Beruflich Dokumente
Kultur Dokumente
Media preparation
Masterclave
Sample preparation
Plate Tubes
°C
Risk of burn with agar at 100°
Glass handling:
Risk of cut
No traceability
CLASSIC MEDIA PREPARATION
3. Autoclaving bottles
Drawbacks:
Masterclave 528
(5-28 litres)
Masterclave 60
(10-60 litres)
Masterclave 09
(1-9 litres)
MASTERCLAVE PRINCIPLE
Rapid cooling by a
water cooling
device
Homogeneous
temperature by
large paddle stirrer
Masterclave 60
STANDARDIZATION
The cycle parameters controlled by microprocessor ensure
repeatability of each media preparation.
(heating, sterilization, cooling, dispensing).
40 free programs
MASTERCLAVE KEY POINT
PRODUCTIVITY
From 1 to 60 liters in one batch
SIMPLICITY
Easy handling : adding powder + distilled water and starting cycle.
(10 min/cycle)
Additional benefits:
Less cleaning bottles operation (ecological)
MASTERCLAVE KEY POINT
QUALITY
Insurance to have fresh media everyday.
SECURITY
In compliance with the EC standards, this equipment is equipped with
various safety devices to ensure safe operation for the operator
Safety devices:
protection cover locking
safety valve
thermal cut off switch
Several alarms:
temperature variation error
short circuit or breakage of the probe
MASTERCLAVE KEY POINT
TRACEABILITY
A printer can be connected to ensure a total
traceability for quality control purposes:
- operator’s name
-batch number
-program used
-date/time
-cycle curve
-
MASTERCLAVE KEY POINT
TRACEABILITY
MASTERCLAVE CYCLE
Sterilization
Dispensing
Temperature
Time
MASTERCLAVE CYCLE
Sterilization
Step
Dispensing
Temperature
Time
MASTERCLAVE CYCLE
Step 2
Step 3
Step 1 Dispensing
Temperature
Time
Addition
Addition Addition
MASTERCLAVE KEY POINT
STANDARDIZATION
PRODUCTIVITY
SIMPLICITY
QUALITY
SECURITY
TRACEABILITY
MASTERCLAVE KEY POINT
MASTERCLAVE 09
LID VESSEL
Temperature TRACEABILITY
probe inside the
Optional ticket printer
media
Capacity: 1to9L
Preparation time:
45min for 1 liter (sterilization 121°C, 15min)
Dimensions
w x h x d= 500 x 435 x 590mm
Installation
Electrical connection: 230V, 16A
Water supply:
Maximum hardness: 7°TH
Temperatures: 6 to 20°C
Pressure: 1 to 3 bar
Minimum flow: 6liters per minute
MASTERCLAVE 528
LID INTERFACE
Easy single opening
and closing handle
Easy access to sterile
media by a cap on the
lid
Grpahic screen for easy
programing
Clear visualisation of settings
VESSEL and the temperature curve
Status indicator lights and beeps
inform the operator
TRACEABILITY
Optional printer
Double skin vessel CLEANING Connection to PC
(5 to 28 liters of media)
Temperature probe at the bottom MOBILITY
of the vessel
Designed to be mobile
Hole for a second temperature Easy cleaning with gate to drain
probe (external control) vessel Four larges wheels
Removable magnetic stirrer Access protected by a safety Two larges handles
hatch protection against shocks
Stirring speed may adjustable
MASTERCLAVE 528
Capacity: 5 to 28L
MAIN APPLICATIONS
Combine system for contract labs:
Preparation time: 28 liters of diluent in the morning
90 min for 28liters of media (121°C/15min) 5-10 liters of agar in the afternoon
LID INTERFACE
VESSEL
Graphic screen for easy
programing
Clear visualization of settings
and the temperature curve
Beeps inform the operator
Capacity: 10 TO 60L
MAIN APPLICATION
Preparation time: - Agar for agar manufacturer
120 min for 60 liters of media (121°C/15min) - Diluent for labs
Dimensions
w x h x d= 1,03 x 0,65x 1,10m
Installation
Electrical connection:
400V triphase with neutral, 20A per phase
OR
230V triphase without neutral 32A per phase
Water supply
Maximum hardness: 7°TH
Temperatures: 6 to 20°C
Pressure: 1 to 3 bar
Minimum flow: 6liters per minute
PREPARE & DISPENSE MEDIA
Masterclave
Agar in plate
APS One
Sample
dilution Dilumat
ACCURACY
accuracy of dispensed volume +/- 0,25mL (<20mL)
automatic calibration
QUALITY
work in compliance with GLP
sterile environment for the dispensing
combined with Masterclave: dispensing at low temperature
reduce condensation
rapid cooling
AUTONOMY
Complete walk away system productivity
SPEED
750 plates/hour (15mL)
650 plates/hour (18mL)
MEDIA DISPENSING KEY POINT
APS ONE KEY POINT
SIMPLICITY
User friendly interface:
• Big colour screen
• Intuitive display (icon)
Direct access to main application
PMi
APS One
XY500
DISPENSING MEDIA IN TUBE
DISPENSING MEDIA : PMi
PMi XY500
Semi-automatic Complete walk away system
4 differents 96 tubes
Large capacity: rack
up to 500 tubes in one cycle Easy to program
Step by step program Flexible loading
XY500 FEATURES
CAPACITY MOTOR
• 504 tubes in one cycle The step by step motor allows a very big
• Speed: 1000 tubes/hour (9mL) accuracy for the dispensing
• Maximum height : 210 mm In case of of arm jamming, once the problem
solved, the cycle starts exactly from where it
stopped.
APPLICATION
For dispensing liquid (sterile or not) in tubes, INTERFACE
bottles, Erlen Meyer… Numerical
keyboard and
LCD screen
allows a simple
DIMENSIONS programming
• L x P x H = 710 x 650 x 450 mm with storage of
the rack
• Weight : 25kg
configurations
Discussion…