reflected in corresponding column of the start
dialog. It is possible to launch several instances of AutoCAD/AutoFEM with different language interface
simultaneously, running the AutoCAD/AutoFEM, then to change language settings and run next AutoCAD/AutoFEM
instance.

Adjusting language settings

15
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 16

2. Uninstallation of AutoFEM Analysis Lite


Retrieve the uninstall command from the folder AutoFEM Analysis Lite 3.x in the menu Start or use the
relevant command in the Section Install/uninstall programs at the Control Panel of Windows.

Retrieval of the AutoFEM uninstall command from the menu


Start | AutoFEM Analysis Lite 3.x in the Windows XP/Vista/7 environment
The system will be removed.

16
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 17

3. AutoFEM Analysis Lite limitations


Some studies are not available for AutoFEM Analysis Lite as depicted below:

Available (enabled) and unavailable (disabled) studies


Limitation for all studies:
Only a single solid or surface body can be selected for a study.
There is a limited number of model entities for applying loads/restrictions.

Limitations of boundary conditions for Static, Buckling and Dynamic Analysis are as follows:
There are only two types of mechanical loads for mechanical study: force and pressure.

17
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 18

Available loads are enabled on menu


You can use only full restriction (immovable fixation).

Available restraints are enabled on menu

Limitations of Frequency Analysis are as follows:


You can find only four lower natural frequency.
Forces applied to the design are not included in the calculation.
You have no possibility solve not fixed (spatially free) system.

Limitations of Forced Harmonic Oscillation Analysis (Harmonic Response) are as follows:


You have two types of mechanical loads for any study (force and pressure).
You cannot use the Mechanical Oscillator as a source of oscillations.

Limitations of Thermal Analysis (steady state) are:


You can use only three boundary conditions for thermal analysis: temperature, thermal power and convection.

18
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 19

Available thermal boundary conditions are enabled on menu

There are no any other limitations concerning the number of freedom degrees, reports, study controls, time limitation
etc.
You have fully workable FEA instrument for your purposes.

19
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 20

4. Frequently Asked Questions

Where can I get the support concerning AutoFEM?

If you encounter difficulties installing or using AutoFEM, the best way to try to resolve them is to go directly to our
technical support email: support@autofem.com. Please, be clear in describing your problem and tell us the version of
Windows, AutoCAD and AutoFEM, that you are using. We strongly recommend you to immediately contact with us
instead of searching with Google all questions, concerning AutoFEM installation and etc. It is more effective and
gives the results.

Recommended computer parameters for efficient (professional) work with AutoFEM


Analysis

Mathematical modelling of physical phenomena belongs to the class of the resource-intensive problems that require
serious computational resources. That is why, for efficient use of the finite element modelling system it is
recommended to use the most powerful computers accessible to the user.
Recommended computer parameters for efficient (professional) work with AutoFEM Analysis
Processor with support of 64-bit instructions, Intel i5, i7 series
RAM 8 GB min, 32-64 GB recommended
Operating system Windows XP/7/8 64-bit
Software AutoCAD x64, AutoFEM x64

What versions of AutoCAD does AutoFEM Analysis 3.x work?

The system of finite element analysis "AutoFEM Analysis 3.x" works with AutoCAD x64 2010, 2012, 2013, 2014,
2015, 2016, 2017, 2018, 2019 for Windows based operational systems on 64-bit platform.

Does AutoFEM work with AutoCAD 2011?

No, it doesn't. Only AutoCAD x64 2010, 2012-2019 are fully supported.

Does AutoFEM Analysis Lite work with AutoCAD Lite?

No, it doesn't. AutoFEM Analysis and AutoFEM Analysis Lite can be used only with full version of AutoCAD because
the 3D modelling workspace is necessary for finite-element analysis.

I'm working with another CAD system (Inventor,Mechanical Desktop, Solidworks). Can I
use AutoFEM?

AutoFEM Analysis works only inside AutoCAD's 3D environment, it does not work directly with Inventor, Mechanical
Desktop, SolidWorks etc. However, if you have the possibility to use AutoCAD, you can export your 3D model from
CAD system into AutoCAD via SAT file format (ACIS exchange file format) and then you can try to carry out finite-
element analysis of your model using AutoFEM.

20
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 21

5. Tips&Tricks

Requirements for Solid 3D Model for Finite Element Analysis

The quality and possibility of constructing a finite element mesh is strongly dependent on the quality of
volume models, so when building 3D models imposed more stringent requirements than conventional
modeling in AutoCAD. You should consider the following requirements to create three-dimensional models
of your products in terms of the finite element analysis.
Mutual or self-intersection bodies are not allowed. It is impossible to construct a finite element mesh for
intersecting bodies. Before you create a study you always should test your model on the intersections
by special AutoCAD command INTERFERE. This command shows intersections between bodies if they
are. One advice is how intersections may be removed from the assembly if intersecting bodies consist
of the same material. You can use the command of AutoCAD: UNION and unite intersecting bodies in a
whole body.

Using the AutoCAD's command INTERFERE for checking the model on entersections.

21
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 22

Correct 3D model has no intersections betw een its parts. The finite element mesh may be constructed.
Between the bodies must be no gap, except when there are no actual gaps between the bodies. All
bodies, which are included in a study, must have a contact by a face, or edge, or vertex, with any other
body of the study. So in the study, a totally unengaged body should not exist as it is like freely
“hovering” in space.

Model w ith gap betw een its parts. Mesh may be constructed in some cases, but calculation can be incorrect or
impossible.
3D body should be closed volume. Finite element mesh can be constructed only for a limited volume.
In AutoCAD one can create a solid 3D model which consists of multiple separate volumes. For instance
if you have extruded multiple profile (see at the picture). Meshing of the such 3D body is impossible. So
the 3D solid which consists of multiple separate volumes is not allowed in the FEA study. If you have
such 3D solid you need use the AutoCAD's command SOLIDEDIT|SEPARATE before creating the FEA
study to separate the single solid on multiple independent volumes.

22
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 23

The 3D solid consists of multiple volumes.

That solid after using SOLIDEDIT|SEPARATE command.

It is recommended to avoid to do rounding, chamfering, holes and decorative elements, which are not
important for the strength of design. They can complicate the construction of the finite element grid and
increase the dimension of the problem (time to find a solution). But items which are bearing influence on
strength of design, e.g., fillets, ribs, etc., must be present in the model.
The bodies, united in a block are treated as one solid body which is obtained using a Boolean union of
all bodies in the block. The bodies in the block may intersect with each other. No gap should exist
between the bodies as this will generate an error of grid generation.

23
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 24

How can I apply a force (or pressure) to a certain area of the part?

Often the loads are applied at some area of the part which you want to study. Use the AutoCAD's command
IMPRINT to create an area of load applying on the facet of the 3D model. Firstly (before creating the study!), you
shoud draw the geometry, which describes the area of loading, using AutoCAD's drawing commands. Then use
IMPRINT to create a new facet on the existing face of the 3D model. See the screen-shots, illustrating these steps,
below.

Drawing the contour of load aplying

Use the command IMPRINT

24
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 25

Selecting the body

Selecting the contour

25
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 26

Deleting the contour

Creating the Study and applying the force

26
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 27

6. How to buy AutoFEM Analysis?


There are two main ways to pay for the commercial version and get the licence key.

Way One. You can use services of registration companies RegNow (it is convenient for USA and other
countries worldwide) or ShareIt! (it is most comfortable for European users). The major advantages of
buying the licence via RegNow or ShareIt! :
Variety of payment options. These companies accept different kinds of electronic payments, bank
cards as well as non-cash bank transfers. They also offer the buyer all necessary accounting
documents (invoices, etc.), if you need them.
Fixed value. RegNow and ShareIt! provide licen?es for AutoFEM Analysis at the same cost which
is stated on our website. If you need a non-standard set of modules which is not available on the
registrar’s website, please write sales@autofem.com, and we will accept it as individual order.
Rate of purchase. If you pay via electronic transfer (e.g., PayPal) or from the credit card, then, as a
rule, the license key will be given to you by an email as soon as in few minutes after the payment is
made.
Security. The purchase via RegNow or ShareIt! is the safest way of obtaining the licence for
AutoFEM Analysis, as you pay money to the mediator, who can be an independent arbitrator and, thus,
guarantee that you necessarily get the licence key with the configuration you have ordered.

Way Two. You can pay the value of the licence directly to the account of our company (AutoFEM
Software LLP). You only need to request it via email sales@autofem.com, and we will post you the bill.
The order must state:

Name and registered address of your company;


Name of the company leader;
Name and contacts of a person who will solve technical problems;
Strict configuration (set) of modules which you wish to buy and their number; and
What additional accounting documentation you need.

After you pay our bill, we will send you the serial number and necessary documents.

27
AutoFEM Software LLP http://autofem.com
Installation Guide for AutoFEM Analysis Lite (English) 28

Installationsanleitung
für AutoFEM Analysis Lite (deutsch)

Version 3.x

© 2018 AutoFEM Softw are LLP

28
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 29

1. Installation von AutoFEM

1.1 Anforderungen an Software


AutoFEM ist ein Plugin für das AutoCAD System der automatischen Entwurf für das Betriebssystem
Windows XP/Vista/7/8/10 64-bit.
AutoFEM 3.x arbeitet mit den AutoCAD (x64) - Versionen 2010, 2012, 2013, 2014, 2015, 2016,
2017, 2018, 2019.
AutoFEM 3.x funktioniert nicht mit den AutoCAD Versionen für MAC OS. AutoFEM 3.x nicht funktioniert
mit AutoCAD 2011 (x86, x64).

1.2 Entpacken des Installationspakets


Entpacken Sie autofem-x64.zip. Stellen Sie sicher, dass Sie die Verteilungsgerechtigkeit Paket mit der
gleichen Kapazität, wie Ihre installierte AutoCAD Version (x64), entpackt. Das Installationspaket enthält
die folgenden Ordner und Dateien:

Dateien von AutoFEM Verteilungsgerechtigkeit Paket für x64

Der Ordner x64 enthält Microsoft-Servicedateien, die für die Arbeit von Softwareprogrammen in der
Windows-Umgebung notwendig sind.
Für AutoFEM Analysis 3.x muss die Datei aus dem Ordner redist2017 im System installiert sein.
Für die AutoCAD-Versionen 2010 und 2012 muss die Datei aus dem Ordner redist2008 im System
installiert sein.
Für die AutoCAD-Versionen 2013 und 2014 muss die Datei aus dem Ordner redist2010 im System
installiert sein.
Für die AutoCAD-Versionen 2015 und 2016 muss die Datei aus dem Ordner redist2012 im System
installiert sein (normalerweise wird die redists2012 mit AutoCAD 2015/2016 installiert).
Für die AutoCAD-Versionen 2017 und 2018 muss die Datei aus dem Ordner redist2015 im System
installiert sein (normalerweise wird die redists2015 mit AutoCAD 2017/2018 installiert).
Für AutoCAD Version 2019 muss die Datei aus dem Ordner redist2017 im System installiert sein
(normalerweise wird die redists2017 mit AutoCAD 2019 installiert).
Diese Dateien können auch von der offiziellen Webseite von Microsoft Corporation heruntergeladen
werden.

29
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 30

1.3 Die Installation der Software (des Clients Teil)


Für eine erfolgreiche Installation, müssen Sie das Recht haben, Software-Programmen auf Ihrem
Computer zu installieren. Aktivieren Sie die Datei "Setup-x64.exe" (Setup-x86.exe). Wählen Sie die
Sprache für den Assistenten im Dialog, der angezeigt wird, und drücken Sie OK. Dann werden Sie
durch den Assistenten geführt.

Auswählen einer Sprache für die Installation

Installieren der verteilbaren Pakete von Microsoft Visual Studio.

30
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 31

Installation von AutoFEM - Schritt 2

Installation von AutoFEM - Schritt 3

31
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 32

Installation von AutoFEM - Schritt 4

Installation von AutoFEM - Schritt 5

32
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 33

Installation von AutoFEM - Schritt 6

1.4 Registrierung von AutoFEM in der installierten AutoCAD-


Version
Nach der erfolgreichen Installation von AutoFEM Analysis startet AutoFEM Launcher, der einfachen
Zugriff auf AutoFEM-Begleitmaterialien (wie Hilfe, Tutorials, Überprüfungen), AutoFEM-Einstellungen und
ermöglicht AutoFEM mit der gewünschten AutoCAD-Version zu starten. Wenn Sie die AutoFEM-Analyse
sofort starten möchten, klicken Sie doppelt auf die gewünschte AutoCAD-Schaltfläche oder drücken Sie
die Schaltfläche "Starten Sie AutoCAD...". Auch der Launcher-Dialog erlaubt es jedem, die Verbindung
mit dem Server der Lizenzverifikation einzustellen (siehe 3.4.2). Der Zugriff auf den AutoFEM Launcher
ist jederzeit über das Menü Start und den Ordner AutoFEM Analysis Lite 3.x | AutoFEM Analysis Lite
3.x. möglich.

33
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 34

Registrierung von AutoFEM in AutoCAD

"FEMA Tool" in dem Menü Windows XP/Vista/7


Beachten Sie! Seit AutoCAD 2014 kann man die folgende Meldung
angezeigt, wenn Sie beginnen AutoFEM, die nicht für das
automatische Laden registriert werden:

Klicken Sie auf "Load", w enn Sie w ollen mit AutoFEM arbeiten

1.5 Start von AutoCAD mit installiertem AutoFEM


Nach erfolgreicher Installation des Systems und seiner Registrierung in AutoCAD, aktivieren Sie
AutoCAD, um mit AutoFEM arbeiten zu können. Beim ersten Starten wird der Dialog erscheinen, der

34
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 35

den Modus der Demo aktiviert und die Verwendung mit der Dauer von 15 Tagen oder die Lizenz zu
aktivieren erlaubt. (Einzelheiten der Aktivierung einer lokalen Lizenz siehe 2.1)

Dialog im Erstlauf von AutoCAD nach der Installation von AutoFEM


Beachten Sie.
In einigen Fällen, für die Leiste mit AutoFEM Befehle, ist es notwendig, den 3D Arbeitsplatz von
AutoCAD zurückzusetzen. Um dies zu tun, verwenden Sie den AutoCAD-Befehl "WSCURRENT"
mit der Option "3D-Modellierung".
Im Fenster, das AutoCAD öffnet, muss die Leiste mit Befehlen AutoFEM erscheinen, wie es in der
Abbildung dargestellt ist. Der Zugang zu den AutoFEM Befehlen gibt es auch aus dem jeweiligen Menü
von AutoCAD.

35
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 36

AutoFEM Befehle im Menü und AutoCAD Leiste

36
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 37

3D-Arbeitsbereich von AutoCAD Zurücksetzen

37
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 38

1.6 Anpassen der Spracheinstellungen


AutoFEM-Analyse ist eine mehrsprachige Anwendung. Der Benutzer kann die Software in einer von fünf
europäischen Sprachen starten: Englisch, Deutsch, Französisch, Italienisch oder Spanisch.
Standardmäßig verwendet das System die Sprache von AutoCAD, in der es gestartet wird. Wenn AutoFEM keine
solche Sprachschnittstelle besitzt (z. B. Türkisch), wird die englische Version verwendet. Der Benutzer kann die
Sprache der AutoFEM-Oberfläche auswählen und einstellen, indem er die Combo-Box "Sprache wechseln" drückt
oder eine gewünschte Sprache auf der Registerkarte "AutoFEM-Einstellungen" auswählt. Die ausgewählte Sprache
wird für alle verfügbaren AutoCAD-Versionen zugewiesen. Es ist möglich, mehrere Instanzen von AutoCAD /
AutoFEM mit unterschiedlicher Sprachschnittstelle gleichzeitig zu starten, AutoCAD / AutoFEM auszuführen, dann
die Spracheinstellungen zu ändern und die nächste AutoCAD / AutoFEM-Instanz auszuführen.

Spracheinstellungen

38
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 39

2. Deinstallation von AutoFEM Lite


Für die Deinstallation von AutoFEM wird empfohlen, rufen Sie "Deinstalllation von AutoFEM" aus dem
Ordner AutoFEM 3.x im Startmenü auf oder benutzen Sie den entsprechenden Befehl im Abschnitt
Installieren/Deinstallieren von Programmen in der Systemsteuerung von Windows.

Abrufen der AutoFEM Deinstallationsbefehls aus dem Menü


Start | AutoFEM Analysis 3.x in der Windows XP/Vista/7 Umgebung

Das System wird entfernt.

39
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 40

3. AutoFEM Lite Einschränkungen


Einige Studien sind nicht für AutoFEM Analysis Lite wie folgt verfügbar:

Verfügbare (aktiviert) und nicht verfügbare (deaktivierte) Studien


Einschränkung für alle Studien:
Nur ein einziger Körper oder Oberflächenkörper kann für eine Studie ausgewählt werden.
Es gibt eine begrenzte Anzahl von Modelleinheiten zum Anwenden von Lasten / Einschränkungen.

Einschränkungen der Randbedingungen für statische, Knick- und dynamische Analyse sind wie folgt:
Es gibt nur zwei Arten von mechanischen Belastungen für mechanische Studien: Kraft und Druck.

40
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 41

Verfügbare Lasten sind im Menü aktiviert


Sie können nur vollständige Einschränkung (unbewegliche Fixierung) verwenden.

Verfügbare Beschränkungen sind im Menü aktiviert

Einschränkungen der Häufigkeitsanalyse sind wie folgt:


Sie können nur vier niedrigere Eigenfrequenzen finden.
Auf das Design angewendete Kräfte werden nicht in die Berechnung einbezogen.
Sie haben keine Möglichkeit, nicht festes (räumlich freies) System zu lösen.

Einschränkungen der erzwungenen harmonischen Oszillationsanalyse (Harmonic Response) sind wie


folgt:
Sie haben zwei Arten von mechanischen Lasten für jede Studie (Kraft und Druck).
Sie können den Mechanical Oscillator nicht als Oszillationsquelle verwenden.

Einschränkungen der thermischen Analyse (stationärer Zustand) sind:


Sie können nur drei Randbedingungen für die thermische Analyse verwenden: Temperatur, Wärmeleistung und
Konvektion.

41
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 42

Die verfügbaren thermischen Randbedingungen sind im Menü aktiviert

Es gibt keine weiteren Einschränkungen hinsichtlich der Anzahl der Freiheitsgrade, der Berichte, der
Studienkontrollen, der Zeitbegrenzung usw.
Sie haben ein voll funktionsfähiges FEA-Instrument für Ihre Zwecke.

42
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 43

3. Häufig gestellte Fragen

Wo bekomme ich die Unterstützung über AutoFEM?

Wenn Sie Schwierigkeiten bei der Installation oder Verwendung AutoFEM begegnen, ist der beste Weg,
um zu versuchen, sie zu lösen, um direkt zu unserem technischen Support per E-Mail:
support@autofem.com. Bitte, klar in der Beschreibung Ihres Problems und uns die Version von
Windows, AutoCAD und AutoFEM, dass Sie verwenden. Wir empfehlen Ihnen dringend, sofort mit uns
Verbindung treten, anstatt die Suche mit Google alle Fragen bezüglich der Installation und AutoFEM usw.
Es ist effektiver und gibt die Ergebnisse an.

Empfohlene Computer-Parameter für eine effiziente (Berufs-) Arbeit mit AutoFEM

Mathematics Modellierung von physikalischen Phänomenen gehört zu der Klasse der


ressourcenintensiven Probleme, die ernsthafte Rechenressourcen erfordern. Aus diesem
Grund wird empfohlen, für die effiziente Nutzung des Finite-Elemente-Modellierungssystems
die leistungsstärksten Computer zu verwenden, auf die der Benutzer zugreifen kann.

Technische Voraussetzungen für eine effektive (professionelle) Arbeit mit


AutoFEM
Prozessor Mit 64-bit Unterstützung, Intel i7, i5, Xeon etc
Festplattenspeicher (für die 80 GB und mehr
Speicherung von
Berechnungsergebnisse)
RAM 8 GB min, 32 GB empfohlen
Betriebssystem Windows 64-bit (Windows XP, Windows Vista,
Windows 7)
Software AutoCAD x64, AutoFEM x64

Welche Versionen von AutoCAD funktioniert AutoFEM 3.x?

Das System von Finite-Elemente-Analyse "AutoFEM 3.x" arbeitet mit AutoCAD x64 2010, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019 für Windows-basierte Betriebssysteme auf 64-bit-Plattform.

Funktioniert AutoFEM mit AutoCAD 2011?


Nein, tut es nicht. Nur AutoCAD 2010, 2012-2019 werden voll unterstützt.

Wird AutoFEM Lite mit AutoCAD Lite arbeiten?

Nein, tut es nicht. AutoFEM und AutoFEM Lite kann nur mit der Vollversion von AutoCAD verwendet
werden, da die 3D-Modellierung Arbeitsplatz ist notwendig für die Finite-Elemente-Analyse.

43
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 44

Ich bin mit einem anderen CAD-System (Inventor, Mechanical Desktop, Solidworks)
arbeiten. Kann ich verwenden AutoFEM?

AutoFEM funktioniert nur in 3D-Umgebung von AutoCAD, es arbeitet nicht direkt mit Inventor, Mechanical
Desktop, SolidWorks etc. Allerdings können Sie Ihr 3D-Modell aus CAD-System AutoCAD exportieren in
über SAT-Datei-Format (ACIS Austausch Dateiformat) und dann können Sie versuchen zur
Durchführung von Finite-Elemente-Analyse des Modells mit AutoFEM.

44
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 45

4. Tips & Tricks

Anforderungen an das 3D-Modell für die Finite-Elemente-Analyse

Die Qualität und die Möglichkeit des Baus eines Finite-Elemente-Netzes ist stark abhängig von der
Qualität der Modelle, so gibt es beim beim Bau von 3D-Modellen strengere Anforderungen als bei der
herkömmlichen Modellierung in AutoCAD. Sie sollten die folgenden Anforderungen beachten, um
dreidimensionale Modelle Ihrer Produkte mit dem Ziel der Finite-Elemente-Analyse erstellen.
Gegenseitige oder Selbst-Kreuzungen von Körpern sind nicht erlaubt. Es ist unmöglich ein Finite-
Elemente-Netz von sich schneidenden Körper zu konstruieren. Bevor Sie eine Studie erstellen sollten
Sie immer Ihr Modell auf Schnittstellen testen, indem Sie die spezielle AutoCAD-Funktion _INTERFERE
nutzen. Dieser Befehl zeigt Schnittstellen zwischen Körper. Ein Rat, wie Schnittpunkte entfernen
können, wenn sich schneidenden Körper aus dem gleichen Material bestehen: Sie können mit dem
Befehl von AutoCAD: _UNION die sich kreuzenden Stellen eines ganzen Körper verbinden.

Mit dem AutoCAD-Befehl INTERFERE kann das Modell Überprüft w erden. Es gibt viele
Überschneidungen. Die Erstellung einer Finite-Element-Studie ist unmöglich.

45
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 46

Ein korrektes 3D-Modell hat keine Schnittpunkte zw ischen seiner Teile. Das Finite-Elemente-Netz kann
aufgebaut w erden.
Zwischen den Körpern darf kein Spalt sein, es sei denn, es gibt keine tatsächliche Lücken zwischen den Körpern.
Alle Körper, die in einer Studie enthalten sind, müssen einen Kontakt durch eine Fläche, Kante oder Ecke mit
einem anderen Körper der Studie haben. So sollte in der Studie kein völlig "frei schwebender" Körper im Raum
existieren.

Ein Modell mit Spalt zw ischen seinen Teilen. Das Netz kann in einigen Fällen generiert, aber die Berechnung
kann falsch sein oder nicht durchgeführt w erden.
3D-Körper muss ein geschlossenes Volumen sein. Das Finite-Elemente-Netz kann nur für ein begrenztes Volumen
gebaut werden.
In AutoCAD kann man ein 3D-Modell, das aus mehreren Volumen besteht erstellen. Zum Beispiel, wenn
Sie mehrere extrudierte Profile (siehe Bild) haben. Die Vernetzung dieser 3D-Körper ist unmöglich und
darum ist das 3D-Model, da es aus mehreren getrennten Teilen besteht, nicht in die FEA Studie erlaubt.
Wenn Sie ein solches 3D-Modell haben, machen Sie Gebrauch des AutoCAD-Befehls SOLIDEDIT|

46
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 47

SEPARATE vor der Erstellung der FEA-Studie, um das einzige Objekt auf mehreren unabhängige
Volumen zu trennen.

Die 3D-Objekt besteht aus mehreren Volumen. Ansicht nach Verw endung des Befehls SOLIDEDIT|SEPARATE

Es wird empfohlen, Rundungen, Löcher und dekorative Elemente, die nichts mit der Stärke des Design zu tun
haben zu vermeiden. Sie können den Bau des Finite-Elemente-Netzes erschweren und erhöhen die Dimension des
Problems (erhöhte Berechnungszeit). Aber Teile, die Einfluss auf die Stärke der Konstruktion haben, müssen
unbedingt im Modell vorhanden sein.
Die in einem Block vereinten Körper werden als solides Objekt, welches unter Verwendung eines
Booleanischen Verbindung aller Stellen in einen Block behandelt wird. Die Körper in dem Block können
sich untereinander schneiden. Darf jedoch kein Spalt zwischen den Körpern bestehen, da dies einen
Fehler in der Netz-Generierung erzeugen.

Wie kann ich eine Kraft (oder Druck) auf einen bestimmten Bereich des Teils?

Oft werden die Lasten an einem gewissen Bereich des Teils aufgebracht. Verwenden Sie den AutoCAD-Befehl
IMPRINT, um einen Bereich der Anwendung der Last auf der Facette des 3D-Modells zu erstellen. Erstens (vor der
Erstellung der Studie!), Müssen Sie ziehen die Geometrie der Fläche des Ladens, mit AutoCAD-Zeichnung
Befehle. Dann nutzen Sie IMPRINT, um eine neue Facette auf der bestehenden Fläche des 3D-Modell zu erstellen.
Siehe die Screen-Shots, veranschaulicht diese Schritte, unten.

47
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 48

Zeichnen Sie die Kontur Lastbeaufschlagungsblock

Verwenden Sie den Befehl _IMPRINT

48
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 49

Wählen Sie den Körper

Wählen Sie die Kontur

49
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 50

Löschen Sie die Kontur

Erstellen Sie die Studie und wenden Sie die Kraft

50
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 51

5. Wie kann ich AutoFEM Analysis kaufen?

Es gibt zwei Arten, die kommerzielle Version zu bezahlen und den Lizenzschlüssel zu bekommen.

Erste Weise. Sie können sich an die registrierenden Firmen RegNow (passend für die USA und andere
Länder in der ganzen Welt) oder ShareIt! (mehr passend für europäische Anwender) wenden. Die
Hauptvorteile des Kaufes der Lizenz per RegNow oder ShareIt! sind folgende:
Beliebige Bezahlungweise. Diese Firmen nehmen verschiedene Arten der elektronischen
Zahlungen, Kreditkarten sowie bargeldlose Bankanweisungen an. Sie gewähren auch dem Kunden
alle notwendigen Buchhaltungsunterlagen (Invoice usw.).
Fixierter Preis. RegNow und ShareIt! liefern die Lizenzen AutoFEM Analysis mit demselben Preis,
der auf unserer Homepage angegeben ist. Wenn Sie einen ungewöhnlichen Satz von Modulen
benötigen, den es auf den Homepages der registrierenden Firmen nicht gibt, schreiben Sie bitte uns
an die Adresse sales@autofem.com, Diese E-Mail-Adresse ist gegen Spambots geschützt! Sie
müssen JavaScript aktivieren, damit Sie sie sehen es können. Wir werden die individuelle Bestellung
für Sie vornehmen.
Schneller Kauf. Wenn Sie elektronische Zahlungsmittelüberweisung tätigen (z.B. PayPal) oder mit
Kreditkarte bezahlen, bekommt man in der Regel den Lizenzschlüssel per E-Mail in einigen Minuten
nach der Bezahlung.
Sicherheit. Der Kauf mit RegNow oder ShareIt! ist die sicherste Weise der AutoFEM Analysis
Lizenzerwerbung, weil Sie das Geld dem Vermittler zahlen, der als unabhängiger Schiedsrichter
auftreten kann, und garantiert auf diese Art, dass Sie den Lizenzschlüssel in der von Ihnen bestellten
Konfiguration bekommen.

Zweite Weise. Sie können die Lizenz direkt bei uns kaufen (AutoFEM Software LLP). Dazu brauchen
wir die Anfrage per E-Mail an sales@autofem.com Diese E-Mail-Adresse ist gegen Spambots
geschützt! Sie müssen JavaScript aktivieren, damit Sie sie sehen können. Darauf folgend werden wir
eine Rechnung für Sie stellen. Sie müssen in der Bestellung das Folgende angeben:
den Namen und den Sitz Ihrer Firma;
den Namen des Leiters;
den Namen und Kontaktangaben der Person, die für technische Fragen verantwortlich ist;
die genaue Konfiguration (den Satz) der Module, die Sie kaufen möchten und ihre Anzahl;
welche Buchhaltungsunterlagen Sie benötigen.

Nach der Bezahlung der Rechnung werden wir Ihnen den Lizenzschlüssel und die notwendigen
Unterlagen zusenden.

51
AutoFEM Software LLP http://autofem.com
Installationsanleitung für AutoFEM Analysis Lite (deutsch) 52

Guide d'installation
pour AutoFEM Lite (français)

Version 3.x

© 2018 AutoFEM Softw are LLP

52
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 53

1. Installation de AutoFEM

1.1 Exigences au logiciel


AutoFEM est un plugin pour AutoCAD pour le système d'exploitation Windows XP/Vista/7/8/10 64 bit.
AutoFEM Analysis 3.x est compatible avec les versions d'AutoCAD (x64) 2010, 2012, 2013, 2014,
2015, 2016, 2017, 2018, 2019.
AutoFEM Analysis 3.x ne fonctionne pas avec les versions d'AutoCAD pour Mac OS. AutoFEM 3.x ne
fonctionne pas avec AutoCAD 2011 (x86, x64).

1.2 Ouverture du paquet d'installation


Décompressez le package d'installation "autofem-x64.zip". Assurez-vous que vous avez AutoCAD de la
capacité de bits nécessaire - x64. Le package d'installation contient les dossiers et fichiers suivants:

Fichiers du paquet de distribution d'AutoFEM pour x64

Le dossier x64 contient des fichiers de service Microsoft, nécessaires au travail des logiciels dans
l'environnement Windows.
Pour AutoFEM Analysis 3.x, le fichier du dossier redist2017 doit être installé dans le système.
Pour les versions AutoCAD 2010 et 2012, le fichier du dossier redist2008 doit être installé dans
le système.
Pour les versions 2013 et 2014 d'AutoCAD, le fichier du dossier redist2010 doit être installé
dans le système.
Pour les versions 2015 et 2016 d'AutoCAD, le fichier du dossier redist2012 doit être installé
dans le système (normalement, redists2012 est installé avec AutoCAD 2015/2016).
Pour les versions 2017 et 2018 d'AutoCAD, le fichier du dossier redist2015 doit être installé
dans le système (normalement, redists2015 est en cours d'installation avec AutoCAD 2017/2018).
Pour la version 2019 d'AutoCAD, le fichier du dossier redist2017 doit être installé dans le
système (normalement, redists2017 est en cours d'installation avec AutoCAD 2019).
Ces fichiers peuvent également être téléchargés à partir du site officiel de Microsoft Corporation.

1.3 Installation du logiciel (de la part du client)


Pour que l'installation soit un succès, vous devez avoir le droit d'installer des logiciels sur votre
ordinateur. Ouvrez le fichier "Setup-x64.exe". Sélectionnez la langue de travail de l'assistant dans la
boîte de dialogue qui s'affiche et appuyez sur OK. Ensuite, effectuez les options de l'assistant.

53
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 54

Sélection de la langue pour l'installation

Installation des paquetages redistribuables de Microsoft Visual Studio

54
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 55

Installation de AutoFEM - Etape 2

Installation de AutoFEM - Etape 3

55
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 56

Installation de AutoFEM - Etape 4

Installation de AutoFEM - Etape 5

56
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 57

Installation de AutoFEM - Etape 6

Installation de AutoFEM - dernière étape

1.4 Enregistrement d'AutoFEM dans la version installée d'AutoCAD


Après avoir installé AutoFEM Analysis, AutoFEM Launcher démarre, ce qui permet d'accéder facilement
aux documents d'accompagnement AutoFEM (tels que Help, Tutorials, Verifications), les paramètres
AutoFEM et permet de lancer AutoFEM avec la version AutoCAD souhaitée. Si vous voulez démarrer
immédiatement AutoFEM Analysis, double-cliquez sur le bouton AutoCAD souhaité ou appuyez sur le
bouton "Lancer AutoCAD ...". La boîte de dialogue Lanceur permet également à quiconque d'ajuster la

57
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 58

connexion avec le serveur de vérification de licence (voir 3.4.2). L'accès à AutoFEM Launcher est
disponible à tout moment depuis le menu Démarrer et le dossier AutoFEM Analyse Lite 3.x |
AutoFEM Analysis Lite 3.x.

Dialogue d'enregistrement de AutoFEM dans AutoCAD

Ouverture de Fema Tool à partir du menu Windows XP/Vista/7


Remarque! Depuis AutoCAD 2014, vous pouvez voir la fenêtre de
message suivant lorsque vous commencez AutoFEM qui n'est pas
inscrit à chargement automatique:

Cliquez sur "Load" si vous voulez travailler avec AutoFEM

58
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 59

1.5 Lancement d'AutoCAD avec l'analyse de AutoFEM installée


Après l'installation du système et de son inscription dans AutoCAD, AutoCAD activez la version afin de
commencer à travailler avec AutoFEM. Lors de la première ouverture, la boîte de dialogue apparaîtra,
offrant à activer le mode d'utilisation de la démo avec la durée de 15 jours ou de activer la licence. (Pour
plus de détails sur l'activation d'une licence locale, voir 2.1)

Dialogue à l'exécution initiale d'AutoCAD après l'installation d'AutoFEM

Remarque.
Dans certains cas, pour que la barre avec les commandes d'AutoFEM apparaisse, il est nécessaire
de réinitialiser manuellement l'espace de travail 3D d'AutoCAD. Pour cela, utilisez la commande
AutoCAD "WSCURRENT" avec l'option "Modélisation 3D".
Dans la fenêtre AutoCAD qui s'ouvrira, la barre avec les commandes d'AutoFEM doit apparaître, comme
il est montré dans la figure. L'accès aux commandes d'AutoFEM est également disponible dans le menu
respectif d'AutoCAD.

59
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 60

Commandes d'AutoFEM dans le menu et la barre AutoCAD

60
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 61

Réinitialisation de l'espace de travail 3D de AutoCAD

61
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 62

1.6 Ajustement des paramètres de langue


AutoFEM Analysis est une application multilingue. L'utilisateur peut lancer le logiciel dans l'une des cinq langues
européennes: anglais, allemand, français, italien ou espagnol.
Par défaut, le système utilise la langue d'AutoCAD dans laquelle il est lancé. Si AutoFEM n'a pas une telle interface
de langue (par exemple, turc), la version anglaise est utilisée. L'utilisateur peut sélectionner et définir la langue de
l'interface AutoFEM en appuyant sur la combo-box "Changer de langue" ou en sélectionnant une langue désirée
dans l'onglet "Paramètres AutoFEM". La langue sélectionnée est affectée à toutes les versions d'AutoCAD
disponibles. Il est possible de lancer plusieurs instances d'AutoCAD / AutoFEM avec différentes interfaces de
langues simultanément, en exécutant AutoCAD / AutoFEM, puis en modifiant les paramètres de langue et en
exécutant la prochaine instance d'AutoCAD / AutoFEM.

Ajustement des paramètres de langue

62
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 63

4. La désinstallation d'AutoFEM
La désinstallation d'AutoFEM est recommandée dans l'ordre suivant. Récupérer la commande
deinstalllation de AutoFEM du dossier AutoFEM 3.x d'analyse dans le menu Démarrer ou utiliser la
commande correspondante dans la section Installer / désinstaller des programmes sur le Panneau de
configuration de Windows.

Récupération de la commande de désinstallation AutoFEM dans le menu


Start | AutoFEM Analysis 3.x dans le Windows XP/Vista/7
Le système sera supprimé.

63
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 64

3. AutoFEM Lite limitations


Certaines études ne sont pas disponibles pour AutoFEM Analysis Lite, comme illustré ci-dessous:

Études disponibles (activées) et indisponibles (désactivées)


Limitation pour toutes les études:
Un seul corps solide ou de surface peut être sélectionné pour une étude.
Il y a un nombre limité d'entités de modèle pour appliquer des charges / restrictions.

Les limites des conditions aux limites pour l'analyse statique, flambement et dynamique sont les
suivantes:
Il n'y a que deux types de charges mécaniques pour l'étude mécanique: la force et la pression.

64
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 65

Les charges disponibles sont activées dans le menu


Vous ne pouvez utiliser que la restriction complète (fixation inamovible).

Les restrictions disponibles sont activées dans le menu

Les limites de l'analyse de fréquence sont les suivantes:


Vous pouvez trouver seulement quatre fréquences naturelles inférieures.
Les forces appliquées à la conception ne sont pas incluses dans le calcul.
Vous n'avez aucune possibilité de résoudre un système non fixé (spatialement libre).

Les limites de l'analyse d'oscillation harmonique forcée (réponse harmonique) sont les suivantes:
Vous avez deux types de charges mécaniques pour toute étude (force et pression).
Vous ne pouvez pas utiliser l'oscillateur mécanique comme source d'oscillations.

Les limites de l'analyse thermique (état stationnaire) sont:


Vous pouvez utiliser uniquement trois conditions aux limites pour l'analyse thermique: température, puissance
thermique et convection.

65
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 66

Les conditions limites thermiques disponibles sont activées dans le menu

Il n'y a pas d'autres limitations concernant le nombre de degrés de liberté, les rapports, les contrôles d'étude, la
limitation de temps, etc.
Vous avez un instrument FEA entièrement fonctionnel pour vos besoins.

66
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 67

5. Questions fréquentes

Où puis-je obtenir le soutien technique concernant AutoFEM?

Si vous rencontrez des difficultés à l'installation ou l'utilisation d'AutoFEM, la meilleure façon est d'écrire directement
à notre support technique: support@autofem.com. S'il vous plaît soyez clair dans la description de votre problème et
dites nous la version de Windows, AutoCAD et AutoFEM que vous utilisez. Nous vous recommandons vivement de
nous contacter immédiatement au lieu de chercher avec Google. C'est plus efficace et donne de meilleurs résultats.

Paramètres informatiques recommandés pour le travail efficace (professionnel) avec


AutoFEM

La modélisation mathématique des phénomènes physiques appartient à la classe des problèmes


gourmands en ressources qui nécessitent de sérieuses ressources de calcul. C'est pourquoi, pour une
utilisation efficace du système de modélisation par éléments finis, il est recommandé d'utiliser les
ordinateurs les plus puissants accessibles à l'utilisateur.

Éxigences techniques pour un travail efficace (professionnel) avec AutoFEM


Processor avec soutien de instructions 64-bits , Intel i5, i7, Xeon series
RAM 8 GB min, 32 GB recomended
Operating system Windows XP/7/8 64-bit
Software AutoCAD x64, AutoFEM x64

Avec quelles versions d'AutoCAD AutoFEM Analyse 3.x fonctionne?

Le système d'analyse d'éléments finis "AutoFEM Analyse" fonctionne avec AutoCAD 64-bit 2010, 2012, 2013, 2014,
2015, 2016, 2017, 2018, 2019 pour les systèmes d'exploitation basés sur la plate-forme Windows 64-bit.

Est-ce que AutoFEM fonctionne avec AutoCAD 2011?

Non, elle n'existe pas. Il y a quelques problèmes de compatibilité avec AutoCAD 2011. Par conséquent, l'analyse
AutoFEM ne fonctionne pas avec AutoCAD 2011 x86/x64. Seulement AutoCAD x64 2010, 2012-2019 sont
entièrement pris en charge.

Est-ce que AutoFEM Analyse ou AutoFEM Analyse Lite fonctionne avec AutoCAD Lite?

Non, elle n'existe pas.


AutoFEM Analyse et AutoFEM Analyse Lite peut être utilisé uniquement avec la version complète du logiciel
AutoCAD, car l'espace de travail Modélisation 3D est nécessaire pour analyse par d'éléments finis.

Je travaille avec un autre système de CAO (Inventor, Mechanical Desktop, Solidworks).


Puis-je utiliser AutoFEM?

AutoFEM analyse fonctionne uniquement dans l'environnement 3D d'AutoCAD. Il ne fonctionne pas directement avec

67
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 68

Inventor, Mechanical Desktop, SolidWorks, etc. Toutefois, si vous avez la possibilité d'utiliser AutoCAD, vous pouvez
exporter votre modèle 3D du système CAO dans AutoCAD via le format de fichier .SAT (format d'échange de fichiers
ACIS) et après vous pouvez effectuer l'analyse d'éléments finis de votre modèle en utilisant AutoFEM.

68
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 69

5. Trucs et astuces

Exigences au modèle 3D pour l'analyse des éléments finis

La qualité et la possibilité de construire un maillage d'éléments finis est fortement dépendante de la


qualité des modèles, de sorte que lors de la construction des modèles 3D des exigences plus strictes
sont imposée que dans la modélisation classique avec AutoCAD. Vous devez tenir compte des exigences
suivantes pour créer des modèles tridimensionnels de vos produits avec le but de l'analyse des éléments
finis.
Corps avec intersection mutuels ne sont pas autorisés. Il est impossible de construire un maillage
d'éléments finis pour des corps qui ont des intersections. Avant de créer une étude, vous devriez
toujours tester votre modèle sur les intersections par la commande spéciale d'AutoCAD _INTERFERE.
Cette commande affiche les intersections entre les corps si elles existent. Un conseil est de savoir
comment les intersections peuvent être effacées si les corps se croisant sont constitués du même
matériel. Vous pouvez utiliser la commande d'AutoCAD: _UNION et unir les corps qui se croisent en un
corps entier.

Utilisez la commande d'AutoCAD INTERFERE pour vérifier le modèle. Il y a beaucoup


d'intersections. La création d'une étude d'éléments finis est impossible

69
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 70

Un modèle 3D correct n'a pas d'intersections entre ses parties. Le maillage d'éléments finis peut être
construit.
Il ne doit pas avoir d'espaces entre les corps. Tous les corps qui sont inclus dans l'étude doivent avoir un contact
par une face, arête ou un vertex avec tout autre corps de l'étude. Ainsi, dans l'étude, un corps totalement librement
"planant" dans l'espace ne devrait pas exister.

Modèle avec écart entre ses parties. Le Maillage peut être construit dans certains cas, mais le calcul peut être
incorrect ou impossible.
Corps 3D doit être volume clos. Le maillage d'éléments finis peut être construite seulement pour un volume limité.
Dans AutoCAD, on peut créer un modèle 3D solide qui se compose de plusieurs volumes distincts. Par
exemple, si vous avez un profil multiple extrudé (voir la photo) un maillage du corps 3D est impossible.
Ainsi, le solide 3D qui se compose de plusieurs volumes distincts n'est pas autorisée dans l'étude FEA.
Si vous avez un tel solide 3D, vous devez utiliser la commande AutoCAD SOLIDEDIT|SEPARATE avant
la création de l'étude FEA pour séparer le solide unique sur plusieurs volumes indépendants.

70
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 71

That solid after using SOLIDEDIT|SEPARATE command.

Il est recommandé d'éviter d'inclure des arrondissements, des trous et des éléments décoratifs qui ne sont pas
importants pour la force de conception. Ils peuvent compliquer la construction du maillage d'éléments finis et
augmenter la dimension du problème (et ainsi le temps pour résoudre l'étude). Mais les pièces qui ont influence
sur la force de la conception doivent être présentes dans le modèle.
Les corps, unis dans un bloc sont traités comme un corps solide qui est obtenu à l'aide d'une union
booléenne de tous les objets dans le bloc. Les corps dans le bloc peuvent se croiser les uns avec les
autres. Aucun espace doit exister entre les corps, car cela va générer une erreur de génération du
maillage.

Comment puis-je appliquer une force (ou la pression) à une certaine zone de la partie?

Souvent, les charges sont appliquées à certains domaines d'une partie que vous voulez étudier. Utilisez la
commande IMPRINT d'AutoCAD pour créer une zone d'application de charge sur une face du modèle 3D. Tout
d'abord (avant la création de l'étude!), Vous devez dessiner la géométrie qui décrit la zone de chargement, en
utilisant les commandes de dessin d'AutoCAD. Puis utilisez IMPRINT pour créer une nouvelle face sur la face
actuelle du modèle 3D. Voyez les captures d'écran illustrant les étapes ci-dessous.

71
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 72

Dessin du contour de la zone de charge

Utilisez la commande IMPRINT

72
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 73

Sélectionnez le corps

Sélection du contour

73
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 74

Suppression du contour

Création de l'étude et l'application de la force

7. Comment on peut acheter l’Analysis d’AutoFEM?

Il y a deux moyens principaux de payer la version commerciale et recevoir la clé de licence.

Le premier moyen. Vous pouvez utiliser les services des compagnies d'enregistrements RegNow

74
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 75

(confortable pour les États-Unis et d'autres pays dans le monde entier) ou ShareIt! (plus confortable
pour les utilisateurs européens). Il y a quatre avantages principaux de l'acquisition de la licence par
RegNow ou ShareIt! :

N'importe quelles variantes de paiement. Ces compagnies acceptent divers variantes des paiements
électroniques, les cartes bancaires ainsi que les virements bancaires. Ils accordent aussi à l'acheteur
tous les documents de comptabilité nécessaires (factures etc.), s'il vous en avez besoin.
Le Prix est fix. RegNow et ShareIt! servent la licence de l’Analyse d’AutoFEM au même prix qu'est
indiqué sur notre site. Si vous êtes intéressé à des modules ou des ensembles non-standard absent
sur le site des enregistreurs écrivez nous sur l'adresse sales@autofem.com. (Cette adresse email
est protégée contre les robots de spam, vous devez activer Javascript pour la voir.), et nous vous
préparerons la commande individuelle.
La Vitesse de l'achat. Si vous payez par le virement électronique (par exemple PayPal) ou par la
carte de crédit, en général, la clé de licence vient à vous par e-mail déjà dans les minutes qui suivent
le paiement.
La Sécurité. L'achat par RegNow ou ShareIt! est le moyen le plus sûr de l'acquisition de la licence de
l’Analyse d’ AutoFEM, puisque vous payez l'argent à l'intermédiaire qui fonctionne comme arbitre
indépendant et ainsi garantit que vous recevez absolument la clé de licence dans la configuration
commandée par vous-même.

Le deuxième moyen. Vous pouvez déposer le montant du prix de la licence directement sur le compte
de notre compagnie (AutoFEM Software LLP). Pour cela vous devez nous fair une demande d offre à l'e-
mail support@autofem.com et nous présentons une facture pour le paiement. Dans la commande il est
nécessaire d'indiquer :

Le nom et le domicile de votre compagnie;


Nom du chef de la compagnie;
Nom et coordonnées de la personne résponsable des questions techniques.
La configuration (ensemble) exacte des modules que vous voulez acquérir ainsi que leur quantité;
quels documents de comptabilité sont nécessaires pour vous.

Après le paiement nous vous envoyons la clé électronique et tous les documents nécessaires.

75
AutoFEM Software LLP http://autofem.com
Guide d'installation pour AutoFEM Lite (français) 76

Guía de instalación
de Análisis AutoFEM Lite (español)

Versión 3.x

© 2018 AutoFEM Softw are LLP

76
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 77

1. AutoFEM Analysis Installation

1.1 Requisitos para el software


Análisis AutoFEM es un plugin para el AutoCAD para el sistema operativo de Windows XP/Vista/7/8.
AutoFEM Analysis 3.x funciona con las versiones de AutoCAD 2007, 2008, 2009, 2010, 2012, 2013,
2014, 2015, 2016.
AutoFEM Analysis 3.x no funciona con versiones de AutoCAD para Mac OS. Análisis AutoFEM 3.x no
funciona con AutoCAD 2011 (x86, x64).

1.2 Desembalaje del paquete de instalación


Descomprima el paquete de instalación AutoFEM-x64.zip. Asegúrese de que ha descomprimido el
paquete de distribución de la misma capacidad que el AutoCAD instalado tiene (x64). El paquete de
instalación contiene los siguientes archivos y carpetas:

Archivos del el paquete de instalación de AutoFEM para x64

La carpeta x64 contiene archivos de servicio de Microsoft, necesarios para el trabajo de los programas
de software en el entorno de Windows.
Para AutoFEM Analysis 3.x, el archivo de la carpeta redist2017 debe estar instalado en el
sistema.
Para las versiones de AutoCAD 2010 y 2012, el archivo de la carpeta redist2008 debe estar
instalado en el sistema.
Para las versiones de AutoCAD 2013 y 2014, el archivo de la carpeta redist2010 debe estar
instalado en el sistema.
Para las versiones de AutoCAD 2015 y 2016, el archivo de la carpeta redist2012 debe estar
instalado en el sistema (normalmente, el redists2012 se está instalando con AutoCAD
2015/2016).
Para las versiones 2017 y 2018 de AutoCAD, el archivo de la carpeta redist2015 debe estar
instalado en el sistema (normalmente, el redists2015 se está instalando con AutoCAD
2017/2018).
Para AutoCAD versión 2019, el archivo de la carpeta redist2017 debe estar instalado en el
sistema (normalmente, el redists2017 se está instalando con AutoCAD 2019).
Estos archivos también se pueden descargar desde la página oficial de Microsoft Corporation.

77
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 78

1.3 Instalación del software (parte del cliente)


Para que la instalación sea un éxito, debe tener el derecho a la instalación de programas de software en
su ordenador. Active el archivo "Setup-x64.exe". Seleccione el idioma de trabajo de la asistente en el
cuadro de diálogo que aparece y pulse Aceptar. A continuación, realice las opciones del asistente.

Selección de un idioma para la instalación

Instalación de los paquetes redistribuibles de Microsoft Visual Studio

78
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 79

Instalación de AutoFEM Análisis - Paso 2

Instalación de AutoFEM Análisis - Paso 3

79
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 80

Instalación de AutoFEM Análisis - Paso 4

Instalación de AutoFEM Análisis - Paso 5

80
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 81

Instalación de AutoFEM Análisis - Paso 6

Instalación de AutoFEM Análisis - último paso

1.4 Inscripción de AutoFEM en la versión de AutoCAD instalada


Después de instalar con éxito AutoFEM Analysis, AutoFEM Launcher se inicia, lo que proporciona un
fácil acceso a los materiales que acompañan a AutoFEM (como Ayuda, Tutoriales, Verificaciones),
configuración AutoFEM, y permite iniciar AutoFEM con la versión deseable de AutoCAD. Si desea iniciar
inmediatamente el Análisis AutoFEM, haga doble clic en el botón deseado de AutoCAD o presione el
botón "Lanzar AutoCAD ...". Además, el diálogo Iniciador le permite a cualquiera ajustar la conexión

81
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 82

con el servidor de verificación de la licencia (consulte 3.4.2). El acceso al iniciador AutoFEM está
disponible en cualquier momento desde el menú Inicio y la carpeta AutoFEM Analysis Lite 3.x |
AutoFEM Analysis Lite 3.x.

El diálogo de la inscripción de AutoFEM en AutoCAD

Recuperación de la "Fema Tool" en el menú de Windows XP/Vista/7

Nota! Desde AutoCAD 2014 es posible que aparezca la ventana


siguiente mensaje cuando usted está comenzando AutoFEM que no
está registrado para la carga automática:

Haga clic en "Load" si usted quiere trabajar con AutoFEM Análisis

82
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 83

1.5 Lanzamiento de AutoCAD con de AutoFEM instalado


En la primera puesta en marcha, aparecerá el cuadro de diálogo, que ofrece para cambiar del modo de
uso de demostración con la duración de 15 días o para activar la licencia. (Para más información sobre
la activación de una licencia local, véase el punto 2.1)

Diálogo en el inicio de AutoCAD después de la instalación de Análisis AutoFEM


Nota.
En algunos casos, para la cinta con los comandos de Análisis AutoFEM a aparecer, es necesario
reiniciar manualmente espacio de trabajo 3D de AutoCAD. Para ello, utilice el comando de AutoCAD
"_WSCURRENT" con la opción "3D Modelling".
En la ventana de AutoCAD que se abrirá, la cinta con los comandos de Análisis AutoFEM debe
aparecer, como se muestra en la figura. El acceso a los comandos de AutoFEM Analysis está
disponible también en el menú correspondiente de AutoCAD.

83
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 84

Comandos de Análisis AutoFEM en el menú y AutoCAD cinta

84
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 85

Restablecimiento de espacio de trabajo en 3D de AutoCAD

85
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 86

1.6 Configuración de idioma


AutoFEM Analysis es una aplicación multilingüe. El usuario puede iniciar el software en uno de los cinco idiomas
europeos: inglés, alemán, francés, italiano o español.
En forma predeterminada, el sistema usa el lenguaje de AutoCAD en el que se inicia. Si AutoFEM no tiene dicha
interfaz de idioma (por ejemplo, turco), se utiliza la versión en inglés. El usuario puede seleccionar y configurar el
idioma de la interfaz AutoFEM presionando el cuadro combinado "Cambiar el idioma" o seleccionando un idioma
deseable en la pestaña "Ajustes de AutoFEM". El idioma seleccionado se está asignando para todas las versiones
de AutoCAD disponibles. Es posible ejecutar varias instancias de AutoCAD / AutoFEM con una interfaz de idioma
diferente simultáneamente, ejecutando AutoCAD / AutoFEM, luego cambiando la configuración de idioma y
ejecutando la siguiente instancia de AutoCAD / AutoFEM.

Configuración de idioma

86
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 87

2. Desinstalación de Análisis AutoFEM Lite


Se recomienda la desinstalación de Análisis AutoFEM para realizar en el siguiente orden. Inicie el
comando deinstalllation de Análisis AutoFEM de la carpeta 3.x AutoFEM Análisis en el menú Inicio o el
comando correspondiente en la sección Instalar/desinstalar programas en el Panel de control de
Windows.

Inicio del comando de desinstalación AutoFEM en el menú


Start | AutoFEM Analysis 3.x in Windows XP/Vista/7
Se eliminará el sistema.

87
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 88

3. AutoFEM Análisis Lite limitaciones

Algunos estudios no están disponibles para AutoFEM Analysis Lite como se muestra a continuación:

Estudios disponibles (habilitados) y no disponibles (desactivados)


Limitación para todos los estudios:
Solo se puede seleccionar un solo cuerpo sólido o superficial para un estudio.
Existe un número limitado de entidades modelo para aplicar cargas / restricciones.

Las limitaciones de las condiciones de contorno para Static, Buckling y Dynamic Analysis son las
siguientes:
Solo hay dos tipos de cargas mecánicas para el estudio mecánico: fuerza y ​presión.

88
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 89

Las cargas disponibles están habilitadas en el menú


Puedes usar solo restricciones completas (fijación inamovible).

Las restricciones disponibles están habilitadas en el menú

Las limitaciones del análisis de frecuencia son las siguientes:


Puedes encontrar solo cuatro frecuencias naturales más bajas.
Las fuerzas aplicadas al diseño no están incluidas en el cálculo.
No tiene posibilidad de resolver el sistema no fijo (espacialmente libre).

Las limitaciones del Análisis de Oscilación Armónica Forzada (Respuesta Armónica) son las siguientes:
Tienes dos tipos de cargas mecánicas para cualquier estudio (fuerza y ​presión).
No puede usar el oscilador mecánico como fuente de oscilaciones.

Las limitaciones del análisis térmico (estado estable) son:


Puede usar solo tres condiciones de contorno para el análisis térmico: temperatura, potencia térmica y
convección.

89
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 90

Las condiciones de límite térmico disponibles están habilitadas en el menú

No existen otras limitaciones relacionadas con el número de grados de libertad, informes, controles de estudio,
limitación de tiempo, etc.
Tiene un instrumento FEA completamente funcional para sus propósitos.

90
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 91

4. Preguntas más frecuentes

¿Dónde puedo obtener el apoyo con respecto a AutoFEM?

Si tiene dificultades para instalar o utilizar AutoFEM, la mejor manera de tratar de resolverlos es ir
directamente a nuestro correo electrónico de soporte técnico: support@autofem.com. Por favor, ser
claro en la descripción de su problema y nos dice la versión de Windows, AutoCAD y AutoFEM, que
está utilizando. Le recomendamos ponerse en contacto de inmediato con nosotros en lugar de buscar
en Google todas las preguntas, en relación con la instalación AutoFEM, etc, es más eficaz y da los
resultados.

¿Cuáles son los requisitos del sistema se recomienda para trabajar con AutoFEM
Analysis?

La modelización matemática de los fenómenos físicos pertenece a la clase de los problemas intensivos
en recursos que requieren recursos computacionales serios. Es por eso que, para un uso eficiente del
sistema de modelado de elementos finitos, se recomienda utilizar las computadoras más poderosas
accesibles para el usuario.

Procesador con soporte de instrucciones de 64 bits, series Intel i5, i7,


Xeon etc
RAM 8 GB min, 32 GB recomendado
Sistema Windows XP/7/8/10 64-bit
operativo
Software AutoCAD x64, AutoFEM x64

¿Qué versiones de AutoCAD funciona AutoFEM Análisis?

El sistema de análisis de elementos finitos "AutoFEM Análisis" está trabajando con AutoCAD 2010,
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 para Windows de 64 bits.

¿Funciona AutoFEM con AutoCAD 2011?

No, no lo hace. AutoFEM no funciona con AutoCAD 2011 x86/x64. Sólo AutoCAD x64 2010, 2012-2019
son totalmente compatibles.

¿Funciona el Análisis AutoFEM con AutoCAD Lite?

No, no lo funciona. AutoFEM Análisis y AutoFEM Análisis Lite se puede utilizar sólo con la versión
completa de AutoCAD, porque el espacio de modelado en 3D es necesaria para el análisis de
elementos finitos.

91
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 92

Estoy trabajando con otro sistema de CAD (Inventor, Mechanical Desktop, Solidworks).
¿Puedo utilizar AutoFEM?

AutoFEM sólo funciona en el entorno 3D de AutoCAD, que no trabaja directamente con Inventor,
Mechanical Desktop, SolidWorks, etc. Sin embargo, si usted tiene la posibilidad de utilizar AutoCAD,
puede exportar su modelo 3D a partir del sistema CAD en AutoCAD a través de SAT formato del archivo
(ACIS formato de intercambio de los archivos) y entonces usted puede intentar para proporcionar
análisis de elementos finitos de su modelo de uso de AutoFEM.

92
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 93

5. Consejos y trucos

Requisitos para el modelo sólido 3D para el análisis de elementos finitos


La calidad y la posibilidad de construir una malla de elementos finitos es dependiente de la calidad de los
modelos de volumen de la estructura. Debe tener en cuenta los siguientes requisitos para crear modelos
tridimensionales de sus productos para el análisis de elementos finitos.
No se permiten sólidos mutuos o de auto-intersección. Es imposible construir una malla de elementos
finitos para cuerpos de intersección. Antes de crear un estudio siempre debe probar su modelo en las
intersecciones de comando especial AutoCAD _INTERFERE. Este comando muestra las
intersecciones entre los cuerpos si lo son. Usted puede utilizar el comando de AutoCAD: UNION y unir
intersección cuerpos en un solo cuerpo.

Usando el comando de AutoCAD _INTERFIERE para comprobar el modelo en las intersecciones

93
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 94

Modelo correcto no tiene intersecciones entre las partes. La malla de elementos finitos puede ser construido
Entre los sólidos deben no haber espacios. Todos los cuerpos, que se incluyen en un estudio, deben
tener un contacto por una cara, o borde, o vértice, con cualquier otros sólidos del estudio. Así que en el
estudio, un cuerpo totalmente unengaged no debería existir ya que es como libremente "flotando" en el
espacio.

Model w ith gap betw een its parts. Mesh may be constructed in some cases, but calculation can be incorrect or
impossible.
En AutoCAD se puede crear un modelo 3D sólido que consta de varios volúmenes separados. Por
ejemplo, si usted tiene varios perfiles extruidos (véase el dibujo). Mallado de los dichos cuerpos es
imposible. Así que el sólido 3D que consiste en varios volúmenes por separado no está permitido en el
estudio FEA. Si usted tiene tal de sólidos en 3D necesita usar el comando de AutoCAD EDITSOLID |
_SEPARATE antes de crear el estudio FEA para separar el sólido única en varios volúmenes
independientes.

94
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 95

The 3D solid consists of multiple volumes.

That solid after using SOLIDEDIT|SEPARATE command.

Se recomienda evitar hacer el redondeo, chaflán, pequeños agujeros y elementos decorativos, que no
son importantes para la resistencia de diseño. Ellos pueden complicar la construcción de la malla de
elementos finitos y aumentar la dimensión del problema (tiempo para encontrar una solución).
Los cuerpos, unidos en un bloque se tratan como un cuerpo sólido que se obtiene mediante una unión
booleana de todos los cuerpos en el bloque. Los cuerpos en el bloque pueden cruzarse entre sí. No
debe existir separación entre los cuerpos, ya que esto generará un error de la generación de la red.

¿Cómo puedo aplicar una fuerza (o presión) a un área determinada de la pieza?

A menudo, las cargas se aplican en algún área de la parte. Utilice el comando IMPRESIÓN del AutoCAD para crear
un área de aplicación de la carga en el aspecto del modelo 3D. En primer lugar (antes de crear el estudio!), Usted
shoud dibujar la geometría, que describe el área de carga, utilizando comandos de dibujo de AutoCAD. A
continuación, utilice IMPRINT para crear una nueva faceta en la cara actual del modelo 3D. Véase las capturas de
pantalla que ilustran los pasos a continuación.

95
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 96

Dibuja el contorno de la aplicación de la carga

Utilice el comando IMPRINT

96
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 97

Seleccione el cuerpo

Seleccione el contorno

97
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 98

Elimine el contorno

Crea el Estudio y aplique la fuerza

98
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 99

6. ¿Cómo puedo comprar el AutoFEM Análisis?

Hay dos formas básicas de pagar por la versión comercial y obtener una clave de licencia.

El primer método. Usted puede utilizar los servicios de los registradores RegNow (conveniente para
los EE.UU. y algunos otros países del mundo) o ShareIt! (el más conveniente para los usuarios
europeos). Las principales ventajas de la compra de una licencia a través de RegNow o ShareIt! son:

• Diferentes opciones de pago. Estas empresas admiten diferentes tipos de pagos electrónicos,
tarjetas bancarias, así como las transferencias bancarias sin dinero en efectivo. Asimismo,
proporcionan a un comprador todos los documentos contables necesarios (facturas, etc.), si es
necesario.
• Costo fijo. RegNow y ShareIt! suministran licencias AutoFEM por el mismo precio que se muestra en
nuestro sitio web. Si usted necesita un conjunto personalizado de módulos que no está en el registro de
nuestro sitio web, por favor, póngase en contacto con nosotros por el correo electrónico
sales@autofem.com, y nosotros le construiremos un encargo individual.
• Rapidez de la compra. Si usted paga por transferencia electrónica de fondos (por ejemplo, por el
PayPal) o tarjeta de crédito, en general, su clave de licencia le viene a usted a través del correo
electrónico dentro de pocos minutos después del pago.
• Seguridad. Compra a través del RegNow o ShareIt! es la forma la más segura de comprar una
licencia para el AutoFEM Análisis, porque usted paga el dinero al intermediario que puede actuar como
un árbitro independiente, y por lo tanto garantiza que usted recibirá su clave de licencia en la
configuración que ordene.

El segundo método. Usted puede pagar por la licencia directamente a la compañía (AutoFEM Software
LLP). Para eso, usted tiene que mandar una solicitud por el correo electrónico a la dirección
sales@autofem.com y nosotros le pasaremos una factura para el pago. La orden debe especificar:

• El nombre y la dirección jurídica de su empresa;


• El nombre y los apellidos del director de la empresa;
• El nombre y los apellidos, tan bien como datos de contacto de la persona responsable por las cuestiones
técnicas.
• La configuración exacta (el conjunto) de los módulos que desea comprar y su cantidad;
• Registros contables que le hace falta.

Después de pagar por nuestra factura, le enviaremos su llave electrónica y los documentos necesarios.

99
AutoFEM Software LLP http://autofem.com
Guía de instalación de Análisis AutoFEM Lite(español) 100

Guida all'installazione
per AutoFEM (italiano)

Versione 3.x

© 2018 AutoFEM Softw are LLP

100
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 101

1. Installazione di AutoFEM

1.1 Requisiti per il software


AutoFEM è un plugin per AutoCAD per il sistema operativo di Windows XP/Vista/7/8/10 64 bit.
AutoFEM Analysis 3.x è compatibile con le versioni di AutoCAD x64 2010, 2012, 2013, 2014, 2015,
2016, 2017, 2018, 2019.
AutoFEM Analysis 3.x non funziona con le versioni di AutoCAD per Mac OS. Analisi AutoFEM 3.x non
funziona con AutoCAD 2011 (x86, x64).

1.2 Disimballaggio del pacchetto di installazione


Disimballare il pacchetto di installazione autofem-x64.zip. Assicurarsi di aver decompresso il pacchetto
distributivo della stessa capacità che il vostro AutoCAD installato ha (x64). Il pacchetto di installazione
contiene i seguenti file e cartelle:

I file di AutoFEM pacchetto distributivo

La cartella x64 contiene i file di servizio Microsoft, necessari per il lavoro dei programmi software
nell'ambiente Windows.
Per AutoFEM Analysis 3.x il file dalla cartella redist2017 deve essere installato nel sistema.
Per le versioni di AutoCAD 2010 e 2012, il file dalla cartella redist2008 deve essere installato nel
sistema.
Per le versioni di AutoCAD 2013 e 2014, il file dalla cartella redist2010 deve essere installato nel
sistema.
Per le versioni AutoCAD 2015 e 2016, il file dalla cartella redist2012 deve essere installato nel
sistema (normalmente, redists2012 viene installato con AutoCAD 2015/2016).
Per le versioni AutoCAD 2017 e 2018, il file dalla cartella redist2015 deve essere installato nel
sistema (normalmente, redists2015 viene installato con AutoCAD 2017/2018).
Per AutoCAD versione 2019 il file dalla cartella redist2017 deve essere installato nel sistema
(normalmente, redists2017 viene installato con AutoCAD 2019).
Questi file possono anche essere scaricati dal sito ufficiale di Microsoft Corporation.

1.3 Installazione del software (parte del cliente)


Per l'installazione di successo, è necessario avere il diritto di installazione di programmi software sul
vostro computer. Avvi il file "Setup-x64.exe". Selezioni la lingua per il lavoro della procedura guidata nella
finestra di dialogo che appare e prema OK. Quindi, esegua le opzioni della procedura guidata.

101
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 102

Selezione di una lingua per l'installazione

Installazione dei pacchetti ridistribuibili di Microsoft Visual Studio

102
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 103

Installazione di AutoFEM - Fase 2

Installazione di AutoFEM - Fase 3

103
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 104

Installazione di AutoFEM - Fase 4

Installazione di AutoFEM - Fase 5

104
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 105

Installazione di AutoFEM - passo finale

1.4 Registrazione di AutoFEM nella versione di AutoCAD installata


Dopo aver completato con successo l'installazione di AutoFEM Analysis, AutoFEM Launcher è in fase di
avvio, che fornisce un facile accesso ai materiali di accompagnamento AutoFEM (come Guida,
Tutorials, Verifiche), AutoFEM e consente di avviare AutoFEM con la versione AutoCAD desiderata. Se si
desidera avviare immediatamente AutoFEM Analysis, fare doppio clic sul pulsante AutoCAD desiderabile
o premere il pulsante "Avviare AutoCAD ...". Inoltre, la finestra di dialogo Launcher consente a
chiunque di regolare la connessione con il server di verifica della licenza (vedere 3.4.2). L'accesso
all'AutoFEM Launcher è disponibile in qualsiasi momento dal menu Start e cartella AutoFEM Analysis
Lite 3.x | AutoFEM Analysis Lite 3.x.

105
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 106

Finestra di registrazione di AutoFEM in AutoCAD

Recupero di "FEMA Tool" dal menu Windows XP/Vista/7


Nota! Dal momento che AutoCAD 2014 è possibile visualizzare il
seguente messaggio quando si avvia AutoFEM che non è registrato
per caricamento automatico:

Fare clic su Load, se si vuole lavorare con AutoFEM

1.5 Avvio di AutoCAD con AutoFEM installato


Dopo l'installazione del AutoFEM e la sua registrazione in AutoCAD, avvi l'AutoCAD per poter iniziare a
lavorare con AutoFEM. Alla prima volta, viene visualizzata la finestra di dialogo, offrendo per attivare la

106
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 107

modalità di utilizzo demo della durata di 15 giorni o per attivare la licenza. (Per i dettagli di attivazione di
una licenza locale, vedi 2.1)

Dialog all'inizio di AutoCAD dopo l'installazione di AutoFEM

Nota.
In alcuni casi, per il nastro con i comandi AutoFEM di apparire, è necessario reimpostare
manualmente lavoro 3D di AutoCAD. Per fare questo, utilizzare il comando "_WSCURRENT"
AutoCAD con l'opzione "3D Modeling".
Nella finestra di AutoCAD che sarà aperto, il nastro con i comandi di AutoFEM deve apparire, come è
mostrato nella figura. L'accesso ai comandi AutoFEM è disponibile anche dal rispettivo menu di
AutoCAD.

107
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 108

Comandi AutoFEM nel menu e AutoCAD nastro

108
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 109

Ripristino del 3D Area di lavoro di AutoCAD

109
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 110

1.6 Impostazioni della lingua


AutoFEM Analysis è un'applicazione multilingue. L'utente può avviare il software in una delle cinque
lingue europee: inglese, tedesco, francese, italiano o spagnolo.
Di default, il sistema utilizza la lingua di AutoCAD in cui viene lanciato. Se AutoFEM non ha un'interfaccia
linguistica di questo tipo (ad esempio, il turco), viene utilizzata la versione inglese. L'utente può
selezionare e impostare la lingua dell'interfaccia AutoFEM premendo la casella combinata "Cambia
lingua" o selezionando una lingua desiderata nella scheda "Impostazioni". La lingua selezionata viene
assegnata per tutte le versioni di AutoCAD disponibili. È possibile avviare diverse istanze di AutoCAD /
AutoFEM con interfaccia di linguaggio diversa simultaneamente, eseguendo AutoCAD / AutoFEM, quindi
modificando le impostazioni della lingua ed eseguendo la successiva istanza di AutoCAD / AutoFEM.

Impostazioni della lingua

110
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 111

2. Disinstallazione di AutoFEM
La disinstallazione di AutoFEM è consigliabile eseguire nel seguente ordine. Eseguite il comando
deinstalllation di AutoFEM dalla cartella AutoFEM Analysis 3.x nel menu Inicio (Start) o utilizzate il
comando corrispondente nella sezione Installare / disinstallare i programmi dal pannello di controllo di
Windows.

Inizio del comando AutoFEM disinstallazione dal menu


Start | AutoFEM Analysis Lite 3.x in Windows XP/Vista/7
Il sistema sarà rimosso.

111
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 112

3. Limitazioni di AutoFEM Lite

Alcuni studi non sono disponibili per AutoFEM Analysis Lite come illustrato di seguito:

Studi disponibili (abilitati) e non disponibili (disabilitati)


Limitazione per tutti gli studi:
Solo un singolo corpo solido o di superficie può essere selezionato per uno studio.
Esiste un numero limitato di entità modello per l'applicazione di carichi / restrizioni.

Le limitazioni delle condizioni al contorno per l'analisi statica, l'instabilità e l'analisi dinamica sono le
seguenti:
Esistono solo due tipi di carichi meccanici per lo studio meccanico: forza e pressione.

112
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 113

I carichi disponibili sono abilitati nel menu


È possibile utilizzare solo la restrizione completa (fissazione inamovibile).

I vincoli disponibili sono abilitati nel menu

I limiti di analisi della frequenza sono i seguenti:


Puoi trovare solo quattro frequenze naturali più basse.
Le forze applicate al design non sono incluse nel calcolo.
Non hai possibilità di risolvere un sistema non fisso (spazialmente libero).

I limiti dell'analisi dell'oscillazione armonica forzata (Risposta armonica) sono i seguenti:


Hai due tipi di carichi meccanici per qualsiasi studio (forza e pressione).
Non è possibile utilizzare l'oscillatore meccanico come fonte di oscillazioni.

I limiti dell'analisi termica (stato stazionario) sono:


È possibile utilizzare solo tre condizioni al contorno per l'analisi termica: temperatura, potenza termica e
convezione.

113
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 114

Le condizioni al contorno termico disponibili sono abilitate nel menu

Non ci sono altre limitazioni riguardo al numero di gradi di libertà, rapporti, controlli dello studio, limiti di tempo ecc.
Hai uno strumento FEA perfettamente funzionante per i tuoi scopi.

114
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 115

115
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 116

4. Domande Frequenti

Quale verione di AutoCAD lavora con AutoFEM Analysis?

Il sistema ad elemnti finiti "AutoFEM Analysis" lavora correttamente con le versioni complete di AutoCAD
x64 2010, 2012 - 2019 per Windows su piattaforma 64-bit.

Quali sono i requisiti di sistema per operare con AutoFEM Analysis?

La modellizzazione matematica dei fenomeni fisici appartiene alla classe dei problemi ad alta intensità di
risorse che richiedono risorse computazionali gravi. Ecco perché, per un uso efficiente del sistema di
modellazione degli elementi finiti, si consiglia di utilizzare i computer più potenti accessibili all'utente.

Parametri del computer per lavorare in modo efficiente e professionale con AutoFEM Analysis

Processore con supporto di istruzioni a 64 bit, Intel i5, i7, Xeon series ecc
RAM 8 GB min, 32 GB recomended
Sistema Operativo Windows XP/7/8/10 64-bit
Software AutoCAD x64, AutoFEM x64

Funziona AutoFEM su AutoCAD 2011?

No, al momento non è possibile a causa di problemi con la compatibilità con AutoCAD 2011.

AutoFEM Analisys funziona su AutoCAD versione Lite?

No. AutoFEM Analysis e AutoFEM Analysis Lite possono essere usate solo con versioni FULL di
AutoCAD perchè è necessario l'ambiente di modellazione 3D per poter usufruire dell'analisi ad elementi
finiti.

5. Consigli e suggerimenti

Requisiti per l'analisi ad elementi finiti di modelli tridimensionali

La qualità e la possibilità di costruire un modello ad elementi finiti è fortemente dipendente dalla qualità
del modello, quindi quando si disegna un modello 3D bisogna avere maggiori accorgimenti rispetto alla
modellazione tradizionale con AutoCAD. Si dovrebbe tenere conto dei seguenti parametri nella
modellazione di un componente:.

Le intersezioni tra i corpi no sono accettate. E' impossibile costruire una mesh agli elementi finiti di
corpi intersecanti.. Prima di creare uno studio bisogna sempre testare le interferenze con AutoCAD
tramite il comado _INTERFERE. Questo comando mostra le interferenze tra i corpi contenute nel
modello. Si può usare il comando di AutoCAD UNION e UNITE per visualizzare l'intero corpo

116
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 117

Nella figuar ci sono molte intersezioni è impossibile creare uno studio agli elementi finiti

Non ci devono essere spazi tra i corpi. Tutti i corpi aggiunti in uno studio devono avere una faccia o
vertice di contatto con il corpo adiacente.

I modelli con lacune non sono ammessi

I corpi 3D devono essre avvicinati per poter creare la mesh ad elementi finiti.
In AutoCAD si può creare un modello 3D che è composto da volumi separati. Per esempio si estrude
un profilo multiplo (vedi figura). Creare la mesh per questo tipo di corpi è impossibile quindi i solidi
composti da più parti non sono accettabili nell'analisi FEA.. Se si ha una situazione di solidi multipli
bisogna utilizzare il comando AutoCAD SOLIDEDIT|SEPARETE prima si cominciare l'analisi FEA in
modo tale da poter ottenere solidi separati.

117
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 118

Modello 3D composto da multipli uniti di volume

Modello 3D dopo aver usato il comando SOLIDEDIT|SEPARATE di AutoCAD

Si raccomanda di eliminare elementi non importanti all'analisi strutturale, questi potrebbero


complicare l'analisi e aimentare i tempi di analisi. Elemnti come fori, filettature, gole ecc, devono
essere presenti per verificare la loro influenza sul modello.
I corpi uniti in blocco sono trattati come un unico solido creato tramite operazioni booleane. I corpi
non devono interagire tra loro e non devono essere presenti spazio vuoti. Se questo accade
potrebbero insorgere errori.

Come posso applicare una forza (o pressione) per una certa area della parte?

Spesso i carichi vengono applicati ad una certa zona della parte. Usate il comando IMPRINT del
AutoCAD per creare una zona di applicazione del carico su una faccia del modello 3D. In primo luogo
(prima di creare lo studio!), Dovreste disegnare la geometria, che descrive l'area di carico, utilizzando
i comandi di disegno di AutoCAD. Quindi utilizzare IMPRINT per creare una faccia nuova sulla faccia
attuale del modello 3D. Vedete le screen-shots, illustrando questi passaggi, qui di seguito.

118
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 119

Disegnate il contorno di carico applicando

Utilizzate il comando _IMPRINT

119
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 120

Selezionate il corpo

Selezionate il contorno

120
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 121

Eliminate il contorno

Create lo Studio e applicate la forza

121
AutoFEM Software LLP http://autofem.com
Guida all'installazione per AutoFEM (italiano) 122

6. Come acquistare AutoFEM?


Ci sono due modi principali per pagare per la versione commerciale e ottenere la chiave di licenza .

Primo modo. È possibile utilizzare i servizi di registrazione società RegNow ( è conveniente per gli Stati
Uniti e in altri paesi in tutto il mondo ) o ShareIt! ( che è più comodo per gli utenti europei ) . I principali
vantaggi di acquistare la licenza tramite RegNow o ShareIt!

Varietà di opzioni di pagamento. Queste aziende accettano diversi tipi di pagamenti elettronici, carte
di credito, nonché i trasferimenti bancari non in contanti. Inoltre offrono all'acquirente tutti i documenti
contabili necessari (fatture, ecc), se ne avete bisogno.
Valore fisso. RegNow e ShareIt! fornire licenze per AutoFEM allo stesso costo che è riportata sul
nostro sito. Se avete bisogno di un insieme non standard di moduli che non è disponibile sul sito del
registrar, si prega di sales@autofem.com scrivere, e noi lo accetteremo come singolo ordine.
Velocità di acquisto. Se pagate tramite trasferimento elettronico (es. PayPal) o dalla carta di credito,
quindi, di regola, la chiave di licenza sarà dato a voi da una email appena in pochi minuti dopo che il
pagamento è effettuato.
Sicurezza. L'acquisto tramite RegNow o ShareIt! è il modo più sicuro di ottenere la licenza per
AutoFEM, come si paga soldi per il mediatore, che può essere un arbitro indipendente e, quindi,
garantisce che si necessariamente ottenere la chiave di licenza con la configurazione che hai
ordinato.

Secondo modo. È possibile pagare il costo della licenza direttamente sul conto della nostra società
(AutoFEM Software LLP). Hai solo bisogno di richiedere via email sales@autofem.com, e noi
pubblicheremo la bolletta. L'ordine deve indicare:

Nome e sede legale della vostra azienda;


Il nome della società capofila;
Nome e contatti di una persona che possa risolvere i problemi tecnici;
Configurazione Strict (set) di moduli che si desidera acquistare e il loro numero, e
Che documentazione contabile aggiuntivo è necessario.

Dopo che si paga il conto, vi invieremo il numero di serie e la documentazione necessaria.

122
AutoFEM Software LLP http://autofem.com
© © 2018 AutoFEM Software LLP Product and company names mentioned in this manual may be trademarks or
registered trademarks of their respective companies.
The author assumes no responsibility with regard to the performance or use of these products. All understandings,
agreements, or warranties, if any, take place directly between the vendors and the prospective users. Every effort
has been made to ensure that the information in this manual is accurate. The author is not responsible for printing or
clerical errors.The product described in this manual incorporates copyright protection technology that is protected by
method claims of certain patents and other intellectual property rights.

Das könnte Ihnen auch gefallen